diff --git a/MAINTAINERS b/MAINTAINERS
index dd24697..0c7efde 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -99,6 +99,7 @@
 F:	drivers/mmc/bcm2835_sdhci.c
 F:	drivers/mmc/bcm2835_sdhost.c
 F:	drivers/serial/serial_bcm283x_mu.c
+F:	drivers/serial/serial_bcm283x_pl011.c
 F:	drivers/video/bcm2835.c
 F:	include/dm/platform_data/serial_bcm283x_mu.h
 F:	drivers/pinctrl/broadcom/
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 72281a7..3ffedba 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -395,6 +395,15 @@
 	help
 	  Select this to enable Mini-UART support on BCM283X family of SoCs.
 
+config BCM283X_PL011_SERIAL
+	bool "Support for BCM283x PL011 UART"
+	depends on PL01X_SERIAL && ARCH_BCM283X
+	default y
+	help
+	  Select this to enable an overriding PL011 driver for BCM283X SoCs
+	  that supports automatic disable, so that it only gets used when
+	  the UART is actually muxed.
+
 config BCM6345_SERIAL
 	bool "Support for BCM6345 UART"
 	depends on DM_SERIAL && ARCH_BMIPS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5ef603a..cac9a8b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -46,6 +46,7 @@
 obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o
 obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o
 obj-$(CONFIG_BCM283X_MU_SERIAL) += serial_bcm283x_mu.o
+obj-$(CONFIG_BCM283X_PL011_SERIAL) += serial_bcm283x_pl011.o
 obj-$(CONFIG_MSM_SERIAL) += serial_msm.o
 obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
 obj-$(CONFIG_MPC8XX_CONS) += serial_mpc8xx.o
diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c
new file mode 100644
index 0000000..bfd39f8
--- /dev/null
+++ b/drivers/serial/serial_bcm283x_pl011.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2018 Alexander Graf <agraf@suse.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <dm/pinctrl.h>
+#include <dm/platform_data/serial_pl01x.h>
+#include "serial_pl01x_internal.h"
+
+/*
+ * Check if this serial device is muxed
+ *
+ * The serial device will only work properly if it has been muxed to the serial
+ * pins by firmware. Check whether that happened here.
+ *
+ * @return true if serial device is muxed, false if not
+ */
+static bool bcm283x_is_serial_muxed(void)
+{
+	int serial_gpio = 15;
+	struct udevice *dev;
+
+	if (uclass_first_device(UCLASS_PINCTRL, &dev) || !dev)
+		return false;
+
+	if (pinctrl_get_gpio_mux(dev, 0, serial_gpio) != BCM2835_GPIO_ALT0)
+		return false;
+
+	return true;
+}
+
+static int bcm283x_pl011_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+	int ret;
+
+	/* Don't spawn the device if it's not muxed */
+	if (!bcm283x_is_serial_muxed())
+		return -ENODEV;
+
+	ret = pl01x_serial_ofdata_to_platdata(dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * TODO: Reinitialization doesn't always work for now, just skip
+	 *       init always - we know we're already initialized
+	 */
+	plat->skip_init = true;
+
+	return 0;
+}
+
+static const struct udevice_id bcm283x_pl011_serial_id[] = {
+	{.compatible = "brcm,bcm2835-pl011", .data = TYPE_PL011},
+	{}
+};
+
+U_BOOT_DRIVER(bcm283x_pl011_uart) = {
+	.name	= "bcm283x_pl011",
+	.id	= UCLASS_SERIAL,
+	.of_match = of_match_ptr(bcm283x_pl011_serial_id),
+	.ofdata_to_platdata = of_match_ptr(bcm283x_pl011_serial_ofdata_to_platdata),
+	.platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata),
+	.probe	= pl01x_serial_probe,
+	.ops	= &pl01x_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+	.priv_auto_alloc_size = sizeof(struct pl01x_priv),
+};
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 2cbc84c..23d9d83 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -273,11 +273,6 @@
 
 #ifdef CONFIG_DM_SERIAL
 
-struct pl01x_priv {
-	struct pl01x_regs *regs;
-	enum pl01x_type type;
-};
-
 static int pl01x_serial_setbrg(struct udevice *dev, int baudrate)
 {
 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
@@ -291,7 +286,7 @@
 	return 0;
 }
 
-static int pl01x_serial_probe(struct udevice *dev)
+int pl01x_serial_probe(struct udevice *dev)
 {
 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
 	struct pl01x_priv *priv = dev_get_priv(dev);
@@ -329,7 +324,7 @@
 		return fr & UART_PL01x_FR_TXFF ? 0 : 1;
 }
 
-static const struct dm_serial_ops pl01x_serial_ops = {
+const struct dm_serial_ops pl01x_serial_ops = {
 	.putc = pl01x_serial_putc,
 	.pending = pl01x_serial_pending,
 	.getc = pl01x_serial_getc,
@@ -343,7 +338,7 @@
 	{}
 };
 
-static int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
+int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
 	fdt_addr_t addr;
diff --git a/drivers/serial/serial_pl01x_internal.h b/drivers/serial/serial_pl01x_internal.h
index 288a4f1..c56dd54 100644
--- a/drivers/serial/serial_pl01x_internal.h
+++ b/drivers/serial/serial_pl01x_internal.h
@@ -38,7 +38,20 @@
 	u32	pl011_lcrh;	/* 0x2C Line control register */
 	u32	pl011_cr;	/* 0x30 Control register */
 };
-#endif
+
+#ifdef CONFIG_DM_SERIAL
+
+int pl01x_serial_ofdata_to_platdata(struct udevice *dev);
+int pl01x_serial_probe(struct udevice *dev);
+extern const struct dm_serial_ops pl01x_serial_ops;
+
+struct pl01x_priv {
+	struct pl01x_regs *regs;
+	enum pl01x_type type;
+};
+
+#endif /* CONFIG_DM_SERIAL */
+#endif /* !__ASSEMBLY__ */
 
 #define UART_PL01x_RSR_OE               0x08
 #define UART_PL01x_RSR_BE               0x04