lib: optee: remove the duplicate CONFIG_OPTEE
The configuration CONFIG_OPTEE is defined 2 times:
1- in lib/optee/Kconfig for support of OPTEE images loaded by bootm command
2- in drivers/tee/optee/Kconfig for support of OP-TEE driver.
It is abnormal to have the same CONFIG define for 2 purpose;
and it is difficult to managed correctly their dependencies.
Moreover CONFIG_SPL_OPTEE is defined in common/spl/Kconfig
to manage OPTEE image load in SPL.
This definition causes an issue with the macro CONFIG_IS_ENABLED(OPTEE)
to test the availability of the OP-TEE driver.
This patch cleans the configuration dependency with:
- CONFIG_OPTEE_IMAGE (renamed) => support of OP-TEE image in U-Boot
- CONFIG_SPL_OPTEE_IMAGE (renamed) => support of OP-TEE image in SPL
- CONFIG_OPTEE (same) => support of OP-TEE driver in U-Boot
- CONFIG_OPTEE_LIB (new) => support of OP-TEE library
After this patch, the macro have the correct behavior:
- CONFIG_IS_ENABLED(OPTEE_IMAGE) => Load of OP-TEE image is supported
- CONFIG_IS_ENABLED(OPTEE) => OP-TEE driver is supported
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
diff --git a/arch/arm/mach-rockchip/sdram.c b/arch/arm/mach-rockchip/sdram.c
index 28c379e..705ec7b 100644
--- a/arch/arm/mach-rockchip/sdram.c
+++ b/arch/arm/mach-rockchip/sdram.c
@@ -45,7 +45,7 @@
gd->bd->bi_dram[0].start = 0x200000;
gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start;
#else
-#ifdef CONFIG_SPL_OPTEE
+#ifdef CONFIG_SPL_OPTEE_IMAGE
struct tos_parameter_t *tos_parameter;
tos_parameter = (struct tos_parameter_t *)(CONFIG_SYS_SDRAM_BASE +
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 34f6fc2..8a8a971 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1263,11 +1263,11 @@
Enable access to the AM33xx RTC and select the external 32kHz clock
source.
-config SPL_OPTEE
- bool "Support OP-TEE Trusted OS"
+config SPL_OPTEE_IMAGE
+ bool "Support OP-TEE Trusted OS image in SPL"
depends on ARM
help
- OP-TEE is an open source Trusted OS which is loaded by SPL.
+ OP-TEE is an open source Trusted OS which is loaded by SPL.
More detail at: https://github.com/OP-TEE/optee_os
config SPL_OPENSBI
diff --git a/common/spl/Makefile b/common/spl/Makefile
index cb15c8e..db8fd36 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_$(SPL_TPL_)NET) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
-obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
+obj-$(CONFIG_$(SPL_TPL_)OPTEE_IMAGE) += spl_optee.o
obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index ed94d51..a9304d4 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -776,7 +776,7 @@
spl_invoke_atf(&spl_image);
break;
#endif
-#if CONFIG_IS_ENABLED(OPTEE)
+#if CONFIG_IS_ENABLED(OPTEE_IMAGE)
case IH_OS_TEE:
debug("Jumping to U-Boot via OP-TEE\n");
spl_board_prepare_for_optee(spl_image.fdt_addr);
diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
index 0bf91d6..a8b1c42 100644
--- a/configs/evb-rk3229_defconfig
+++ b/configs/evb-rk3229_defconfig
@@ -28,7 +28,7 @@
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
-CONFIG_SPL_OPTEE=y
+CONFIG_SPL_OPTEE_IMAGE=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB_MASS_STORAGE=y
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
index efb2a3e..eca9f5c 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288_defconfig
@@ -25,7 +25,7 @@
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
-CONFIG_SPL_OPTEE=y
+CONFIG_SPL_OPTEE_IMAGE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
index c744c3a..df64307 100644
--- a/configs/odroid-go2_defconfig
+++ b/configs/odroid-go2_defconfig
@@ -98,7 +98,7 @@
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_SOUND=y
CONFIG_SYSRESET=y
-CONFIG_OPTEE=y
+CONFIG_OPTEE_LIB=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/include/tee/optee.h b/include/tee/optee.h
index ebdfe5e..2928597 100644
--- a/include/tee/optee.h
+++ b/include/tee/optee.h
@@ -43,7 +43,7 @@
return optee_image_get_entry_point(hdr) - sizeof(struct optee_header);
}
-#if defined(CONFIG_OPTEE)
+#if defined(CONFIG_OPTEE_IMAGE)
int optee_verify_image(struct optee_header *hdr, unsigned long tzdram_start,
unsigned long tzdram_len, unsigned long image_len);
#else
@@ -57,7 +57,7 @@
#endif
-#if defined(CONFIG_OPTEE)
+#if defined(CONFIG_OPTEE_IMAGE)
int optee_verify_bootm_image(unsigned long image_addr,
unsigned long image_load_addr,
unsigned long image_len);
@@ -70,7 +70,7 @@
}
#endif
-#if defined(CONFIG_OPTEE) && defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OPTEE_LIB) && defined(CONFIG_OF_LIBFDT)
int optee_copy_fdt_nodes(void *new_blob);
#else
static inline int optee_copy_fdt_nodes(void *new_blob)
diff --git a/lib/Makefile b/lib/Makefile
index 09e380e..962470f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -16,7 +16,7 @@
obj-$(CONFIG_OF_LIVE) += of_live.o
obj-$(CONFIG_CMD_DHRYSTONE) += dhry/
obj-$(CONFIG_ARCH_AT91) += at91/
-obj-$(CONFIG_OPTEE) += optee/
+obj-$(CONFIG_OPTEE_LIB) += optee/
obj-$(CONFIG_ASN1_DECODER) += asn1_decoder.o
obj-y += crypto/
diff --git a/lib/optee/Kconfig b/lib/optee/Kconfig
index 3290b66..3072c28 100644
--- a/lib/optee/Kconfig
+++ b/lib/optee/Kconfig
@@ -1,23 +1,27 @@
-config OPTEE
+config OPTEE_LIB
+ bool "Support OPTEE library"
+ default y if OPTEE || OPTEE_IMAGE
+ help
+ Selecting this option will enable the shared OPTEE library code.
+
+config OPTEE_IMAGE
bool "Support OPTEE images"
help
- U-Boot can be configured to boot OPTEE images.
- Selecting this option will enable shared OPTEE library code and
- enable an OPTEE specific bootm command that will perform additional
- OPTEE specific checks before booting an OPTEE image created with
- mkimage.
+ Selecting this option to boot OPTEE images.
+ This option enable the OPTEE specific checks done before booting
+ an OPTEE image created with mkimage
config OPTEE_LOAD_ADDR
hex "OPTEE load address"
default 0x00000000
- depends on OPTEE
+ depends on OPTEE_LIB
help
The load address of the bootable OPTEE binary.
config OPTEE_TZDRAM_SIZE
hex "Amount of Trust-Zone RAM for the OPTEE image"
default 0x0000000
- depends on OPTEE
+ depends on OPTEE_LIB
help
The size of pre-allocated Trust Zone DRAM to allocate for the OPTEE
runtime.
@@ -25,7 +29,7 @@
config OPTEE_TZDRAM_BASE
hex "Base address of Trust-Zone RAM for the OPTEE image"
default 0x00000000
- depends on OPTEE
+ depends on OPTEE_LIB
help
The base address of pre-allocated Trust Zone DRAM for
the OPTEE runtime.
@@ -33,7 +37,7 @@
config BOOTM_OPTEE
bool "Support OPTEE bootm command"
select BOOTM_LINUX
- depends on OPTEE
+ select OPTEE_IMAGE
help
Select this command to enable chain-loading of a Linux kernel
via an OPTEE firmware.
diff --git a/lib/optee/Makefile b/lib/optee/Makefile
index b692311..9befe60 100644
--- a/lib/optee/Makefile
+++ b/lib/optee/Makefile
@@ -2,4 +2,4 @@
#
# (C) Copyright 2017 Linaro
-obj-$(CONFIG_OPTEE) += optee.o
+obj-y += optee.o
diff --git a/lib/optee/optee.c b/lib/optee/optee.c
index 672690d..5676785 100644
--- a/lib/optee/optee.c
+++ b/lib/optee/optee.c
@@ -20,6 +20,7 @@
"\n\theader lo=0x%08x hi=0x%08x size=0x%08lx arch=0x%08x" \
"\n\tuimage params 0x%08lx-0x%08lx\n"
+#if defined(CONFIG_OPTEE_IMAGE)
int optee_verify_image(struct optee_header *hdr, unsigned long tzdram_start,
unsigned long tzdram_len, unsigned long image_len)
{
@@ -70,6 +71,7 @@
return ret;
}
+#endif
#if defined(CONFIG_OF_LIBFDT)
static int optee_copy_firmware_node(ofnode node, void *fdt_blob)