commit a6eadd5375f6fdb320c5ee06ba8493281c5d15d0
author Peng Fan <van.freenix@gmail.com> Wed Jun 15 10:53:00 2016 +0800
committer York Sun <york.sun@nxp.com> Tue Jun 28 12:08:53 2016 -0700
tree 005e441c99059d6894d419cb91982ca29d031ca7
parent 33bb91b53c170c5b392f21671917f4176fbb805a

mmc: fsl: reset to normal boot mode when eMMC fast boot

When booting in eMMC fast boot, MMC host does not exit from
boot mode after bootrom loading image. So the first command
'CMD0' sent in uboot will pull down the CMD line to low and
cause errors.

This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.

Also clear DLL_CTRL delay line settings at USDHC initialization
to eliminate the pre-settings from boot rom.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

drivers/mmc/fsl_esdhc.c

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index b7b4f14..bfbef66 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -56,21 +56,27 @@
 	uint    fevt;		/* Force event register */
 	uint    admaes;		/* ADMA error status register */
 	uint    adsaddr;	/* ADMA system address register */
-	char    reserved2[100];	/* reserved */
-	uint    vendorspec;	/* Vendor Specific register */
-	char    reserved3[56];	/* reserved */
+	char    reserved2[4];
+	uint    dllctrl;
+	uint    dllstat;
+	uint    clktunectrlstatus;
+	char    reserved3[84];
+	uint    vendorspec;
+	uint    mmcboot;
+	uint    vendorspec2;
+	char	reserved4[48];
 	uint    hostver;	/* Host controller version register */
-	char    reserved4[4];	/* reserved */
-	uint    dmaerraddr;	/* DMA error address register */
 	char    reserved5[4];	/* reserved */
-	uint    dmaerrattr;	/* DMA error attribute register */
+	uint    dmaerraddr;	/* DMA error address register */
 	char    reserved6[4];	/* reserved */
+	uint    dmaerrattr;	/* DMA error attribute register */
+	char    reserved7[4];	/* reserved */
 	uint    hostcapblt2;	/* Host controller capabilities register 2 */
-	char    reserved7[8];	/* reserved */
+	char    reserved8[8];	/* reserved */
 	uint    tcr;		/* Tuning control register */
-	char    reserved8[28];	/* reserved */
+	char    reserved9[28];	/* reserved */
 	uint    sddirctl;	/* SD direction control register */
-	char    reserved9[712];	/* reserved */
+	char    reserved10[712];/* reserved */
 	uint    scr;		/* eSDHC control register */
 };
 
@@ -616,6 +622,20 @@
 	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
 		udelay(1000);
 
+#if defined(CONFIG_FSL_USDHC)
+	/* RSTA doesn't reset MMC_BOOT register, so manually reset it */
+	esdhc_write32(&regs->mmcboot, 0x0);
+	/* Reset MIX_CTRL and CLK_TUNE_CTRL_STATUS regs to 0 */
+	esdhc_write32(&regs->mixctrl, 0x0);
+	esdhc_write32(&regs->clktunectrlstatus, 0x0);
+
+	/* Put VEND_SPEC to default value */
+	esdhc_write32(&regs->vendorspec, VENDORSPEC_INIT);
+
+	/* Disable DLL_CTRL delay line */
+	esdhc_write32(&regs->dllctrl, 0x0);
+#endif
+
 #ifndef ARCH_MXC
 	/* Enable cache snooping */
 	esdhc_write32(&regs->scr, 0x00000040);