powerpc: BSC9131/2: Move CONFIG_BSC9131/2 to Kconfig options
Replace CONFIG_BSC9131, CONFIG_BSC9132 with ARCH_BSC9131, ARCH_BSC9132
Kconfig options.
Also drop #ifdef in BSC9131RDB.h since it is redundant.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 5ea02b5..4fd2ea6 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -23,10 +23,12 @@
config TARGET_BSC9131RDB
bool "Support BSC9131RDB"
+ select ARCH_BSC9131
select SUPPORT_SPL
config TARGET_BSC9132QDS
bool "Support BSC9132QDS"
+ select ARCH_BSC9132
select SUPPORT_SPL
config TARGET_C29XPCIE
@@ -177,6 +179,12 @@
endchoice
+config ARCH_BSC9131
+ bool
+
+config ARCH_BSC9132
+ bool
+
config ARCH_MPC8544
bool
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 744c781..e545112 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -96,7 +96,7 @@
obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
obj-$(CONFIG_PPC_B4420) += b4860_serdes.o
obj-$(CONFIG_PPC_B4860) += b4860_serdes.o
-obj-$(CONFIG_BSC9132) += bsc9132_serdes.o
+obj-$(CONFIG_ARCH_BSC9132) += bsc9132_serdes.o
obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
obj-$(CONFIG_PPC_T1042) += t1040_serdes.o
obj-$(CONFIG_PPC_T1020) += t1040_serdes.o
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 5c97e69..80b3b74 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -579,7 +579,7 @@
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_A005812
-#elif defined(CONFIG_BSC9131)
+#elif defined(CONFIG_ARCH_BSC9131)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
@@ -598,7 +598,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_ESDHC_HC_BLK_ADDR
-#elif defined(CONFIG_BSC9132)
+#elif defined(CONFIG_ARCH_BSC9132)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_FSL_SDHC_V2_3
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 2a759c8..85278b3 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -82,7 +82,7 @@
#ifndef CONFIG_MPC8641
LAW_TRGT_IF_PCIE_1 = 0x02,
#endif
-#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
+#if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132)
LAW_TRGT_IF_OCN_DSP = 0x03,
#else
#if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020)
@@ -95,7 +95,7 @@
LAW_TRGT_IF_PLATFORM_SRAM = 0x0a,
LAW_TRGT_IF_DDR_INTRLV = 0x0b,
LAW_TRGT_IF_RIO = 0x0c,
-#if defined(CONFIG_BSC9132)
+#if defined(CONFIG_ARCH_BSC9132)
LAW_TRGT_IF_CLASS_DSP = 0x0d,
#else
LAW_TRGT_IF_RIO_2 = 0x0d,
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 64c4435..74c2959 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2129,7 +2129,7 @@
& MPC85xx_PORDEVSR2_DDR_SPD_0) \
>> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT))
#else
-#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
+#if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132)
#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
#else
#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
@@ -2172,7 +2172,7 @@
#if defined(CONFIG_P1010)
#define MPC85xx_PORDEVSR_IO_SEL 0x00600000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
-#elif defined(CONFIG_BSC9132)
+#elif defined(CONFIG_ARCH_BSC9132)
#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17
#elif defined(CONFIG_PPC_C29X)
@@ -2296,7 +2296,7 @@
#define MPC85xx_PMUXCR_SPI_MASK 0x00600000
#define MPC85xx_PMUXCR_SPI 0x00000000
#endif
-#if defined(CONFIG_BSC9131)
+#if defined(CONFIG_ARCH_BSC9131)
#define MPC85xx_PMUXCR_TSEC2_DMA_GPIO_IRQ 0x40000000
#define MPC85xx_PMUXCR_TSEC2_USB 0xC0000000
#define MPC85xx_PMUXCR_TSEC2_1588_PPS 0x10000000
@@ -2340,7 +2340,7 @@
#define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002
#define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003
#endif
-#ifdef CONFIG_BSC9132
+#ifdef CONFIG_ARCH_BSC9132
#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000
#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000
#endif
@@ -2379,8 +2379,8 @@
#define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000
#define MPC85xx_PMUXCR2_USB 0x00150000
#endif
-#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
-#if defined(CONFIG_BSC9131)
+#if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132)
+#if defined(CONFIG_ARCH_BSC9131)
#define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000
#define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000
#define MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42 0xC0000000
@@ -2425,7 +2425,7 @@
#define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002
#endif
u32 pmuxcr3;
-#if defined(CONFIG_BSC9131)
+#if defined(CONFIG_ARCH_BSC9131)
#define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000
#define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000
#define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000
@@ -2441,7 +2441,7 @@
#define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000
#define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000
#endif
-#ifdef CONFIG_BSC9132
+#ifdef CONFIG_ARCH_BSC9132
#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00
#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000
#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000
@@ -2504,7 +2504,7 @@
u32 ddrdllcr; /* DDR DLL control */
u8 res14[12];
u32 lbcdllcr; /* LBC DLL control */
-#if defined(CONFIG_BSC9131)
+#if defined(CONFIG_ARCH_BSC9131)
u8 res15[12];
u32 halt_req_mask;
#define HALTED_TO_HALT_REQ_MASK_0 0x80000000
@@ -2988,7 +2988,7 @@
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
#define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000
-#if defined(CONFIG_BSC9132)
+#if defined(CONFIG_ARCH_BSC9132)
#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000
#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \
(CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET)