This is a BIOS emulator, porting from SciTech for u-boot, mainly for
ATI video card BIOS. and can be used for x86 code emulation by some
modifications.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile
new file mode 100644
index 0000000..ba7d436
--- /dev/null
+++ b/drivers/bios_emulator/Makefile
@@ -0,0 +1,30 @@
+include $(TOPDIR)/config.mk
+
+LIB := libatibiosemu.a
+
+X86DIR = ./x86emu
+
+OBJS = atibios.o biosemu.o besys.o bios.o \
+ $(X86DIR)/decode.o \
+ $(X86DIR)/ops2.o \
+ $(X86DIR)/ops.o \
+ $(X86DIR)/prim_ops.o \
+ $(X86DIR)/sys.o \
+ $(X86DIR)/debug.o
+
+CFLAGS += -I. -I./include -I$(X86DIR) -I$(TOPDIR)/include \
+ -D__PPC__ -D__BIG_ENDIAN__
+
+all: $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c
new file mode 100644
index 0000000..084339c
--- /dev/null
+++ b/drivers/bios_emulator/atibios.c
@@ -0,0 +1,340 @@
+/****************************************************************************
+*
+* Video BOOT Graphics Card POST Module
+*
+* ========================================================================
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc. All rights reserved.
+*
+* This file may be distributed and/or modified under the terms of the
+* GNU General Public License version 2.0 as published by the Free
+* Software Foundation and appearing in the file LICENSE.GPL included
+* in the packaging of this file.
+*
+* Licensees holding a valid Commercial License for this product from
+* SciTech Software, Inc. may use this file in accordance with the
+* Commercial License Agreement provided with the Software.
+*
+* This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING
+* THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+* PURPOSE.
+*
+* See http://www.scitechsoft.com/license/ for information about
+* the licensing options available and how to purchase a Commercial
+* License Agreement.
+*
+* Contact license@scitechsoft.com if any conditions of this licensing
+* are not clear to you, or you have questions about licensing options.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Linux Kernel
+* Developer: Kendall Bennett
+*
+* Description: Module to implement booting PCI/AGP controllers on the
+* bus. We use the x86 real mode emulator to run the BIOS on
+* graphics controllers to bring the cards up.
+*
+* Note that at present this module does *not* support
+* multiple controllers.
+*
+* The orignal name of this file is warmboot.c.
+* Jason ported this file to u-boot to run the ATI video card
+* BIOS in u-boot.
+****************************************************************************/
+#include <common.h>
+
+#ifdef CONFIG_BIOSEMU
+
+#include "biosemui.h"
+#include <malloc.h>
+
+/* Length of the BIOS image */
+#define MAX_BIOSLEN (128 * 1024L)
+
+/* Define some useful types and macros */
+#define true 1
+#define false 0
+
+/* Place to save PCI BAR's that we change and later restore */
+static u32 saveROMBaseAddress;
+static u32 saveBaseAddress10;
+static u32 saveBaseAddress14;
+static u32 saveBaseAddress18;
+static u32 saveBaseAddress20;
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus to boot
+VGAInfo - BIOS emulator VGA info structure
+
+REMARKS:
+This function executes the BIOS POST code on the controller. We assume that
+at this stage the controller has its I/O and memory space enabled and
+that all other controllers are in a disabled state.
+****************************************************************************/
+static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+{
+ RMREGS regs;
+ RMSREGS sregs;
+
+ /* Determine the value to store in AX for BIOS POST. Per the PCI specs,
+ AH must contain the bus and AL must contain the devfn, encoded as
+ (dev << 3) | fn
+ */
+ memset(®s, 0, sizeof(regs));
+ memset(&sregs, 0, sizeof(sregs));
+ regs.x.ax = ((int)PCI_BUS(pcidev) << 8) |
+ ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev);
+
+ /*Setup the X86 emulator for the VGA BIOS*/
+ BE_setVGA(VGAInfo);
+
+ /*Execute the BIOS POST code*/
+ BE_callRealMode(0xC000, 0x0003, ®s, &sregs);
+
+ /*Cleanup and exit*/
+ BE_getVGA(VGAInfo);
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus
+bar - Place to return the base address register offset to use
+
+RETURNS:
+The address to use to map the secondary BIOS (AGP devices)
+
+REMARKS:
+Searches all the PCI base address registers for the device looking for a
+memory mapping that is large enough to hold our ROM BIOS. We usually end up
+finding the framebuffer mapping (usually BAR 0x10), and we use this mapping
+to map the BIOS for the device into. We use a mapping that is already
+assigned to the device to ensure the memory range will be passed through
+by any PCI->PCI or AGP->PCI bridge that may be present.
+
+NOTE: Usually this function is only used for AGP devices, but it may be
+ used for PCI devices that have already been POST'ed and the BIOS
+ ROM base address has been zero'ed out.
+
+NOTE: This function leaves the original memory aperture disabled by leaving
+ it programmed to all 1's. It must be restored to the correct value
+ later.
+****************************************************************************/
+static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar)
+{
+ u32 base, size;
+
+ for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) {
+ pci_read_config_dword(pcidev, *bar, &base);
+ if (!(base & 0x1)) {
+ pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF);
+ pci_read_config_dword(pcidev, *bar, &size);
+ size = ~(size & ~0xFF) + 1;
+ if (size >= MAX_BIOSLEN)
+ return base & ~0xFF;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************
+REMARKS:
+Some non-x86 Linux kernels map PCI relocateable I/O to values that
+are above 64K, which will not work with the BIOS image that requires
+the offset for the I/O ports to be a maximum of 16-bits. Ideally
+someone should fix the kernel to map the I/O ports for VGA compatible
+devices to a different location (or just all I/O ports since it is
+unlikely you can have enough devices in the machine to use up all
+64K of the I/O space - a total of more than 256 cards would be
+necessary).
+
+Anyway to fix this we change all I/O mapped base registers and
+chop off the top bits.
+****************************************************************************/
+static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base)
+{
+ if ((*base & 0x1) && (*base > 0xFFFE)) {
+ *base &= 0xFFFF;
+ pci_write_config_dword(pcidev, reg, *base);
+
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus
+
+RETURNS:
+Pointers to the mapped BIOS image
+
+REMARKS:
+Maps a pointer to the BIOS image on the graphics card on the PCI bus.
+****************************************************************************/
+void *PCI_mapBIOSImage(pci_dev_t pcidev)
+{
+ u32 BIOSImagePhys;
+ int BIOSImageBAR;
+ u8 *BIOSImage;
+
+ /*Save PCI BAR registers that might get changed*/
+ pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
+ pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+
+ /*Fix up I/O base registers to less than 64K */
+ if(saveBaseAddress14 != 0)
+ PCI_fixupIObase(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
+ else
+ PCI_fixupIObase(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+
+ /* Some cards have problems that stop us from being able to read the
+ BIOS image from the ROM BAR. To fix this we have to do some chipset
+ specific programming for different cards to solve this problem.
+ */
+
+ if ((BIOSImagePhys = PCI_findBIOSAddr(pcidev, &BIOSImageBAR)) == 0) {
+ printf("Find bios addr error\n");
+ return NULL;
+ }
+
+ BIOSImage = (u8 *) BIOSImagePhys;
+
+ /*Change the PCI BAR registers to map it onto the bus.*/
+ pci_write_config_dword(pcidev, BIOSImageBAR, 0);
+ pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImagePhys | 0x1);
+
+ udelay(1);
+
+ /*Check that the BIOS image is valid. If not fail, or return the
+ compiled in BIOS image if that option was enabled
+ */
+ if (BIOSImage[0] != 0x55 || BIOSImage[1] != 0xAA || BIOSImage[2] == 0) {
+ return NULL;
+ }
+
+ return BIOSImage;
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus
+
+REMARKS:
+Unmaps the BIOS image for the device and restores framebuffer mappings
+****************************************************************************/
+void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage)
+{
+ pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
+ pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10);
+ pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14);
+ pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
+ pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus to boot
+VGAInfo - BIOS emulator VGA info structure
+
+RETURNS:
+True if successfully initialised, false if not.
+
+REMARKS:
+Loads and POST's the display controllers BIOS, directly from the BIOS
+image we can extract over the PCI bus.
+****************************************************************************/
+static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+{
+ u32 BIOSImageLen;
+ uchar *mappedBIOS;
+ uchar *copyOfBIOS;
+
+ /*Allocate memory to store copy of BIOS from display controller*/
+ if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) {
+ printf("videoboot: Video ROM failed to map!\n");
+ return false;
+ }
+
+ BIOSImageLen = mappedBIOS[2] * 512;
+
+ if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) {
+ printf("videoboot: Out of memory!\n");
+ return false;
+ }
+ memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen);
+
+ PCI_unmapBIOSImage(pcidev, mappedBIOS);
+
+ /*Save information in VGAInfo structure*/
+ VGAInfo->function = PCI_FUNC(pcidev);
+ VGAInfo->device = PCI_DEV(pcidev);
+ VGAInfo->bus = PCI_BUS(pcidev);
+ VGAInfo->pcidev = pcidev;
+ VGAInfo->BIOSImage = copyOfBIOS;
+ VGAInfo->BIOSImageLen = BIOSImageLen;
+
+ /*Now execute the BIOS POST for the device*/
+ if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) {
+ printf("videoboot: Video ROM image is invalid!\n");
+ return false;
+ }
+
+ PCI_doBIOSPOST(pcidev, VGAInfo);
+
+ /*Reset the size of the BIOS image to the final size*/
+ VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512;
+ return true;
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus to boot
+pVGAInfo - Place to return VGA info structure is requested
+cleanUp - True to clean up on exit, false to leave emulator active
+
+REMARKS:
+Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
+and the X86 BIOS emulator module.
+****************************************************************************/
+int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp)
+{
+ BE_VGAInfo *VGAInfo;
+
+ printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
+ PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
+
+ /*Initialise the x86 BIOS emulator*/
+ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
+ printf("videoboot: Out of memory!\n");
+ return false;
+ }
+ memset(VGAInfo, 0, sizeof(*VGAInfo));
+ BE_init(0, 65536, VGAInfo, 0);
+
+ /*Post all the display controller BIOS'es*/
+ PCI_postController(pcidev, VGAInfo);
+
+ /*Cleanup and exit the emulator if requested. If the BIOS emulator
+ is needed after booting the card, we will not call BE_exit and
+ leave it enabled for further use (ie: VESA driver etc).
+ */
+ if (cleanUp) {
+ BE_exit();
+ if (VGAInfo->BIOSImage)
+ free(VGAInfo->BIOSImage);
+ free(VGAInfo);
+ VGAInfo = NULL;
+ }
+ /*Return VGA info pointer if the caller requested it*/
+ if (pVGAInfo)
+ *pVGAInfo = VGAInfo;
+ return true;
+}
+
+#endif
diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c
new file mode 100644
index 0000000..894012f
--- /dev/null
+++ b/drivers/bios_emulator/besys.c
@@ -0,0 +1,722 @@
+/****************************************************************************
+*
+* BIOS emulator and interface
+* to Realmode X86 Emulator Library
+*
+* ========================================================================
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin<Jason.jin@freescale.com>
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc. All rights reserved.
+*
+* This file may be distributed and/or modified under the terms of the
+* GNU General Public License version 2.0 as published by the Free
+* Software Foundation and appearing in the file LICENSE.GPL included
+* in the packaging of this file.
+*
+* Licensees holding a valid Commercial License for this product from
+* SciTech Software, Inc. may use this file in accordance with the
+* Commercial License Agreement provided with the Software.
+*
+* This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING
+* THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+* PURPOSE.
+*
+* See http://www.scitechsoft.com/license/ for information about
+* the licensing options available and how to purchase a Commercial
+* License Agreement.
+*
+* Contact license@scitechsoft.com if any conditions of this licensing
+* are not clear to you, or you have questions about licensing options.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file includes BIOS emulator I/O and memory access
+* functions.
+*
+* Jason ported this file to u-boot to run the ATI video card
+* BIOS in u-boot. Removed some emulate functions such as the
+* timer port access. Made all the VGA port except reading 0x3c3
+* be emulated. Seems like reading 0x3c3 should return the high
+* 16 bit of the io port.
+*
+****************************************************************************/
+
+#include "biosemui.h"
+
+/*------------------------- Global Variables ------------------------------*/
+
+#ifndef __i386__
+static char *BE_biosDate = "08/14/99";
+static u8 BE_model = 0xFC;
+static u8 BE_submodel = 0x00;
+#endif
+
+/*----------------------------- Implementation ----------------------------*/
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to convert
+
+RETURNS:
+Actual memory address to read or write the data
+
+REMARKS:
+This function converts an emulator memory address in a 32-bit range to
+a real memory address that we wish to access. It handles splitting up the
+memory address space appropriately to access the emulator BIOS image, video
+memory and system BIOS etc.
+****************************************************************************/
+static u8 *BE_memaddr(u32 addr)
+{
+ if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
+ return (u8*)(_BE_env.biosmem_base + addr - 0xC0000);
+ } else if (addr > _BE_env.biosmem_limit && addr < 0xD0000) {
+ DB(printf("BE_memaddr: address %#lx may be invalid!\n", addr);)
+ return M.mem_base;
+ } else if (addr >= 0xA0000 && addr <= 0xBFFFF) {
+ return (u8*)(_BE_env.busmem_base + addr - 0xA0000);
+ }
+#ifdef __i386__
+ else if (addr >= 0xD0000 && addr <= 0xFFFFF) {
+ /* We map the real System BIOS directly on real PC's */
+ DB(printf("BE_memaddr: System BIOS address %#lx\n", addr);)
+ return _BE_env.busmem_base + addr - 0xA0000;
+ }
+#else
+ else if (addr >= 0xFFFF5 && addr < 0xFFFFE) {
+ /* Return a faked BIOS date string for non-x86 machines */
+ DB(printf("BE_memaddr - Returning BIOS date\n");)
+ return BE_biosDate + addr - 0xFFFF5;
+ } else if (addr == 0xFFFFE) {
+ /* Return system model identifier for non-x86 machines */
+ DB(printf("BE_memaddr - Returning model\n");)
+ return &BE_model;
+ } else if (addr == 0xFFFFF) {
+ /* Return system submodel identifier for non-x86 machines */
+ DB(printf("BE_memaddr - Returning submodel\n");)
+ return &BE_submodel;
+ }
+#endif
+ else if (addr > M.mem_size - 1) {
+ HALT_SYS();
+ return M.mem_base;
+ }
+
+ return M.mem_base + addr;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Byte value read from emulator memory.
+
+REMARKS:
+Reads a byte value from the emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+u8 X86API BE_rdb(u32 addr)
+{
+ if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)
+ return 0;
+ else {
+ u8 val = readb_le(BE_memaddr(addr));
+ return val;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Word value read from emulator memory.
+
+REMARKS:
+Reads a word value from the emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+u16 X86API BE_rdw(u32 addr)
+{
+ if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)
+ return 0;
+ else {
+ u8 *base = BE_memaddr(addr);
+ u16 val = readw_le(base);
+ return val;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Long value read from emulator memory.
+
+REMARKS:
+Reads a 32-bit value from the emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+u32 X86API BE_rdl(u32 addr)
+{
+ if (_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)
+ return 0;
+ else {
+ u8 *base = BE_memaddr(addr);
+ u32 val = readl_le(base);
+ return val;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a byte value to emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+void X86API BE_wrb(u32 addr, u8 val)
+{
+ if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) {
+ writeb_le(BE_memaddr(addr), val);
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a word value to emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+void X86API BE_wrw(u32 addr, u16 val)
+{
+ if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) {
+ u8 *base = BE_memaddr(addr);
+ writew_le(base, val);
+
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a 32-bit value to emulator memory. We have three distinct memory
+regions that are handled differently, which this function handles.
+****************************************************************************/
+void X86API BE_wrl(u32 addr, u32 val)
+{
+ if (!(_BE_env.emulateVGA && addr >= 0xA0000 && addr <= 0xBFFFF)) {
+ u8 *base = BE_memaddr(addr);
+ writel_le(base, val);
+ }
+}
+
+#if defined(DEBUG) || !defined(__i386__)
+
+/* For Non-Intel machines we may need to emulate some I/O port accesses that
+ * the BIOS may try to access, such as the PCI config registers.
+ */
+
+#define IS_TIMER_PORT(port) (0x40 <= port && port <= 0x43)
+#define IS_CMOS_PORT(port) (0x70 <= port && port <= 0x71)
+/*#define IS_VGA_PORT(port) (_BE_env.emulateVGA && 0x3C0 <= port && port <= 0x3DA)*/
+#define IS_VGA_PORT(port) (0x3C0 <= port && port <= 0x3DA)
+#define IS_PCI_PORT(port) (0xCF8 <= port && port <= 0xCFF)
+#define IS_SPKR_PORT(port) (port == 0x61)
+
+/****************************************************************************
+PARAMETERS:
+port - Port to read from
+type - Type of access to perform
+
+REMARKS:
+Performs an emulated read from the Standard VGA I/O ports. If the target
+hardware does not support mapping the VGA I/O and memory (such as some
+PowerPC systems), we emulate the VGA so that the BIOS will still be able to
+set NonVGA display modes such as on ATI hardware.
+****************************************************************************/
+static u8 VGA_inpb(
+ const int port)
+{
+ u8 val = 0xff;
+
+ switch (port) {
+ case 0x3C0:
+ /* 3C0 has funky characteristics because it can act as either
+ a data register or index register depending on the state
+ of an internal flip flop in the hardware. Hence we have
+ to emulate that functionality in here. */
+ if (_BE_env.flipFlop3C0 == 0) {
+ /* Access 3C0 as index register*/
+ val = _BE_env.emu3C0;
+ }
+ else {
+ /* Access 3C0 as data register*/
+ if (_BE_env.emu3C0 < ATT_C)
+ val = _BE_env.emu3C1[_BE_env.emu3C0];
+ }
+ _BE_env.flipFlop3C0 ^= 1;
+ break;
+ case 0x3C1:
+ if (_BE_env.emu3C0 < ATT_C)
+ return _BE_env.emu3C1[_BE_env.emu3C0];
+ break;
+ case 0x3CC:
+ return _BE_env.emu3C2;
+ case 0x3C4:
+ return _BE_env.emu3C4;
+ case 0x3C5:
+ if (_BE_env.emu3C4 < ATT_C)
+ return _BE_env.emu3C5[_BE_env.emu3C4];
+ break;
+ case 0x3C6:
+ return _BE_env.emu3C6;
+ case 0x3C7:
+ return _BE_env.emu3C7;
+ case 0x3C8:
+ return _BE_env.emu3C8;
+ case 0x3C9:
+ if (_BE_env.emu3C7 < PAL_C)
+ return _BE_env.emu3C9[_BE_env.emu3C7++];
+ break;
+ case 0x3CE:
+ return _BE_env.emu3CE;
+ case 0x3CF:
+ if (_BE_env.emu3CE < GRA_C)
+ return _BE_env.emu3CF[_BE_env.emu3CE];
+ break;
+ case 0x3D4:
+ if (_BE_env.emu3C2 & 0x1)
+ return _BE_env.emu3D4;
+ break;
+ case 0x3D5:
+ if ((_BE_env.emu3C2 & 0x1) && (_BE_env.emu3D4 < CRT_C))
+ return _BE_env.emu3D5[_BE_env.emu3D4];
+ break;
+ case 0x3DA:
+ _BE_env.flipFlop3C0 = 0;
+ val = _BE_env.emu3DA;
+ _BE_env.emu3DA ^= 0x9;
+ break;
+ }
+ return val;
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+type - Type of access to perform
+
+REMARKS:
+Performs an emulated write to one of the 8253 timer registers. For now
+we only emulate timer 0 which is the only timer that the BIOS code appears
+to use.
+****************************************************************************/
+static void VGA_outpb(
+ int port,
+ u8 val)
+{
+ switch (port) {
+ case 0x3C0:
+ /* 3C0 has funky characteristics because it can act as either
+ a data register or index register depending on the state
+ of an internal flip flop in the hardware. Hence we have
+ to emulate that functionality in here.*/
+ if (_BE_env.flipFlop3C0 == 0) {
+ /* Access 3C0 as index register*/
+ _BE_env.emu3C0 = val;
+ }
+ else {
+ /* Access 3C0 as data register*/
+ if (_BE_env.emu3C0 < ATT_C)
+ _BE_env.emu3C1[_BE_env.emu3C0] = val;
+ }
+ _BE_env.flipFlop3C0 ^= 1;
+ break;
+ case 0x3C2:
+ _BE_env.emu3C2 = val;
+ break;
+ case 0x3C4:
+ _BE_env.emu3C4 = val;
+ break;
+ case 0x3C5:
+ if (_BE_env.emu3C4 < ATT_C)
+ _BE_env.emu3C5[_BE_env.emu3C4] = val;
+ break;
+ case 0x3C6:
+ _BE_env.emu3C6 = val;
+ break;
+ case 0x3C7:
+ _BE_env.emu3C7 = (int)val * 3;
+ break;
+ case 0x3C8:
+ _BE_env.emu3C8 = (int)val * 3;
+ break;
+ case 0x3C9:
+ if (_BE_env.emu3C8 < PAL_C)
+ _BE_env.emu3C9[_BE_env.emu3C8++] = val;
+ break;
+ case 0x3CE:
+ _BE_env.emu3CE = val;
+ break;
+ case 0x3CF:
+ if (_BE_env.emu3CE < GRA_C)
+ _BE_env.emu3CF[_BE_env.emu3CE] = val;
+ break;
+ case 0x3D4:
+ if (_BE_env.emu3C2 & 0x1)
+ _BE_env.emu3D4 = val;
+ break;
+ case 0x3D5:
+ if ((_BE_env.emu3C2 & 0x1) && (_BE_env.emu3D4 < CRT_C))
+ _BE_env.emu3D5[_BE_env.emu3D4] = val;
+ break;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+regOffset - Offset into register space for non-DWORD accesses
+value - Value to write to register for PCI_WRITE_* operations
+func - Function to perform (PCIAccessRegFlags)
+
+RETURNS:
+Value read from configuration register for PCI_READ_* operations
+
+REMARKS:
+Accesses a PCI configuration space register by decoding the value currently
+stored in the _BE_env.configAddress variable and passing it through to the
+portable PCI_accessReg function.
+****************************************************************************/
+static u32 BE_accessReg(int regOffset, u32 value, int func)
+{
+#ifdef __KERNEL__
+ int function, device, bus;
+ u8 val8;
+ u16 val16;
+ u32 val32;
+
+
+ /* Decode the configuration register values for the register we wish to
+ * access
+ */
+ regOffset += (_BE_env.configAddress & 0xFF);
+ function = (_BE_env.configAddress >> 8) & 0x7;
+ device = (_BE_env.configAddress >> 11) & 0x1F;
+ bus = (_BE_env.configAddress >> 16) & 0xFF;
+
+ /* Ignore accesses to all devices other than the one we're POSTing */
+ if ((function == _BE_env.vgaInfo.function) &&
+ (device == _BE_env.vgaInfo.device) &&
+ (bus == _BE_env.vgaInfo.bus)) {
+ switch (func) {
+ case REG_READ_BYTE:
+ pci_read_config_byte(_BE_env.vgaInfo.pcidev, regOffset,
+ &val8);
+ return val8;
+ case REG_READ_WORD:
+ pci_read_config_word(_BE_env.vgaInfo.pcidev, regOffset,
+ &val16);
+ return val16;
+ case REG_READ_DWORD:
+ pci_read_config_dword(_BE_env.vgaInfo.pcidev, regOffset,
+ &val32);
+ return val32;
+ case REG_WRITE_BYTE:
+ pci_write_config_byte(_BE_env.vgaInfo.pcidev, regOffset,
+ value);
+
+ return 0;
+ case REG_WRITE_WORD:
+ pci_write_config_word(_BE_env.vgaInfo.pcidev, regOffset,
+ value);
+
+ return 0;
+ case REG_WRITE_DWORD:
+ pci_write_config_dword(_BE_env.vgaInfo.pcidev,
+ regOffset, value);
+
+ return 0;
+ }
+ }
+ return 0;
+#else
+ PCIDeviceInfo pciInfo;
+
+ pciInfo.mech1 = 1;
+ pciInfo.slot.i = 0;
+ pciInfo.slot.p.Function = (_BE_env.configAddress >> 8) & 0x7;
+ pciInfo.slot.p.Device = (_BE_env.configAddress >> 11) & 0x1F;
+ pciInfo.slot.p.Bus = (_BE_env.configAddress >> 16) & 0xFF;
+ pciInfo.slot.p.Enable = 1;
+
+ /* Ignore accesses to all devices other than the one we're POSTing */
+ if ((pciInfo.slot.p.Function ==
+ _BE_env.vgaInfo.pciInfo->slot.p.Function)
+ && (pciInfo.slot.p.Device == _BE_env.vgaInfo.pciInfo->slot.p.Device)
+ && (pciInfo.slot.p.Bus == _BE_env.vgaInfo.pciInfo->slot.p.Bus))
+ return PCI_accessReg((_BE_env.configAddress & 0xFF) + regOffset,
+ value, func, &pciInfo);
+ return 0;
+#endif
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to read from
+type - Type of access to perform
+
+REMARKS:
+Performs an emulated read from one of the PCI configuration space registers.
+We emulate this using our PCI_accessReg function which will access the PCI
+configuration space registers in a portable fashion.
+****************************************************************************/
+static u32 PCI_inp(int port, int type)
+{
+ switch (type) {
+ case REG_READ_BYTE:
+ if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port
+ && port <= 0xCFF)
+ return BE_accessReg(port - 0xCFC, 0, REG_READ_BYTE);
+ break;
+ case REG_READ_WORD:
+ if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port
+ && port <= 0xCFF)
+ return BE_accessReg(port - 0xCFC, 0, REG_READ_WORD);
+ break;
+ case REG_READ_DWORD:
+ if (port == 0xCF8)
+ return _BE_env.configAddress;
+ else if ((_BE_env.configAddress & 0x80000000) && port == 0xCFC)
+ return BE_accessReg(0, 0, REG_READ_DWORD);
+ break;
+ }
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+type - Type of access to perform
+
+REMARKS:
+Performs an emulated write to one of the PCI control registers.
+****************************************************************************/
+static void PCI_outp(int port, u32 val, int type)
+{
+ switch (type) {
+ case REG_WRITE_BYTE:
+ if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port
+ && port <= 0xCFF)
+ BE_accessReg(port - 0xCFC, val, REG_WRITE_BYTE);
+ break;
+ case REG_WRITE_WORD:
+ if ((_BE_env.configAddress & 0x80000000) && 0xCFC <= port
+ && port <= 0xCFF)
+ BE_accessReg(port - 0xCFC, val, REG_WRITE_WORD);
+ break;
+ case REG_WRITE_DWORD:
+ if (port == 0xCF8)
+ {
+ _BE_env.configAddress = val & 0x80FFFFFC;
+ }
+ else if ((_BE_env.configAddress & 0x80000000) && port == 0xCFC)
+ BE_accessReg(0, val, REG_WRITE_DWORD);
+ break;
+ }
+}
+
+#endif
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+
+RETURNS:
+Value read from the I/O port
+
+REMARKS:
+Performs an emulated 8-bit read from an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+u8 X86API BE_inb(X86EMU_pioAddr port)
+{
+ u8 val = 0;
+
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_VGA_PORT(port)){
+ /*seems reading port 0x3c3 return the high 16 bit of io port*/
+ if(port == 0x3c3)
+ val = LOG_inpb(port);
+ else
+ val = VGA_inpb(port);
+ }
+ else if (IS_TIMER_PORT(port))
+ DB(printf("Can not interept TIMER port now!\n");)
+ else if (IS_SPKR_PORT(port))
+ DB(printf("Can not interept SPEAKER port now!\n");)
+ else if (IS_CMOS_PORT(port))
+ DB(printf("Can not interept CMOS port now!\n");)
+ else if (IS_PCI_PORT(port))
+ val = PCI_inp(port, REG_READ_BYTE);
+ else if (port < 0x100) {
+ DB(printf("WARN: INVALID inb.%04X -> %02X\n", (u16) port, val);)
+ val = LOG_inpb(port);
+ } else
+#endif
+ val = LOG_inpb(port);
+ return val;
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+
+RETURNS:
+Value read from the I/O port
+
+REMARKS:
+Performs an emulated 16-bit read from an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+u16 X86API BE_inw(X86EMU_pioAddr port)
+{
+ u16 val = 0;
+
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_PCI_PORT(port))
+ val = PCI_inp(port, REG_READ_WORD);
+ else if (port < 0x100) {
+ DB(printf("WARN: Maybe INVALID inw.%04X -> %04X\n", (u16) port, val);)
+ val = LOG_inpw(port);
+ } else
+#endif
+ val = LOG_inpw(port);
+ return val;
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+
+RETURNS:
+Value read from the I/O port
+
+REMARKS:
+Performs an emulated 32-bit read from an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+u32 X86API BE_inl(X86EMU_pioAddr port)
+{
+ u32 val = 0;
+
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_PCI_PORT(port))
+ val = PCI_inp(port, REG_READ_DWORD);
+ else if (port < 0x100) {
+ val = LOG_inpd(port);
+ } else
+#endif
+ val = LOG_inpd(port);
+ return val;
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+val - Value to write to port
+
+REMARKS:
+Performs an emulated 8-bit write to an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+void X86API BE_outb(X86EMU_pioAddr port, u8 val)
+{
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_VGA_PORT(port))
+ VGA_outpb(port, val);
+ else if (IS_TIMER_PORT(port))
+ DB(printf("Can not interept TIMER port now!\n");)
+ else if (IS_SPKR_PORT(port))
+ DB(printf("Can not interept SPEAKER port now!\n");)
+ else if (IS_CMOS_PORT(port))
+ DB(printf("Can not interept CMOS port now!\n");)
+ else if (IS_PCI_PORT(port))
+ PCI_outp(port, val, REG_WRITE_BYTE);
+ else if (port < 0x100) {
+ DB(printf("WARN:Maybe INVALID outb.%04X <- %02X\n", (u16) port, val);)
+ LOG_outpb(port, val);
+ } else
+#endif
+ LOG_outpb(port, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+val - Value to write to port
+
+REMARKS:
+Performs an emulated 16-bit write to an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+void X86API BE_outw(X86EMU_pioAddr port, u16 val)
+{
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_VGA_PORT(port)) {
+ VGA_outpb(port, val);
+ VGA_outpb(port + 1, val >> 8);
+ } else if (IS_PCI_PORT(port))
+ PCI_outp(port, val, REG_WRITE_WORD);
+ else if (port < 0x100) {
+ DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16) port,
+ val);)
+ LOG_outpw(port, val);
+ } else
+#endif
+ LOG_outpw(port, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+port - Port to write to
+val - Value to write to port
+
+REMARKS:
+Performs an emulated 32-bit write to an I/O port. We handle special cases
+that we need to emulate in here, and fall through to reflecting the write
+through to the real hardware if we don't need to special case it.
+****************************************************************************/
+void X86API BE_outl(X86EMU_pioAddr port, u32 val)
+{
+#if defined(DEBUG) || !defined(__i386__)
+ if (IS_PCI_PORT(port))
+ PCI_outp(port, val, REG_WRITE_DWORD);
+ else if (port < 0x100) {
+ DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);)
+ LOG_outpd(port, val);
+ } else
+#endif
+ LOG_outpd(port, val);
+}
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
new file mode 100644
index 0000000..ed5437e
--- /dev/null
+++ b/drivers/bios_emulator/bios.c
@@ -0,0 +1,321 @@
+/****************************************************************************
+*
+* BIOS emulator and interface
+* to Realmode X86 Emulator Library
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1996-1999 SciTech Software, Inc.
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Module implementing the BIOS specific functions.
+*
+* Jason ported this file to u-boot to run the ATI video card
+* video BIOS.
+*
+****************************************************************************/
+
+#include "biosemui.h"
+
+/*----------------------------- Implementation ----------------------------*/
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number being serviced
+
+REMARKS:
+Handler for undefined interrupts.
+****************************************************************************/
+static void X86API undefined_intr(int intno)
+{
+ if (BE_rdw(intno * 4 + 2) == BIOS_SEG) {
+ DB(printf("biosEmu: undefined interrupt %xh called!\n", intno);)
+ } else
+ X86EMU_prepareForInt(intno);
+}
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number being serviced
+
+REMARKS:
+This function handles the default system BIOS Int 10h (the default is stored
+in the Int 42h vector by the system BIOS at bootup). We only need to handle
+a small number of special functions used by the BIOS during POST time.
+****************************************************************************/
+static void X86API int42(int intno)
+{
+ if (M.x86.R_AH == 0x12 && M.x86.R_BL == 0x32) {
+ if (M.x86.R_AL == 0) {
+ /* Enable CPU accesses to video memory */
+ PM_outpb(0x3c2, PM_inpb(0x3cc) | (u8) 0x02);
+ return;
+ } else if (M.x86.R_AL == 1) {
+ /* Disable CPU accesses to video memory */
+ PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8) ~ 0x02);
+ return;
+ }
+#ifdef DEBUG
+ else {
+ printf("int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n",
+ M.x86.R_AL);
+ }
+#endif
+ }
+#ifdef DEBUG
+ else {
+ printf("int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n",
+ M.x86.R_AH, M.x86.R_AL, M.x86.R_BL);
+ }
+#endif
+}
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number being serviced
+
+REMARKS:
+This function handles the default system BIOS Int 10h. If the POST code
+has not yet re-vectored the Int 10h BIOS interrupt vector, we handle this
+by simply calling the int42 interrupt handler above. Very early in the
+BIOS POST process, the vector gets replaced and we simply let the real
+mode interrupt handler process the interrupt.
+****************************************************************************/
+static void X86API int10(int intno)
+{
+ if (BE_rdw(intno * 4 + 2) == BIOS_SEG)
+ int42(intno);
+ else
+ X86EMU_prepareForInt(intno);
+}
+
+/* Result codes returned by the PCI BIOS */
+
+#define SUCCESSFUL 0x00
+#define FUNC_NOT_SUPPORT 0x81
+#define BAD_VENDOR_ID 0x83
+#define DEVICE_NOT_FOUND 0x86
+#define BAD_REGISTER_NUMBER 0x87
+#define SET_FAILED 0x88
+#define BUFFER_TOO_SMALL 0x89
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number being serviced
+
+REMARKS:
+This function handles the default Int 1Ah interrupt handler for the real
+mode code, which provides support for the PCI BIOS functions. Since we only
+want to allow the real mode BIOS code *only* see the PCI config space for
+its own device, we only return information for the specific PCI config
+space that we have passed in to the init function. This solves problems
+when using the BIOS to warm boot a secondary adapter when there is an
+identical adapter before it on the bus (some BIOS'es get confused in this
+case).
+****************************************************************************/
+static void X86API int1A(int unused)
+{
+ u16 pciSlot;
+
+#ifdef __KERNEL__
+ u8 interface, subclass, baseclass;
+
+ /* Initialise the PCI slot number */
+ pciSlot = ((int)_BE_env.vgaInfo.bus << 8) |
+ ((int)_BE_env.vgaInfo.device << 3) | (int)_BE_env.vgaInfo.function;
+#else
+/* Fail if no PCI device information has been registered */
+ if (!_BE_env.vgaInfo.pciInfo)
+ return;
+
+ pciSlot = (u16) (_BE_env.vgaInfo.pciInfo->slot.i >> 8);
+#endif
+ switch (M.x86.R_AX) {
+ case 0xB101: /* PCI bios present? */
+ M.x86.R_AL = 0x00; /* no config space/special cycle generation support */
+ M.x86.R_EDX = 0x20494350; /* " ICP" */
+ M.x86.R_BX = 0x0210; /* Version 2.10 */
+ M.x86.R_CL = 0; /* Max bus number in system */
+ CLEAR_FLAG(F_CF);
+ break;
+ case 0xB102: /* Find PCI device */
+ M.x86.R_AH = DEVICE_NOT_FOUND;
+#ifdef __KERNEL__
+ if (M.x86.R_DX == _BE_env.vgaInfo.VendorID &&
+ M.x86.R_CX == _BE_env.vgaInfo.DeviceID && M.x86.R_SI == 0) {
+#else
+ if (M.x86.R_DX == _BE_env.vgaInfo.pciInfo->VendorID &&
+ M.x86.R_CX == _BE_env.vgaInfo.pciInfo->DeviceID &&
+ M.x86.R_SI == 0) {
+#endif
+ M.x86.R_AH = SUCCESSFUL;
+ M.x86.R_BX = pciSlot;
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB103: /* Find PCI class code */
+ M.x86.R_AH = DEVICE_NOT_FOUND;
+#ifdef __KERNEL__
+ pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG,
+ &interface);
+ pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE,
+ &subclass);
+ pci_read_config_byte(_BE_env.vgaInfo.pcidev,
+ PCI_CLASS_DEVICE + 1, &baseclass);
+ if (M.x86.R_CL == interface && M.x86.R_CH == subclass
+ && (u8) (M.x86.R_ECX >> 16) == baseclass) {
+#else
+ if (M.x86.R_CL == _BE_env.vgaInfo.pciInfo->Interface &&
+ M.x86.R_CH == _BE_env.vgaInfo.pciInfo->SubClass &&
+ (u8) (M.x86.R_ECX >> 16) ==
+ _BE_env.vgaInfo.pciInfo->BaseClass) {
+#endif
+ M.x86.R_AH = SUCCESSFUL;
+ M.x86.R_BX = pciSlot;
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB108: /* Read configuration byte */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_read_config_byte(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
+ &M.x86.R_CL);
+#else
+ M.x86.R_CL =
+ (u8) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_BYTE,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB109: /* Read configuration word */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_read_config_word(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
+ &M.x86.R_CX);
+#else
+ M.x86.R_CX =
+ (u16) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_WORD,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB10A: /* Read configuration dword */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_read_config_dword(_BE_env.vgaInfo.pcidev,
+ M.x86.R_DI, &M.x86.R_ECX);
+#else
+ M.x86.R_ECX =
+ (u32) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_DWORD,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB10B: /* Write configuration byte */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_write_config_byte(_BE_env.vgaInfo.pcidev,
+ M.x86.R_DI, M.x86.R_CL);
+#else
+ PCI_accessReg(M.x86.R_DI, M.x86.R_CL, PCI_WRITE_BYTE,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB10C: /* Write configuration word */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_write_config_word(_BE_env.vgaInfo.pcidev,
+ M.x86.R_DI, M.x86.R_CX);
+#else
+ PCI_accessReg(M.x86.R_DI, M.x86.R_CX, PCI_WRITE_WORD,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ case 0xB10D: /* Write configuration dword */
+ M.x86.R_AH = BAD_REGISTER_NUMBER;
+ if (M.x86.R_BX == pciSlot) {
+ M.x86.R_AH = SUCCESSFUL;
+#ifdef __KERNEL__
+ pci_write_config_dword(_BE_env.vgaInfo.pcidev,
+ M.x86.R_DI, M.x86.R_ECX);
+#else
+ PCI_accessReg(M.x86.R_DI, M.x86.R_ECX, PCI_WRITE_DWORD,
+ _BE_env.vgaInfo.pciInfo);
+#endif
+ }
+ CONDITIONAL_SET_FLAG((M.x86.R_AH != SUCCESSFUL), F_CF);
+ break;
+ default:
+ printf("biosEmu/bios.int1a: unknown function AX=%#04x\n",
+ M.x86.R_AX);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+This function initialises the BIOS emulation functions for the specific
+PCI display device. We insulate the real mode BIOS from any other devices
+on the bus, so that it will work correctly thinking that it is the only
+device present on the bus (ie: avoiding any adapters present in from of
+the device we are trying to control).
+****************************************************************************/
+#define BE_constLE_32(v) ((((((v)&0xff00)>>8)|(((v)&0xff)<<8))<<16)|(((((v)&0xff000000)>>8)|(((v)&0x00ff0000)<<8))>>16))
+
+void _BE_bios_init(u32 * intrTab)
+{
+ int i;
+ X86EMU_intrFuncs bios_intr_tab[256];
+
+ for (i = 0; i < 256; ++i) {
+ intrTab[i] = BE_constLE_32(BIOS_SEG << 16);
+ bios_intr_tab[i] = undefined_intr;
+ }
+ bios_intr_tab[0x10] = int10;
+ bios_intr_tab[0x1A] = int1A;
+ bios_intr_tab[0x42] = int42;
+ bios_intr_tab[0x6D] = int10;
+ X86EMU_setupIntrFuncs(bios_intr_tab);
+}
diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c
new file mode 100644
index 0000000..aca594c
--- /dev/null
+++ b/drivers/bios_emulator/biosemu.c
@@ -0,0 +1,370 @@
+/****************************************************************************
+*
+* BIOS emulator and interface
+* to Realmode X86 Emulator Library
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1996-1999 SciTech Software, Inc.
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Module implementing the system specific functions. This
+* module is always compiled and linked in the OS depedent
+* libraries, and never in a binary portable driver.
+*
+* Jason ported this file to u-boot to run the ATI video card BIOS
+* in u-boot. Made all the video memory be emulated during the
+* BIOS runing process which may affect the VGA function but the
+* frambuffer function can work after run the BIOS.
+*
+****************************************************************************/
+
+#include "biosemui.h"
+#include <malloc.h>
+
+BE_sysEnv _BE_env = {{0}};
+static X86EMU_memFuncs _BE_mem __attribute__((section(".got2"))) = {
+ BE_rdb,
+ BE_rdw,
+ BE_rdl,
+ BE_wrb,
+ BE_wrw,
+ BE_wrl,
+ };
+
+static X86EMU_pioFuncs _BE_pio __attribute__((section(".got2"))) = {
+ BE_inb,
+ BE_inw,
+ BE_inl,
+ BE_outb,
+ BE_outw,
+ BE_outl,
+ };
+
+#define OFF(addr) (u16)(((addr) >> 0) & 0xffff)
+#define SEG(addr) (u16)(((addr) >> 4) & 0xf000)
+
+/****************************************************************************
+PARAMETERS:
+debugFlags - Flags to enable debugging options (debug builds only)
+memSize - Amount of memory to allocate for real mode machine
+info - Pointer to default VGA device information
+
+REMARKS:
+This functions initialises the BElib, and uses the passed in
+BIOS image as the BIOS that is used and emulated at 0xC0000.
+****************************************************************************/
+int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared)
+{
+#if !defined(__DRIVER__) && !defined(__KERNEL__)
+
+ PM_init();
+#endif
+ memset(&M, 0, sizeof(M));
+ if (memSize < 20480){
+ printf("Emulator requires at least 20Kb of memory!\n");
+ return 0;
+ }
+
+ M.mem_base = (unsigned long)malloc(memSize);
+
+ if (M.mem_base == NULL){
+ printf("Biosemu:Out of memory!");
+ return 0;
+ }
+ M.mem_size = memSize;
+
+ _BE_env.emulateVGA = 0;
+ _BE_env.busmem_base = (unsigned long)malloc(128 * 1024);
+ if (_BE_env.busmem_base == NULL){
+ printf("Biosemu:Out of memory!");
+ return 0;
+ }
+ M.x86.debug = debugFlags;
+ _BE_bios_init((u32*)info->LowMem);
+ X86EMU_setupMemFuncs(&_BE_mem);
+ X86EMU_setupPioFuncs(&_BE_pio);
+ BE_setVGA(info);
+ return 1;
+}
+
+/****************************************************************************
+PARAMETERS:
+info - Pointer to VGA device information to make current
+
+REMARKS:
+This function sets the VGA BIOS functions in the emulator to point to the
+specific VGA BIOS in use. This includes swapping the BIOS interrupt
+vectors, BIOS image and BIOS data area to the new BIOS. This allows the
+real mode BIOS to be swapped without resetting the entire emulator.
+****************************************************************************/
+void X86API BE_setVGA(BE_VGAInfo * info)
+{
+
+#ifdef __KERNEL__
+ _BE_env.vgaInfo.function = info->function;
+ _BE_env.vgaInfo.device = info->device;
+ _BE_env.vgaInfo.bus = info->bus;
+ _BE_env.vgaInfo.pcidev = info->pcidev;
+#else
+ _BE_env.vgaInfo.pciInfo = info->pciInfo;
+#endif
+ _BE_env.vgaInfo.BIOSImage = info->BIOSImage;
+ if (info->BIOSImage) {
+ _BE_env.biosmem_base = (ulong) info->BIOSImage;
+ _BE_env.biosmem_limit = 0xC0000 + info->BIOSImageLen - 1;
+ } else {
+ _BE_env.biosmem_base = _BE_env.busmem_base + 0x20000;
+ _BE_env.biosmem_limit = 0xC7FFF;
+ }
+ if (*((u32 *) info->LowMem) == 0)
+ _BE_bios_init((u32 *) info->LowMem);
+ memcpy((u8 *) M.mem_base, info->LowMem, sizeof(info->LowMem));
+}
+
+/****************************************************************************
+PARAMETERS:
+info - Pointer to VGA device information to retrieve current
+
+REMARKS:
+This function returns the VGA BIOS functions currently active in the
+emulator, so they can be restored at a later date.
+****************************************************************************/
+void X86API BE_getVGA(BE_VGAInfo * info)
+{
+#ifdef __KERNEL__
+ info->function = _BE_env.vgaInfo.function;
+ info->device = _BE_env.vgaInfo.device;
+ info->bus = _BE_env.vgaInfo.bus;
+ info->pcidev = _BE_env.vgaInfo.pcidev;
+#else
+ info->pciInfo = _BE_env.vgaInfo.pciInfo;
+#endif
+ info->BIOSImage = _BE_env.vgaInfo.BIOSImage;
+ memcpy(info->LowMem, (u8 *) M.mem_base, sizeof(info->LowMem));
+}
+
+/****************************************************************************
+PARAMETERS:
+r_seg - Segment for pointer to convert
+r_off - Offset for pointer to convert
+
+REMARKS:
+This function maps a real mode pointer in the emulator memory to a protected
+mode pointer that can be used to directly access the memory.
+
+NOTE: The memory is *always* in little endian format, son on non-x86
+ systems you will need to do endian translations to access this
+ memory.
+****************************************************************************/
+void *X86API BE_mapRealPointer(uint r_seg, uint r_off)
+{
+ u32 addr = ((u32) r_seg << 4) + r_off;
+
+ if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) {
+ return (void *)(_BE_env.biosmem_base + addr - 0xC0000);
+ } else if (addr >= 0xA0000 && addr <= 0xFFFFF) {
+ return (void *)(_BE_env.busmem_base + addr - 0xA0000);
+ }
+ return (void *)(M.mem_base + addr);
+}
+
+/****************************************************************************
+PARAMETERS:
+len - Return the length of the VESA buffer
+rseg - Place to store VESA buffer segment
+roff - Place to store VESA buffer offset
+
+REMARKS:
+This function returns the address of the VESA transfer buffer in real
+_BE_piomode emulator memory. The VESA transfer buffer is always 1024 bytes long,
+and located at 15Kb into the start of the real mode memory (16Kb is where
+we put the real mode code we execute for issuing interrupts).
+
+NOTE: The memory is *always* in little endian format, son on non-x86
+ systems you will need to do endian translations to access this
+ memory.
+****************************************************************************/
+void *X86API BE_getVESABuf(uint * len, uint * rseg, uint * roff)
+{
+ *len = 1024;
+ *rseg = SEG(0x03C00);
+ *roff = OFF(0x03C00);
+ return (void *)(M.mem_base + ((u32) * rseg << 4) + *roff);
+}
+
+/****************************************************************************
+REMARKS:
+Cleans up and exits the emulator.
+****************************************************************************/
+void X86API BE_exit(void)
+{
+ free(M.mem_base);
+ free(_BE_env.busmem_base);
+}
+
+/****************************************************************************
+PARAMETERS:
+seg - Segment of code to call
+off - Offset of code to call
+regs - Real mode registers to load
+sregs - Real mode segment registers to load
+
+REMARKS:
+This functions calls a real mode far function at the specified address,
+and loads all the x86 registers from the passed in registers structure.
+On exit the registers returned from the call are returned in the same
+structures.
+****************************************************************************/
+void X86API BE_callRealMode(uint seg, uint off, RMREGS * regs, RMSREGS * sregs)
+{
+ M.x86.R_EAX = regs->e.eax;
+ M.x86.R_EBX = regs->e.ebx;
+ M.x86.R_ECX = regs->e.ecx;
+ M.x86.R_EDX = regs->e.edx;
+ M.x86.R_ESI = regs->e.esi;
+ M.x86.R_EDI = regs->e.edi;
+ M.x86.R_DS = sregs->ds;
+ M.x86.R_ES = sregs->es;
+ M.x86.R_FS = sregs->fs;
+ M.x86.R_GS = sregs->gs;
+
+ ((u8 *) M.mem_base)[0x4000] = 0x9A;
+ ((u8 *) M.mem_base)[0x4001] = (u8) off;
+ ((u8 *) M.mem_base)[0x4002] = (u8) (off >> 8);
+ ((u8 *) M.mem_base)[0x4003] = (u8) seg;
+ ((u8 *) M.mem_base)[0x4004] = (u8) (seg >> 8);
+ ((u8 *) M.mem_base)[0x4005] = 0xF1; /* Illegal op-code */
+ M.x86.R_CS = SEG(0x04000);
+ M.x86.R_IP = OFF(0x04000);
+
+ M.x86.R_SS = SEG(M.mem_size - 2);
+ M.x86.R_SP = OFF(M.mem_size - 2) + 2;
+
+ X86EMU_exec();
+
+ regs->e.cflag = M.x86.R_EFLG & F_CF;
+ regs->e.eax = M.x86.R_EAX;
+ regs->e.ebx = M.x86.R_EBX;
+ regs->e.ecx = M.x86.R_ECX;
+ regs->e.edx = M.x86.R_EDX;
+ regs->e.esi = M.x86.R_ESI;
+ regs->e.edi = M.x86.R_EDI;
+ sregs->ds = M.x86.R_DS;
+ sregs->es = M.x86.R_ES;
+ sregs->fs = M.x86.R_FS;
+ sregs->gs = M.x86.R_GS;
+}
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number to execute
+in - Real mode registers to load
+out - Place to store resulting real mode registers
+
+REMARKS:
+This functions calls a real mode interrupt function at the specified address,
+and loads all the x86 registers from the passed in registers structure.
+On exit the registers returned from the call are returned in out stucture.
+****************************************************************************/
+int X86API BE_int86(int intno, RMREGS * in, RMREGS * out)
+{
+ M.x86.R_EAX = in->e.eax;
+ M.x86.R_EBX = in->e.ebx;
+ M.x86.R_ECX = in->e.ecx;
+ M.x86.R_EDX = in->e.edx;
+ M.x86.R_ESI = in->e.esi;
+ M.x86.R_EDI = in->e.edi;
+ ((u8 *) M.mem_base)[0x4000] = 0xCD;
+ ((u8 *) M.mem_base)[0x4001] = (u8) intno;
+ ((u8 *) M.mem_base)[0x4002] = 0xF1;
+ M.x86.R_CS = SEG(0x04000);
+ M.x86.R_IP = OFF(0x04000);
+
+ M.x86.R_SS = SEG(M.mem_size - 1);
+ M.x86.R_SP = OFF(M.mem_size - 1) - 1;
+
+ X86EMU_exec();
+ out->e.cflag = M.x86.R_EFLG & F_CF;
+ out->e.eax = M.x86.R_EAX;
+ out->e.ebx = M.x86.R_EBX;
+ out->e.ecx = M.x86.R_ECX;
+ out->e.edx = M.x86.R_EDX;
+ out->e.esi = M.x86.R_ESI;
+ out->e.edi = M.x86.R_EDI;
+ return out->x.ax;
+}
+
+/****************************************************************************
+PARAMETERS:
+intno - Interrupt number to execute
+in - Real mode registers to load
+out - Place to store resulting real mode registers
+sregs - Real mode segment registers to load
+
+REMARKS:
+This functions calls a real mode interrupt function at the specified address,
+and loads all the x86 registers from the passed in registers structure.
+On exit the registers returned from the call are returned in out stucture.
+****************************************************************************/
+int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out, RMSREGS * sregs)
+{
+ M.x86.R_EAX = in->e.eax;
+ M.x86.R_EBX = in->e.ebx;
+ M.x86.R_ECX = in->e.ecx;
+ M.x86.R_EDX = in->e.edx;
+ M.x86.R_ESI = in->e.esi;
+ M.x86.R_EDI = in->e.edi;
+ M.x86.R_DS = sregs->ds;
+ M.x86.R_ES = sregs->es;
+ M.x86.R_FS = sregs->fs;
+ M.x86.R_GS = sregs->gs;
+ ((u8 *) M.mem_base)[0x4000] = 0xCD;
+ ((u8 *) M.mem_base)[0x4001] = (u8) intno;
+ ((u8 *) M.mem_base)[0x4002] = 0xF1;
+ M.x86.R_CS = SEG(0x04000);
+ M.x86.R_IP = OFF(0x04000);
+
+ M.x86.R_SS = SEG(M.mem_size - 1);
+ M.x86.R_SP = OFF(M.mem_size - 1) - 1;
+
+ X86EMU_exec();
+ out->e.cflag = M.x86.R_EFLG & F_CF;
+ out->e.eax = M.x86.R_EAX;
+ out->e.ebx = M.x86.R_EBX;
+ out->e.ecx = M.x86.R_ECX;
+ out->e.edx = M.x86.R_EDX;
+ out->e.esi = M.x86.R_ESI;
+ out->e.edi = M.x86.R_EDI;
+ sregs->ds = M.x86.R_DS;
+ sregs->es = M.x86.R_ES;
+ sregs->fs = M.x86.R_FS;
+ sregs->gs = M.x86.R_GS;
+ return out->x.ax;
+}
diff --git a/drivers/bios_emulator/biosemui.h b/drivers/bios_emulator/biosemui.h
new file mode 100644
index 0000000..3265ac1
--- /dev/null
+++ b/drivers/bios_emulator/biosemui.h
@@ -0,0 +1,169 @@
+/****************************************************************************
+*
+* BIOS emulator and interface
+* to Realmode X86 Emulator Library
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1996-1999 SciTech Software, Inc.
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Internal header file for the BIOS emulator library.
+*
+* Jason ported this file to u-boot, Added some architecture
+* related Macro.
+*
+****************************************************************************/
+
+#ifndef __BIOSEMUI_H
+#define __BIOSEMUI_H
+
+#include "biosemu.h"
+#include <asm/io.h>
+/*---------------------- Macros and type definitions ----------------------*/
+
+#ifdef DEBUG
+#define DB(x) x
+#else
+#define DB(x) do{}while(0);
+#endif
+
+#define BIOS_SEG 0xfff0
+extern X86EMU_sysEnv _X86EMU_env;
+#define M _X86EMU_env
+
+/* Macros to read and write values to x86 emulator memory. Memory is always
+ * considered to be little endian, so we use macros to do endian swapping
+ * where necessary.
+ */
+
+#ifdef __BIG_ENDIAN__
+#define readb_le(base) *((u8*)(base))
+#define readw_le(base) ((u16)readb_le(base) | ((u16)readb_le((base) + 1) << 8))
+#define readl_le(base) ((u32)readb_le((base) + 0) | ((u32)readb_le((base) + 1) << 8) | \
+ ((u32)readb_le((base) + 2) << 16) | ((u32)readb_le((base) + 3) << 24))
+#define writeb_le(base, v) *((u8*)(base)) = (v)
+#define writew_le(base, v) writeb_le(base + 0, (v >> 0) & 0xff), \
+ writeb_le(base + 1, (v >> 8) & 0xff)
+#define writel_le(base, v) writeb_le(base + 0, (v >> 0) & 0xff), \
+ writeb_le(base + 1, (v >> 8) & 0xff), \
+ writeb_le(base + 2, (v >> 16) & 0xff), \
+ writeb_le(base + 3, (v >> 24) & 0xff)
+#else
+#define readb_le(base) *((u8*)(base))
+#define readw_le(base) *((u16*)(base))
+#define readl_le(base) *((u32*)(base))
+#define writeb_le(base, v) *((u8*)(base)) = (v)
+#define writew_le(base, v) *((u16*)(base)) = (v)
+#define writel_le(base, v) *((u32*)(base)) = (v)
+#endif
+
+/****************************************************************************
+REMARKS:
+Function codes passed to the emulated I/O port functions to determine the
+type of operation to perform.
+****************************************************************************/
+typedef enum {
+ REG_READ_BYTE = 0,
+ REG_READ_WORD = 1,
+ REG_READ_DWORD = 2,
+ REG_WRITE_BYTE = 3,
+ REG_WRITE_WORD = 4,
+ REG_WRITE_DWORD = 5
+} RegisterFlags;
+
+/****************************************************************************
+REMARKS:
+Function codes passed to the emulated I/O port functions to determine the
+type of operation to perform.
+****************************************************************************/
+typedef enum {
+ PORT_BYTE = 1,
+ PORT_WORD = 2,
+ PORT_DWORD = 3,
+} PortInfoFlags;
+
+/****************************************************************************
+REMARKS:
+Data structure used to describe the details for the BIOS emulator system
+environment as used by the X86 emulator library.
+
+HEADER:
+biosemu.h
+
+MEMBERS:
+type - Type of port access (1 = byte, 2 = word, 3 = dword)
+defVal - Default power on value
+finalVal - Final value
+****************************************************************************/
+typedef struct {
+ u8 type;
+ u32 defVal;
+ u32 finalVal;
+} BE_portInfo;
+
+#define PM_inpb(port) inb(port+VIDEO_IO_OFFSET)
+#define PM_inpw(port) inw(port+VIDEO_IO_OFFSET)
+#define PM_inpd(port) inl(port+VIDEO_IO_OFFSET)
+#define PM_outpb(port,val) outb(val,port+VIDEO_IO_OFFSET)
+#define PM_outpw(port,val) outw(val,port+VIDEO_IO_OFFSET)
+#define PM_outpd(port,val) outl(val,port+VIDEO_IO_OFFSET)
+
+#define LOG_inpb(port) PM_inpb(port)
+#define LOG_inpw(port) PM_inpw(port)
+#define LOG_inpd(port) PM_inpd(port)
+#define LOG_outpb(port,val) PM_outpb(port,val)
+#define LOG_outpw(port,val) PM_outpw(port,val)
+#define LOG_outpd(port,val) PM_outpd(port,val)
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+/* bios.c */
+
+void _BE_bios_init(u32 * intrTab);
+void _BE_setup_funcs(void);
+
+/* besys.c */
+#define DEBUG_IO() (M.x86.debug & DEBUG_IO_TRACE_F)
+
+u8 X86API BE_rdb(u32 addr);
+u16 X86API BE_rdw(u32 addr);
+u32 X86API BE_rdl(u32 addr);
+void X86API BE_wrb(u32 addr, u8 val);
+void X86API BE_wrw(u32 addr, u16 val);
+void X86API BE_wrl(u32 addr, u32 val);
+
+u8 X86API BE_inb(X86EMU_pioAddr port);
+u16 X86API BE_inw(X86EMU_pioAddr port);
+u32 X86API BE_inl(X86EMU_pioAddr port);
+void X86API BE_outb(X86EMU_pioAddr port, u8 val);
+void X86API BE_outw(X86EMU_pioAddr port, u16 val);
+void X86API BE_outl(X86EMU_pioAddr port, u32 val);
+#endif
+/* __BIOSEMUI_H */
diff --git a/drivers/bios_emulator/include/biosemu.h b/drivers/bios_emulator/include/biosemu.h
new file mode 100644
index 0000000..13cb317
--- /dev/null
+++ b/drivers/bios_emulator/include/biosemu.h
@@ -0,0 +1,392 @@
+/****************************************************************************
+*
+* BIOS emulator and interface
+* to Realmode X86 Emulator Library
+*
+* Copyright (C) 1996-1999 SciTech Software, Inc.
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for the real mode x86 BIOS emulator, which is
+* used to warmboot any number of VGA compatible PCI/AGP
+* controllers under any OS, on any processor family that
+* supports PCI. We also allow the user application to call
+* real mode BIOS functions and Int 10h functions (including
+* the VESA BIOS).
+*
+****************************************************************************/
+
+#ifndef __BIOSEMU_H
+#define __BIOSEMU_H
+
+#ifdef __KERNEL__
+#include "x86emu.h"
+#else
+#include "x86emu.h"
+#include "pmapi.h"
+#include "pcilib.h"
+#endif
+
+/*---------------------- Macros and type definitions ----------------------*/
+
+#pragma pack(1)
+
+#ifndef __KERNEL__
+/****************************************************************************
+REMARKS:
+Data structure used to describe the details specific to a particular VGA
+controller. This information is used to allow the VGA controller to be
+swapped on the fly within the BIOS emulator.
+
+HEADER:
+biosemu.h
+
+MEMBERS:
+pciInfo - PCI device information block for the controller
+BIOSImage - Pointer to a read/write copy of the BIOS image
+BIOSImageLen - Length of the BIOS image
+LowMem - Copy of key low memory areas
+****************************************************************************/
+typedef struct {
+ PCIDeviceInfo *pciInfo;
+ void *BIOSImage;
+ ulong BIOSImageLen;
+ uchar LowMem[1536];
+} BE_VGAInfo;
+#else
+/****************************************************************************
+REMARKS:
+Data structure used to describe the details for the BIOS emulator system
+environment as used by the X86 emulator library.
+
+HEADER:
+biosemu.h
+
+MEMBERS:
+vgaInfo - VGA BIOS information structure
+biosmem_base - Base of the BIOS image
+biosmem_limit - Limit of the BIOS image
+busmem_base - Base of the VGA bus memory
+****************************************************************************/
+typedef struct {
+ int function;
+ int device;
+ int bus;
+ u32 VendorID;
+ u32 DeviceID;
+ pci_dev_t pcidev;
+ void *BIOSImage;
+ u32 BIOSImageLen;
+ u8 LowMem[1536];
+} BE_VGAInfo;
+
+#endif /* __KERNEL__ */
+
+#define CRT_C 24 /* 24 CRT Controller Registers */
+#define ATT_C 21 /* 21 Attribute Controller Registers */
+#define GRA_C 9 /* 9 Graphics Controller Registers */
+#define SEQ_C 5 /* 5 Sequencer Registers */
+#define PAL_C 768 /* 768 Palette Registers */
+
+/****************************************************************************
+REMARKS:
+Data structure used to describe the details for the BIOS emulator system
+environment as used by the X86 emulator library.
+
+HEADER:
+biosemu.h
+
+MEMBERS:
+vgaInfo - VGA BIOS information structure
+biosmem_base - Base of the BIOS image
+biosmem_limit - Limit of the BIOS image
+busmem_base - Base of the VGA bus memory
+timer - Timer used to emulate PC timer ports
+timer0 - Latched value for timer 0
+timer0Latched - True if timer 0 value was just latched
+timer2 - Current value for timer 2
+emulateVGA - True to emulate VGA I/O and memory accesses
+****************************************************************************/
+
+typedef struct {
+ BE_VGAInfo vgaInfo;
+ ulong biosmem_base;
+ ulong biosmem_limit;
+ ulong busmem_base;
+
+ u32 timer0;
+ int timer0Latched;
+ u32 timer1;
+ int timer1Latched;
+ u32 timer2;
+ int timer2Latched;
+
+ int emulateVGA;
+ u8 emu61;
+ u8 emu70;
+ int flipFlop3C0;
+ u32 configAddress;
+ u8 emu3C0;
+ u8 emu3C1[ATT_C];
+ u8 emu3C2;
+ u8 emu3C4;
+ u8 emu3C5[SEQ_C];
+ u8 emu3C6;
+ uint emu3C7;
+ uint emu3C8;
+ u8 emu3C9[PAL_C];
+ u8 emu3CE;
+ u8 emu3CF[GRA_C];
+ u8 emu3D4;
+ u8 emu3D5[CRT_C];
+ u8 emu3DA;
+
+} BE_sysEnv;
+
+#ifdef __KERNEL__
+
+/* Define some types when compiling for the Linux kernel that normally
+ * come from the SciTech PM library.
+ */
+
+/****************************************************************************
+REMARKS:
+Structure describing the 32-bit extended x86 CPU registers
+
+HEADER:
+pmapi.h
+
+MEMBERS:
+eax - Value of the EAX register
+ebx - Value of the EBX register
+ecx - Value of the ECX register
+edx - Value of the EDX register
+esi - Value of the ESI register
+edi - Value of the EDI register
+cflag - Value of the carry flag
+****************************************************************************/
+typedef struct {
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 esi;
+ u32 edi;
+ u32 cflag;
+} RMDWORDREGS;
+
+/****************************************************************************
+REMARKS:
+Structure describing the 16-bit x86 CPU registers
+
+HEADER:
+pmapi.h
+
+MEMBERS:
+ax - Value of the AX register
+bx - Value of the BX register
+cx - Value of the CX register
+dx - Value of the DX register
+si - Value of the SI register
+di - Value of the DI register
+cflag - Value of the carry flag
+****************************************************************************/
+#ifdef __BIG_ENDIAN__
+typedef struct {
+ u16 ax_hi, ax;
+ u16 bx_hi, bx;
+ u16 cx_hi, cx;
+ u16 dx_hi, dx;
+ u16 si_hi, si;
+ u16 di_hi, di;
+ u16 cflag_hi, cflag;
+} RMWORDREGS;
+#else
+typedef struct {
+ u16 ax, ax_hi;
+ u16 bx, bx_hi;
+ u16 cx, cx_hi;
+ u16 dx, dx_hi;
+ u16 si, si_hi;
+ u16 di, di_hi;
+ u16 cflag, cflag_hi;
+} RMWORDREGS;
+#endif
+
+/****************************************************************************
+REMARKS:
+Structure describing the 8-bit x86 CPU registers
+
+HEADER:
+pmapi.h
+
+MEMBERS:
+al - Value of the AL register
+ah - Value of the AH register
+bl - Value of the BL register
+bh - Value of the BH register
+cl - Value of the CL register
+ch - Value of the CH register
+dl - Value of the DL register
+dh - Value of the DH register
+****************************************************************************/
+#ifdef __BIG_ENDIAN__
+typedef struct {
+ u16 ax_hi;
+ u8 ah, al;
+ u16 bx_hi;
+ u8 bh, bl;
+ u16 cx_hi;
+ u8 ch, cl;
+ u16 dx_hi;
+ u8 dh, dl;
+} RMBYTEREGS;
+#else
+typedef struct {
+ u8 al;
+ u8 ah;
+ u16 ax_hi;
+ u8 bl;
+ u8 bh;
+ u16 bx_hi;
+ u8 cl;
+ u8 ch;
+ u16 cx_hi;
+ u8 dl;
+ u8 dh;
+ u16 dx_hi;
+} RMBYTEREGS;
+#endif
+
+/****************************************************************************
+REMARKS:
+Structure describing all the x86 CPU registers
+
+HEADER:
+pmapi.h
+
+MEMBERS:
+e - Member to access registers as 32-bit values
+x - Member to access registers as 16-bit values
+h - Member to access registers as 8-bit values
+****************************************************************************/
+typedef union {
+ RMDWORDREGS e;
+ RMWORDREGS x;
+ RMBYTEREGS h;
+} RMREGS;
+
+/****************************************************************************
+REMARKS:
+Structure describing all the x86 segment registers
+
+HEADER:
+pmapi.h
+
+MEMBERS:
+es - ES segment register
+cs - CS segment register
+ss - SS segment register
+ds - DS segment register
+fs - FS segment register
+gs - GS segment register
+****************************************************************************/
+typedef struct {
+ u16 es;
+ u16 cs;
+ u16 ss;
+ u16 ds;
+ u16 fs;
+ u16 gs;
+} RMSREGS;
+
+#endif /* __KERNEL__ */
+
+#ifndef __KERNEL__
+
+/****************************************************************************
+REMARKS:
+Structure defining all the BIOS Emulator API functions as exported from
+the Binary Portable DLL.
+{secret}
+****************************************************************************/
+typedef struct {
+ ulong dwSize;
+ ibool(PMAPIP BE_init) (u32 debugFlags, int memSize, BE_VGAInfo * info);
+ void (PMAPIP BE_setVGA) (BE_VGAInfo * info);
+ void (PMAPIP BE_getVGA) (BE_VGAInfo * info);
+ void *(PMAPIP BE_mapRealPointer) (uint r_seg, uint r_off);
+ void *(PMAPIP BE_getVESABuf) (uint * len, uint * rseg, uint * roff);
+ void (PMAPIP BE_callRealMode) (uint seg, uint off, RMREGS * regs,
+ RMSREGS * sregs);
+ int (PMAPIP BE_int86) (int intno, RMREGS * in, RMREGS * out);
+ int (PMAPIP BE_int86x) (int intno, RMREGS * in, RMREGS * out,
+ RMSREGS * sregs);
+ void *reserved1;
+ void (PMAPIP BE_exit) (void);
+} BE_exports;
+
+/****************************************************************************
+REMARKS:
+Function pointer type for the Binary Portable DLL initialisation entry point.
+{secret}
+****************************************************************************/
+typedef BE_exports *(PMAPIP BE_initLibrary_t) (PM_imports * PMImp);
+#endif
+
+#pragma pack()
+
+/*---------------------------- Global variables ---------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+/* {secret} Global BIOS emulator system environment */
+ extern BE_sysEnv _BE_env;
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+/* BIOS emulator library entry points */
+ int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info,
+ int shared);
+ void X86API BE_setVGA(BE_VGAInfo * info);
+ void X86API BE_getVGA(BE_VGAInfo * info);
+ void X86API BE_setDebugFlags(u32 debugFlags);
+ void *X86API BE_mapRealPointer(uint r_seg, uint r_off);
+ void *X86API BE_getVESABuf(uint * len, uint * rseg, uint * roff);
+ void X86API BE_callRealMode(uint seg, uint off, RMREGS * regs,
+ RMSREGS * sregs);
+ int X86API BE_int86(int intno, RMREGS * in, RMREGS * out);
+ int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out,
+ RMSREGS * sregs);
+ void X86API BE_exit(void);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+#endif /* __BIOSEMU_H */
diff --git a/drivers/bios_emulator/include/x86emu.h b/drivers/bios_emulator/include/x86emu.h
new file mode 100644
index 0000000..6004beb
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu.h
@@ -0,0 +1,191 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1996-1999 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for public specific functions.
+* Any application linking against us should only
+* include this header
+*
+****************************************************************************/
+
+#ifndef __X86EMU_X86EMU_H
+#define __X86EMU_X86EMU_H
+
+#include <asm/types.h>
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#define X86API
+#define X86APIP *
+typedef u16 X86EMU_pioAddr;
+
+#include "x86emu/regs.h"
+
+/*---------------------- Macros and type definitions ----------------------*/
+
+#pragma pack(1)
+
+/****************************************************************************
+REMARKS:
+Data structure containing ponters to programmed I/O functions used by the
+emulator. This is used so that the user program can hook all programmed
+I/O for the emulator to handled as necessary by the user program. By
+default the emulator contains simple functions that do not do access the
+hardware in any way. To allow the emualtor access the hardware, you will
+need to override the programmed I/O functions using the X86EMU_setupPioFuncs
+function.
+
+HEADER:
+x86emu.h
+
+MEMBERS:
+inb - Function to read a byte from an I/O port
+inw - Function to read a word from an I/O port
+inl - Function to read a dword from an I/O port
+outb - Function to write a byte to an I/O port
+outw - Function to write a word to an I/O port
+outl - Function to write a dword to an I/O port
+****************************************************************************/
+typedef struct {
+ u8(X86APIP inb) (X86EMU_pioAddr addr);
+ u16(X86APIP inw) (X86EMU_pioAddr addr);
+ u32(X86APIP inl) (X86EMU_pioAddr addr);
+ void (X86APIP outb) (X86EMU_pioAddr addr, u8 val);
+ void (X86APIP outw) (X86EMU_pioAddr addr, u16 val);
+ void (X86APIP outl) (X86EMU_pioAddr addr, u32 val);
+} X86EMU_pioFuncs;
+
+/****************************************************************************
+REMARKS:
+Data structure containing ponters to memory access functions used by the
+emulator. This is used so that the user program can hook all memory
+access functions as necessary for the emulator. By default the emulator
+contains simple functions that only access the internal memory of the
+emulator. If you need specialised functions to handle access to different
+types of memory (ie: hardware framebuffer accesses and BIOS memory access
+etc), you will need to override this using the X86EMU_setupMemFuncs
+function.
+
+HEADER:
+x86emu.h
+
+MEMBERS:
+rdb - Function to read a byte from an address
+rdw - Function to read a word from an address
+rdl - Function to read a dword from an address
+wrb - Function to write a byte to an address
+wrw - Function to write a word to an address
+wrl - Function to write a dword to an address
+****************************************************************************/
+typedef struct {
+ u8(X86APIP rdb) (u32 addr);
+ u16(X86APIP rdw) (u32 addr);
+ u32(X86APIP rdl) (u32 addr);
+ void (X86APIP wrb) (u32 addr, u8 val);
+ void (X86APIP wrw) (u32 addr, u16 val);
+ void (X86APIP wrl) (u32 addr, u32 val);
+} X86EMU_memFuncs;
+
+/****************************************************************************
+ Here are the default memory read and write
+ function in case they are needed as fallbacks.
+***************************************************************************/
+extern u8 X86API rdb(u32 addr);
+extern u16 X86API rdw(u32 addr);
+extern u32 X86API rdl(u32 addr);
+extern void X86API wrb(u32 addr, u8 val);
+extern void X86API wrw(u32 addr, u16 val);
+extern void X86API wrl(u32 addr, u32 val);
+
+#pragma pack()
+
+/*--------------------- type definitions -----------------------------------*/
+
+typedef void (X86APIP X86EMU_intrFuncs) (int num);
+extern X86EMU_intrFuncs _X86EMU_intrTab[256];
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+ void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs);
+ void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs);
+ void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]);
+ void X86EMU_prepareForInt(int num);
+
+/* decode.c */
+
+ void X86EMU_exec(void);
+ void X86EMU_halt_sys(void);
+
+#ifdef DEBUG
+#define HALT_SYS() \
+ printf("halt_sys: file %s, line %d\n", __FILE__, __LINE__), \
+ X86EMU_halt_sys()
+#else
+#define HALT_SYS() X86EMU_halt_sys()
+#endif
+
+/* Debug options */
+
+#define DEBUG_DECODE_F 0x0001 /* print decoded instruction */
+#define DEBUG_TRACE_F 0x0002 /* dump regs before/after execution */
+#define DEBUG_STEP_F 0x0004
+#define DEBUG_DISASSEMBLE_F 0x0008
+#define DEBUG_BREAK_F 0x0010
+#define DEBUG_SVC_F 0x0020
+#define DEBUG_SAVE_CS_IP 0x0040
+#define DEBUG_FS_F 0x0080
+#define DEBUG_PROC_F 0x0100
+#define DEBUG_SYSINT_F 0x0200 /* bios system interrupts. */
+#define DEBUG_TRACECALL_F 0x0400
+#define DEBUG_INSTRUMENT_F 0x0800
+#define DEBUG_MEM_TRACE_F 0x1000
+#define DEBUG_IO_TRACE_F 0x2000
+#define DEBUG_TRACECALL_REGS_F 0x4000
+#define DEBUG_DECODE_NOPRINT_F 0x8000
+#define DEBUG_EXIT 0x10000
+#define DEBUG_SYS_F (DEBUG_SVC_F|DEBUG_FS_F|DEBUG_PROC_F)
+
+ void X86EMU_trace_regs(void);
+ void X86EMU_trace_xregs(void);
+ void X86EMU_dump_memory(u16 seg, u16 off, u32 amt);
+ int X86EMU_trace_on(void);
+ int X86EMU_trace_off(void);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+#endif /* __X86EMU_X86EMU_H */
diff --git a/drivers/bios_emulator/include/x86emu/debug.h b/drivers/bios_emulator/include/x86emu/debug.h
new file mode 100644
index 0000000..35e1e9a
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/debug.h
@@ -0,0 +1,209 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for debug definitions.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_DEBUG_H
+#define __X86EMU_DEBUG_H
+
+/*---------------------- Macros and type definitions ----------------------*/
+
+/* checks to be enabled for "runtime" */
+
+#define CHECK_IP_FETCH_F 0x1
+#define CHECK_SP_ACCESS_F 0x2
+#define CHECK_MEM_ACCESS_F 0x4 /*using regular linear pointer */
+#define CHECK_DATA_ACCESS_F 0x8 /*using segment:offset */
+
+#ifdef DEBUG
+# define CHECK_IP_FETCH() (M.x86.check & CHECK_IP_FETCH_F)
+# define CHECK_SP_ACCESS() (M.x86.check & CHECK_SP_ACCESS_F)
+# define CHECK_MEM_ACCESS() (M.x86.check & CHECK_MEM_ACCESS_F)
+# define CHECK_DATA_ACCESS() (M.x86.check & CHECK_DATA_ACCESS_F)
+#else
+# define CHECK_IP_FETCH()
+# define CHECK_SP_ACCESS()
+# define CHECK_MEM_ACCESS()
+# define CHECK_DATA_ACCESS()
+#endif
+
+#ifdef DEBUG
+# define DEBUG_INSTRUMENT() (M.x86.debug & DEBUG_INSTRUMENT_F)
+# define DEBUG_DECODE() (M.x86.debug & DEBUG_DECODE_F)
+# define DEBUG_TRACE() (M.x86.debug & DEBUG_TRACE_F)
+# define DEBUG_STEP() (M.x86.debug & DEBUG_STEP_F)
+# define DEBUG_DISASSEMBLE() (M.x86.debug & DEBUG_DISASSEMBLE_F)
+# define DEBUG_BREAK() (M.x86.debug & DEBUG_BREAK_F)
+# define DEBUG_SVC() (M.x86.debug & DEBUG_SVC_F)
+# define DEBUG_SAVE_IP_CS() (M.x86.debug & DEBUG_SAVE_CS_IP)
+
+# define DEBUG_FS() (M.x86.debug & DEBUG_FS_F)
+# define DEBUG_PROC() (M.x86.debug & DEBUG_PROC_F)
+# define DEBUG_SYSINT() (M.x86.debug & DEBUG_SYSINT_F)
+# define DEBUG_TRACECALL() (M.x86.debug & DEBUG_TRACECALL_F)
+# define DEBUG_TRACECALLREGS() (M.x86.debug & DEBUG_TRACECALL_REGS_F)
+# define DEBUG_SYS() (M.x86.debug & DEBUG_SYS_F)
+# define DEBUG_MEM_TRACE() (M.x86.debug & DEBUG_MEM_TRACE_F)
+# define DEBUG_IO_TRACE() (M.x86.debug & DEBUG_IO_TRACE_F)
+# define DEBUG_DECODE_NOPRINT() (M.x86.debug & DEBUG_DECODE_NOPRINT_F)
+#else
+# define DEBUG_INSTRUMENT() 0
+# define DEBUG_DECODE() 0
+# define DEBUG_TRACE() 0
+# define DEBUG_STEP() 0
+# define DEBUG_DISASSEMBLE() 0
+# define DEBUG_BREAK() 0
+# define DEBUG_SVC() 0
+# define DEBUG_SAVE_IP_CS() 0
+# define DEBUG_FS() 0
+# define DEBUG_PROC() 0
+# define DEBUG_SYSINT() 0
+# define DEBUG_TRACECALL() 0
+# define DEBUG_TRACECALLREGS() 0
+# define DEBUG_SYS() 0
+# define DEBUG_MEM_TRACE() 0
+# define DEBUG_IO_TRACE() 0
+# define DEBUG_DECODE_NOPRINT() 0
+#endif
+
+#ifdef DEBUG
+
+# define DECODE_PRINTF(x) if (DEBUG_DECODE()) \
+ x86emu_decode_printf(x)
+# define DECODE_PRINTF2(x,y) if (DEBUG_DECODE()) \
+ x86emu_decode_printf2(x,y)
+
+/*
+ * The following allow us to look at the bytes of an instruction. The
+ * first INCR_INSTRN_LEN, is called everytime bytes are consumed in
+ * the decoding process. The SAVE_IP_CS is called initially when the
+ * major opcode of the instruction is accessed.
+ */
+#define INC_DECODED_INST_LEN(x) \
+ if (DEBUG_DECODE()) \
+ x86emu_inc_decoded_inst_len(x)
+
+#define SAVE_IP_CS(x,y) \
+ if (DEBUG_DECODE() | DEBUG_TRACECALL() | DEBUG_BREAK() \
+ | DEBUG_IO_TRACE() | DEBUG_SAVE_IP_CS()) { \
+ M.x86.saved_cs = x; \
+ M.x86.saved_ip = y; \
+ }
+#else
+# define INC_DECODED_INST_LEN(x)
+# define DECODE_PRINTF(x)
+# define DECODE_PRINTF2(x,y)
+# define SAVE_IP_CS(x,y)
+#endif
+
+#ifdef DEBUG
+#define TRACE_REGS() \
+ if (DEBUG_DISASSEMBLE()) { \
+ x86emu_just_disassemble(); \
+ goto EndOfTheInstructionProcedure; \
+ } \
+ if (DEBUG_TRACE() || DEBUG_DECODE()) X86EMU_trace_regs()
+#else
+# define TRACE_REGS()
+#endif
+
+#ifdef DEBUG
+# define SINGLE_STEP() if (DEBUG_STEP()) x86emu_single_step()
+#else
+# define SINGLE_STEP()
+#endif
+
+#define TRACE_AND_STEP() \
+ TRACE_REGS(); \
+ SINGLE_STEP()
+
+#ifdef DEBUG
+# define START_OF_INSTR()
+# define END_OF_INSTR() EndOfTheInstructionProcedure: x86emu_end_instr();
+# define END_OF_INSTR_NO_TRACE() x86emu_end_instr();
+#else
+# define START_OF_INSTR()
+# define END_OF_INSTR()
+# define END_OF_INSTR_NO_TRACE()
+#endif
+
+#ifdef DEBUG
+# define CALL_TRACE(u,v,w,x,s) \
+ if (DEBUG_TRACECALLREGS()) \
+ x86emu_dump_regs(); \
+ if (DEBUG_TRACECALL()) \
+ printk("%04x:%04x: CALL %s%04x:%04x\n", u , v, s, w, x);
+# define RETURN_TRACE(n,u,v) \
+ if (DEBUG_TRACECALLREGS()) \
+ x86emu_dump_regs(); \
+ if (DEBUG_TRACECALL()) \
+ printk("%04x:%04x: %s\n",u,v,n);
+#else
+# define CALL_TRACE(u,v,w,x,s)
+# define RETURN_TRACE(n,u,v)
+#endif
+
+#ifdef DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+ extern void x86emu_inc_decoded_inst_len(int x);
+ extern void x86emu_decode_printf(char *x);
+ extern void x86emu_decode_printf2(char *x, int y);
+ extern void x86emu_just_disassemble(void);
+ extern void x86emu_single_step(void);
+ extern void x86emu_end_instr(void);
+ extern void x86emu_dump_regs(void);
+ extern void x86emu_dump_xregs(void);
+ extern void x86emu_print_int_vect(u16 iv);
+ extern void x86emu_instrument_instruction(void);
+ extern void x86emu_check_ip_access(void);
+ extern void x86emu_check_sp_access(void);
+ extern void x86emu_check_mem_access(u32 p);
+ extern void x86emu_check_data_access(uint s, uint o);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+#endif /* __X86EMU_DEBUG_H */
diff --git a/drivers/bios_emulator/include/x86emu/decode.h b/drivers/bios_emulator/include/x86emu/decode.h
new file mode 100644
index 0000000..77769f0
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/decode.h
@@ -0,0 +1,88 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for instruction decoding logic.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_DECODE_H
+#define __X86EMU_DECODE_H
+
+/*---------------------- Macros and type definitions ----------------------*/
+
+/* Instruction Decoding Stuff */
+
+#define FETCH_DECODE_MODRM(mod,rh,rl) fetch_decode_modrm(&mod,&rh,&rl)
+#define DECODE_RM_BYTE_REGISTER(r) decode_rm_byte_register(r)
+#define DECODE_RM_WORD_REGISTER(r) decode_rm_word_register(r)
+#define DECODE_RM_LONG_REGISTER(r) decode_rm_long_register(r)
+#define DECODE_CLEAR_SEGOVR() M.x86.mode &= ~SYSMODE_CLRMASK
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+void x86emu_intr_raise (u8 type);
+void fetch_decode_modrm (int *mod,int *regh,int *regl);
+u8 fetch_byte_imm (void);
+u16 fetch_word_imm (void);
+u32 fetch_long_imm (void);
+u8 fetch_data_byte (uint offset);
+u8 fetch_data_byte_abs (uint segment, uint offset);
+u16 fetch_data_word (uint offset);
+u16 fetch_data_word_abs (uint segment, uint offset);
+u32 fetch_data_long (uint offset);
+u32 fetch_data_long_abs (uint segment, uint offset);
+void store_data_byte (uint offset, u8 val);
+void store_data_byte_abs (uint segment, uint offset, u8 val);
+void store_data_word (uint offset, u16 val);
+void store_data_word_abs (uint segment, uint offset, u16 val);
+void store_data_long (uint offset, u32 val);
+void store_data_long_abs (uint segment, uint offset, u32 val);
+u8* decode_rm_byte_register(int reg);
+u16* decode_rm_word_register(int reg);
+u32* decode_rm_long_register(int reg);
+u16* decode_rm_seg_register(int reg);
+unsigned decode_rm00_address(int rm);
+unsigned decode_rm01_address(int rm);
+unsigned decode_rm10_address(int rm);
+unsigned decode_rmXX_address(int mod, int rm);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+
+#endif /* __X86EMU_DECODE_H */
diff --git a/drivers/bios_emulator/include/x86emu/ops.h b/drivers/bios_emulator/include/x86emu/ops.h
new file mode 100644
index 0000000..a4f2316
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/ops.h
@@ -0,0 +1,45 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for operand decoding functions.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_OPS_H
+#define __X86EMU_OPS_H
+
+extern void (*x86emu_optab[0x100])(u8 op1);
+extern void (*x86emu_optab2[0x100])(u8 op2);
+
+#endif /* __X86EMU_OPS_H */
diff --git a/drivers/bios_emulator/include/x86emu/prim_asm.h b/drivers/bios_emulator/include/x86emu/prim_asm.h
new file mode 100644
index 0000000..4cb4cab
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/prim_asm.h
@@ -0,0 +1,970 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: Watcom C++ 10.6 or later
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Inline assembler versions of the primitive operand
+* functions for faster performance. At the moment this is
+* x86 inline assembler, but these functions could be replaced
+* with native inline assembler for each supported processor
+* platform.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_PRIM_ASM_H
+#define __X86EMU_PRIM_ASM_H
+
+#ifdef __WATCOMC__
+
+#ifndef VALIDATE
+#define __HAVE_INLINE_ASSEMBLER__
+#endif
+
+u32 get_flags_asm(void);
+#pragma aux get_flags_asm = \
+ "pushf" \
+ "pop eax" \
+ value [eax] \
+ modify exact [eax];
+
+u16 aaa_word_asm(u32 * flags, u16 d);
+#pragma aux aaa_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "aaa" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u16 aas_word_asm(u32 * flags, u16 d);
+#pragma aux aas_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "aas" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u16 aad_word_asm(u32 * flags, u16 d);
+#pragma aux aad_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "aad" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u16 aam_word_asm(u32 * flags, u8 d);
+#pragma aux aam_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "aam" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [ax] \
+ modify exact [ax];
+
+u8 adc_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux adc_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "adc al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 adc_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux adc_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "adc ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 adc_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux adc_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "adc eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 add_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux add_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "add al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 add_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux add_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "add ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 add_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux add_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "add eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 and_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux and_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "and al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 and_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux and_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "and ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 and_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux and_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "and eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 cmp_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux cmp_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "cmp al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 cmp_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux cmp_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "cmp ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 cmp_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux cmp_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "cmp eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 daa_byte_asm(u32 * flags, u8 d);
+#pragma aux daa_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "daa" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u8 das_byte_asm(u32 * flags, u8 d);
+#pragma aux das_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "das" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u8 dec_byte_asm(u32 * flags, u8 d);
+#pragma aux dec_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "dec al" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u16 dec_word_asm(u32 * flags, u16 d);
+#pragma aux dec_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "dec ax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u32 dec_long_asm(u32 * flags, u32 d);
+#pragma aux dec_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "dec eax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] \
+ value [eax] \
+ modify exact [eax];
+
+u8 inc_byte_asm(u32 * flags, u8 d);
+#pragma aux inc_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "inc al" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u16 inc_word_asm(u32 * flags, u16 d);
+#pragma aux inc_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "inc ax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u32 inc_long_asm(u32 * flags, u32 d);
+#pragma aux inc_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "inc eax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] \
+ value [eax] \
+ modify exact [eax];
+
+u8 or_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux or_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "or al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 or_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux or_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "or ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 or_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux or_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "or eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 neg_byte_asm(u32 * flags, u8 d);
+#pragma aux neg_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "neg al" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u16 neg_word_asm(u32 * flags, u16 d);
+#pragma aux neg_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "neg ax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u32 neg_long_asm(u32 * flags, u32 d);
+#pragma aux neg_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "neg eax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] \
+ value [eax] \
+ modify exact [eax];
+
+u8 not_byte_asm(u32 * flags, u8 d);
+#pragma aux not_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "not al" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] \
+ value [al] \
+ modify exact [al];
+
+u16 not_word_asm(u32 * flags, u16 d);
+#pragma aux not_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "not ax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] \
+ value [ax] \
+ modify exact [ax];
+
+u32 not_long_asm(u32 * flags, u32 d);
+#pragma aux not_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "not eax" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] \
+ value [eax] \
+ modify exact [eax];
+
+u8 rcl_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux rcl_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcl al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 rcl_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux rcl_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcl ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 rcl_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux rcl_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcl eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 rcr_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux rcr_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcr al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 rcr_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux rcr_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcr ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 rcr_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux rcr_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "rcr eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 rol_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux rol_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "rol al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 rol_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux rol_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "rol ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 rol_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux rol_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "rol eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 ror_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux ror_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "ror al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 ror_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux ror_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "ror ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 ror_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux ror_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "ror eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 shl_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux shl_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "shl al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 shl_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux shl_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "shl ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 shl_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux shl_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "shl eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 shr_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux shr_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "shr al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 shr_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux shr_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "shr ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 shr_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux shr_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "shr eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u8 sar_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux sar_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "sar al,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [cl] \
+ value [al] \
+ modify exact [al cl];
+
+u16 sar_word_asm(u32 * flags, u16 d, u8 s);
+#pragma aux sar_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "sar ax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [cl] \
+ value [ax] \
+ modify exact [ax cl];
+
+u32 sar_long_asm(u32 * flags, u32 d, u8 s);
+#pragma aux sar_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "sar eax,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [cl] \
+ value [eax] \
+ modify exact [eax cl];
+
+u16 shld_word_asm(u32 * flags, u16 d, u16 fill, u8 s);
+#pragma aux shld_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "shld ax,dx,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [dx] [cl] \
+ value [ax] \
+ modify exact [ax dx cl];
+
+u32 shld_long_asm(u32 * flags, u32 d, u32 fill, u8 s);
+#pragma aux shld_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "shld eax,edx,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [edx] [cl] \
+ value [eax] \
+ modify exact [eax edx cl];
+
+u16 shrd_word_asm(u32 * flags, u16 d, u16 fill, u8 s);
+#pragma aux shrd_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "shrd ax,dx,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [dx] [cl] \
+ value [ax] \
+ modify exact [ax dx cl];
+
+u32 shrd_long_asm(u32 * flags, u32 d, u32 fill, u8 s);
+#pragma aux shrd_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "shrd eax,edx,cl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [edx] [cl] \
+ value [eax] \
+ modify exact [eax edx cl];
+
+u8 sbb_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux sbb_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "sbb al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 sbb_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux sbb_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "sbb ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 sbb_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux sbb_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "sbb eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+u8 sub_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux sub_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "sub al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 sub_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux sub_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "sub ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 sub_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux sub_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "sub eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+void test_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux test_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "test al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ modify exact [al bl];
+
+void test_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux test_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "test ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ modify exact [ax bx];
+
+void test_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux test_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "test eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ modify exact [eax ebx];
+
+u8 xor_byte_asm(u32 * flags, u8 d, u8 s);
+#pragma aux xor_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "xor al,bl" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [al] [bl] \
+ value [al] \
+ modify exact [al bl];
+
+u16 xor_word_asm(u32 * flags, u16 d, u16 s);
+#pragma aux xor_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "xor ax,bx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [ax] [bx] \
+ value [ax] \
+ modify exact [ax bx];
+
+u32 xor_long_asm(u32 * flags, u32 d, u32 s);
+#pragma aux xor_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "xor eax,ebx" \
+ "pushf" \
+ "pop [edi]" \
+ parm [edi] [eax] [ebx] \
+ value [eax] \
+ modify exact [eax ebx];
+
+void imul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s);
+#pragma aux imul_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "imul bl" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ parm [edi] [esi] [al] [bl] \
+ modify exact [esi ax bl];
+
+void imul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s);
+#pragma aux imul_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "imul bx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ "mov [ecx],dx" \
+ parm [edi] [esi] [ecx] [ax] [bx]\
+ modify exact [esi edi ax bx dx];
+
+void imul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s);
+#pragma aux imul_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "imul ebx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],eax" \
+ "mov [ecx],edx" \
+ parm [edi] [esi] [ecx] [eax] [ebx] \
+ modify exact [esi edi eax ebx edx];
+
+void mul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s);
+#pragma aux mul_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "mul bl" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ parm [edi] [esi] [al] [bl] \
+ modify exact [esi ax bl];
+
+void mul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s);
+#pragma aux mul_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "mul bx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ "mov [ecx],dx" \
+ parm [edi] [esi] [ecx] [ax] [bx]\
+ modify exact [esi edi ax bx dx];
+
+void mul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s);
+#pragma aux mul_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "mul ebx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],eax" \
+ "mov [ecx],edx" \
+ parm [edi] [esi] [ecx] [eax] [ebx] \
+ modify exact [esi edi eax ebx edx];
+
+void idiv_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s);
+#pragma aux idiv_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "idiv bl" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],al" \
+ "mov [ecx],ah" \
+ parm [edi] [esi] [ecx] [ax] [bl]\
+ modify exact [esi edi ax bl];
+
+void idiv_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s);
+#pragma aux idiv_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "idiv bx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ "mov [ecx],dx" \
+ parm [edi] [esi] [ecx] [ax] [dx] [bx]\
+ modify exact [esi edi ax dx bx];
+
+void idiv_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s);
+#pragma aux idiv_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "idiv ebx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],eax" \
+ "mov [ecx],edx" \
+ parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
+ modify exact [esi edi eax edx ebx];
+
+void div_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s);
+#pragma aux div_byte_asm = \
+ "push [edi]" \
+ "popf" \
+ "div bl" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],al" \
+ "mov [ecx],ah" \
+ parm [edi] [esi] [ecx] [ax] [bl]\
+ modify exact [esi edi ax bl];
+
+void div_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s);
+#pragma aux div_word_asm = \
+ "push [edi]" \
+ "popf" \
+ "div bx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],ax" \
+ "mov [ecx],dx" \
+ parm [edi] [esi] [ecx] [ax] [dx] [bx]\
+ modify exact [esi edi ax dx bx];
+
+void div_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s);
+#pragma aux div_long_asm = \
+ "push [edi]" \
+ "popf" \
+ "div ebx" \
+ "pushf" \
+ "pop [edi]" \
+ "mov [esi],eax" \
+ "mov [ecx],edx" \
+ parm [edi] [esi] [ecx] [eax] [edx] [ebx]\
+ modify exact [esi edi eax edx ebx];
+
+#endif
+
+#endif /* __X86EMU_PRIM_ASM_H */
diff --git a/drivers/bios_emulator/include/x86emu/prim_ops.h b/drivers/bios_emulator/include/x86emu/prim_ops.h
new file mode 100644
index 0000000..0ea825d
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/prim_ops.h
@@ -0,0 +1,142 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for primitive operation functions.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_PRIM_OPS_H
+#define __X86EMU_PRIM_OPS_H
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+u16 aaa_word (u16 d);
+u16 aas_word (u16 d);
+u16 aad_word (u16 d);
+u16 aam_word (u8 d);
+u8 adc_byte (u8 d, u8 s);
+u16 adc_word (u16 d, u16 s);
+u32 adc_long (u32 d, u32 s);
+u8 add_byte (u8 d, u8 s);
+u16 add_word (u16 d, u16 s);
+u32 add_long (u32 d, u32 s);
+u8 and_byte (u8 d, u8 s);
+u16 and_word (u16 d, u16 s);
+u32 and_long (u32 d, u32 s);
+u8 cmp_byte (u8 d, u8 s);
+u16 cmp_word (u16 d, u16 s);
+u32 cmp_long (u32 d, u32 s);
+u8 daa_byte (u8 d);
+u8 das_byte (u8 d);
+u8 dec_byte (u8 d);
+u16 dec_word (u16 d);
+u32 dec_long (u32 d);
+u8 inc_byte (u8 d);
+u16 inc_word (u16 d);
+u32 inc_long (u32 d);
+u8 or_byte (u8 d, u8 s);
+u16 or_word (u16 d, u16 s);
+u32 or_long (u32 d, u32 s);
+u8 neg_byte (u8 s);
+u16 neg_word (u16 s);
+u32 neg_long (u32 s);
+u8 not_byte (u8 s);
+u16 not_word (u16 s);
+u32 not_long (u32 s);
+u8 rcl_byte (u8 d, u8 s);
+u16 rcl_word (u16 d, u8 s);
+u32 rcl_long (u32 d, u8 s);
+u8 rcr_byte (u8 d, u8 s);
+u16 rcr_word (u16 d, u8 s);
+u32 rcr_long (u32 d, u8 s);
+u8 rol_byte (u8 d, u8 s);
+u16 rol_word (u16 d, u8 s);
+u32 rol_long (u32 d, u8 s);
+u8 ror_byte (u8 d, u8 s);
+u16 ror_word (u16 d, u8 s);
+u32 ror_long (u32 d, u8 s);
+u8 shl_byte (u8 d, u8 s);
+u16 shl_word (u16 d, u8 s);
+u32 shl_long (u32 d, u8 s);
+u8 shr_byte (u8 d, u8 s);
+u16 shr_word (u16 d, u8 s);
+u32 shr_long (u32 d, u8 s);
+u8 sar_byte (u8 d, u8 s);
+u16 sar_word (u16 d, u8 s);
+u32 sar_long (u32 d, u8 s);
+u16 shld_word (u16 d, u16 fill, u8 s);
+u32 shld_long (u32 d, u32 fill, u8 s);
+u16 shrd_word (u16 d, u16 fill, u8 s);
+u32 shrd_long (u32 d, u32 fill, u8 s);
+u8 sbb_byte (u8 d, u8 s);
+u16 sbb_word (u16 d, u16 s);
+u32 sbb_long (u32 d, u32 s);
+u8 sub_byte (u8 d, u8 s);
+u16 sub_word (u16 d, u16 s);
+u32 sub_long (u32 d, u32 s);
+void test_byte (u8 d, u8 s);
+void test_word (u16 d, u16 s);
+void test_long (u32 d, u32 s);
+u8 xor_byte (u8 d, u8 s);
+u16 xor_word (u16 d, u16 s);
+u32 xor_long (u32 d, u32 s);
+void imul_byte (u8 s);
+void imul_word (u16 s);
+void imul_long (u32 s);
+void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s);
+void mul_byte (u8 s);
+void mul_word (u16 s);
+void mul_long (u32 s);
+void idiv_byte (u8 s);
+void idiv_word (u16 s);
+void idiv_long (u32 s);
+void div_byte (u8 s);
+void div_word (u16 s);
+void div_long (u32 s);
+void ins (int size);
+void outs (int size);
+u16 mem_access_word (int addr);
+void push_word (u16 w);
+void push_long (u32 w);
+u16 pop_word (void);
+u32 pop_long (void);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+
+#endif /* __X86EMU_PRIM_OPS_H */
+
diff --git a/drivers/bios_emulator/include/x86emu/regs.h b/drivers/bios_emulator/include/x86emu/regs.h
new file mode 100644
index 0000000..9dbed50
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/regs.h
@@ -0,0 +1,340 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for x86 register definitions.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_REGS_H
+#define __X86EMU_REGS_H
+
+/*---------------------- Macros and type definitions ----------------------*/
+
+#pragma pack(1)
+
+/*
+ * General EAX, EBX, ECX, EDX type registers. Note that for
+ * portability, and speed, the issue of byte swapping is not addressed
+ * in the registers. All registers are stored in the default format
+ * available on the host machine. The only critical issue is that the
+ * registers should line up EXACTLY in the same manner as they do in
+ * the 386. That is:
+ *
+ * EAX & 0xff === AL
+ * EAX & 0xffff == AX
+ *
+ * etc. The result is that alot of the calculations can then be
+ * done using the native instruction set fully.
+ */
+
+#ifdef __BIG_ENDIAN__
+
+typedef struct {
+ u32 e_reg;
+} I32_reg_t;
+
+typedef struct {
+ u16 filler0, x_reg;
+} I16_reg_t;
+
+typedef struct {
+ u8 filler0, filler1, h_reg, l_reg;
+} I8_reg_t;
+
+#else /* !__BIG_ENDIAN__ */
+
+typedef struct {
+ u32 e_reg;
+} I32_reg_t;
+
+typedef struct {
+ u16 x_reg;
+} I16_reg_t;
+
+typedef struct {
+ u8 l_reg, h_reg;
+} I8_reg_t;
+
+#endif /* BIG_ENDIAN */
+
+typedef union {
+ I32_reg_t I32_reg;
+ I16_reg_t I16_reg;
+ I8_reg_t I8_reg;
+} i386_general_register;
+
+struct i386_general_regs {
+ i386_general_register A, B, C, D;
+};
+
+typedef struct i386_general_regs Gen_reg_t;
+
+struct i386_special_regs {
+ i386_general_register SP, BP, SI, DI, IP;
+ u32 FLAGS;
+};
+
+/*
+ * Segment registers here represent the 16 bit quantities
+ * CS, DS, ES, SS.
+ */
+
+#undef CS
+#undef DS
+#undef SS
+#undef ES
+#undef FS
+#undef GS
+
+struct i386_segment_regs {
+ u16 CS, DS, SS, ES, FS, GS;
+};
+
+/* 8 bit registers */
+#define R_AH gen.A.I8_reg.h_reg
+#define R_AL gen.A.I8_reg.l_reg
+#define R_BH gen.B.I8_reg.h_reg
+#define R_BL gen.B.I8_reg.l_reg
+#define R_CH gen.C.I8_reg.h_reg
+#define R_CL gen.C.I8_reg.l_reg
+#define R_DH gen.D.I8_reg.h_reg
+#define R_DL gen.D.I8_reg.l_reg
+
+/* 16 bit registers */
+#define R_AX gen.A.I16_reg.x_reg
+#define R_BX gen.B.I16_reg.x_reg
+#define R_CX gen.C.I16_reg.x_reg
+#define R_DX gen.D.I16_reg.x_reg
+
+/* 32 bit extended registers */
+#define R_EAX gen.A.I32_reg.e_reg
+#define R_EBX gen.B.I32_reg.e_reg
+#define R_ECX gen.C.I32_reg.e_reg
+#define R_EDX gen.D.I32_reg.e_reg
+
+/* special registers */
+#define R_SP spc.SP.I16_reg.x_reg
+#define R_BP spc.BP.I16_reg.x_reg
+#define R_SI spc.SI.I16_reg.x_reg
+#define R_DI spc.DI.I16_reg.x_reg
+#define R_IP spc.IP.I16_reg.x_reg
+#define R_FLG spc.FLAGS
+
+/* special registers */
+#define R_SP spc.SP.I16_reg.x_reg
+#define R_BP spc.BP.I16_reg.x_reg
+#define R_SI spc.SI.I16_reg.x_reg
+#define R_DI spc.DI.I16_reg.x_reg
+#define R_IP spc.IP.I16_reg.x_reg
+#define R_FLG spc.FLAGS
+
+/* special registers */
+#define R_ESP spc.SP.I32_reg.e_reg
+#define R_EBP spc.BP.I32_reg.e_reg
+#define R_ESI spc.SI.I32_reg.e_reg
+#define R_EDI spc.DI.I32_reg.e_reg
+#define R_EIP spc.IP.I32_reg.e_reg
+#define R_EFLG spc.FLAGS
+
+/* segment registers */
+#define R_CS seg.CS
+#define R_DS seg.DS
+#define R_SS seg.SS
+#define R_ES seg.ES
+#define R_FS seg.FS
+#define R_GS seg.GS
+
+/* flag conditions */
+#define FB_CF 0x0001 /* CARRY flag */
+#define FB_PF 0x0004 /* PARITY flag */
+#define FB_AF 0x0010 /* AUX flag */
+#define FB_ZF 0x0040 /* ZERO flag */
+#define FB_SF 0x0080 /* SIGN flag */
+#define FB_TF 0x0100 /* TRAP flag */
+#define FB_IF 0x0200 /* INTERRUPT ENABLE flag */
+#define FB_DF 0x0400 /* DIR flag */
+#define FB_OF 0x0800 /* OVERFLOW flag */
+
+/* 80286 and above always have bit#1 set */
+#define F_ALWAYS_ON (0x0002) /* flag bits always on */
+
+/*
+ * Define a mask for only those flag bits we will ever pass back
+ * (via PUSHF)
+ */
+#define F_MSK (FB_CF|FB_PF|FB_AF|FB_ZF|FB_SF|FB_TF|FB_IF|FB_DF|FB_OF)
+
+/* following bits masked in to a 16bit quantity */
+
+#define F_CF 0x0001 /* CARRY flag */
+#define F_PF 0x0004 /* PARITY flag */
+#define F_AF 0x0010 /* AUX flag */
+#define F_ZF 0x0040 /* ZERO flag */
+#define F_SF 0x0080 /* SIGN flag */
+#define F_TF 0x0100 /* TRAP flag */
+#define F_IF 0x0200 /* INTERRUPT ENABLE flag */
+#define F_DF 0x0400 /* DIR flag */
+#define F_OF 0x0800 /* OVERFLOW flag */
+
+#define TOGGLE_FLAG(flag) (M.x86.R_FLG ^= (flag))
+#define SET_FLAG(flag) (M.x86.R_FLG |= (flag))
+#define CLEAR_FLAG(flag) (M.x86.R_FLG &= ~(flag))
+#define ACCESS_FLAG(flag) (M.x86.R_FLG & (flag))
+#define CLEARALL_FLAG(m) (M.x86.R_FLG = 0)
+
+#define CONDITIONAL_SET_FLAG(COND,FLAG) \
+ if (COND) SET_FLAG(FLAG); else CLEAR_FLAG(FLAG)
+
+#define F_PF_CALC 0x010000 /* PARITY flag has been calced */
+#define F_ZF_CALC 0x020000 /* ZERO flag has been calced */
+#define F_SF_CALC 0x040000 /* SIGN flag has been calced */
+
+#define F_ALL_CALC 0xff0000 /* All have been calced */
+
+/*
+ * Emulator machine state.
+ * Segment usage control.
+ */
+#define SYSMODE_SEG_DS_SS 0x00000001
+#define SYSMODE_SEGOVR_CS 0x00000002
+#define SYSMODE_SEGOVR_DS 0x00000004
+#define SYSMODE_SEGOVR_ES 0x00000008
+#define SYSMODE_SEGOVR_FS 0x00000010
+#define SYSMODE_SEGOVR_GS 0x00000020
+#define SYSMODE_SEGOVR_SS 0x00000040
+#define SYSMODE_PREFIX_REPE 0x00000080
+#define SYSMODE_PREFIX_REPNE 0x00000100
+#define SYSMODE_PREFIX_DATA 0x00000200
+#define SYSMODE_PREFIX_ADDR 0x00000400
+#define SYSMODE_INTR_PENDING 0x10000000
+#define SYSMODE_EXTRN_INTR 0x20000000
+#define SYSMODE_HALTED 0x40000000
+
+#define SYSMODE_SEGMASK (SYSMODE_SEG_DS_SS | \
+ SYSMODE_SEGOVR_CS | \
+ SYSMODE_SEGOVR_DS | \
+ SYSMODE_SEGOVR_ES | \
+ SYSMODE_SEGOVR_FS | \
+ SYSMODE_SEGOVR_GS | \
+ SYSMODE_SEGOVR_SS)
+#define SYSMODE_CLRMASK (SYSMODE_SEG_DS_SS | \
+ SYSMODE_SEGOVR_CS | \
+ SYSMODE_SEGOVR_DS | \
+ SYSMODE_SEGOVR_ES | \
+ SYSMODE_SEGOVR_FS | \
+ SYSMODE_SEGOVR_GS | \
+ SYSMODE_SEGOVR_SS | \
+ SYSMODE_PREFIX_DATA | \
+ SYSMODE_PREFIX_ADDR)
+
+#define INTR_SYNCH 0x1
+#define INTR_ASYNCH 0x2
+#define INTR_HALTED 0x4
+
+typedef struct {
+ struct i386_general_regs gen;
+ struct i386_special_regs spc;
+ struct i386_segment_regs seg;
+ /*
+ * MODE contains information on:
+ * REPE prefix 2 bits repe,repne
+ * SEGMENT overrides 5 bits normal,DS,SS,CS,ES
+ * Delayed flag set 3 bits (zero, signed, parity)
+ * reserved 6 bits
+ * interrupt # 8 bits instruction raised interrupt
+ * BIOS video segregs 4 bits
+ * Interrupt Pending 1 bits
+ * Extern interrupt 1 bits
+ * Halted 1 bits
+ */
+ long mode;
+ u8 intno;
+ volatile int intr; /* mask of pending interrupts */
+ int debug;
+#ifdef DEBUG
+ int check;
+ u16 saved_ip;
+ u16 saved_cs;
+ int enc_pos;
+ int enc_str_pos;
+ char decode_buf[32]; /* encoded byte stream */
+ char decoded_buf[256]; /* disassembled strings */
+#endif
+} X86EMU_regs;
+
+/****************************************************************************
+REMARKS:
+Structure maintaining the emulator machine state.
+
+MEMBERS:
+x86 - X86 registers
+mem_base - Base real mode memory for the emulator
+mem_size - Size of the real mode memory block for the emulator
+****************************************************************************/
+#undef x86
+typedef struct {
+ X86EMU_regs x86;
+ u8 *mem_base;
+ u32 mem_size;
+ void *private;
+} X86EMU_sysEnv;
+
+#pragma pack()
+
+/*----------------------------- Global Variables --------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+/* Global emulator machine state.
+ *
+ * We keep it global to avoid pointer dereferences in the code for speed.
+ */
+
+ extern X86EMU_sysEnv _X86EMU_env;
+#define M _X86EMU_env
+
+/*-------------------------- Function Prototypes --------------------------*/
+
+/* Function to log information at runtime */
+
+#ifndef __KERNEL__
+ void printk(const char *fmt, ...);
+#endif
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+#endif /* __X86EMU_REGS_H */
diff --git a/drivers/bios_emulator/include/x86emu/x86emui.h b/drivers/bios_emulator/include/x86emu/x86emui.h
new file mode 100644
index 0000000..a74957d
--- /dev/null
+++ b/drivers/bios_emulator/include/x86emu/x86emui.h
@@ -0,0 +1,101 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: Header file for system specific functions. These functions
+* are always compiled and linked in the OS depedent libraries,
+* and never in a binary portable driver.
+*
+****************************************************************************/
+
+#ifndef __X86EMU_X86EMUI_H
+#define __X86EMU_X86EMUI_H
+
+/* If we are compiling in C++ mode, we can compile some functions as
+ * inline to increase performance (however the code size increases quite
+ * dramatically in this case).
+ */
+
+#if defined(__cplusplus) && !defined(_NO_INLINE)
+#define _INLINE inline
+#else
+#define _INLINE static
+#endif
+
+/* Get rid of unused parameters in C++ compilation mode */
+
+#ifdef __cplusplus
+#define X86EMU_UNUSED(v)
+#else
+#define X86EMU_UNUSED(v) v
+#endif
+
+#include "x86emu.h"
+#include "x86emu/regs.h"
+#include "x86emu/debug.h"
+#include "x86emu/decode.h"
+#include "x86emu/ops.h"
+#include "x86emu/prim_ops.h"
+#ifndef __KERNEL__
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#endif
+
+#define printk printf
+
+
+/*--------------------------- Inline Functions ----------------------------*/
+
+#ifdef __cplusplus
+extern "C" { /* Use "C" linkage when in C++ mode */
+#endif
+
+ extern u8(X86APIP sys_rdb) (u32 addr);
+ extern u16(X86APIP sys_rdw) (u32 addr);
+ extern u32(X86APIP sys_rdl) (u32 addr);
+ extern void (X86APIP sys_wrb) (u32 addr, u8 val);
+ extern void (X86APIP sys_wrw) (u32 addr, u16 val);
+ extern void (X86APIP sys_wrl) (u32 addr, u32 val);
+
+ extern u8(X86APIP sys_inb) (X86EMU_pioAddr addr);
+ extern u16(X86APIP sys_inw) (X86EMU_pioAddr addr);
+ extern u32(X86APIP sys_inl) (X86EMU_pioAddr addr);
+ extern void (X86APIP sys_outb) (X86EMU_pioAddr addr, u8 val);
+ extern void (X86APIP sys_outw) (X86EMU_pioAddr addr, u16 val);
+ extern void (X86APIP sys_outl) (X86EMU_pioAddr addr, u32 val);
+
+#ifdef __cplusplus
+} /* End of "C" linkage for C++ */
+#endif
+#endif /* __X86EMU_X86EMUI_H */
diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c
new file mode 100644
index 0000000..0f58a69
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/debug.c
@@ -0,0 +1,461 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file contains the code to handle debugging of the
+* emulator.
+*
+****************************************************************************/
+
+#include "x86emu/x86emui.h"
+#include <stdarg.h>
+
+/*----------------------------- Implementation ----------------------------*/
+
+#ifdef DEBUG
+
+static void print_encoded_bytes(u16 s, u16 o);
+static void print_decoded_instruction(void);
+static int parse_line(char *s, int *ps, int *n);
+
+/* should look something like debug's output. */
+void X86EMU_trace_regs(void)
+{
+ if (DEBUG_TRACE()) {
+ x86emu_dump_regs();
+ }
+ if (DEBUG_DECODE() && !DEBUG_DECODE_NOPRINT()) {
+ printk("%04x:%04x ", M.x86.saved_cs, M.x86.saved_ip);
+ print_encoded_bytes(M.x86.saved_cs, M.x86.saved_ip);
+ print_decoded_instruction();
+ }
+}
+
+void X86EMU_trace_xregs(void)
+{
+ if (DEBUG_TRACE()) {
+ x86emu_dump_xregs();
+ }
+}
+
+void x86emu_just_disassemble(void)
+{
+ /*
+ * This routine called if the flag DEBUG_DISASSEMBLE is set kind
+ * of a hack!
+ */
+ printk("%04x:%04x ", M.x86.saved_cs, M.x86.saved_ip);
+ print_encoded_bytes(M.x86.saved_cs, M.x86.saved_ip);
+ print_decoded_instruction();
+}
+
+static void disassemble_forward(u16 seg, u16 off, int n)
+{
+ X86EMU_sysEnv tregs;
+ int i;
+ u8 op1;
+ /*
+ * hack, hack, hack. What we do is use the exact machinery set up
+ * for execution, except that now there is an additional state
+ * flag associated with the "execution", and we are using a copy
+ * of the register struct. All the major opcodes, once fully
+ * decoded, have the following two steps: TRACE_REGS(r,m);
+ * SINGLE_STEP(r,m); which disappear if DEBUG is not defined to
+ * the preprocessor. The TRACE_REGS macro expands to:
+ *
+ * if (debug&DEBUG_DISASSEMBLE)
+ * {just_disassemble(); goto EndOfInstruction;}
+ * if (debug&DEBUG_TRACE) trace_regs(r,m);
+ *
+ * ...... and at the last line of the routine.
+ *
+ * EndOfInstruction: end_instr();
+ *
+ * Up to the point where TRACE_REG is expanded, NO modifications
+ * are done to any register EXCEPT the IP register, for fetch and
+ * decoding purposes.
+ *
+ * This was done for an entirely different reason, but makes a
+ * nice way to get the system to help debug codes.
+ */
+ tregs = M;
+ tregs.x86.R_IP = off;
+ tregs.x86.R_CS = seg;
+
+ /* reset the decoding buffers */
+ tregs.x86.enc_str_pos = 0;
+ tregs.x86.enc_pos = 0;
+
+ /* turn on the "disassemble only, no execute" flag */
+ tregs.x86.debug |= DEBUG_DISASSEMBLE_F;
+
+ /* DUMP NEXT n instructions to screen in straight_line fashion */
+ /*
+ * This looks like the regular instruction fetch stream, except
+ * that when this occurs, each fetched opcode, upon seeing the
+ * DEBUG_DISASSEMBLE flag set, exits immediately after decoding
+ * the instruction. XXX --- CHECK THAT MEM IS NOT AFFECTED!!!
+ * Note the use of a copy of the register structure...
+ */
+ for (i = 0; i < n; i++) {
+ op1 = (*sys_rdb) (((u32) M.x86.R_CS << 4) + (M.x86.R_IP++));
+ (x86emu_optab[op1]) (op1);
+ }
+ /* end major hack mode. */
+}
+
+void x86emu_check_ip_access(void)
+{
+ /* NULL as of now */
+}
+
+void x86emu_check_sp_access(void)
+{
+}
+
+void x86emu_check_mem_access(u32 dummy)
+{
+ /* check bounds, etc */
+}
+
+void x86emu_check_data_access(uint dummy1, uint dummy2)
+{
+ /* check bounds, etc */
+}
+
+void x86emu_inc_decoded_inst_len(int x)
+{
+ M.x86.enc_pos += x;
+}
+
+void x86emu_decode_printf(char *x)
+{
+ sprintf(M.x86.decoded_buf + M.x86.enc_str_pos, "%s", x);
+ M.x86.enc_str_pos += strlen(x);
+}
+
+void x86emu_decode_printf2(char *x, int y)
+{
+ char temp[100];
+ sprintf(temp, x, y);
+ sprintf(M.x86.decoded_buf + M.x86.enc_str_pos, "%s", temp);
+ M.x86.enc_str_pos += strlen(temp);
+}
+
+void x86emu_end_instr(void)
+{
+ M.x86.enc_str_pos = 0;
+ M.x86.enc_pos = 0;
+}
+
+static void print_encoded_bytes(u16 s, u16 o)
+{
+ int i;
+ char buf1[64];
+ for (i = 0; i < M.x86.enc_pos; i++) {
+ sprintf(buf1 + 2 * i, "%02x", fetch_data_byte_abs(s, o + i));
+ }
+ printk("%-20s", buf1);
+}
+
+static void print_decoded_instruction(void)
+{
+ printk("%s", M.x86.decoded_buf);
+}
+
+void x86emu_print_int_vect(u16 iv)
+{
+ u16 seg, off;
+
+ if (iv > 256)
+ return;
+ seg = fetch_data_word_abs(0, iv * 4);
+ off = fetch_data_word_abs(0, iv * 4 + 2);
+ printk("%04x:%04x ", seg, off);
+}
+
+void X86EMU_dump_memory(u16 seg, u16 off, u32 amt)
+{
+ u32 start = off & 0xfffffff0;
+ u32 end = (off + 16) & 0xfffffff0;
+ u32 i;
+ u32 current;
+
+ current = start;
+ while (end <= off + amt) {
+ printk("%04x:%04x ", seg, start);
+ for (i = start; i < off; i++)
+ printk(" ");
+ for (; i < end; i++)
+ printk("%02x ", fetch_data_byte_abs(seg, i));
+ printk("\n");
+ start = end;
+ end = start + 16;
+ }
+}
+
+void x86emu_single_step(void)
+{
+ char s[1024];
+ int ps[10];
+ int ntok;
+ int cmd;
+ int done;
+ int segment;
+ int offset;
+ static int breakpoint;
+ static int noDecode = 1;
+
+ char *p;
+
+ if (DEBUG_BREAK()) {
+ if (M.x86.saved_ip != breakpoint) {
+ return;
+ } else {
+ M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
+ M.x86.debug |= DEBUG_TRACE_F;
+ M.x86.debug &= ~DEBUG_BREAK_F;
+ print_decoded_instruction();
+ X86EMU_trace_regs();
+ }
+ }
+ done = 0;
+ offset = M.x86.saved_ip;
+ while (!done) {
+ printk("-");
+ cmd = parse_line(s, ps, &ntok);
+ switch (cmd) {
+ case 'u':
+ disassemble_forward(M.x86.saved_cs, (u16) offset, 10);
+ break;
+ case 'd':
+ if (ntok == 2) {
+ segment = M.x86.saved_cs;
+ offset = ps[1];
+ X86EMU_dump_memory(segment, (u16) offset, 16);
+ offset += 16;
+ } else if (ntok == 3) {
+ segment = ps[1];
+ offset = ps[2];
+ X86EMU_dump_memory(segment, (u16) offset, 16);
+ offset += 16;
+ } else {
+ segment = M.x86.saved_cs;
+ X86EMU_dump_memory(segment, (u16) offset, 16);
+ offset += 16;
+ }
+ break;
+ case 'c':
+ M.x86.debug ^= DEBUG_TRACECALL_F;
+ break;
+ case 's':
+ M.x86.debug ^=
+ DEBUG_SVC_F | DEBUG_SYS_F | DEBUG_SYSINT_F;
+ break;
+ case 'r':
+ X86EMU_trace_regs();
+ break;
+ case 'x':
+ X86EMU_trace_xregs();
+ break;
+ case 'g':
+ if (ntok == 2) {
+ breakpoint = ps[1];
+ if (noDecode) {
+ M.x86.debug |= DEBUG_DECODE_NOPRINT_F;
+ } else {
+ M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
+ }
+ M.x86.debug &= ~DEBUG_TRACE_F;
+ M.x86.debug |= DEBUG_BREAK_F;
+ done = 1;
+ }
+ break;
+ case 'q':
+ M.x86.debug |= DEBUG_EXIT;
+ return;
+ case 'P':
+ noDecode = (noDecode) ? 0 : 1;
+ printk("Toggled decoding to %s\n",
+ (noDecode) ? "FALSE" : "TRUE");
+ break;
+ case 't':
+ case 0:
+ done = 1;
+ break;
+ }
+ }
+}
+
+int X86EMU_trace_on(void)
+{
+ return M.x86.debug |= DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F;
+}
+
+int X86EMU_trace_off(void)
+{
+ return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F);
+}
+
+static int parse_line(char *s, int *ps, int *n)
+{
+ int cmd;
+
+ *n = 0;
+ while (*s == ' ' || *s == '\t')
+ s++;
+ ps[*n] = *s;
+ switch (*s) {
+ case '\n':
+ *n += 1;
+ return 0;
+ default:
+ cmd = *s;
+ *n += 1;
+ }
+
+ while (1) {
+ while (*s != ' ' && *s != '\t' && *s != '\n')
+ s++;
+
+ if (*s == '\n')
+ return cmd;
+
+ while (*s == ' ' || *s == '\t')
+ s++;
+
+ *n += 1;
+ }
+}
+
+#endif /* DEBUG */
+
+void x86emu_dump_regs(void)
+{
+ printk("\tAX=%04x ", M.x86.R_AX);
+ printk("BX=%04x ", M.x86.R_BX);
+ printk("CX=%04x ", M.x86.R_CX);
+ printk("DX=%04x ", M.x86.R_DX);
+ printk("SP=%04x ", M.x86.R_SP);
+ printk("BP=%04x ", M.x86.R_BP);
+ printk("SI=%04x ", M.x86.R_SI);
+ printk("DI=%04x\n", M.x86.R_DI);
+ printk("\tDS=%04x ", M.x86.R_DS);
+ printk("ES=%04x ", M.x86.R_ES);
+ printk("SS=%04x ", M.x86.R_SS);
+ printk("CS=%04x ", M.x86.R_CS);
+ printk("IP=%04x ", M.x86.R_IP);
+ if (ACCESS_FLAG(F_OF))
+ printk("OV "); /* CHECKED... */
+ else
+ printk("NV ");
+ if (ACCESS_FLAG(F_DF))
+ printk("DN ");
+ else
+ printk("UP ");
+ if (ACCESS_FLAG(F_IF))
+ printk("EI ");
+ else
+ printk("DI ");
+ if (ACCESS_FLAG(F_SF))
+ printk("NG ");
+ else
+ printk("PL ");
+ if (ACCESS_FLAG(F_ZF))
+ printk("ZR ");
+ else
+ printk("NZ ");
+ if (ACCESS_FLAG(F_AF))
+ printk("AC ");
+ else
+ printk("NA ");
+ if (ACCESS_FLAG(F_PF))
+ printk("PE ");
+ else
+ printk("PO ");
+ if (ACCESS_FLAG(F_CF))
+ printk("CY ");
+ else
+ printk("NC ");
+ printk("\n");
+}
+
+void x86emu_dump_xregs(void)
+{
+ printk("\tEAX=%08x ", M.x86.R_EAX);
+ printk("EBX=%08x ", M.x86.R_EBX);
+ printk("ECX=%08x ", M.x86.R_ECX);
+ printk("EDX=%08x \n", M.x86.R_EDX);
+ printk("\tESP=%08x ", M.x86.R_ESP);
+ printk("EBP=%08x ", M.x86.R_EBP);
+ printk("ESI=%08x ", M.x86.R_ESI);
+ printk("EDI=%08x\n", M.x86.R_EDI);
+ printk("\tDS=%04x ", M.x86.R_DS);
+ printk("ES=%04x ", M.x86.R_ES);
+ printk("SS=%04x ", M.x86.R_SS);
+ printk("CS=%04x ", M.x86.R_CS);
+ printk("EIP=%08x\n\t", M.x86.R_EIP);
+ if (ACCESS_FLAG(F_OF))
+ printk("OV "); /* CHECKED... */
+ else
+ printk("NV ");
+ if (ACCESS_FLAG(F_DF))
+ printk("DN ");
+ else
+ printk("UP ");
+ if (ACCESS_FLAG(F_IF))
+ printk("EI ");
+ else
+ printk("DI ");
+ if (ACCESS_FLAG(F_SF))
+ printk("NG ");
+ else
+ printk("PL ");
+ if (ACCESS_FLAG(F_ZF))
+ printk("ZR ");
+ else
+ printk("NZ ");
+ if (ACCESS_FLAG(F_AF))
+ printk("AC ");
+ else
+ printk("NA ");
+ if (ACCESS_FLAG(F_PF))
+ printk("PE ");
+ else
+ printk("PO ");
+ if (ACCESS_FLAG(F_CF))
+ printk("CY ");
+ else
+ printk("NC ");
+ printk("\n");
+}
diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c
new file mode 100644
index 0000000..b4dbb20
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/decode.c
@@ -0,0 +1,1148 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file includes subroutines which are related to
+* instruction decoding and accessess of immediate data via IP. etc.
+*
+****************************************************************************/
+
+#include "x86emu/x86emui.h"
+
+/*----------------------------- Implementation ----------------------------*/
+
+/****************************************************************************
+REMARKS:
+Handles any pending asychronous interrupts.
+****************************************************************************/
+static void x86emu_intr_handle(void)
+{
+ u8 intno;
+
+ if (M.x86.intr & INTR_SYNCH) {
+ intno = M.x86.intno;
+ if (_X86EMU_intrTab[intno]) {
+ (*_X86EMU_intrTab[intno])(intno);
+ } else {
+ push_word((u16)M.x86.R_FLG);
+ CLEAR_FLAG(F_IF);
+ CLEAR_FLAG(F_TF);
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = mem_access_word(intno * 4 + 2);
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = mem_access_word(intno * 4);
+ M.x86.intr = 0;
+ }
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+intrnum - Interrupt number to raise
+
+REMARKS:
+Raise the specified interrupt to be handled before the execution of the
+next instruction.
+****************************************************************************/
+void x86emu_intr_raise(
+ u8 intrnum)
+{
+ M.x86.intno = intrnum;
+ M.x86.intr |= INTR_SYNCH;
+}
+
+/****************************************************************************
+REMARKS:
+Main execution loop for the emulator. We return from here when the system
+halts, which is normally caused by a stack fault when we return from the
+original real mode call.
+****************************************************************************/
+void X86EMU_exec(void)
+{
+ u8 op1;
+
+ M.x86.intr = 0;
+ DB(x86emu_end_instr();)
+
+ for (;;) {
+DB( if (CHECK_IP_FETCH())
+ x86emu_check_ip_access();)
+ /* If debugging, save the IP and CS values. */
+ SAVE_IP_CS(M.x86.R_CS, M.x86.R_IP);
+ INC_DECODED_INST_LEN(1);
+ if (M.x86.intr) {
+ if (M.x86.intr & INTR_HALTED) {
+DB( if (M.x86.R_SP != 0) {
+ printk("halted\n");
+ X86EMU_trace_regs();
+ }
+ else {
+ if (M.x86.debug)
+ printk("Service completed successfully\n");
+ })
+ return;
+ }
+ if (((M.x86.intr & INTR_SYNCH) && (M.x86.intno == 0 || M.x86.intno == 2)) ||
+ !ACCESS_FLAG(F_IF)) {
+ x86emu_intr_handle();
+ }
+ }
+ op1 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
+ (*x86emu_optab[op1])(op1);
+ if (M.x86.debug & DEBUG_EXIT) {
+ M.x86.debug &= ~DEBUG_EXIT;
+ return;
+ }
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Halts the system by setting the halted system flag.
+****************************************************************************/
+void X86EMU_halt_sys(void)
+{
+ M.x86.intr |= INTR_HALTED;
+}
+
+/****************************************************************************
+PARAMETERS:
+mod - Mod value from decoded byte
+regh - Reg h value from decoded byte
+regl - Reg l value from decoded byte
+
+REMARKS:
+Raise the specified interrupt to be handled before the execution of the
+next instruction.
+
+NOTE: Do not inline this function, as (*sys_rdb) is already inline!
+****************************************************************************/
+void fetch_decode_modrm(
+ int *mod,
+ int *regh,
+ int *regl)
+{
+ int fetched;
+
+DB( if (CHECK_IP_FETCH())
+ x86emu_check_ip_access();)
+ fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
+ INC_DECODED_INST_LEN(1);
+ *mod = (fetched >> 6) & 0x03;
+ *regh = (fetched >> 3) & 0x07;
+ *regl = (fetched >> 0) & 0x07;
+}
+
+/****************************************************************************
+RETURNS:
+Immediate byte value read from instruction queue
+
+REMARKS:
+This function returns the immediate byte from the instruction queue, and
+moves the instruction pointer to the next value.
+
+NOTE: Do not inline this function, as (*sys_rdb) is already inline!
+****************************************************************************/
+u8 fetch_byte_imm(void)
+{
+ u8 fetched;
+
+DB( if (CHECK_IP_FETCH())
+ x86emu_check_ip_access();)
+ fetched = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
+ INC_DECODED_INST_LEN(1);
+ return fetched;
+}
+
+/****************************************************************************
+RETURNS:
+Immediate word value read from instruction queue
+
+REMARKS:
+This function returns the immediate byte from the instruction queue, and
+moves the instruction pointer to the next value.
+
+NOTE: Do not inline this function, as (*sys_rdw) is already inline!
+****************************************************************************/
+u16 fetch_word_imm(void)
+{
+ u16 fetched;
+
+DB( if (CHECK_IP_FETCH())
+ x86emu_check_ip_access();)
+ fetched = (*sys_rdw)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
+ M.x86.R_IP += 2;
+ INC_DECODED_INST_LEN(2);
+ return fetched;
+}
+
+/****************************************************************************
+RETURNS:
+Immediate lone value read from instruction queue
+
+REMARKS:
+This function returns the immediate byte from the instruction queue, and
+moves the instruction pointer to the next value.
+
+NOTE: Do not inline this function, as (*sys_rdw) is already inline!
+****************************************************************************/
+u32 fetch_long_imm(void)
+{
+ u32 fetched;
+
+DB( if (CHECK_IP_FETCH())
+ x86emu_check_ip_access();)
+ fetched = (*sys_rdl)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP));
+ M.x86.R_IP += 4;
+ INC_DECODED_INST_LEN(4);
+ return fetched;
+}
+
+/****************************************************************************
+RETURNS:
+Value of the default data segment
+
+REMARKS:
+Inline function that returns the default data segment for the current
+instruction.
+
+On the x86 processor, the default segment is not always DS if there is
+no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to
+addresses relative to SS (ie: on the stack). So, at the minimum, all
+decodings of addressing modes would have to set/clear a bit describing
+whether the access is relative to DS or SS. That is the function of the
+cpu-state-varible M.x86.mode. There are several potential states:
+
+ repe prefix seen (handled elsewhere)
+ repne prefix seen (ditto)
+
+ cs segment override
+ ds segment override
+ es segment override
+ fs segment override
+ gs segment override
+ ss segment override
+
+ ds/ss select (in absense of override)
+
+Each of the above 7 items are handled with a bit in the mode field.
+****************************************************************************/
+_INLINE u32 get_data_segment(void)
+{
+#define GET_SEGMENT(segment)
+ switch (M.x86.mode & SYSMODE_SEGMASK) {
+ case 0: /* default case: use ds register */
+ case SYSMODE_SEGOVR_DS:
+ case SYSMODE_SEGOVR_DS | SYSMODE_SEG_DS_SS:
+ return M.x86.R_DS;
+ case SYSMODE_SEG_DS_SS: /* non-overridden, use ss register */
+ return M.x86.R_SS;
+ case SYSMODE_SEGOVR_CS:
+ case SYSMODE_SEGOVR_CS | SYSMODE_SEG_DS_SS:
+ return M.x86.R_CS;
+ case SYSMODE_SEGOVR_ES:
+ case SYSMODE_SEGOVR_ES | SYSMODE_SEG_DS_SS:
+ return M.x86.R_ES;
+ case SYSMODE_SEGOVR_FS:
+ case SYSMODE_SEGOVR_FS | SYSMODE_SEG_DS_SS:
+ return M.x86.R_FS;
+ case SYSMODE_SEGOVR_GS:
+ case SYSMODE_SEGOVR_GS | SYSMODE_SEG_DS_SS:
+ return M.x86.R_GS;
+ case SYSMODE_SEGOVR_SS:
+ case SYSMODE_SEGOVR_SS | SYSMODE_SEG_DS_SS:
+ return M.x86.R_SS;
+ default:
+#ifdef DEBUG
+ printk("error: should not happen: multiple overrides.\n");
+#endif
+ HALT_SYS();
+ return 0;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to load data from
+
+RETURNS:
+Byte value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u8 fetch_data_byte(
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ return (*sys_rdb)((get_data_segment() << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to load data from
+
+RETURNS:
+Word value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u16 fetch_data_word(
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ return (*sys_rdw)((get_data_segment() << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to load data from
+
+RETURNS:
+Long value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u32 fetch_data_long(
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ return (*sys_rdl)((get_data_segment() << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to load data from
+offset - Offset to load data from
+
+RETURNS:
+Byte value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u8 fetch_data_byte_abs(
+ uint segment,
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ return (*sys_rdb)(((u32)segment << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to load data from
+offset - Offset to load data from
+
+RETURNS:
+Word value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u16 fetch_data_word_abs(
+ uint segment,
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ return (*sys_rdw)(((u32)segment << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to load data from
+offset - Offset to load data from
+
+RETURNS:
+Long value read from the absolute memory location.
+
+NOTE: Do not inline this function as (*sys_rdX) is already inline!
+****************************************************************************/
+u32 fetch_data_long_abs(
+ uint segment,
+ uint offset)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ return (*sys_rdl)(((u32)segment << 4) + offset);
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a word value to an segmented memory location. The segment used is
+the current 'default' segment, which may have been overridden.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_byte(
+ uint offset,
+ u8 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ (*sys_wrb)((get_data_segment() << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a word value to an segmented memory location. The segment used is
+the current 'default' segment, which may have been overridden.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_word(
+ uint offset,
+ u16 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ (*sys_wrw)((get_data_segment() << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a long value to an segmented memory location. The segment used is
+the current 'default' segment, which may have been overridden.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_long(
+ uint offset,
+ u32 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access((u16)get_data_segment(), offset);
+#endif
+ (*sys_wrl)((get_data_segment() << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to store data at
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a byte value to an absolute memory location.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_byte_abs(
+ uint segment,
+ uint offset,
+ u8 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ (*sys_wrb)(((u32)segment << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to store data at
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a word value to an absolute memory location.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_word_abs(
+ uint segment,
+ uint offset,
+ u16 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ (*sys_wrw)(((u32)segment << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+segment - Segment to store data at
+offset - Offset to store data at
+val - Value to store
+
+REMARKS:
+Writes a long value to an absolute memory location.
+
+NOTE: Do not inline this function as (*sys_wrX) is already inline!
+****************************************************************************/
+void store_data_long_abs(
+ uint segment,
+ uint offset,
+ u32 val)
+{
+#ifdef DEBUG
+ if (CHECK_DATA_ACCESS())
+ x86emu_check_data_access(segment, offset);
+#endif
+ (*sys_wrl)(((u32)segment << 4) + offset, val);
+}
+
+/****************************************************************************
+PARAMETERS:
+reg - Register to decode
+
+RETURNS:
+Pointer to the appropriate register
+
+REMARKS:
+Return a pointer to the register given by the R/RM field of the
+modrm byte, for byte operands. Also enables the decoding of instructions.
+****************************************************************************/
+u8* decode_rm_byte_register(
+ int reg)
+{
+ switch (reg) {
+ case 0:
+ DECODE_PRINTF("AL");
+ return &M.x86.R_AL;
+ case 1:
+ DECODE_PRINTF("CL");
+ return &M.x86.R_CL;
+ case 2:
+ DECODE_PRINTF("DL");
+ return &M.x86.R_DL;
+ case 3:
+ DECODE_PRINTF("BL");
+ return &M.x86.R_BL;
+ case 4:
+ DECODE_PRINTF("AH");
+ return &M.x86.R_AH;
+ case 5:
+ DECODE_PRINTF("CH");
+ return &M.x86.R_CH;
+ case 6:
+ DECODE_PRINTF("DH");
+ return &M.x86.R_DH;
+ case 7:
+ DECODE_PRINTF("BH");
+ return &M.x86.R_BH;
+ }
+ HALT_SYS();
+ return NULL; /* NOT REACHED OR REACHED ON ERROR */
+}
+
+/****************************************************************************
+PARAMETERS:
+reg - Register to decode
+
+RETURNS:
+Pointer to the appropriate register
+
+REMARKS:
+Return a pointer to the register given by the R/RM field of the
+modrm byte, for word operands. Also enables the decoding of instructions.
+****************************************************************************/
+u16* decode_rm_word_register(
+ int reg)
+{
+ switch (reg) {
+ case 0:
+ DECODE_PRINTF("AX");
+ return &M.x86.R_AX;
+ case 1:
+ DECODE_PRINTF("CX");
+ return &M.x86.R_CX;
+ case 2:
+ DECODE_PRINTF("DX");
+ return &M.x86.R_DX;
+ case 3:
+ DECODE_PRINTF("BX");
+ return &M.x86.R_BX;
+ case 4:
+ DECODE_PRINTF("SP");
+ return &M.x86.R_SP;
+ case 5:
+ DECODE_PRINTF("BP");
+ return &M.x86.R_BP;
+ case 6:
+ DECODE_PRINTF("SI");
+ return &M.x86.R_SI;
+ case 7:
+ DECODE_PRINTF("DI");
+ return &M.x86.R_DI;
+ }
+ HALT_SYS();
+ return NULL; /* NOTREACHED OR REACHED ON ERROR */
+}
+
+/****************************************************************************
+PARAMETERS:
+reg - Register to decode
+
+RETURNS:
+Pointer to the appropriate register
+
+REMARKS:
+Return a pointer to the register given by the R/RM field of the
+modrm byte, for dword operands. Also enables the decoding of instructions.
+****************************************************************************/
+u32* decode_rm_long_register(
+ int reg)
+{
+ switch (reg) {
+ case 0:
+ DECODE_PRINTF("EAX");
+ return &M.x86.R_EAX;
+ case 1:
+ DECODE_PRINTF("ECX");
+ return &M.x86.R_ECX;
+ case 2:
+ DECODE_PRINTF("EDX");
+ return &M.x86.R_EDX;
+ case 3:
+ DECODE_PRINTF("EBX");
+ return &M.x86.R_EBX;
+ case 4:
+ DECODE_PRINTF("ESP");
+ return &M.x86.R_ESP;
+ case 5:
+ DECODE_PRINTF("EBP");
+ return &M.x86.R_EBP;
+ case 6:
+ DECODE_PRINTF("ESI");
+ return &M.x86.R_ESI;
+ case 7:
+ DECODE_PRINTF("EDI");
+ return &M.x86.R_EDI;
+ }
+ HALT_SYS();
+ return NULL; /* NOTREACHED OR REACHED ON ERROR */
+}
+
+/****************************************************************************
+PARAMETERS:
+reg - Register to decode
+
+RETURNS:
+Pointer to the appropriate register
+
+REMARKS:
+Return a pointer to the register given by the R/RM field of the
+modrm byte, for word operands, modified from above for the weirdo
+special case of segreg operands. Also enables the decoding of instructions.
+****************************************************************************/
+u16* decode_rm_seg_register(
+ int reg)
+{
+ switch (reg) {
+ case 0:
+ DECODE_PRINTF("ES");
+ return &M.x86.R_ES;
+ case 1:
+ DECODE_PRINTF("CS");
+ return &M.x86.R_CS;
+ case 2:
+ DECODE_PRINTF("SS");
+ return &M.x86.R_SS;
+ case 3:
+ DECODE_PRINTF("DS");
+ return &M.x86.R_DS;
+ case 4:
+ DECODE_PRINTF("FS");
+ return &M.x86.R_FS;
+ case 5:
+ DECODE_PRINTF("GS");
+ return &M.x86.R_GS;
+ case 6:
+ case 7:
+ DECODE_PRINTF("ILLEGAL SEGREG");
+ break;
+ }
+ HALT_SYS();
+ return NULL; /* NOT REACHED OR REACHED ON ERROR */
+}
+
+/****************************************************************************
+PARAMETERS:
+scale - scale value of SIB byte
+index - index value of SIB byte
+
+RETURNS:
+Value of scale * index
+
+REMARKS:
+Decodes scale/index of SIB byte and returns relevant offset part of
+effective address.
+****************************************************************************/
+unsigned decode_sib_si(
+ int scale,
+ int index)
+{
+ scale = 1 << scale;
+ if (scale > 1) {
+ DECODE_PRINTF2("[%d*", scale);
+ } else {
+ DECODE_PRINTF("[");
+ }
+ switch (index) {
+ case 0:
+ DECODE_PRINTF("EAX]");
+ return M.x86.R_EAX * index;
+ case 1:
+ DECODE_PRINTF("ECX]");
+ return M.x86.R_ECX * index;
+ case 2:
+ DECODE_PRINTF("EDX]");
+ return M.x86.R_EDX * index;
+ case 3:
+ DECODE_PRINTF("EBX]");
+ return M.x86.R_EBX * index;
+ case 4:
+ DECODE_PRINTF("0]");
+ return 0;
+ case 5:
+ DECODE_PRINTF("EBP]");
+ return M.x86.R_EBP * index;
+ case 6:
+ DECODE_PRINTF("ESI]");
+ return M.x86.R_ESI * index;
+ case 7:
+ DECODE_PRINTF("EDI]");
+ return M.x86.R_EDI * index;
+ }
+ HALT_SYS();
+ return 0; /* NOT REACHED OR REACHED ON ERROR */
+}
+
+/****************************************************************************
+PARAMETERS:
+mod - MOD value of preceding ModR/M byte
+
+RETURNS:
+Offset in memory for the address decoding
+
+REMARKS:
+Decodes SIB addressing byte and returns calculated effective address.
+****************************************************************************/
+unsigned decode_sib_address(
+ int mod)
+{
+ int sib = fetch_byte_imm();
+ int ss = (sib >> 6) & 0x03;
+ int index = (sib >> 3) & 0x07;
+ int base = sib & 0x07;
+ int offset = 0;
+ int displacement;
+
+ switch (base) {
+ case 0:
+ DECODE_PRINTF("[EAX]");
+ offset = M.x86.R_EAX;
+ break;
+ case 1:
+ DECODE_PRINTF("[ECX]");
+ offset = M.x86.R_ECX;
+ break;
+ case 2:
+ DECODE_PRINTF("[EDX]");
+ offset = M.x86.R_EDX;
+ break;
+ case 3:
+ DECODE_PRINTF("[EBX]");
+ offset = M.x86.R_EBX;
+ break;
+ case 4:
+ DECODE_PRINTF("[ESP]");
+ offset = M.x86.R_ESP;
+ break;
+ case 5:
+ switch (mod) {
+ case 0:
+ displacement = (s32)fetch_long_imm();
+ DECODE_PRINTF2("[%d]", displacement);
+ offset = displacement;
+ break;
+ case 1:
+ displacement = (s8)fetch_byte_imm();
+ DECODE_PRINTF2("[%d][EBP]", displacement);
+ offset = M.x86.R_EBP + displacement;
+ break;
+ case 2:
+ displacement = (s32)fetch_long_imm();
+ DECODE_PRINTF2("[%d][EBP]", displacement);
+ offset = M.x86.R_EBP + displacement;
+ break;
+ default:
+ HALT_SYS();
+ }
+ DECODE_PRINTF("[EAX]");
+ offset = M.x86.R_EAX;
+ break;
+ case 6:
+ DECODE_PRINTF("[ESI]");
+ offset = M.x86.R_ESI;
+ break;
+ case 7:
+ DECODE_PRINTF("[EDI]");
+ offset = M.x86.R_EDI;
+ break;
+ default:
+ HALT_SYS();
+ }
+ offset += decode_sib_si(ss, index);
+ return offset;
+
+}
+
+/****************************************************************************
+PARAMETERS:
+rm - RM value to decode
+
+RETURNS:
+Offset in memory for the address decoding
+
+REMARKS:
+Return the offset given by mod=00 addressing. Also enables the
+decoding of instructions.
+
+NOTE: The code which specifies the corresponding segment (ds vs ss)
+ below in the case of [BP+..]. The assumption here is that at the
+ point that this subroutine is called, the bit corresponding to
+ SYSMODE_SEG_DS_SS will be zero. After every instruction
+ except the segment override instructions, this bit (as well
+ as any bits indicating segment overrides) will be clear. So
+ if a SS access is needed, set this bit. Otherwise, DS access
+ occurs (unless any of the segment override bits are set).
+****************************************************************************/
+unsigned decode_rm00_address(
+ int rm)
+{
+ unsigned offset;
+
+ if (M.x86.mode & SYSMODE_PREFIX_ADDR) {
+ /* 32-bit addressing */
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF("[EAX]");
+ return M.x86.R_EAX;
+ case 1:
+ DECODE_PRINTF("[ECX]");
+ return M.x86.R_ECX;
+ case 2:
+ DECODE_PRINTF("[EDX]");
+ return M.x86.R_EDX;
+ case 3:
+ DECODE_PRINTF("[EBX]");
+ return M.x86.R_EBX;
+ case 4:
+ return decode_sib_address(0);
+ case 5:
+ offset = fetch_long_imm();
+ DECODE_PRINTF2("[%08x]", offset);
+ return offset;
+ case 6:
+ DECODE_PRINTF("[ESI]");
+ return M.x86.R_ESI;
+ case 7:
+ DECODE_PRINTF("[EDI]");
+ return M.x86.R_EDI;
+ }
+ } else {
+ /* 16-bit addressing */
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF("[BX+SI]");
+ return (M.x86.R_BX + M.x86.R_SI) & 0xffff;
+ case 1:
+ DECODE_PRINTF("[BX+DI]");
+ return (M.x86.R_BX + M.x86.R_DI) & 0xffff;
+ case 2:
+ DECODE_PRINTF("[BP+SI]");
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_SI) & 0xffff;
+ case 3:
+ DECODE_PRINTF("[BP+DI]");
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_DI) & 0xffff;
+ case 4:
+ DECODE_PRINTF("[SI]");
+ return M.x86.R_SI;
+ case 5:
+ DECODE_PRINTF("[DI]");
+ return M.x86.R_DI;
+ case 6:
+ offset = fetch_word_imm();
+ DECODE_PRINTF2("[%04x]", offset);
+ return offset;
+ case 7:
+ DECODE_PRINTF("[BX]");
+ return M.x86.R_BX;
+ }
+ }
+ HALT_SYS();
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+rm - RM value to decode
+
+RETURNS:
+Offset in memory for the address decoding
+
+REMARKS:
+Return the offset given by mod=01 addressing. Also enables the
+decoding of instructions.
+****************************************************************************/
+unsigned decode_rm01_address(
+ int rm)
+{
+ int displacement;
+
+ if (M.x86.mode & SYSMODE_PREFIX_ADDR) {
+ /* 32-bit addressing */
+ if (rm != 4)
+ displacement = (s8)fetch_byte_imm();
+ else
+ displacement = 0;
+
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF2("%d[EAX]", displacement);
+ return M.x86.R_EAX + displacement;
+ case 1:
+ DECODE_PRINTF2("%d[ECX]", displacement);
+ return M.x86.R_ECX + displacement;
+ case 2:
+ DECODE_PRINTF2("%d[EDX]", displacement);
+ return M.x86.R_EDX + displacement;
+ case 3:
+ DECODE_PRINTF2("%d[EBX]", displacement);
+ return M.x86.R_EBX + displacement;
+ case 4: {
+ int offset = decode_sib_address(1);
+ displacement = (s8)fetch_byte_imm();
+ DECODE_PRINTF2("[%d]", displacement);
+ return offset + displacement;
+ }
+ case 5:
+ DECODE_PRINTF2("%d[EBP]", displacement);
+ return M.x86.R_EBP + displacement;
+ case 6:
+ DECODE_PRINTF2("%d[ESI]", displacement);
+ return M.x86.R_ESI + displacement;
+ case 7:
+ DECODE_PRINTF2("%d[EDI]", displacement);
+ return M.x86.R_EDI + displacement;
+ }
+ } else {
+ /* 16-bit addressing */
+ displacement = (s8)fetch_byte_imm();
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF2("%d[BX+SI]", displacement);
+ return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff;
+ case 1:
+ DECODE_PRINTF2("%d[BX+DI]", displacement);
+ return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff;
+ case 2:
+ DECODE_PRINTF2("%d[BP+SI]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff;
+ case 3:
+ DECODE_PRINTF2("%d[BP+DI]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff;
+ case 4:
+ DECODE_PRINTF2("%d[SI]", displacement);
+ return (M.x86.R_SI + displacement) & 0xffff;
+ case 5:
+ DECODE_PRINTF2("%d[DI]", displacement);
+ return (M.x86.R_DI + displacement) & 0xffff;
+ case 6:
+ DECODE_PRINTF2("%d[BP]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + displacement) & 0xffff;
+ case 7:
+ DECODE_PRINTF2("%d[BX]", displacement);
+ return (M.x86.R_BX + displacement) & 0xffff;
+ }
+ }
+ HALT_SYS();
+ return 0; /* SHOULD NOT HAPPEN */
+}
+
+/****************************************************************************
+PARAMETERS:
+rm - RM value to decode
+
+RETURNS:
+Offset in memory for the address decoding
+
+REMARKS:
+Return the offset given by mod=10 addressing. Also enables the
+decoding of instructions.
+****************************************************************************/
+unsigned decode_rm10_address(
+ int rm)
+{
+ if (M.x86.mode & SYSMODE_PREFIX_ADDR) {
+ int displacement;
+
+ /* 32-bit addressing */
+ if (rm != 4)
+ displacement = (s32)fetch_long_imm();
+ else
+ displacement = 0;
+
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF2("%d[EAX]", displacement);
+ return M.x86.R_EAX + displacement;
+ case 1:
+ DECODE_PRINTF2("%d[ECX]", displacement);
+ return M.x86.R_ECX + displacement;
+ case 2:
+ DECODE_PRINTF2("%d[EDX]", displacement);
+ return M.x86.R_EDX + displacement;
+ case 3:
+ DECODE_PRINTF2("%d[EBX]", displacement);
+ return M.x86.R_EBX + displacement;
+ case 4: {
+ int offset = decode_sib_address(2);
+ displacement = (s32)fetch_long_imm();
+ DECODE_PRINTF2("[%d]", displacement);
+ return offset + displacement;
+ }
+ case 5:
+ DECODE_PRINTF2("%d[EBP]", displacement);
+ return M.x86.R_EBP + displacement;
+ case 6:
+ DECODE_PRINTF2("%d[ESI]", displacement);
+ return M.x86.R_ESI + displacement;
+ case 7:
+ DECODE_PRINTF2("%d[EDI]", displacement);
+ return M.x86.R_EDI + displacement;
+ }
+ } else {
+ int displacement = (s16)fetch_word_imm();
+
+ /* 16-bit addressing */
+ switch (rm) {
+ case 0:
+ DECODE_PRINTF2("%d[BX+SI]", displacement);
+ return (M.x86.R_BX + M.x86.R_SI + displacement) & 0xffff;
+ case 1:
+ DECODE_PRINTF2("%d[BX+DI]", displacement);
+ return (M.x86.R_BX + M.x86.R_DI + displacement) & 0xffff;
+ case 2:
+ DECODE_PRINTF2("%d[BP+SI]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_SI + displacement) & 0xffff;
+ case 3:
+ DECODE_PRINTF2("%d[BP+DI]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + M.x86.R_DI + displacement) & 0xffff;
+ case 4:
+ DECODE_PRINTF2("%d[SI]", displacement);
+ return (M.x86.R_SI + displacement) & 0xffff;
+ case 5:
+ DECODE_PRINTF2("%d[DI]", displacement);
+ return (M.x86.R_DI + displacement) & 0xffff;
+ case 6:
+ DECODE_PRINTF2("%d[BP]", displacement);
+ M.x86.mode |= SYSMODE_SEG_DS_SS;
+ return (M.x86.R_BP + displacement) & 0xffff;
+ case 7:
+ DECODE_PRINTF2("%d[BX]", displacement);
+ return (M.x86.R_BX + displacement) & 0xffff;
+ }
+ }
+ HALT_SYS();
+ return 0; /* SHOULD NOT HAPPEN */
+}
+
+
+/****************************************************************************
+PARAMETERS:
+mod - modifier
+rm - RM value to decode
+
+RETURNS:
+Offset in memory for the address decoding, multiplexing calls to
+the decode_rmXX_address functions
+
+REMARKS:
+Return the offset given by "mod" addressing.
+****************************************************************************/
+
+unsigned decode_rmXX_address(int mod, int rm)
+{
+ if(mod == 0)
+ return decode_rm00_address(rm);
+ if(mod == 1)
+ return decode_rm01_address(rm);
+ return decode_rm10_address(rm);
+}
+
+
+
diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c
new file mode 100644
index 0000000..632979d
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/ops.c
@@ -0,0 +1,5431 @@
+/****************************************************************************
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file includes subroutines to implement the decoding
+* and emulation of all the x86 processor instructions.
+*
+* There are approximately 250 subroutines in here, which correspond
+* to the 256 byte-"opcodes" found on the 8086. The table which
+* dispatches this is found in the files optab.[ch].
+*
+* Each opcode proc has a comment preceeding it which gives it's table
+* address. Several opcodes are missing (undefined) in the table.
+*
+* Each proc includes information for decoding (DECODE_PRINTF and
+* DECODE_PRINTF2), debugging (TRACE_REGS, SINGLE_STEP), and misc
+* functions (START_OF_INSTR, END_OF_INSTR).
+*
+* Many of the procedures are *VERY* similar in coding. This has
+* allowed for a very large amount of code to be generated in a fairly
+* short amount of time (i.e. cut, paste, and modify). The result is
+* that much of the code below could have been folded into subroutines
+* for a large reduction in size of this file. The downside would be
+* that there would be a penalty in execution speed. The file could
+* also have been *MUCH* larger by inlining certain functions which
+* were called. This could have resulted even faster execution. The
+* prime directive I used to decide whether to inline the code or to
+* modularize it, was basically: 1) no unnecessary subroutine calls,
+* 2) no routines more than about 200 lines in size, and 3) modularize
+* any code that I might not get right the first time. The fetch_*
+* subroutines fall into the latter category. The The decode_* fall
+* into the second category. The coding of the "switch(mod){ .... }"
+* in many of the subroutines below falls into the first category.
+* Especially, the coding of {add,and,or,sub,...}_{byte,word}
+* subroutines are an especially glaring case of the third guideline.
+* Since so much of the code is cloned from other modules (compare
+* opcode #00 to opcode #01), making the basic operations subroutine
+* calls is especially important; otherwise mistakes in coding an
+* "add" would represent a nightmare in maintenance.
+*
+* Jason ported this file to u-boot. place all the function pointer in
+* the got2 sector. Removed some opcode.
+*
+****************************************************************************/
+
+#include "x86emu/x86emui.h"
+/*----------------------------- Implementation ----------------------------*/
+
+/* constant arrays to do several instructions in just one function */
+
+#ifdef DEBUG
+static char *x86emu_GenOpName[8] = {
+ "ADD", "OR", "ADC", "SBB", "AND", "SUB", "XOR", "CMP"};
+#endif
+
+/* used by several opcodes */
+static u8 (*genop_byte_operation[])(u8 d, u8 s) __attribute__ ((section(".got2"))) =
+{
+ add_byte, /* 00 */
+ or_byte, /* 01 */
+ adc_byte, /* 02 */
+ sbb_byte, /* 03 */
+ and_byte, /* 04 */
+ sub_byte, /* 05 */
+ xor_byte, /* 06 */
+ cmp_byte, /* 07 */
+};
+
+static u16 (*genop_word_operation[])(u16 d, u16 s) __attribute__ ((section(".got2"))) =
+{
+ add_word, /*00 */
+ or_word, /*01 */
+ adc_word, /*02 */
+ sbb_word, /*03 */
+ and_word, /*04 */
+ sub_word, /*05 */
+ xor_word, /*06 */
+ cmp_word, /*07 */
+};
+
+static u32 (*genop_long_operation[])(u32 d, u32 s) __attribute__ ((section(".got2"))) =
+{
+ add_long, /*00 */
+ or_long, /*01 */
+ adc_long, /*02 */
+ sbb_long, /*03 */
+ and_long, /*04 */
+ sub_long, /*05 */
+ xor_long, /*06 */
+ cmp_long, /*07 */
+};
+
+/* used by opcodes 80, c0, d0, and d2. */
+static u8(*opcD0_byte_operation[])(u8 d, u8 s) __attribute__ ((section(".got2"))) =
+{
+ rol_byte,
+ ror_byte,
+ rcl_byte,
+ rcr_byte,
+ shl_byte,
+ shr_byte,
+ shl_byte, /* sal_byte === shl_byte by definition */
+ sar_byte,
+};
+
+/* used by opcodes c1, d1, and d3. */
+static u16(*opcD1_word_operation[])(u16 s, u8 d) __attribute__ ((section(".got2"))) =
+{
+ rol_word,
+ ror_word,
+ rcl_word,
+ rcr_word,
+ shl_word,
+ shr_word,
+ shl_word, /* sal_byte === shl_byte by definition */
+ sar_word,
+};
+
+/* used by opcodes c1, d1, and d3. */
+static u32 (*opcD1_long_operation[])(u32 s, u8 d) __attribute__ ((section(".got2"))) =
+{
+ rol_long,
+ ror_long,
+ rcl_long,
+ rcr_long,
+ shl_long,
+ shr_long,
+ shl_long, /* sal_byte === shl_byte by definition */
+ sar_long,
+};
+
+#ifdef DEBUG
+
+static char *opF6_names[8] =
+ { "TEST\t", "", "NOT\t", "NEG\t", "MUL\t", "IMUL\t", "DIV\t", "IDIV\t" };
+
+#endif
+
+/****************************************************************************
+PARAMETERS:
+op1 - Instruction op code
+
+REMARKS:
+Handles illegal opcodes.
+****************************************************************************/
+void x86emuOp_illegal_op(
+ u8 op1)
+{
+ START_OF_INSTR();
+ if (M.x86.R_SP != 0) {
+ DECODE_PRINTF("ILLEGAL X86 OPCODE\n");
+ TRACE_REGS();
+ DB( printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n",
+ M.x86.R_CS, M.x86.R_IP-1,op1));
+ HALT_SYS();
+ }
+ else {
+ /* If we get here, it means the stack pointer is back to zero
+ * so we are just returning from an emulator service call
+ * so therte is no need to display an error message. We trap
+ * the emulator with an 0xF1 opcode to finish the service
+ * call.
+ */
+ X86EMU_halt_sys();
+ }
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x00, 0x08, 0x10, 0x18, 0x20, 0x28, 0x30, 0x38
+****************************************************************************/
+void x86emuOp_genop_byte_RM_R(u8 op1)
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 *destreg, *srcreg;
+ u8 destval;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if(mod<3)
+ { destoffset = decode_rmXX_address(mod,rl);
+ DECODE_PRINTF(",");
+ destval = fetch_data_byte(destoffset);
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = genop_byte_operation[op1](destval, *srcreg);
+ store_data_byte(destoffset, destval);
+ }
+ else
+ { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_byte_operation[op1](*destreg, *srcreg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x01, 0x09, 0x11, 0x19, 0x21, 0x29, 0x31, 0x39
+****************************************************************************/
+void x86emuOp_genop_word_RM_R(u8 op1)
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+
+ if(mod<3) {
+ destoffset = decode_rmXX_address(mod,rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *srcreg;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_long(destoffset);
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = genop_long_operation[op1](destval, *srcreg);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+ u16 *srcreg;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_word(destoffset);
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = genop_word_operation[op1](destval, *srcreg);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_long_operation[op1](*destreg, *srcreg);
+ } else {
+ u16 *destreg,*srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_word_operation[op1](*destreg, *srcreg);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x02, 0x0a, 0x12, 0x1a, 0x22, 0x2a, 0x32, 0x3a
+****************************************************************************/
+void x86emuOp_genop_byte_R_RM(u8 op1)
+{
+ int mod, rl, rh;
+ u8 *destreg, *srcreg;
+ uint srcoffset;
+ u8 srcval;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod,rl);
+ srcval = fetch_data_byte(srcoffset);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ srcval = *srcreg;
+ }
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_byte_operation[op1](*destreg, srcval);
+
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x03, 0x0b, 0x13, 0x1b, 0x23, 0x2b, 0x33, 0x3b
+****************************************************************************/
+void x86emuOp_genop_word_R_RM(u8 op1)
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ u32 *destreg32, srcval;
+ u16 *destreg;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod,rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ destreg32 = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_long(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg32 = genop_long_operation[op1](*destreg32, srcval);
+ } else {
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_word(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_word_operation[op1](*destreg, srcval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg;
+ destreg32 = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg32 = genop_long_operation[op1](*destreg32, *srcreg);
+ } else {
+ u16 *srcreg;
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = genop_word_operation[op1](*destreg, *srcreg);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x04, 0x0c, 0x14, 0x1c, 0x24, 0x2c, 0x34, 0x3c
+****************************************************************************/
+void x86emuOp_genop_byte_AL_IMM(u8 op1)
+{
+ u8 srcval;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\tAL,");
+ srcval = fetch_byte_imm();
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ M.x86.R_AL = genop_byte_operation[op1](M.x86.R_AL, srcval);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcodes 0x05, 0x0d, 0x15, 0x1d, 0x25, 0x2d, 0x35, 0x3d
+****************************************************************************/
+void x86emuOp_genop_word_AX_IMM(u8 op1)
+{
+ u32 srcval;
+
+ op1 = (op1 >> 3) & 0x7;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\tEAX,");
+ srcval = fetch_long_imm();
+ } else {
+ DECODE_PRINTF(x86emu_GenOpName[op1]);
+ DECODE_PRINTF("\tAX,");
+ srcval = fetch_word_imm();
+ }
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EAX = genop_long_operation[op1](M.x86.R_EAX, srcval);
+ } else {
+ M.x86.R_AX = genop_word_operation[op1](M.x86.R_AX, (u16)srcval);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x06
+****************************************************************************/
+void x86emuOp_push_ES(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tES\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_ES);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x07
+****************************************************************************/
+void x86emuOp_pop_ES(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\tES\n");
+ TRACE_AND_STEP();
+ M.x86.R_ES = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0e
+****************************************************************************/
+void x86emuOp_push_CS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tCS\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_CS);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f. Escape for two-byte opcode (286 or better)
+****************************************************************************/
+void x86emuOp_two_byte(u8 X86EMU_UNUSED(op1))
+{
+ u8 op2 = (*sys_rdb)(((u32)M.x86.R_CS << 4) + (M.x86.R_IP++));
+ INC_DECODED_INST_LEN(1);
+ (*x86emu_optab2[op2])(op2);
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x16
+****************************************************************************/
+void x86emuOp_push_SS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tSS\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_SS);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x17
+****************************************************************************/
+void x86emuOp_pop_SS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\tSS\n");
+ TRACE_AND_STEP();
+ M.x86.R_SS = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x1e
+****************************************************************************/
+void x86emuOp_push_DS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tDS\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_DS);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x1f
+****************************************************************************/
+void x86emuOp_pop_DS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\tDS\n");
+ TRACE_AND_STEP();
+ M.x86.R_DS = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x26
+****************************************************************************/
+void x86emuOp_segovr_ES(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("ES:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_ES;
+ /*
+ * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
+ * opcode subroutines we do not want to do this.
+ */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x27
+****************************************************************************/
+void x86emuOp_daa(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("DAA\n");
+ TRACE_AND_STEP();
+ M.x86.R_AL = daa_byte(M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x2e
+****************************************************************************/
+void x86emuOp_segovr_CS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("CS:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_CS;
+ /* note no DECODE_CLEAR_SEGOVR here. */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x2f
+****************************************************************************/
+void x86emuOp_das(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("DAS\n");
+ TRACE_AND_STEP();
+ M.x86.R_AL = das_byte(M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x36
+****************************************************************************/
+void x86emuOp_segovr_SS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("SS:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_SS;
+ /* no DECODE_CLEAR_SEGOVR ! */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x37
+****************************************************************************/
+void x86emuOp_aaa(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("AAA\n");
+ TRACE_AND_STEP();
+ M.x86.R_AX = aaa_word(M.x86.R_AX);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x3e
+****************************************************************************/
+void x86emuOp_segovr_DS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("DS:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_DS;
+ /* NO DECODE_CLEAR_SEGOVR! */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x3f
+****************************************************************************/
+void x86emuOp_aas(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("AAS\n");
+ TRACE_AND_STEP();
+ M.x86.R_AX = aas_word(M.x86.R_AX);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x40 - 0x47
+****************************************************************************/
+void x86emuOp_inc_register(u8 op1)
+{
+ START_OF_INSTR();
+ op1 &= 0x7;
+ DECODE_PRINTF("INC\t");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg;
+ reg = DECODE_RM_LONG_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = inc_long(*reg);
+ } else {
+ u16 *reg;
+ reg = DECODE_RM_WORD_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = inc_word(*reg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x48 - 0x4F
+****************************************************************************/
+void x86emuOp_dec_register(u8 op1)
+{
+ START_OF_INSTR();
+ op1 &= 0x7;
+ DECODE_PRINTF("DEC\t");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg;
+ reg = DECODE_RM_LONG_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = dec_long(*reg);
+ } else {
+ u16 *reg;
+ reg = DECODE_RM_WORD_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = dec_word(*reg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x50 - 0x57
+****************************************************************************/
+void x86emuOp_push_register(u8 op1)
+{
+ START_OF_INSTR();
+ op1 &= 0x7;
+ DECODE_PRINTF("PUSH\t");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg;
+ reg = DECODE_RM_LONG_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ push_long(*reg);
+ } else {
+ u16 *reg;
+ reg = DECODE_RM_WORD_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ push_word(*reg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x58 - 0x5F
+****************************************************************************/
+void x86emuOp_pop_register(u8 op1)
+{
+ START_OF_INSTR();
+ op1 &= 0x7;
+ DECODE_PRINTF("POP\t");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg;
+ reg = DECODE_RM_LONG_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = pop_long();
+ } else {
+ u16 *reg;
+ reg = DECODE_RM_WORD_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *reg = pop_word();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x60
+****************************************************************************/
+void x86emuOp_push_all(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("PUSHAD\n");
+ } else {
+ DECODE_PRINTF("PUSHA\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 old_sp = M.x86.R_ESP;
+
+ push_long(M.x86.R_EAX);
+ push_long(M.x86.R_ECX);
+ push_long(M.x86.R_EDX);
+ push_long(M.x86.R_EBX);
+ push_long(old_sp);
+ push_long(M.x86.R_EBP);
+ push_long(M.x86.R_ESI);
+ push_long(M.x86.R_EDI);
+ } else {
+ u16 old_sp = M.x86.R_SP;
+
+ push_word(M.x86.R_AX);
+ push_word(M.x86.R_CX);
+ push_word(M.x86.R_DX);
+ push_word(M.x86.R_BX);
+ push_word(old_sp);
+ push_word(M.x86.R_BP);
+ push_word(M.x86.R_SI);
+ push_word(M.x86.R_DI);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x61
+****************************************************************************/
+void x86emuOp_pop_all(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("POPAD\n");
+ } else {
+ DECODE_PRINTF("POPA\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EDI = pop_long();
+ M.x86.R_ESI = pop_long();
+ M.x86.R_EBP = pop_long();
+ M.x86.R_ESP += 4; /* skip ESP */
+ M.x86.R_EBX = pop_long();
+ M.x86.R_EDX = pop_long();
+ M.x86.R_ECX = pop_long();
+ M.x86.R_EAX = pop_long();
+ } else {
+ M.x86.R_DI = pop_word();
+ M.x86.R_SI = pop_word();
+ M.x86.R_BP = pop_word();
+ M.x86.R_SP += 2; /* skip SP */
+ M.x86.R_BX = pop_word();
+ M.x86.R_DX = pop_word();
+ M.x86.R_CX = pop_word();
+ M.x86.R_AX = pop_word();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/*opcode 0x62 ILLEGAL OP, calls x86emuOp_illegal_op() */
+/*opcode 0x63 ILLEGAL OP, calls x86emuOp_illegal_op() */
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x64
+****************************************************************************/
+void x86emuOp_segovr_FS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("FS:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_FS;
+ /*
+ * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
+ * opcode subroutines we do not want to do this.
+ */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x65
+****************************************************************************/
+void x86emuOp_segovr_GS(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("GS:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_SEGOVR_GS;
+ /*
+ * note the lack of DECODE_CLEAR_SEGOVR(r) since, here is one of 4
+ * opcode subroutines we do not want to do this.
+ */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x66 - prefix for 32-bit register
+****************************************************************************/
+void x86emuOp_prefix_data(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("DATA:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_PREFIX_DATA;
+ /* note no DECODE_CLEAR_SEGOVR here. */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x67 - prefix for 32-bit address
+****************************************************************************/
+void x86emuOp_prefix_addr(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("ADDR:\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_PREFIX_ADDR;
+ /* note no DECODE_CLEAR_SEGOVR here. */
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x68
+****************************************************************************/
+void x86emuOp_push_word_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u32 imm;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ imm = fetch_long_imm();
+ } else {
+ imm = fetch_word_imm();
+ }
+ DECODE_PRINTF2("PUSH\t%x\n", imm);
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ push_long(imm);
+ } else {
+ push_word((u16)imm);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x69
+****************************************************************************/
+void x86emuOp_imul_word_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("IMUL\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+ u32 res_lo,res_hi;
+ s32 imm;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_long(srcoffset);
+ imm = fetch_long_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
+ if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) ||
+ (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+ u32 res;
+ s16 imm;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_word(srcoffset);
+ imm = fetch_word_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ res = (s16)srcval * (s16)imm;
+ if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) ||
+ (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+ u32 res_lo,res_hi;
+ s32 imm;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ imm = fetch_long_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
+ if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) ||
+ (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg,*srcreg;
+ u32 res;
+ s16 imm;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ imm = fetch_word_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ res = (s16)*srcreg * (s16)imm;
+ if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) ||
+ (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6a
+****************************************************************************/
+void x86emuOp_push_byte_IMM(u8 X86EMU_UNUSED(op1))
+{
+ s16 imm;
+
+ START_OF_INSTR();
+ imm = (s8)fetch_byte_imm();
+ DECODE_PRINTF2("PUSH\t%d\n", imm);
+ TRACE_AND_STEP();
+ push_word(imm);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6b
+****************************************************************************/
+void x86emuOp_imul_byte_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ s8 imm;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("IMUL\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+ u32 res_lo,res_hi;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_long(srcoffset);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)srcval,(s32)imm);
+ if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) ||
+ (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+ u32 res;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcval = fetch_data_word(srcoffset);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ res = (s16)srcval * (s16)imm;
+ if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) ||
+ (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+ u32 res_lo,res_hi;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)*srcreg,(s32)imm);
+ if ((((res_lo & 0x80000000) == 0) && (res_hi == 0x00000000)) ||
+ (((res_lo & 0x80000000) != 0) && (res_hi == 0xFFFFFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg,*srcreg;
+ u32 res;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", (s32)imm);
+ TRACE_AND_STEP();
+ res = (s16)*srcreg * (s16)imm;
+ if ((((res & 0x8000) == 0) && ((res >> 16) == 0x0000)) ||
+ (((res & 0x8000) != 0) && ((res >> 16) == 0xFFFF))) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6c
+****************************************************************************/
+void x86emuOp_ins_byte(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("INSB\n");
+ ins(1);
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6d
+****************************************************************************/
+void x86emuOp_ins_word(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("INSD\n");
+ ins(4);
+ } else {
+ DECODE_PRINTF("INSW\n");
+ ins(2);
+ }
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6e
+****************************************************************************/
+void x86emuOp_outs_byte(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("OUTSB\n");
+ outs(1);
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x6f
+****************************************************************************/
+void x86emuOp_outs_word(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("OUTSD\n");
+ outs(4);
+ } else {
+ DECODE_PRINTF("OUTSW\n");
+ outs(2);
+ }
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x70 - 0x7F
+****************************************************************************/
+int x86emu_check_jump_condition(u8 op);
+
+void x86emuOp_jump_near_cond(u8 op1)
+{
+ s8 offset;
+ u16 target;
+ int cond;
+
+ /* jump to byte offset if overflow flag is set */
+ START_OF_INSTR();
+ cond = x86emu_check_jump_condition(op1 & 0xF);
+ offset = (s8)fetch_byte_imm();
+ target = (u16)(M.x86.R_IP + (s16)offset);
+ DECODE_PRINTF2("%x\n", target);
+ TRACE_AND_STEP();
+ if (cond)
+ M.x86.R_IP = target;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x80
+****************************************************************************/
+void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 imm;
+ u8 destval;
+
+ /*
+ * Weirdo special case instruction format. Part of the opcode
+ * held below in "RH". Doubly nested case would result, except
+ * that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ADD\t");
+ break;
+ case 1:
+ DECODE_PRINTF("OR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("ADC\t");
+ break;
+ case 3:
+ DECODE_PRINTF("SBB\t");
+ break;
+ case 4:
+ DECODE_PRINTF("AND\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SUB\t");
+ break;
+ case 6:
+ DECODE_PRINTF("XOR\t");
+ break;
+ case 7:
+ DECODE_PRINTF("CMP\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ destval = fetch_data_byte(destoffset);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_byte_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",");
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_byte_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x81
+****************************************************************************/
+void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ /*
+ * Weirdo special case instruction format. Part of the opcode
+ * held below in "RH". Doubly nested case would result, except
+ * that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ADD\t");
+ break;
+ case 1:
+ DECODE_PRINTF("OR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("ADC\t");
+ break;
+ case 3:
+ DECODE_PRINTF("SBB\t");
+ break;
+ case 4:
+ DECODE_PRINTF("AND\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SUB\t");
+ break;
+ case 6:
+ DECODE_PRINTF("XOR\t");
+ break;
+ case 7:
+ DECODE_PRINTF("CMP\t");
+ break;
+ }
+ }
+#endif
+ /*
+ * Know operation, decode the mod byte to find the addressing
+ * mode.
+ */
+ if (mod < 3) {
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval,imm;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_long(destoffset);
+ imm = fetch_long_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_long_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval,imm;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_word(destoffset);
+ imm = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_word_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 destval,imm;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ imm = fetch_long_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_long_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ } else {
+ u16 *destreg;
+ u16 destval,imm;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ imm = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_word_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x82
+****************************************************************************/
+void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 imm;
+ u8 destval;
+
+ /*
+ * Weirdo special case instruction format. Part of the opcode
+ * held below in "RH". Doubly nested case would result, except
+ * that the decoded instruction Similar to opcode 81, except that
+ * the immediate byte is sign extended to a word length.
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ADD\t");
+ break;
+ case 1:
+ DECODE_PRINTF("OR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("ADC\t");
+ break;
+ case 3:
+ DECODE_PRINTF("SBB\t");
+ break;
+ case 4:
+ DECODE_PRINTF("AND\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SUB\t");
+ break;
+ case 6:
+ DECODE_PRINTF("XOR\t");
+ break;
+ case 7:
+ DECODE_PRINTF("CMP\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ destval = fetch_data_byte(destoffset);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_byte_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_byte_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x83
+****************************************************************************/
+void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ /*
+ * Weirdo special case instruction format. Part of the opcode
+ * held below in "RH". Doubly nested case would result, except
+ * that the decoded instruction Similar to opcode 81, except that
+ * the immediate byte is sign extended to a word length.
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ADD\t");
+ break;
+ case 1:
+ DECODE_PRINTF("OR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("ADC\t");
+ break;
+ case 3:
+ DECODE_PRINTF("SBB\t");
+ break;
+ case 4:
+ DECODE_PRINTF("AND\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SUB\t");
+ break;
+ case 6:
+ DECODE_PRINTF("XOR\t");
+ break;
+ case 7:
+ DECODE_PRINTF("CMP\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod,rl);
+
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval,imm;
+
+ destval = fetch_data_long(destoffset);
+ imm = (s8) fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_long_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval,imm;
+
+ destval = fetch_data_word(destoffset);
+ imm = (s8) fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_word_operation[rh]) (destval, imm);
+ if (rh != 7)
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 destval,imm;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ imm = (s8) fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_long_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ } else {
+ u16 *destreg;
+ u16 destval,imm;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ imm = (s8) fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ destval = (*genop_word_operation[rh]) (*destreg, imm);
+ if (rh != 7)
+ *destreg = destval;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x84
+****************************************************************************/
+void x86emuOp_test_byte_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg, *srcreg;
+ uint destoffset;
+ u8 destval;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("TEST\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ destval = fetch_data_byte(destoffset);
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_byte(destval, *srcreg);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_byte(*destreg, *srcreg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x85
+****************************************************************************/
+void x86emuOp_test_word_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("TEST\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *srcreg;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_long(destoffset);
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_long(destval, *srcreg);
+ } else {
+ u16 destval;
+ u16 *srcreg;
+
+ DECODE_PRINTF(",");
+ destval = fetch_data_word(destoffset);
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_word(destval, *srcreg);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_long(*destreg, *srcreg);
+ } else {
+ u16 *destreg,*srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ test_word(*destreg, *srcreg);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x86
+****************************************************************************/
+void x86emuOp_xchg_byte_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg, *srcreg;
+ uint destoffset;
+ u8 destval;
+ u8 tmp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("XCHG\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ destval = fetch_data_byte(destoffset);
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = destval;
+ destval = tmp;
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = *destreg;
+ *destreg = tmp;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x87
+****************************************************************************/
+void x86emuOp_xchg_word_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("XCHG\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg;
+ u32 destval,tmp;
+
+ destval = fetch_data_long(destoffset);
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = destval;
+ destval = tmp;
+ store_data_long(destoffset, destval);
+ } else {
+ u16 *srcreg;
+ u16 destval,tmp;
+
+ destval = fetch_data_word(destoffset);
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = destval;
+ destval = tmp;
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+ u32 tmp;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = *destreg;
+ *destreg = tmp;
+ } else {
+ u16 *destreg,*srcreg;
+ u16 tmp;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = *srcreg;
+ *srcreg = *destreg;
+ *destreg = tmp;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x88
+****************************************************************************/
+void x86emuOp_mov_byte_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg, *srcreg;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ store_data_byte(destoffset, *srcreg);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x89
+****************************************************************************/
+void x86emuOp_mov_word_RM_R(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg;
+
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ store_data_long(destoffset, *srcreg);
+ } else {
+ u16 *srcreg;
+
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ store_data_word(destoffset, *srcreg);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ } else {
+ u16 *destreg,*srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8a
+****************************************************************************/
+void x86emuOp_mov_byte_R_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg, *srcreg;
+ uint srcoffset;
+ u8 srcval;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_byte(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8b
+****************************************************************************/
+void x86emuOp_mov_word_R_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_long(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_word(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg, *srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ } else {
+ u16 *destreg, *srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8c
+****************************************************************************/
+void x86emuOp_mov_word_RM_SR(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u16 *destreg, *srcreg;
+ uint destoffset;
+ u16 destval;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ srcreg = decode_rm_seg_register(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = *srcreg;
+ store_data_word(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ srcreg = decode_rm_seg_register(rh);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8d
+****************************************************************************/
+void x86emuOp_lea_word_R_M(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u16 *srcreg;
+ uint destoffset;
+
+/*
+ * TODO: Need to handle address size prefix!
+ *
+ * lea eax,[eax+ebx*2] ??
+ */
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LEA\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *srcreg = (u16)destoffset;
+ }
+ /* } else { undefined. Do nothing. } */
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8e
+****************************************************************************/
+void x86emuOp_mov_word_SR_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u16 *destreg, *srcreg;
+ uint srcoffset;
+ u16 srcval;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destreg = decode_rm_seg_register(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_word(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else { /* register to register */
+ destreg = decode_rm_seg_register(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ /*
+ * Clean up, and reset all the R_xSP pointers to the correct
+ * locations. This is about 3x too much overhead (doing all the
+ * segreg ptrs when only one is needed, but this instruction
+ * *cannot* be that common, and this isn't too much work anyway.
+ */
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x8f
+****************************************************************************/
+void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (rh != 0) {
+ DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
+ HALT_SYS();
+ }
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = pop_long();
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = pop_word();
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = pop_long();
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = pop_word();
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x90
+****************************************************************************/
+void x86emuOp_nop(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("NOP\n");
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x91-0x97
+****************************************************************************/
+void x86emuOp_xchg_word_AX_register(u8 X86EMU_UNUSED(op1))
+{
+ u32 tmp;
+
+ op1 &= 0x7;
+
+ START_OF_INSTR();
+
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg32;
+ DECODE_PRINTF("XCHG\tEAX,");
+ reg32 = DECODE_RM_LONG_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = M.x86.R_EAX;
+ M.x86.R_EAX = *reg32;
+ *reg32 = tmp;
+ } else {
+ u16 *reg16;
+ DECODE_PRINTF("XCHG\tAX,");
+ reg16 = DECODE_RM_WORD_REGISTER(op1);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ tmp = M.x86.R_AX;
+ M.x86.R_EAX = *reg16;
+ *reg16 = (u16)tmp;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x98
+****************************************************************************/
+void x86emuOp_cbw(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("CWDE\n");
+ } else {
+ DECODE_PRINTF("CBW\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ if (M.x86.R_AX & 0x8000) {
+ M.x86.R_EAX |= 0xffff0000;
+ } else {
+ M.x86.R_EAX &= 0x0000ffff;
+ }
+ } else {
+ if (M.x86.R_AL & 0x80) {
+ M.x86.R_AH = 0xff;
+ } else {
+ M.x86.R_AH = 0x0;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x99
+****************************************************************************/
+void x86emuOp_cwd(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("CDQ\n");
+ } else {
+ DECODE_PRINTF("CWD\n");
+ }
+ DECODE_PRINTF("CWD\n");
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ if (M.x86.R_EAX & 0x80000000) {
+ M.x86.R_EDX = 0xffffffff;
+ } else {
+ M.x86.R_EDX = 0x0;
+ }
+ } else {
+ if (M.x86.R_AX & 0x8000) {
+ M.x86.R_DX = 0xffff;
+ } else {
+ M.x86.R_DX = 0x0;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9a
+****************************************************************************/
+void x86emuOp_call_far_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 farseg, faroff;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("CALL\t");
+ faroff = fetch_word_imm();
+ farseg = fetch_word_imm();
+ DECODE_PRINTF2("%04x:", farseg);
+ DECODE_PRINTF2("%04x\n", faroff);
+ CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, farseg, faroff, "FAR ");
+
+ /* XXX
+ *
+ * Hooked interrupt vectors calling into our "BIOS" will cause
+ * problems unless all intersegment stuff is checked for BIOS
+ * access. Check needed here. For moment, let it alone.
+ */
+ TRACE_AND_STEP();
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = farseg;
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = faroff;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9b
+****************************************************************************/
+void x86emuOp_wait(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("WAIT");
+ TRACE_AND_STEP();
+ /* NADA. */
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9c
+****************************************************************************/
+void x86emuOp_pushf_word(u8 X86EMU_UNUSED(op1))
+{
+ u32 flags;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("PUSHFD\n");
+ } else {
+ DECODE_PRINTF("PUSHF\n");
+ }
+ TRACE_AND_STEP();
+
+ /* clear out *all* bits not representing flags, and turn on real bits */
+ flags = (M.x86.R_EFLG & F_MSK) | F_ALWAYS_ON;
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ push_long(flags);
+ } else {
+ push_word((u16)flags);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9d
+****************************************************************************/
+void x86emuOp_popf_word(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("POPFD\n");
+ } else {
+ DECODE_PRINTF("POPF\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EFLG = pop_long();
+ } else {
+ M.x86.R_FLG = pop_word();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9e
+****************************************************************************/
+void x86emuOp_sahf(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("SAHF\n");
+ TRACE_AND_STEP();
+ /* clear the lower bits of the flag register */
+ M.x86.R_FLG &= 0xffffff00;
+ /* or in the AH register into the flags register */
+ M.x86.R_FLG |= M.x86.R_AH;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x9f
+****************************************************************************/
+void x86emuOp_lahf(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("LAHF\n");
+ TRACE_AND_STEP();
+ M.x86.R_AH = (u8)(M.x86.R_FLG & 0xff);
+ /*undocumented TC++ behavior??? Nope. It's documented, but
+ you have too look real hard to notice it. */
+ M.x86.R_AH |= 0x2;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa0
+****************************************************************************/
+void x86emuOp_mov_AL_M_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 offset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\tAL,");
+ offset = fetch_word_imm();
+ DECODE_PRINTF2("[%04x]\n", offset);
+ TRACE_AND_STEP();
+ M.x86.R_AL = fetch_data_byte(offset);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa1
+****************************************************************************/
+void x86emuOp_mov_AX_M_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 offset;
+
+ START_OF_INSTR();
+ offset = fetch_word_imm();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF2("MOV\tEAX,[%04x]\n", offset);
+ } else {
+ DECODE_PRINTF2("MOV\tAX,[%04x]\n", offset);
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EAX = fetch_data_long(offset);
+ } else {
+ M.x86.R_AX = fetch_data_word(offset);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa2
+****************************************************************************/
+void x86emuOp_mov_M_AL_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 offset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ offset = fetch_word_imm();
+ DECODE_PRINTF2("[%04x],AL\n", offset);
+ TRACE_AND_STEP();
+ store_data_byte(offset, M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa3
+****************************************************************************/
+void x86emuOp_mov_M_AX_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 offset;
+
+ START_OF_INSTR();
+ offset = fetch_word_imm();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF2("MOV\t[%04x],EAX\n", offset);
+ } else {
+ DECODE_PRINTF2("MOV\t[%04x],AX\n", offset);
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ store_data_long(offset, M.x86.R_EAX);
+ } else {
+ store_data_word(offset, M.x86.R_AX);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa4
+****************************************************************************/
+void x86emuOp_movs_byte(u8 X86EMU_UNUSED(op1))
+{
+ u8 val;
+ u32 count;
+ int inc;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOVS\tBYTE\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -1;
+ else
+ inc = 1;
+ TRACE_AND_STEP();
+ count = 1;
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ count = M.x86.R_CX;
+ M.x86.R_CX = 0;
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ }
+ while (count--) {
+ val = fetch_data_byte(M.x86.R_SI);
+ store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, val);
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa5
+****************************************************************************/
+void x86emuOp_movs_word(u8 X86EMU_UNUSED(op1))
+{
+ u32 val;
+ int inc;
+ u32 count;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("MOVS\tDWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -4;
+ else
+ inc = 4;
+ } else {
+ DECODE_PRINTF("MOVS\tWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -2;
+ else
+ inc = 2;
+ }
+ TRACE_AND_STEP();
+ count = 1;
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ count = M.x86.R_CX;
+ M.x86.R_CX = 0;
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ }
+ while (count--) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val = fetch_data_long(M.x86.R_SI);
+ store_data_long_abs(M.x86.R_ES, M.x86.R_DI, val);
+ } else {
+ val = fetch_data_word(M.x86.R_SI);
+ store_data_word_abs(M.x86.R_ES, M.x86.R_DI, (u16)val);
+ }
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa6
+****************************************************************************/
+void x86emuOp_cmps_byte(u8 X86EMU_UNUSED(op1))
+{
+ s8 val1, val2;
+ int inc;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("CMPS\tBYTE\n");
+ TRACE_AND_STEP();
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -1;
+ else
+ inc = 1;
+
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* REPE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ val1 = fetch_data_byte(M.x86.R_SI);
+ val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_byte(val1, val2);
+ M.x86.R_CX -= 1;
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ if ( (M.x86.mode & SYSMODE_PREFIX_REPE) && (ACCESS_FLAG(F_ZF) == 0) ) break;
+ if ( (M.x86.mode & SYSMODE_PREFIX_REPNE) && ACCESS_FLAG(F_ZF) ) break;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ val1 = fetch_data_byte(M.x86.R_SI);
+ val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_byte(val1, val2);
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa7
+****************************************************************************/
+void x86emuOp_cmps_word(u8 X86EMU_UNUSED(op1))
+{
+ u32 val1,val2;
+ int inc;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("CMPS\tDWORD\n");
+ inc = 4;
+ } else {
+ DECODE_PRINTF("CMPS\tWORD\n");
+ inc = 2;
+ }
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -inc;
+
+ TRACE_AND_STEP();
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* REPE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val1 = fetch_data_long(M.x86.R_SI);
+ val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_long(val1, val2);
+ } else {
+ val1 = fetch_data_word(M.x86.R_SI);
+ val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_word((u16)val1, (u16)val2);
+ }
+ M.x86.R_CX -= 1;
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ if ( (M.x86.mode & SYSMODE_PREFIX_REPE) && ACCESS_FLAG(F_ZF) == 0 ) break;
+ if ( (M.x86.mode & SYSMODE_PREFIX_REPNE) && ACCESS_FLAG(F_ZF) ) break;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val1 = fetch_data_long(M.x86.R_SI);
+ val2 = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_long(val1, val2);
+ } else {
+ val1 = fetch_data_word(M.x86.R_SI);
+ val2 = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_word((u16)val1, (u16)val2);
+ }
+ M.x86.R_SI += inc;
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa8
+****************************************************************************/
+void x86emuOp_test_AL_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int imm;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("TEST\tAL,");
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2("%04x\n", imm);
+ TRACE_AND_STEP();
+ test_byte(M.x86.R_AL, (u8)imm);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xa9
+****************************************************************************/
+void x86emuOp_test_AX_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u32 srcval;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("TEST\tEAX,");
+ srcval = fetch_long_imm();
+ } else {
+ DECODE_PRINTF("TEST\tAX,");
+ srcval = fetch_word_imm();
+ }
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ test_long(M.x86.R_EAX, srcval);
+ } else {
+ test_word(M.x86.R_AX, (u16)srcval);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xaa
+****************************************************************************/
+void x86emuOp_stos_byte(u8 X86EMU_UNUSED(op1))
+{
+ int inc;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("STOS\tBYTE\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -1;
+ else
+ inc = 1;
+ TRACE_AND_STEP();
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
+ M.x86.R_CX -= 1;
+ M.x86.R_DI += inc;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ store_data_byte_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AL);
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xab
+****************************************************************************/
+void x86emuOp_stos_word(u8 X86EMU_UNUSED(op1))
+{
+ int inc;
+ u32 count;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("STOS\tDWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -4;
+ else
+ inc = 4;
+ } else {
+ DECODE_PRINTF("STOS\tWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -2;
+ else
+ inc = 2;
+ }
+ TRACE_AND_STEP();
+ count = 1;
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ count = M.x86.R_CX;
+ M.x86.R_CX = 0;
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ }
+ while (count--) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ store_data_long_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_EAX);
+ } else {
+ store_data_word_abs(M.x86.R_ES, M.x86.R_DI, M.x86.R_AX);
+ }
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xac
+****************************************************************************/
+void x86emuOp_lods_byte(u8 X86EMU_UNUSED(op1))
+{
+ int inc;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LODS\tBYTE\n");
+ TRACE_AND_STEP();
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -1;
+ else
+ inc = 1;
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
+ M.x86.R_CX -= 1;
+ M.x86.R_SI += inc;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ M.x86.R_AL = fetch_data_byte(M.x86.R_SI);
+ M.x86.R_SI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xad
+****************************************************************************/
+void x86emuOp_lods_word(u8 X86EMU_UNUSED(op1))
+{
+ int inc;
+ u32 count;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("LODS\tDWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -4;
+ else
+ inc = 4;
+ } else {
+ DECODE_PRINTF("LODS\tWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -2;
+ else
+ inc = 2;
+ }
+ TRACE_AND_STEP();
+ count = 1;
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* move them until CX is ZERO. */
+ count = M.x86.R_CX;
+ M.x86.R_CX = 0;
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ }
+ while (count--) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EAX = fetch_data_long(M.x86.R_SI);
+ } else {
+ M.x86.R_AX = fetch_data_word(M.x86.R_SI);
+ }
+ M.x86.R_SI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xae
+****************************************************************************/
+void x86emuOp_scas_byte(u8 X86EMU_UNUSED(op1))
+{
+ s8 val2;
+ int inc;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("SCAS\tBYTE\n");
+ TRACE_AND_STEP();
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -1;
+ else
+ inc = 1;
+ if (M.x86.mode & SYSMODE_PREFIX_REPE) {
+ /* REPE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_byte(M.x86.R_AL, val2);
+ M.x86.R_CX -= 1;
+ M.x86.R_DI += inc;
+ if (ACCESS_FLAG(F_ZF) == 0)
+ break;
+ }
+ M.x86.mode &= ~SYSMODE_PREFIX_REPE;
+ } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
+ /* REPNE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_byte(M.x86.R_AL, val2);
+ M.x86.R_CX -= 1;
+ M.x86.R_DI += inc;
+ if (ACCESS_FLAG(F_ZF))
+ break; /* zero flag set means equal */
+ }
+ M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
+ } else {
+ val2 = fetch_data_byte_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_byte(M.x86.R_AL, val2);
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xaf
+****************************************************************************/
+void x86emuOp_scas_word(u8 X86EMU_UNUSED(op1))
+{
+ int inc;
+ u32 val;
+
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("SCAS\tDWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -4;
+ else
+ inc = 4;
+ } else {
+ DECODE_PRINTF("SCAS\tWORD\n");
+ if (ACCESS_FLAG(F_DF)) /* down */
+ inc = -2;
+ else
+ inc = 2;
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_REPE) {
+ /* REPE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_long(M.x86.R_EAX, val);
+ } else {
+ val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_word(M.x86.R_AX, (u16)val);
+ }
+ M.x86.R_CX -= 1;
+ M.x86.R_DI += inc;
+ if (ACCESS_FLAG(F_ZF) == 0)
+ break;
+ }
+ M.x86.mode &= ~SYSMODE_PREFIX_REPE;
+ } else if (M.x86.mode & SYSMODE_PREFIX_REPNE) {
+ /* REPNE */
+ /* move them until CX is ZERO. */
+ while (M.x86.R_CX != 0) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_long(M.x86.R_EAX, val);
+ } else {
+ val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_word(M.x86.R_AX, (u16)val);
+ }
+ M.x86.R_CX -= 1;
+ M.x86.R_DI += inc;
+ if (ACCESS_FLAG(F_ZF))
+ break; /* zero flag set means equal */
+ }
+ M.x86.mode &= ~SYSMODE_PREFIX_REPNE;
+ } else {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ val = fetch_data_long_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_long(M.x86.R_EAX, val);
+ } else {
+ val = fetch_data_word_abs(M.x86.R_ES, M.x86.R_DI);
+ cmp_word(M.x86.R_AX, (u16)val);
+ }
+ M.x86.R_DI += inc;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xb0 - 0xb7
+****************************************************************************/
+void x86emuOp_mov_byte_register_IMM(u8 op1)
+{
+ u8 imm, *ptr;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ ptr = DECODE_RM_BYTE_REGISTER(op1 & 0x7);
+ DECODE_PRINTF(",");
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ TRACE_AND_STEP();
+ *ptr = imm;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xb8 - 0xbf
+****************************************************************************/
+void x86emuOp_mov_word_register_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u32 srcval;
+
+ op1 &= 0x7;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *reg32;
+ reg32 = DECODE_RM_LONG_REGISTER(op1);
+ srcval = fetch_long_imm();
+ DECODE_PRINTF2(",%x\n", srcval);
+ TRACE_AND_STEP();
+ *reg32 = srcval;
+ } else {
+ u16 *reg16;
+ reg16 = DECODE_RM_WORD_REGISTER(op1);
+ srcval = fetch_word_imm();
+ DECODE_PRINTF2(",%x\n", srcval);
+ TRACE_AND_STEP();
+ *reg16 = (u16)srcval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc0
+****************************************************************************/
+void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 destval;
+ u8 amt;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ destval = fetch_data_byte(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (destval, amt);
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
+ *destreg = destval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc1
+****************************************************************************/
+void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 amt;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_long_operation[rh]) (destval, amt);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ DECODE_PRINTF("WORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_word_operation[rh]) (destval, amt);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ TRACE_AND_STEP();
+ *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ amt = fetch_byte_imm();
+ DECODE_PRINTF2(",%x\n", amt);
+ TRACE_AND_STEP();
+ *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc2
+****************************************************************************/
+void x86emuOp_ret_near_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 imm;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("RET\t");
+ imm = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = pop_word();
+ M.x86.R_SP += imm;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc3
+****************************************************************************/
+void x86emuOp_ret_near(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("RET\n");
+ RETURN_TRACE("RET",M.x86.saved_cs,M.x86.saved_ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc4
+****************************************************************************/
+void x86emuOp_les_R_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rh, rl;
+ u16 *dstreg;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LES\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *dstreg = fetch_data_word(srcoffset);
+ M.x86.R_ES = fetch_data_word(srcoffset + 2);
+ }
+ /* else UNDEFINED! register to register */
+
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc5
+****************************************************************************/
+void x86emuOp_lds_R_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rh, rl;
+ u16 *dstreg;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LDS\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *dstreg = fetch_data_word(srcoffset);
+ M.x86.R_DS = fetch_data_word(srcoffset + 2);
+ }
+ /* else UNDEFINED! */
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc6
+****************************************************************************/
+void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 imm;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (rh != 0) {
+ DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n");
+ HALT_SYS();
+ }
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%2x\n", imm);
+ TRACE_AND_STEP();
+ store_data_byte(destoffset, imm);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ imm = fetch_byte_imm();
+ DECODE_PRINTF2(",%2x\n", imm);
+ TRACE_AND_STEP();
+ *destreg = imm;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc7
+****************************************************************************/
+void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOV\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (rh != 0) {
+ DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n");
+ HALT_SYS();
+ }
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 imm;
+
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ imm = fetch_long_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ store_data_long(destoffset, imm);
+ } else {
+ u16 imm;
+
+ DECODE_PRINTF("WORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ imm = fetch_word_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ store_data_word(destoffset, imm);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 imm;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ imm = fetch_long_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ *destreg = imm;
+ } else {
+ u16 *destreg;
+ u16 imm;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ imm = fetch_word_imm();
+ DECODE_PRINTF2(",%x\n", imm);
+ TRACE_AND_STEP();
+ *destreg = imm;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc8
+****************************************************************************/
+void x86emuOp_enter(u8 X86EMU_UNUSED(op1))
+{
+ u16 local,frame_pointer;
+ u8 nesting;
+ int i;
+
+ START_OF_INSTR();
+ local = fetch_word_imm();
+ nesting = fetch_byte_imm();
+ DECODE_PRINTF2("ENTER %x\n", local);
+ DECODE_PRINTF2(",%x\n", nesting);
+ TRACE_AND_STEP();
+ push_word(M.x86.R_BP);
+ frame_pointer = M.x86.R_SP;
+ if (nesting > 0) {
+ for (i = 1; i < nesting; i++) {
+ M.x86.R_BP -= 2;
+ push_word(fetch_data_word_abs(M.x86.R_SS, M.x86.R_BP));
+ }
+ push_word(frame_pointer);
+ }
+ M.x86.R_BP = frame_pointer;
+ M.x86.R_SP = (u16)(M.x86.R_SP - local);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xc9
+****************************************************************************/
+void x86emuOp_leave(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("LEAVE\n");
+ TRACE_AND_STEP();
+ M.x86.R_SP = M.x86.R_BP;
+ M.x86.R_BP = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xca
+****************************************************************************/
+void x86emuOp_ret_far_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 imm;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("RETF\t");
+ imm = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", imm);
+ RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = pop_word();
+ M.x86.R_CS = pop_word();
+ M.x86.R_SP += imm;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xcb
+****************************************************************************/
+void x86emuOp_ret_far(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("RETF\n");
+ RETURN_TRACE("RETF",M.x86.saved_cs,M.x86.saved_ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = pop_word();
+ M.x86.R_CS = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xcc
+****************************************************************************/
+void x86emuOp_int3(u8 X86EMU_UNUSED(op1))
+{
+ u16 tmp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("INT 3\n");
+ tmp = (u16) mem_access_word(3 * 4 + 2);
+ /* access the segment register */
+ TRACE_AND_STEP();
+ if (_X86EMU_intrTab[3]) {
+ (*_X86EMU_intrTab[3])(3);
+ } else {
+ push_word((u16)M.x86.R_FLG);
+ CLEAR_FLAG(F_IF);
+ CLEAR_FLAG(F_TF);
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = mem_access_word(3 * 4 + 2);
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = mem_access_word(3 * 4);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xcd
+****************************************************************************/
+void x86emuOp_int_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 tmp;
+ u8 intnum;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("INT\t");
+ intnum = fetch_byte_imm();
+ DECODE_PRINTF2("%x\n", intnum);
+ tmp = mem_access_word(intnum * 4 + 2);
+ TRACE_AND_STEP();
+ if (_X86EMU_intrTab[intnum]) {
+ (*_X86EMU_intrTab[intnum])(intnum);
+ } else {
+ push_word((u16)M.x86.R_FLG);
+ CLEAR_FLAG(F_IF);
+ CLEAR_FLAG(F_TF);
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = mem_access_word(intnum * 4 + 2);
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = mem_access_word(intnum * 4);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xce
+****************************************************************************/
+void x86emuOp_into(u8 X86EMU_UNUSED(op1))
+{
+ u16 tmp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("INTO\n");
+ TRACE_AND_STEP();
+ if (ACCESS_FLAG(F_OF)) {
+ tmp = mem_access_word(4 * 4 + 2);
+ if (_X86EMU_intrTab[4]) {
+ (*_X86EMU_intrTab[4])(4);
+ } else {
+ push_word((u16)M.x86.R_FLG);
+ CLEAR_FLAG(F_IF);
+ CLEAR_FLAG(F_TF);
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = mem_access_word(4 * 4 + 2);
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = mem_access_word(4 * 4);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xcf
+****************************************************************************/
+void x86emuOp_iret(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("IRET\n");
+
+ TRACE_AND_STEP();
+
+ M.x86.R_IP = pop_word();
+ M.x86.R_CS = pop_word();
+ M.x86.R_FLG = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd0
+****************************************************************************/
+void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 destval;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",1\n");
+ destval = fetch_data_byte(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (destval, 1);
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",1\n");
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (*destreg, 1);
+ *destreg = destval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd1
+****************************************************************************/
+void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",1\n");
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_long_operation[rh]) (destval, 1);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ DECODE_PRINTF("WORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",1\n");
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_word_operation[rh]) (destval, 1);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",1\n");
+ TRACE_AND_STEP();
+ destval = (*opcD1_long_operation[rh]) (*destreg, 1);
+ *destreg = destval;
+ } else {
+ u16 destval;
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",1\n");
+ TRACE_AND_STEP();
+ destval = (*opcD1_word_operation[rh]) (*destreg, 1);
+ *destreg = destval;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd2
+****************************************************************************/
+void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 destval;
+ u8 amt;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ amt = M.x86.R_CL;
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",CL\n");
+ destval = fetch_data_byte(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (destval, amt);
+ store_data_byte(destoffset, destval);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ destval = (*opcD0_byte_operation[rh]) (*destreg, amt);
+ *destreg = destval;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd3
+****************************************************************************/
+void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 amt;
+
+ /*
+ * Yet another weirdo special case instruction format. Part of
+ * the opcode held below in "RH". Doubly nested case would
+ * result, except that the decoded instruction
+ */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("ROL\t");
+ break;
+ case 1:
+ DECODE_PRINTF("ROR\t");
+ break;
+ case 2:
+ DECODE_PRINTF("RCL\t");
+ break;
+ case 3:
+ DECODE_PRINTF("RCR\t");
+ break;
+ case 4:
+ DECODE_PRINTF("SHL\t");
+ break;
+ case 5:
+ DECODE_PRINTF("SHR\t");
+ break;
+ case 6:
+ DECODE_PRINTF("SAL\t");
+ break;
+ case 7:
+ DECODE_PRINTF("SAR\t");
+ break;
+ }
+ }
+#endif
+ /* know operation, decode the mod byte to find the addressing
+ mode. */
+ amt = M.x86.R_CL;
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",CL\n");
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_long_operation[rh]) (destval, amt);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ DECODE_PRINTF("WORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",CL\n");
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ destval = (*opcD1_word_operation[rh]) (destval, amt);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = (*opcD1_long_operation[rh]) (*destreg, amt);
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = (*opcD1_word_operation[rh]) (*destreg, amt);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd4
+****************************************************************************/
+void x86emuOp_aam(u8 X86EMU_UNUSED(op1))
+{
+ u8 a;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("AAM\n");
+ a = fetch_byte_imm(); /* this is a stupid encoding. */
+ if (a != 10) {
+ DECODE_PRINTF("ERROR DECODING AAM\n");
+ TRACE_REGS();
+ HALT_SYS();
+ }
+ TRACE_AND_STEP();
+ /* note the type change here --- returning AL and AH in AX. */
+ M.x86.R_AX = aam_word(M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd5
+****************************************************************************/
+void x86emuOp_aad(u8 X86EMU_UNUSED(op1))
+{
+ u8 a;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("AAD\n");
+ a = fetch_byte_imm();
+ TRACE_AND_STEP();
+ M.x86.R_AX = aad_word(M.x86.R_AX);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/* opcode 0xd6 ILLEGAL OPCODE */
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xd7
+****************************************************************************/
+void x86emuOp_xlat(u8 X86EMU_UNUSED(op1))
+{
+ u16 addr;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("XLAT\n");
+ TRACE_AND_STEP();
+ addr = (u16)(M.x86.R_BX + (u8)M.x86.R_AL);
+ M.x86.R_AL = fetch_data_byte(addr);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/* instuctions D8 .. DF are in i87_ops.c */
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe0
+****************************************************************************/
+void x86emuOp_loopne(u8 X86EMU_UNUSED(op1))
+{
+ s16 ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LOOPNE\t");
+ ip = (s8) fetch_byte_imm();
+ ip += (s16) M.x86.R_IP;
+ DECODE_PRINTF2("%04x\n", ip);
+ TRACE_AND_STEP();
+ M.x86.R_CX -= 1;
+ if (M.x86.R_CX != 0 && !ACCESS_FLAG(F_ZF)) /* CX != 0 and !ZF */
+ M.x86.R_IP = ip;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe1
+****************************************************************************/
+void x86emuOp_loope(u8 X86EMU_UNUSED(op1))
+{
+ s16 ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LOOPE\t");
+ ip = (s8) fetch_byte_imm();
+ ip += (s16) M.x86.R_IP;
+ DECODE_PRINTF2("%04x\n", ip);
+ TRACE_AND_STEP();
+ M.x86.R_CX -= 1;
+ if (M.x86.R_CX != 0 && ACCESS_FLAG(F_ZF)) /* CX != 0 and ZF */
+ M.x86.R_IP = ip;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe2
+****************************************************************************/
+void x86emuOp_loop(u8 X86EMU_UNUSED(op1))
+{
+ s16 ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LOOP\t");
+ ip = (s8) fetch_byte_imm();
+ ip += (s16) M.x86.R_IP;
+ DECODE_PRINTF2("%04x\n", ip);
+ TRACE_AND_STEP();
+ M.x86.R_CX -= 1;
+ if (M.x86.R_CX != 0)
+ M.x86.R_IP = ip;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe3
+****************************************************************************/
+void x86emuOp_jcxz(u8 X86EMU_UNUSED(op1))
+{
+ u16 target;
+ s8 offset;
+
+ /* jump to byte offset if overflow flag is set */
+ START_OF_INSTR();
+ DECODE_PRINTF("JCXZ\t");
+ offset = (s8)fetch_byte_imm();
+ target = (u16)(M.x86.R_IP + offset);
+ DECODE_PRINTF2("%x\n", target);
+ TRACE_AND_STEP();
+ if (M.x86.R_CX == 0)
+ M.x86.R_IP = target;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe4
+****************************************************************************/
+void x86emuOp_in_byte_AL_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u8 port;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("IN\t");
+ port = (u8) fetch_byte_imm();
+ DECODE_PRINTF2("%x,AL\n", port);
+ TRACE_AND_STEP();
+ M.x86.R_AL = (*sys_inb)(port);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe5
+****************************************************************************/
+void x86emuOp_in_word_AX_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u8 port;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("IN\t");
+ port = (u8) fetch_byte_imm();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF2("EAX,%x\n", port);
+ } else {
+ DECODE_PRINTF2("AX,%x\n", port);
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EAX = (*sys_inl)(port);
+ } else {
+ M.x86.R_AX = (*sys_inw)(port);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe6
+****************************************************************************/
+void x86emuOp_out_byte_IMM_AL(u8 X86EMU_UNUSED(op1))
+{
+ u8 port;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("OUT\t");
+ port = (u8) fetch_byte_imm();
+ DECODE_PRINTF2("%x,AL\n", port);
+ TRACE_AND_STEP();
+ (*sys_outb)(port, M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe7
+****************************************************************************/
+void x86emuOp_out_word_IMM_AX(u8 X86EMU_UNUSED(op1))
+{
+ u8 port;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("OUT\t");
+ port = (u8) fetch_byte_imm();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF2("%x,EAX\n", port);
+ } else {
+ DECODE_PRINTF2("%x,AX\n", port);
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ (*sys_outl)(port, M.x86.R_EAX);
+ } else {
+ (*sys_outw)(port, M.x86.R_AX);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe8
+****************************************************************************/
+void x86emuOp_call_near_IMM(u8 X86EMU_UNUSED(op1))
+{
+ s16 ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("CALL\t");
+ ip = (s16) fetch_word_imm();
+ ip += (s16) M.x86.R_IP; /* CHECK SIGN */
+ DECODE_PRINTF2("%04x\n", ip);
+ CALL_TRACE(M.x86.saved_cs, M.x86.saved_ip, M.x86.R_CS, ip, "");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = ip;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xe9
+****************************************************************************/
+void x86emuOp_jump_near_IMM(u8 X86EMU_UNUSED(op1))
+{
+ int ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("JMP\t");
+ ip = (s16)fetch_word_imm();
+ ip += (s16)M.x86.R_IP;
+ DECODE_PRINTF2("%04x\n", ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = (u16)ip;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xea
+****************************************************************************/
+void x86emuOp_jump_far_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 cs, ip;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("JMP\tFAR ");
+ ip = fetch_word_imm();
+ cs = fetch_word_imm();
+ DECODE_PRINTF2("%04x:", cs);
+ DECODE_PRINTF2("%04x\n", ip);
+ TRACE_AND_STEP();
+ M.x86.R_IP = ip;
+ M.x86.R_CS = cs;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xeb
+****************************************************************************/
+void x86emuOp_jump_byte_IMM(u8 X86EMU_UNUSED(op1))
+{
+ u16 target;
+ s8 offset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("JMP\t");
+ offset = (s8)fetch_byte_imm();
+ target = (u16)(M.x86.R_IP + offset);
+ DECODE_PRINTF2("%x\n", target);
+ TRACE_AND_STEP();
+ M.x86.R_IP = target;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xec
+****************************************************************************/
+void x86emuOp_in_byte_AL_DX(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("IN\tAL,DX\n");
+ TRACE_AND_STEP();
+ M.x86.R_AL = (*sys_inb)(M.x86.R_DX);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xed
+****************************************************************************/
+void x86emuOp_in_word_AX_DX(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("IN\tEAX,DX\n");
+ } else {
+ DECODE_PRINTF("IN\tAX,DX\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_EAX = (*sys_inl)(M.x86.R_DX);
+ } else {
+ M.x86.R_AX = (*sys_inw)(M.x86.R_DX);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xee
+****************************************************************************/
+void x86emuOp_out_byte_DX_AL(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("OUT\tDX,AL\n");
+ TRACE_AND_STEP();
+ (*sys_outb)(M.x86.R_DX, M.x86.R_AL);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xef
+****************************************************************************/
+void x86emuOp_out_word_DX_AX(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("OUT\tDX,EAX\n");
+ } else {
+ DECODE_PRINTF("OUT\tDX,AX\n");
+ }
+ TRACE_AND_STEP();
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ (*sys_outl)(M.x86.R_DX, M.x86.R_EAX);
+ } else {
+ (*sys_outw)(M.x86.R_DX, M.x86.R_AX);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf0
+****************************************************************************/
+void x86emuOp_lock(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("LOCK:\n");
+ TRACE_AND_STEP();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/*opcode 0xf1 ILLEGAL OPERATION */
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf2
+****************************************************************************/
+void x86emuOp_repne(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("REPNE\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_PREFIX_REPNE;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf3
+****************************************************************************/
+void x86emuOp_repe(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("REPE\n");
+ TRACE_AND_STEP();
+ M.x86.mode |= SYSMODE_PREFIX_REPE;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf4
+****************************************************************************/
+void x86emuOp_halt(u8 X86EMU_UNUSED(op1))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("HALT\n");
+ TRACE_AND_STEP();
+ HALT_SYS();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf5
+****************************************************************************/
+void x86emuOp_cmc(u8 X86EMU_UNUSED(op1))
+{
+ /* complement the carry flag. */
+ START_OF_INSTR();
+ DECODE_PRINTF("CMC\n");
+ TRACE_AND_STEP();
+ TOGGLE_FLAG(F_CF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf6
+****************************************************************************/
+void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ u8 *destreg;
+ uint destoffset;
+ u8 destval, srcval;
+
+ /* long, drawn out code follows. Double switch for a total
+ of 32 cases. */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ DECODE_PRINTF(opF6_names[rh]);
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ destval = fetch_data_byte(destoffset);
+
+ switch (rh) {
+ case 0: /* test byte imm */
+ DECODE_PRINTF(",");
+ srcval = fetch_byte_imm();
+ DECODE_PRINTF2("%02x\n", srcval);
+ TRACE_AND_STEP();
+ test_byte(destval, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = not_byte(destval);
+ store_data_byte(destoffset, destval);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = neg_byte(destval);
+ store_data_byte(destoffset, destval);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_byte(destval);
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_byte(destval);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_byte(destval);
+ break;
+ default:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_byte(destval);
+ break;
+ }
+ } else { /* mod=11 */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ switch (rh) {
+ case 0: /* test byte imm */
+ DECODE_PRINTF(",");
+ srcval = fetch_byte_imm();
+ DECODE_PRINTF2("%02x\n", srcval);
+ TRACE_AND_STEP();
+ test_byte(*destreg, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = not_byte(*destreg);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = neg_byte(*destreg);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_byte(*destreg); /*!!! */
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_byte(*destreg);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_byte(*destreg);
+ break;
+ default:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_byte(*destreg);
+ break;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf7
+****************************************************************************/
+void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ DECODE_PRINTF(opF6_names[rh]);
+ if (mod < 3) {
+
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval, srcval;
+
+ DECODE_PRINTF("DWORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ destval = fetch_data_long(destoffset);
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF(",");
+ srcval = fetch_long_imm();
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ test_long(destval, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = not_long(destval);
+ store_data_long(destoffset, destval);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = neg_long(destval);
+ store_data_long(destoffset, destval);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_long(destval);
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_long(destval);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_long(destval);
+ break;
+ case 7:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_long(destval);
+ break;
+ }
+ } else {
+ u16 destval, srcval;
+
+ DECODE_PRINTF("WORD PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ destval = fetch_data_word(destoffset);
+
+ switch (rh) {
+ case 0: /* test word imm */
+ DECODE_PRINTF(",");
+ srcval = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ test_word(destval, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = not_word(destval);
+ store_data_word(destoffset, destval);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ destval = neg_word(destval);
+ store_data_word(destoffset, destval);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_word(destval);
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_word(destval);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_word(destval);
+ break;
+ case 7:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_word(destval);
+ break;
+ }
+ }
+
+ } else { /* mod=11 */
+
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+
+ switch (rh) {
+ case 0: /* test word imm */
+ DECODE_PRINTF(",");
+ srcval = fetch_long_imm();
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ test_long(*destreg, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = not_long(*destreg);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = neg_long(*destreg);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_long(*destreg); /*!!! */
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_long(*destreg);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_long(*destreg);
+ break;
+ case 7:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_long(*destreg);
+ break;
+ }
+ } else {
+ u16 *destreg;
+ u16 srcval;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+
+ switch (rh) {
+ case 0: /* test word imm */
+ DECODE_PRINTF(",");
+ srcval = fetch_word_imm();
+ DECODE_PRINTF2("%x\n", srcval);
+ TRACE_AND_STEP();
+ test_word(*destreg, srcval);
+ break;
+ case 1:
+ DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n");
+ HALT_SYS();
+ break;
+ case 2:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = not_word(*destreg);
+ break;
+ case 3:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = neg_word(*destreg);
+ break;
+ case 4:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ mul_word(*destreg); /*!!! */
+ break;
+ case 5:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ imul_word(*destreg);
+ break;
+ case 6:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ div_word(*destreg);
+ break;
+ case 7:
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ idiv_word(*destreg);
+ break;
+ }
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf8
+****************************************************************************/
+void x86emuOp_clc(u8 X86EMU_UNUSED(op1))
+{
+ /* clear the carry flag. */
+ START_OF_INSTR();
+ DECODE_PRINTF("CLC\n");
+ TRACE_AND_STEP();
+ CLEAR_FLAG(F_CF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xf9
+****************************************************************************/
+void x86emuOp_stc(u8 X86EMU_UNUSED(op1))
+{
+ /* set the carry flag. */
+ START_OF_INSTR();
+ DECODE_PRINTF("STC\n");
+ TRACE_AND_STEP();
+ SET_FLAG(F_CF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xfa
+****************************************************************************/
+void x86emuOp_cli(u8 X86EMU_UNUSED(op1))
+{
+ /* clear interrupts. */
+ START_OF_INSTR();
+ DECODE_PRINTF("CLI\n");
+ TRACE_AND_STEP();
+ CLEAR_FLAG(F_IF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xfb
+****************************************************************************/
+void x86emuOp_sti(u8 X86EMU_UNUSED(op1))
+{
+ /* enable interrupts. */
+ START_OF_INSTR();
+ DECODE_PRINTF("STI\n");
+ TRACE_AND_STEP();
+ SET_FLAG(F_IF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xfc
+****************************************************************************/
+void x86emuOp_cld(u8 X86EMU_UNUSED(op1))
+{
+ /* clear interrupts. */
+ START_OF_INSTR();
+ DECODE_PRINTF("CLD\n");
+ TRACE_AND_STEP();
+ CLEAR_FLAG(F_DF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xfd
+****************************************************************************/
+void x86emuOp_std(u8 X86EMU_UNUSED(op1))
+{
+ /* clear interrupts. */
+ START_OF_INSTR();
+ DECODE_PRINTF("STD\n");
+ TRACE_AND_STEP();
+ SET_FLAG(F_DF);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xfe
+****************************************************************************/
+void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rh, rl;
+ u8 destval;
+ uint destoffset;
+ u8 *destreg;
+
+ /* Yet another special case instruction. */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ DECODE_PRINTF("INC\t");
+ break;
+ case 1:
+ DECODE_PRINTF("DEC\t");
+ break;
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod);
+ HALT_SYS();
+ break;
+ }
+ }
+#endif
+ if (mod < 3) {
+ DECODE_PRINTF("BYTE PTR ");
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ destval = fetch_data_byte(destoffset);
+ TRACE_AND_STEP();
+ if (rh == 0)
+ destval = inc_byte(destval);
+ else
+ destval = dec_byte(destval);
+ store_data_byte(destoffset, destval);
+ } else {
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ if (rh == 0)
+ *destreg = inc_byte(*destreg);
+ else
+ *destreg = dec_byte(*destreg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0xff
+****************************************************************************/
+void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1))
+{
+ int mod, rh, rl;
+ uint destoffset = 0;
+ u16 *destreg;
+ u16 destval,destval2;
+
+ /* Yet another special case instruction. */
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+#ifdef DEBUG
+ if (DEBUG_DECODE()) {
+ /* XXX DECODE_PRINTF may be changed to something more
+ general, so that it is important to leave the strings
+ in the same format, even though the result is that the
+ above test is done twice. */
+
+ switch (rh) {
+ case 0:
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("INC\tDWORD PTR ");
+ } else {
+ DECODE_PRINTF("INC\tWORD PTR ");
+ }
+ break;
+ case 1:
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ DECODE_PRINTF("DEC\tDWORD PTR ");
+ } else {
+ DECODE_PRINTF("DEC\tWORD PTR ");
+ }
+ break;
+ case 2:
+ DECODE_PRINTF("CALL\t ");
+ break;
+ case 3:
+ DECODE_PRINTF("CALL\tFAR ");
+ break;
+ case 4:
+ DECODE_PRINTF("JMP\t");
+ break;
+ case 5:
+ DECODE_PRINTF("JMP\tFAR ");
+ break;
+ case 6:
+ DECODE_PRINTF("PUSH\t");
+ break;
+ case 7:
+ DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t");
+ HALT_SYS();
+ break;
+ }
+ }
+#endif
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ switch (rh) {
+ case 0: /* inc word ptr ... */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ destval = inc_long(destval);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ destval = inc_word(destval);
+ store_data_word(destoffset, destval);
+ }
+ break;
+ case 1: /* dec word ptr ... */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ destval = dec_long(destval);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ destval = dec_word(destval);
+ store_data_word(destoffset, destval);
+ }
+ break;
+ case 2: /* call word ptr ... */
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = destval;
+ break;
+ case 3: /* call far ptr ... */
+ destval = fetch_data_word(destoffset);
+ destval2 = fetch_data_word(destoffset + 2);
+ TRACE_AND_STEP();
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = destval2;
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = destval;
+ break;
+ case 4: /* jmp word ptr ... */
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ M.x86.R_IP = destval;
+ break;
+ case 5: /* jmp far ptr ... */
+ destval = fetch_data_word(destoffset);
+ destval2 = fetch_data_word(destoffset + 2);
+ TRACE_AND_STEP();
+ M.x86.R_IP = destval;
+ M.x86.R_CS = destval2;
+ break;
+ case 6: /* push word ptr ... */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+
+ destval = fetch_data_long(destoffset);
+ TRACE_AND_STEP();
+ push_long(destval);
+ } else {
+ u16 destval;
+
+ destval = fetch_data_word(destoffset);
+ TRACE_AND_STEP();
+ push_word(destval);
+ }
+ break;
+ }
+ } else {
+ switch (rh) {
+ case 0:
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = inc_long(*destreg);
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = inc_word(*destreg);
+ }
+ break;
+ case 1:
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = dec_long(*destreg);
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = dec_word(*destreg);
+ }
+ break;
+ case 2: /* call word ptr ... */
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = *destreg;
+ break;
+ case 3: /* jmp far ptr ... */
+ DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
+ TRACE_AND_STEP();
+ HALT_SYS();
+ break;
+
+ case 4: /* jmp ... */
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ M.x86.R_IP = (u16) (*destreg);
+ break;
+ case 5: /* jmp far ptr ... */
+ DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n");
+ TRACE_AND_STEP();
+ HALT_SYS();
+ break;
+ case 6:
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ push_long(*destreg);
+ } else {
+ u16 *destreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ push_word(*destreg);
+ }
+ break;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/***************************************************************************
+ * Single byte operation code table:
+ **************************************************************************/
+void (*x86emu_optab[256])(u8) __attribute__ ((section(".got2"))) =
+{
+/* 0x00 */ x86emuOp_genop_byte_RM_R,
+/* 0x01 */ x86emuOp_genop_word_RM_R,
+/* 0x02 */ x86emuOp_genop_byte_R_RM,
+/* 0x03 */ x86emuOp_genop_word_R_RM,
+/* 0x04 */ x86emuOp_genop_byte_AL_IMM,
+/* 0x05 */ x86emuOp_genop_word_AX_IMM,
+/* 0x06 */ x86emuOp_push_ES,
+/* 0x07 */ x86emuOp_pop_ES,
+
+/* 0x08 */ x86emuOp_genop_byte_RM_R,
+/* 0x09 */ x86emuOp_genop_word_RM_R,
+/* 0x0a */ x86emuOp_genop_byte_R_RM,
+/* 0x0b */ x86emuOp_genop_word_R_RM,
+/* 0x0c */ x86emuOp_genop_byte_AL_IMM,
+/* 0x0d */ x86emuOp_genop_word_AX_IMM,
+/* 0x0e */ x86emuOp_push_CS,
+/* 0x0f */ x86emuOp_two_byte,
+
+/* 0x10 */ x86emuOp_genop_byte_RM_R,
+/* 0x11 */ x86emuOp_genop_word_RM_R,
+/* 0x12 */ x86emuOp_genop_byte_R_RM,
+/* 0x13 */ x86emuOp_genop_word_R_RM,
+/* 0x14 */ x86emuOp_genop_byte_AL_IMM,
+/* 0x15 */ x86emuOp_genop_word_AX_IMM,
+/* 0x16 */ x86emuOp_push_SS,
+/* 0x17 */ x86emuOp_pop_SS,
+
+/* 0x18 */ x86emuOp_genop_byte_RM_R,
+/* 0x19 */ x86emuOp_genop_word_RM_R,
+/* 0x1a */ x86emuOp_genop_byte_R_RM,
+/* 0x1b */ x86emuOp_genop_word_R_RM,
+/* 0x1c */ x86emuOp_genop_byte_AL_IMM,
+/* 0x1d */ x86emuOp_genop_word_AX_IMM,
+/* 0x1e */ x86emuOp_push_DS,
+/* 0x1f */ x86emuOp_pop_DS,
+
+/* 0x20 */ x86emuOp_genop_byte_RM_R,
+/* 0x21 */ x86emuOp_genop_word_RM_R,
+/* 0x22 */ x86emuOp_genop_byte_R_RM,
+/* 0x23 */ x86emuOp_genop_word_R_RM,
+/* 0x24 */ x86emuOp_genop_byte_AL_IMM,
+/* 0x25 */ x86emuOp_genop_word_AX_IMM,
+/* 0x26 */ x86emuOp_segovr_ES,
+/* 0x27 */ x86emuOp_daa,
+
+/* 0x28 */ x86emuOp_genop_byte_RM_R,
+/* 0x29 */ x86emuOp_genop_word_RM_R,
+/* 0x2a */ x86emuOp_genop_byte_R_RM,
+/* 0x2b */ x86emuOp_genop_word_R_RM,
+/* 0x2c */ x86emuOp_genop_byte_AL_IMM,
+/* 0x2d */ x86emuOp_genop_word_AX_IMM,
+/* 0x2e */ x86emuOp_segovr_CS,
+/* 0x2f */ x86emuOp_das,
+
+/* 0x30 */ x86emuOp_genop_byte_RM_R,
+/* 0x31 */ x86emuOp_genop_word_RM_R,
+/* 0x32 */ x86emuOp_genop_byte_R_RM,
+/* 0x33 */ x86emuOp_genop_word_R_RM,
+/* 0x34 */ x86emuOp_genop_byte_AL_IMM,
+/* 0x35 */ x86emuOp_genop_word_AX_IMM,
+/* 0x36 */ x86emuOp_segovr_SS,
+/* 0x37 */ x86emuOp_aaa,
+
+/* 0x38 */ x86emuOp_genop_byte_RM_R,
+/* 0x39 */ x86emuOp_genop_word_RM_R,
+/* 0x3a */ x86emuOp_genop_byte_R_RM,
+/* 0x3b */ x86emuOp_genop_word_R_RM,
+/* 0x3c */ x86emuOp_genop_byte_AL_IMM,
+/* 0x3d */ x86emuOp_genop_word_AX_IMM,
+/* 0x3e */ x86emuOp_segovr_DS,
+/* 0x3f */ x86emuOp_aas,
+
+/* 0x40 */ x86emuOp_inc_register,
+/* 0x41 */ x86emuOp_inc_register,
+/* 0x42 */ x86emuOp_inc_register,
+/* 0x43 */ x86emuOp_inc_register,
+/* 0x44 */ x86emuOp_inc_register,
+/* 0x45 */ x86emuOp_inc_register,
+/* 0x46 */ x86emuOp_inc_register,
+/* 0x47 */ x86emuOp_inc_register,
+
+/* 0x48 */ x86emuOp_dec_register,
+/* 0x49 */ x86emuOp_dec_register,
+/* 0x4a */ x86emuOp_dec_register,
+/* 0x4b */ x86emuOp_dec_register,
+/* 0x4c */ x86emuOp_dec_register,
+/* 0x4d */ x86emuOp_dec_register,
+/* 0x4e */ x86emuOp_dec_register,
+/* 0x4f */ x86emuOp_dec_register,
+
+/* 0x50 */ x86emuOp_push_register,
+/* 0x51 */ x86emuOp_push_register,
+/* 0x52 */ x86emuOp_push_register,
+/* 0x53 */ x86emuOp_push_register,
+/* 0x54 */ x86emuOp_push_register,
+/* 0x55 */ x86emuOp_push_register,
+/* 0x56 */ x86emuOp_push_register,
+/* 0x57 */ x86emuOp_push_register,
+
+/* 0x58 */ x86emuOp_pop_register,
+/* 0x59 */ x86emuOp_pop_register,
+/* 0x5a */ x86emuOp_pop_register,
+/* 0x5b */ x86emuOp_pop_register,
+/* 0x5c */ x86emuOp_pop_register,
+/* 0x5d */ x86emuOp_pop_register,
+/* 0x5e */ x86emuOp_pop_register,
+/* 0x5f */ x86emuOp_pop_register,
+
+/* 0x60 */ x86emuOp_push_all,
+/* 0x61 */ x86emuOp_pop_all,
+/* 0x62 */ x86emuOp_illegal_op, /* bound */
+/* 0x63 */ x86emuOp_illegal_op, /* arpl */
+/* 0x64 */ x86emuOp_segovr_FS,
+/* 0x65 */ x86emuOp_segovr_GS,
+/* 0x66 */ x86emuOp_prefix_data,
+/* 0x67 */ x86emuOp_prefix_addr,
+
+/* 0x68 */ x86emuOp_push_word_IMM,
+/* 0x69 */ x86emuOp_imul_word_IMM,
+/* 0x6a */ x86emuOp_push_byte_IMM,
+/* 0x6b */ x86emuOp_imul_byte_IMM,
+/* 0x6c */ x86emuOp_ins_byte,
+/* 0x6d */ x86emuOp_ins_word,
+/* 0x6e */ x86emuOp_outs_byte,
+/* 0x6f */ x86emuOp_outs_word,
+
+/* 0x70 */ x86emuOp_jump_near_cond,
+/* 0x71 */ x86emuOp_jump_near_cond,
+/* 0x72 */ x86emuOp_jump_near_cond,
+/* 0x73 */ x86emuOp_jump_near_cond,
+/* 0x74 */ x86emuOp_jump_near_cond,
+/* 0x75 */ x86emuOp_jump_near_cond,
+/* 0x76 */ x86emuOp_jump_near_cond,
+/* 0x77 */ x86emuOp_jump_near_cond,
+
+/* 0x78 */ x86emuOp_jump_near_cond,
+/* 0x79 */ x86emuOp_jump_near_cond,
+/* 0x7a */ x86emuOp_jump_near_cond,
+/* 0x7b */ x86emuOp_jump_near_cond,
+/* 0x7c */ x86emuOp_jump_near_cond,
+/* 0x7d */ x86emuOp_jump_near_cond,
+/* 0x7e */ x86emuOp_jump_near_cond,
+/* 0x7f */ x86emuOp_jump_near_cond,
+
+/* 0x80 */ x86emuOp_opc80_byte_RM_IMM,
+/* 0x81 */ x86emuOp_opc81_word_RM_IMM,
+/* 0x82 */ x86emuOp_opc82_byte_RM_IMM,
+/* 0x83 */ x86emuOp_opc83_word_RM_IMM,
+/* 0x84 */ x86emuOp_test_byte_RM_R,
+/* 0x85 */ x86emuOp_test_word_RM_R,
+/* 0x86 */ x86emuOp_xchg_byte_RM_R,
+/* 0x87 */ x86emuOp_xchg_word_RM_R,
+
+/* 0x88 */ x86emuOp_mov_byte_RM_R,
+/* 0x89 */ x86emuOp_mov_word_RM_R,
+/* 0x8a */ x86emuOp_mov_byte_R_RM,
+/* 0x8b */ x86emuOp_mov_word_R_RM,
+/* 0x8c */ x86emuOp_mov_word_RM_SR,
+/* 0x8d */ x86emuOp_lea_word_R_M,
+/* 0x8e */ x86emuOp_mov_word_SR_RM,
+/* 0x8f */ x86emuOp_pop_RM,
+
+/* 0x90 */ x86emuOp_nop,
+/* 0x91 */ x86emuOp_xchg_word_AX_register,
+/* 0x92 */ x86emuOp_xchg_word_AX_register,
+/* 0x93 */ x86emuOp_xchg_word_AX_register,
+/* 0x94 */ x86emuOp_xchg_word_AX_register,
+/* 0x95 */ x86emuOp_xchg_word_AX_register,
+/* 0x96 */ x86emuOp_xchg_word_AX_register,
+/* 0x97 */ x86emuOp_xchg_word_AX_register,
+
+/* 0x98 */ x86emuOp_cbw,
+/* 0x99 */ x86emuOp_cwd,
+/* 0x9a */ x86emuOp_call_far_IMM,
+/* 0x9b */ x86emuOp_wait,
+/* 0x9c */ x86emuOp_pushf_word,
+/* 0x9d */ x86emuOp_popf_word,
+/* 0x9e */ x86emuOp_sahf,
+/* 0x9f */ x86emuOp_lahf,
+
+/* 0xa0 */ x86emuOp_mov_AL_M_IMM,
+/* 0xa1 */ x86emuOp_mov_AX_M_IMM,
+/* 0xa2 */ x86emuOp_mov_M_AL_IMM,
+/* 0xa3 */ x86emuOp_mov_M_AX_IMM,
+/* 0xa4 */ x86emuOp_movs_byte,
+/* 0xa5 */ x86emuOp_movs_word,
+/* 0xa6 */ x86emuOp_cmps_byte,
+/* 0xa7 */ x86emuOp_cmps_word,
+/* 0xa8 */ x86emuOp_test_AL_IMM,
+/* 0xa9 */ x86emuOp_test_AX_IMM,
+/* 0xaa */ x86emuOp_stos_byte,
+/* 0xab */ x86emuOp_stos_word,
+/* 0xac */ x86emuOp_lods_byte,
+/* 0xad */ x86emuOp_lods_word,
+/* 0xac */ x86emuOp_scas_byte,
+/* 0xad */ x86emuOp_scas_word,
+
+/* 0xb0 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb1 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb2 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb3 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb4 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb5 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb6 */ x86emuOp_mov_byte_register_IMM,
+/* 0xb7 */ x86emuOp_mov_byte_register_IMM,
+
+/* 0xb8 */ x86emuOp_mov_word_register_IMM,
+/* 0xb9 */ x86emuOp_mov_word_register_IMM,
+/* 0xba */ x86emuOp_mov_word_register_IMM,
+/* 0xbb */ x86emuOp_mov_word_register_IMM,
+/* 0xbc */ x86emuOp_mov_word_register_IMM,
+/* 0xbd */ x86emuOp_mov_word_register_IMM,
+/* 0xbe */ x86emuOp_mov_word_register_IMM,
+/* 0xbf */ x86emuOp_mov_word_register_IMM,
+
+/* 0xc0 */ x86emuOp_opcC0_byte_RM_MEM,
+/* 0xc1 */ x86emuOp_opcC1_word_RM_MEM,
+/* 0xc2 */ x86emuOp_ret_near_IMM,
+/* 0xc3 */ x86emuOp_ret_near,
+/* 0xc4 */ x86emuOp_les_R_IMM,
+/* 0xc5 */ x86emuOp_lds_R_IMM,
+/* 0xc6 */ x86emuOp_mov_byte_RM_IMM,
+/* 0xc7 */ x86emuOp_mov_word_RM_IMM,
+/* 0xc8 */ x86emuOp_enter,
+/* 0xc9 */ x86emuOp_leave,
+/* 0xca */ x86emuOp_ret_far_IMM,
+/* 0xcb */ x86emuOp_ret_far,
+/* 0xcc */ x86emuOp_int3,
+/* 0xcd */ x86emuOp_int_IMM,
+/* 0xce */ x86emuOp_into,
+/* 0xcf */ x86emuOp_iret,
+
+/* 0xd0 */ x86emuOp_opcD0_byte_RM_1,
+/* 0xd1 */ x86emuOp_opcD1_word_RM_1,
+/* 0xd2 */ x86emuOp_opcD2_byte_RM_CL,
+/* 0xd3 */ x86emuOp_opcD3_word_RM_CL,
+/* 0xd4 */ x86emuOp_aam,
+/* 0xd5 */ x86emuOp_aad,
+/* 0xd6 */ x86emuOp_illegal_op, /* Undocumented SETALC instruction */
+/* 0xd7 */ x86emuOp_xlat,
+/* 0xd8 */ NULL, /*x86emuOp_esc_coprocess_d8,*/
+/* 0xd9 */ NULL, /*x86emuOp_esc_coprocess_d9,*/
+/* 0xda */ NULL, /*x86emuOp_esc_coprocess_da,*/
+/* 0xdb */ NULL, /*x86emuOp_esc_coprocess_db,*/
+/* 0xdc */ NULL, /*x86emuOp_esc_coprocess_dc,*/
+/* 0xdd */ NULL, /*x86emuOp_esc_coprocess_dd,*/
+/* 0xde */ NULL, /*x86emuOp_esc_coprocess_de,*/
+/* 0xdf */ NULL, /*x86emuOp_esc_coprocess_df,*/
+
+/* 0xe0 */ x86emuOp_loopne,
+/* 0xe1 */ x86emuOp_loope,
+/* 0xe2 */ x86emuOp_loop,
+/* 0xe3 */ x86emuOp_jcxz,
+/* 0xe4 */ x86emuOp_in_byte_AL_IMM,
+/* 0xe5 */ x86emuOp_in_word_AX_IMM,
+/* 0xe6 */ x86emuOp_out_byte_IMM_AL,
+/* 0xe7 */ x86emuOp_out_word_IMM_AX,
+
+/* 0xe8 */ x86emuOp_call_near_IMM,
+/* 0xe9 */ x86emuOp_jump_near_IMM,
+/* 0xea */ x86emuOp_jump_far_IMM,
+/* 0xeb */ x86emuOp_jump_byte_IMM,
+/* 0xec */ x86emuOp_in_byte_AL_DX,
+/* 0xed */ x86emuOp_in_word_AX_DX,
+/* 0xee */ x86emuOp_out_byte_DX_AL,
+/* 0xef */ x86emuOp_out_word_DX_AX,
+
+/* 0xf0 */ x86emuOp_lock,
+/* 0xf1 */ x86emuOp_illegal_op,
+/* 0xf2 */ x86emuOp_repne,
+/* 0xf3 */ x86emuOp_repe,
+/* 0xf4 */ x86emuOp_halt,
+/* 0xf5 */ x86emuOp_cmc,
+/* 0xf6 */ x86emuOp_opcF6_byte_RM,
+/* 0xf7 */ x86emuOp_opcF7_word_RM,
+
+/* 0xf8 */ x86emuOp_clc,
+/* 0xf9 */ x86emuOp_stc,
+/* 0xfa */ x86emuOp_cli,
+/* 0xfb */ x86emuOp_sti,
+/* 0xfc */ x86emuOp_cld,
+/* 0xfd */ x86emuOp_std,
+/* 0xfe */ x86emuOp_opcFE_byte_RM,
+/* 0xff */ x86emuOp_opcFF_word_RM,
+};
diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c
new file mode 100644
index 0000000..2412b24
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/ops2.c
@@ -0,0 +1,1770 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Jason Jin <Jason.jin@freescale.com>
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file includes subroutines to implement the decoding
+* and emulation of all the x86 extended two-byte processor
+* instructions.
+*
+* Jason port this file to u-boot. Put the function pointer into
+* got2 sector.
+*
+****************************************************************************/
+
+#include "x86emu/x86emui.h"
+
+/*----------------------------- Implementation ----------------------------*/
+
+/****************************************************************************
+PARAMETERS:
+op1 - Instruction op code
+
+REMARKS:
+Handles illegal opcodes.
+****************************************************************************/
+void x86emuOp2_illegal_op(
+ u8 op2)
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
+ TRACE_REGS();
+ printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n",
+ M.x86.R_CS, M.x86.R_IP-2,op2);
+ HALT_SYS();
+ END_OF_INSTR();
+}
+
+#define xorl(a,b) ((a) && !(b)) || (!(a) && (b))
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0x80-0x8F
+****************************************************************************/
+int x86emu_check_jump_condition(u8 op)
+{
+ switch (op) {
+ case 0x0:
+ DECODE_PRINTF("JO\t");
+ return ACCESS_FLAG(F_OF);
+ case 0x1:
+ DECODE_PRINTF("JNO\t");
+ return !ACCESS_FLAG(F_OF);
+ break;
+ case 0x2:
+ DECODE_PRINTF("JB\t");
+ return ACCESS_FLAG(F_CF);
+ break;
+ case 0x3:
+ DECODE_PRINTF("JNB\t");
+ return !ACCESS_FLAG(F_CF);
+ break;
+ case 0x4:
+ DECODE_PRINTF("JZ\t");
+ return ACCESS_FLAG(F_ZF);
+ break;
+ case 0x5:
+ DECODE_PRINTF("JNZ\t");
+ return !ACCESS_FLAG(F_ZF);
+ break;
+ case 0x6:
+ DECODE_PRINTF("JBE\t");
+ return ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
+ break;
+ case 0x7:
+ DECODE_PRINTF("JNBE\t");
+ return !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
+ break;
+ case 0x8:
+ DECODE_PRINTF("JS\t");
+ return ACCESS_FLAG(F_SF);
+ break;
+ case 0x9:
+ DECODE_PRINTF("JNS\t");
+ return !ACCESS_FLAG(F_SF);
+ break;
+ case 0xa:
+ DECODE_PRINTF("JP\t");
+ return ACCESS_FLAG(F_PF);
+ break;
+ case 0xb:
+ DECODE_PRINTF("JNP\t");
+ return !ACCESS_FLAG(F_PF);
+ break;
+ case 0xc:
+ DECODE_PRINTF("JL\t");
+ return xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
+ break;
+ case 0xd:
+ DECODE_PRINTF("JNL\t");
+ return !xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
+ break;
+ case 0xe:
+ DECODE_PRINTF("JLE\t");
+ return (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
+ ACCESS_FLAG(F_ZF));
+ break;
+ default:
+ DECODE_PRINTF("JNLE\t");
+ return !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
+ ACCESS_FLAG(F_ZF));
+ }
+}
+
+void x86emuOp2_long_jump(u8 op2)
+{
+ s32 target;
+ int cond;
+
+ /* conditional jump to word offset. */
+ START_OF_INSTR();
+ cond = x86emu_check_jump_condition(op2 & 0xF);
+ target = (s16) fetch_word_imm();
+ target += (s16) M.x86.R_IP;
+ DECODE_PRINTF2("%04x\n", target);
+ TRACE_AND_STEP();
+ if (cond)
+ M.x86.R_IP = (u16)target;
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0x90-0x9F
+****************************************************************************/
+void x86emuOp2_set_byte(u8 op2)
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 *destreg;
+ char *name = 0;
+ int cond = 0;
+
+ START_OF_INSTR();
+ switch (op2) {
+ case 0x90:
+ name = "SETO\t";
+ cond = ACCESS_FLAG(F_OF);
+ break;
+ case 0x91:
+ name = "SETNO\t";
+ cond = !ACCESS_FLAG(F_OF);
+ break;
+ case 0x92:
+ name = "SETB\t";
+ cond = ACCESS_FLAG(F_CF);
+ break;
+ case 0x93:
+ name = "SETNB\t";
+ cond = !ACCESS_FLAG(F_CF);
+ break;
+ case 0x94:
+ name = "SETZ\t";
+ cond = ACCESS_FLAG(F_ZF);
+ break;
+ case 0x95:
+ name = "SETNZ\t";
+ cond = !ACCESS_FLAG(F_ZF);
+ break;
+ case 0x96:
+ name = "SETBE\t";
+ cond = ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF);
+ break;
+ case 0x97:
+ name = "SETNBE\t";
+ cond = !(ACCESS_FLAG(F_CF) || ACCESS_FLAG(F_ZF));
+ break;
+ case 0x98:
+ name = "SETS\t";
+ cond = ACCESS_FLAG(F_SF);
+ break;
+ case 0x99:
+ name = "SETNS\t";
+ cond = !ACCESS_FLAG(F_SF);
+ break;
+ case 0x9a:
+ name = "SETP\t";
+ cond = ACCESS_FLAG(F_PF);
+ break;
+ case 0x9b:
+ name = "SETNP\t";
+ cond = !ACCESS_FLAG(F_PF);
+ break;
+ case 0x9c:
+ name = "SETL\t";
+ cond = xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
+ break;
+ case 0x9d:
+ name = "SETNL\t";
+ cond = !xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF));
+ break;
+ case 0x9e:
+ name = "SETLE\t";
+ cond = (xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
+ ACCESS_FLAG(F_ZF));
+ break;
+ case 0x9f:
+ name = "SETNLE\t";
+ cond = !(xorl(ACCESS_FLAG(F_SF), ACCESS_FLAG(F_OF)) ||
+ ACCESS_FLAG(F_ZF));
+ break;
+ }
+ DECODE_PRINTF(name);
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ TRACE_AND_STEP();
+ store_data_byte(destoffset, cond ? 0x01 : 0x00);
+ } else { /* register to register */
+ destreg = DECODE_RM_BYTE_REGISTER(rl);
+ TRACE_AND_STEP();
+ *destreg = cond ? 0x01 : 0x00;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa0
+****************************************************************************/
+void x86emuOp2_push_FS(u8 X86EMU_UNUSED(op2))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tFS\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_FS);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa1
+****************************************************************************/
+void x86emuOp2_pop_FS(u8 X86EMU_UNUSED(op2))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\tFS\n");
+ TRACE_AND_STEP();
+ M.x86.R_FS = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa3
+****************************************************************************/
+void x86emuOp2_bt_R(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ int bit,disp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BT\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval;
+ u32 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ disp = (s16)*shiftreg >> 5;
+ srcval = fetch_data_long(srcoffset+disp);
+ CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
+ } else {
+ u16 srcval;
+ u16 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ disp = (s16)*shiftreg >> 4;
+ srcval = fetch_data_word(srcoffset+disp);
+ CONDITIONAL_SET_FLAG(srcval & (0x1 << bit),F_CF);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg,*shiftreg;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
+ } else {
+ u16 *srcreg,*shiftreg;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ CONDITIONAL_SET_FLAG(*srcreg & (0x1 << bit),F_CF);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa4
+****************************************************************************/
+void x86emuOp2_shld_IMM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 shift;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("SHLD\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ destval = fetch_data_long(destoffset);
+ destval = shld_long(destval,*shiftreg,shift);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+ u16 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ destval = fetch_data_word(destoffset);
+ destval = shld_word(destval,*shiftreg,shift);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ *destreg = shld_long(*destreg,*shiftreg,shift);
+ } else {
+ u16 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ *destreg = shld_word(*destreg,*shiftreg,shift);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa5
+****************************************************************************/
+void x86emuOp2_shld_CL(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("SHLD\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ destval = fetch_data_long(destoffset);
+ destval = shld_long(destval,*shiftreg,M.x86.R_CL);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+ u16 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ destval = fetch_data_word(destoffset);
+ destval = shld_word(destval,*shiftreg,M.x86.R_CL);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = shld_long(*destreg,*shiftreg,M.x86.R_CL);
+ } else {
+ u16 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = shld_word(*destreg,*shiftreg,M.x86.R_CL);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa8
+****************************************************************************/
+void x86emuOp2_push_GS(u8 X86EMU_UNUSED(op2))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("PUSH\tGS\n");
+ TRACE_AND_STEP();
+ push_word(M.x86.R_GS);
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xa9
+****************************************************************************/
+void x86emuOp2_pop_GS(u8 X86EMU_UNUSED(op2))
+{
+ START_OF_INSTR();
+ DECODE_PRINTF("POP\tGS\n");
+ TRACE_AND_STEP();
+ M.x86.R_GS = pop_word();
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xaa
+****************************************************************************/
+void x86emuOp2_bts_R(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ int bit,disp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BTS\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval,mask;
+ u32 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ disp = (s16)*shiftreg >> 5;
+ srcval = fetch_data_long(srcoffset+disp);
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_long(srcoffset+disp, srcval | mask);
+ } else {
+ u16 srcval,mask;
+ u16 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ disp = (s16)*shiftreg >> 4;
+ srcval = fetch_data_word(srcoffset+disp);
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_word(srcoffset+disp, srcval | mask);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg,*shiftreg;
+ u32 mask;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg |= mask;
+ } else {
+ u16 *srcreg,*shiftreg;
+ u16 mask;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg |= mask;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xac
+****************************************************************************/
+void x86emuOp2_shrd_IMM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint destoffset;
+ u8 shift;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("SHLD\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ destval = fetch_data_long(destoffset);
+ destval = shrd_long(destval,*shiftreg,shift);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+ u16 *shiftreg;
+
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ destval = fetch_data_word(destoffset);
+ destval = shrd_word(destval,*shiftreg,shift);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ *destreg = shrd_long(*destreg,*shiftreg,shift);
+ } else {
+ u16 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2("%d\n", shift);
+ TRACE_AND_STEP();
+ *destreg = shrd_word(*destreg,*shiftreg,shift);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xad
+****************************************************************************/
+void x86emuOp2_shrd_CL(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint destoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("SHLD\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 destval;
+ u32 *shiftreg;
+
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ destval = fetch_data_long(destoffset);
+ destval = shrd_long(destval,*shiftreg,M.x86.R_CL);
+ store_data_long(destoffset, destval);
+ } else {
+ u16 destval;
+ u16 *shiftreg;
+
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ destval = fetch_data_word(destoffset);
+ destval = shrd_word(destval,*shiftreg,M.x86.R_CL);
+ store_data_word(destoffset, destval);
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = shrd_long(*destreg,*shiftreg,M.x86.R_CL);
+ } else {
+ u16 *destreg,*shiftreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",CL\n");
+ TRACE_AND_STEP();
+ *destreg = shrd_word(*destreg,*shiftreg,M.x86.R_CL);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xaf
+****************************************************************************/
+void x86emuOp2_imul_R_RM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("IMUL\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+ u32 res_lo,res_hi;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_long(srcoffset);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)srcval);
+ if (res_hi != 0) {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+ u32 res;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_word(srcoffset);
+ TRACE_AND_STEP();
+ res = (s16)*destreg * (s16)srcval;
+ if (res > 0xFFFF) {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg,*srcreg;
+ u32 res_lo,res_hi;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ TRACE_AND_STEP();
+ imul_long_direct(&res_lo,&res_hi,(s32)*destreg,(s32)*srcreg);
+ if (res_hi != 0) {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ }
+ *destreg = (u32)res_lo;
+ } else {
+ u16 *destreg,*srcreg;
+ u32 res;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ res = (s16)*destreg * (s16)*srcreg;
+ if (res > 0xFFFF) {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ }
+ *destreg = (u16)res;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb2
+****************************************************************************/
+void x86emuOp2_lss_R_IMM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rh, rl;
+ u16 *dstreg;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LSS\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *dstreg = fetch_data_word(srcoffset);
+ M.x86.R_SS = fetch_data_word(srcoffset + 2);
+ } else { /* register to register */
+ /* UNDEFINED! */
+ TRACE_AND_STEP();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb3
+****************************************************************************/
+void x86emuOp2_btr_R(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ int bit,disp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BTR\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval,mask;
+ u32 *shiftreg;
+
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ disp = (s16)*shiftreg >> 5;
+ srcval = fetch_data_long(srcoffset+disp);
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_long(srcoffset+disp, srcval & ~mask);
+ } else {
+ u16 srcval,mask;
+ u16 *shiftreg;
+
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ disp = (s16)*shiftreg >> 4;
+ srcval = fetch_data_word(srcoffset+disp);
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_word(srcoffset+disp, (u16)(srcval & ~mask));
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg,*shiftreg;
+ u32 mask;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg &= ~mask;
+ } else {
+ u16 *srcreg,*shiftreg;
+ u16 mask;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg &= ~mask;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb4
+****************************************************************************/
+void x86emuOp2_lfs_R_IMM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rh, rl;
+ u16 *dstreg;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LFS\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *dstreg = fetch_data_word(srcoffset);
+ M.x86.R_FS = fetch_data_word(srcoffset + 2);
+ } else { /* register to register */
+ /* UNDEFINED! */
+ TRACE_AND_STEP();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb5
+****************************************************************************/
+void x86emuOp2_lgs_R_IMM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rh, rl;
+ u16 *dstreg;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("LGS\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *dstreg = fetch_data_word(srcoffset);
+ M.x86.R_GS = fetch_data_word(srcoffset + 2);
+ } else { /* register to register */
+ /* UNDEFINED! */
+ TRACE_AND_STEP();
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb6
+****************************************************************************/
+void x86emuOp2_movzx_byte_R_RM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOVZX\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_byte(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_byte(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u8 *srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ } else {
+ u16 *destreg;
+ u8 *srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xb7
+****************************************************************************/
+void x86emuOp2_movzx_word_R_RM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ u32 *destreg;
+ u32 srcval;
+ u16 *srcreg;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOVZX\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = fetch_data_word(srcoffset);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else { /* register to register */
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = *srcreg;
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xba
+****************************************************************************/
+void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ u8 shift;
+ int bit;
+
+ START_OF_INSTR();
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ switch (rh) {
+ case 4:
+ DECODE_PRINTF("BT\t");
+ break;
+ case 5:
+ DECODE_PRINTF("BTS\t");
+ break;
+ case 6:
+ DECODE_PRINTF("BTR\t");
+ break;
+ case 7:
+ DECODE_PRINTF("BTC\t");
+ break;
+ default:
+ DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n");
+ TRACE_REGS();
+ printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n",
+ M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl);
+ HALT_SYS();
+ }
+ if (mod < 3) {
+
+ srcoffset = decode_rmXX_address(mod, rl);
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", shift);
+ TRACE_AND_STEP();
+
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval, mask;
+
+ bit = shift & 0x1F;
+ srcval = fetch_data_long(srcoffset);
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ switch (rh) {
+ case 5:
+ store_data_long(srcoffset, srcval | mask);
+ break;
+ case 6:
+ store_data_long(srcoffset, srcval & ~mask);
+ break;
+ case 7:
+ store_data_long(srcoffset, srcval ^ mask);
+ break;
+ default:
+ break;
+ }
+ } else {
+ u16 srcval, mask;
+
+ bit = shift & 0xF;
+ srcval = fetch_data_word(srcoffset);
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ switch (rh) {
+ case 5:
+ store_data_word(srcoffset, srcval | mask);
+ break;
+ case 6:
+ store_data_word(srcoffset, srcval & ~mask);
+ break;
+ case 7:
+ store_data_word(srcoffset, srcval ^ mask);
+ break;
+ default:
+ break;
+ }
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg;
+ u32 mask;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", shift);
+ TRACE_AND_STEP();
+ bit = shift & 0x1F;
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ switch (rh) {
+ case 5:
+ *srcreg |= mask;
+ break;
+ case 6:
+ *srcreg &= ~mask;
+ break;
+ case 7:
+ *srcreg ^= mask;
+ break;
+ default:
+ break;
+ }
+ } else {
+ u16 *srcreg;
+ u16 mask;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ shift = fetch_byte_imm();
+ DECODE_PRINTF2(",%d\n", shift);
+ TRACE_AND_STEP();
+ bit = shift & 0xF;
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ switch (rh) {
+ case 5:
+ *srcreg |= mask;
+ break;
+ case 6:
+ *srcreg &= ~mask;
+ break;
+ case 7:
+ *srcreg ^= mask;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xbb
+****************************************************************************/
+void x86emuOp2_btc_R(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ int bit,disp;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BTC\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval,mask;
+ u32 *shiftreg;
+
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ disp = (s16)*shiftreg >> 5;
+ srcval = fetch_data_long(srcoffset+disp);
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_long(srcoffset+disp, srcval ^ mask);
+ } else {
+ u16 srcval,mask;
+ u16 *shiftreg;
+
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ disp = (s16)*shiftreg >> 4;
+ srcval = fetch_data_word(srcoffset+disp);
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(srcval & mask,F_CF);
+ store_data_word(srcoffset+disp, (u16)(srcval ^ mask));
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg,*shiftreg;
+ u32 mask;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0x1F;
+ mask = (0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg ^= mask;
+ } else {
+ u16 *srcreg,*shiftreg;
+ u16 mask;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ shiftreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ bit = *shiftreg & 0xF;
+ mask = (u16)(0x1 << bit);
+ CONDITIONAL_SET_FLAG(*srcreg & mask,F_CF);
+ *srcreg ^= mask;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xbc
+****************************************************************************/
+void x86emuOp2_bsf(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BSF\n");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval, *dstreg;
+
+ dstreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ srcval = fetch_data_long(srcoffset);
+ CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
+ for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
+ if ((srcval >> *dstreg) & 1) break;
+ } else {
+ u16 srcval, *dstreg;
+
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ srcval = fetch_data_word(srcoffset);
+ CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
+ for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
+ if ((srcval >> *dstreg) & 1) break;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg, *dstreg;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ dstreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
+ for(*dstreg = 0; *dstreg < 32; (*dstreg)++)
+ if ((*srcreg >> *dstreg) & 1) break;
+ } else {
+ u16 *srcreg, *dstreg;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
+ for(*dstreg = 0; *dstreg < 16; (*dstreg)++)
+ if ((*srcreg >> *dstreg) & 1) break;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xbd
+****************************************************************************/
+void x86emuOp2_bsr(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("BSF\n");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ srcoffset = decode_rmXX_address(mod, rl);
+ DECODE_PRINTF(",");
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 srcval, *dstreg;
+
+ dstreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ srcval = fetch_data_long(srcoffset);
+ CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
+ for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
+ if ((srcval >> *dstreg) & 1) break;
+ } else {
+ u16 srcval, *dstreg;
+
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ srcval = fetch_data_word(srcoffset);
+ CONDITIONAL_SET_FLAG(srcval == 0, F_ZF);
+ for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
+ if ((srcval >> *dstreg) & 1) break;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *srcreg, *dstreg;
+
+ srcreg = DECODE_RM_LONG_REGISTER(rl);
+ DECODE_PRINTF(",");
+ dstreg = DECODE_RM_LONG_REGISTER(rh);
+ TRACE_AND_STEP();
+ CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
+ for(*dstreg = 31; *dstreg > 0; (*dstreg)--)
+ if ((*srcreg >> *dstreg) & 1) break;
+ } else {
+ u16 *srcreg, *dstreg;
+
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF(",");
+ dstreg = DECODE_RM_WORD_REGISTER(rh);
+ TRACE_AND_STEP();
+ CONDITIONAL_SET_FLAG(*srcreg == 0, F_ZF);
+ for(*dstreg = 15; *dstreg > 0; (*dstreg)--)
+ if ((*srcreg >> *dstreg) & 1) break;
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xbe
+****************************************************************************/
+void x86emuOp2_movsx_byte_R_RM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOVSX\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u32 srcval;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = (s32)((s8)fetch_data_byte(srcoffset));
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else {
+ u16 *destreg;
+ u16 srcval;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = (s16)((s8)fetch_data_byte(srcoffset));
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ }
+ } else { /* register to register */
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ u32 *destreg;
+ u8 *srcreg;
+
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = (s32)((s8)*srcreg);
+ } else {
+ u16 *destreg;
+ u8 *srcreg;
+
+ destreg = DECODE_RM_WORD_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_BYTE_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = (s16)((s8)*srcreg);
+ }
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/****************************************************************************
+REMARKS:
+Handles opcode 0x0f,0xbf
+****************************************************************************/
+void x86emuOp2_movsx_word_R_RM(u8 X86EMU_UNUSED(op2))
+{
+ int mod, rl, rh;
+ uint srcoffset;
+ u32 *destreg;
+ u32 srcval;
+ u16 *srcreg;
+
+ START_OF_INSTR();
+ DECODE_PRINTF("MOVSX\t");
+ FETCH_DECODE_MODRM(mod, rh, rl);
+ if (mod < 3) {
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcoffset = decode_rmXX_address(mod, rl);
+ srcval = (s32)((s16)fetch_data_word(srcoffset));
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = srcval;
+ } else { /* register to register */
+ destreg = DECODE_RM_LONG_REGISTER(rh);
+ DECODE_PRINTF(",");
+ srcreg = DECODE_RM_WORD_REGISTER(rl);
+ DECODE_PRINTF("\n");
+ TRACE_AND_STEP();
+ *destreg = (s32)((s16)*srcreg);
+ }
+ DECODE_CLEAR_SEGOVR();
+ END_OF_INSTR();
+}
+
+/***************************************************************************
+ * Double byte operation code table:
+ **************************************************************************/
+void (*x86emu_optab2[256])(u8) __attribute__((section(".got2"))) =
+{
+/* 0x00 */ x86emuOp2_illegal_op, /* Group F (ring 0 PM) */
+/* 0x01 */ x86emuOp2_illegal_op, /* Group G (ring 0 PM) */
+/* 0x02 */ x86emuOp2_illegal_op, /* lar (ring 0 PM) */
+/* 0x03 */ x86emuOp2_illegal_op, /* lsl (ring 0 PM) */
+/* 0x04 */ x86emuOp2_illegal_op,
+/* 0x05 */ x86emuOp2_illegal_op, /* loadall (undocumented) */
+/* 0x06 */ x86emuOp2_illegal_op, /* clts (ring 0 PM) */
+/* 0x07 */ x86emuOp2_illegal_op, /* loadall (undocumented) */
+/* 0x08 */ x86emuOp2_illegal_op, /* invd (ring 0 PM) */
+/* 0x09 */ x86emuOp2_illegal_op, /* wbinvd (ring 0 PM) */
+/* 0x0a */ x86emuOp2_illegal_op,
+/* 0x0b */ x86emuOp2_illegal_op,
+/* 0x0c */ x86emuOp2_illegal_op,
+/* 0x0d */ x86emuOp2_illegal_op,
+/* 0x0e */ x86emuOp2_illegal_op,
+/* 0x0f */ x86emuOp2_illegal_op,
+
+/* 0x10 */ x86emuOp2_illegal_op,
+/* 0x11 */ x86emuOp2_illegal_op,
+/* 0x12 */ x86emuOp2_illegal_op,
+/* 0x13 */ x86emuOp2_illegal_op,
+/* 0x14 */ x86emuOp2_illegal_op,
+/* 0x15 */ x86emuOp2_illegal_op,
+/* 0x16 */ x86emuOp2_illegal_op,
+/* 0x17 */ x86emuOp2_illegal_op,
+/* 0x18 */ x86emuOp2_illegal_op,
+/* 0x19 */ x86emuOp2_illegal_op,
+/* 0x1a */ x86emuOp2_illegal_op,
+/* 0x1b */ x86emuOp2_illegal_op,
+/* 0x1c */ x86emuOp2_illegal_op,
+/* 0x1d */ x86emuOp2_illegal_op,
+/* 0x1e */ x86emuOp2_illegal_op,
+/* 0x1f */ x86emuOp2_illegal_op,
+
+/* 0x20 */ x86emuOp2_illegal_op, /* mov reg32,creg (ring 0 PM) */
+/* 0x21 */ x86emuOp2_illegal_op, /* mov reg32,dreg (ring 0 PM) */
+/* 0x22 */ x86emuOp2_illegal_op, /* mov creg,reg32 (ring 0 PM) */
+/* 0x23 */ x86emuOp2_illegal_op, /* mov dreg,reg32 (ring 0 PM) */
+/* 0x24 */ x86emuOp2_illegal_op, /* mov reg32,treg (ring 0 PM) */
+/* 0x25 */ x86emuOp2_illegal_op,
+/* 0x26 */ x86emuOp2_illegal_op, /* mov treg,reg32 (ring 0 PM) */
+/* 0x27 */ x86emuOp2_illegal_op,
+/* 0x28 */ x86emuOp2_illegal_op,
+/* 0x29 */ x86emuOp2_illegal_op,
+/* 0x2a */ x86emuOp2_illegal_op,
+/* 0x2b */ x86emuOp2_illegal_op,
+/* 0x2c */ x86emuOp2_illegal_op,
+/* 0x2d */ x86emuOp2_illegal_op,
+/* 0x2e */ x86emuOp2_illegal_op,
+/* 0x2f */ x86emuOp2_illegal_op,
+
+/* 0x30 */ x86emuOp2_illegal_op,
+/* 0x31 */ x86emuOp2_illegal_op,
+/* 0x32 */ x86emuOp2_illegal_op,
+/* 0x33 */ x86emuOp2_illegal_op,
+/* 0x34 */ x86emuOp2_illegal_op,
+/* 0x35 */ x86emuOp2_illegal_op,
+/* 0x36 */ x86emuOp2_illegal_op,
+/* 0x37 */ x86emuOp2_illegal_op,
+/* 0x38 */ x86emuOp2_illegal_op,
+/* 0x39 */ x86emuOp2_illegal_op,
+/* 0x3a */ x86emuOp2_illegal_op,
+/* 0x3b */ x86emuOp2_illegal_op,
+/* 0x3c */ x86emuOp2_illegal_op,
+/* 0x3d */ x86emuOp2_illegal_op,
+/* 0x3e */ x86emuOp2_illegal_op,
+/* 0x3f */ x86emuOp2_illegal_op,
+
+/* 0x40 */ x86emuOp2_illegal_op,
+/* 0x41 */ x86emuOp2_illegal_op,
+/* 0x42 */ x86emuOp2_illegal_op,
+/* 0x43 */ x86emuOp2_illegal_op,
+/* 0x44 */ x86emuOp2_illegal_op,
+/* 0x45 */ x86emuOp2_illegal_op,
+/* 0x46 */ x86emuOp2_illegal_op,
+/* 0x47 */ x86emuOp2_illegal_op,
+/* 0x48 */ x86emuOp2_illegal_op,
+/* 0x49 */ x86emuOp2_illegal_op,
+/* 0x4a */ x86emuOp2_illegal_op,
+/* 0x4b */ x86emuOp2_illegal_op,
+/* 0x4c */ x86emuOp2_illegal_op,
+/* 0x4d */ x86emuOp2_illegal_op,
+/* 0x4e */ x86emuOp2_illegal_op,
+/* 0x4f */ x86emuOp2_illegal_op,
+
+/* 0x50 */ x86emuOp2_illegal_op,
+/* 0x51 */ x86emuOp2_illegal_op,
+/* 0x52 */ x86emuOp2_illegal_op,
+/* 0x53 */ x86emuOp2_illegal_op,
+/* 0x54 */ x86emuOp2_illegal_op,
+/* 0x55 */ x86emuOp2_illegal_op,
+/* 0x56 */ x86emuOp2_illegal_op,
+/* 0x57 */ x86emuOp2_illegal_op,
+/* 0x58 */ x86emuOp2_illegal_op,
+/* 0x59 */ x86emuOp2_illegal_op,
+/* 0x5a */ x86emuOp2_illegal_op,
+/* 0x5b */ x86emuOp2_illegal_op,
+/* 0x5c */ x86emuOp2_illegal_op,
+/* 0x5d */ x86emuOp2_illegal_op,
+/* 0x5e */ x86emuOp2_illegal_op,
+/* 0x5f */ x86emuOp2_illegal_op,
+
+/* 0x60 */ x86emuOp2_illegal_op,
+/* 0x61 */ x86emuOp2_illegal_op,
+/* 0x62 */ x86emuOp2_illegal_op,
+/* 0x63 */ x86emuOp2_illegal_op,
+/* 0x64 */ x86emuOp2_illegal_op,
+/* 0x65 */ x86emuOp2_illegal_op,
+/* 0x66 */ x86emuOp2_illegal_op,
+/* 0x67 */ x86emuOp2_illegal_op,
+/* 0x68 */ x86emuOp2_illegal_op,
+/* 0x69 */ x86emuOp2_illegal_op,
+/* 0x6a */ x86emuOp2_illegal_op,
+/* 0x6b */ x86emuOp2_illegal_op,
+/* 0x6c */ x86emuOp2_illegal_op,
+/* 0x6d */ x86emuOp2_illegal_op,
+/* 0x6e */ x86emuOp2_illegal_op,
+/* 0x6f */ x86emuOp2_illegal_op,
+
+/* 0x70 */ x86emuOp2_illegal_op,
+/* 0x71 */ x86emuOp2_illegal_op,
+/* 0x72 */ x86emuOp2_illegal_op,
+/* 0x73 */ x86emuOp2_illegal_op,
+/* 0x74 */ x86emuOp2_illegal_op,
+/* 0x75 */ x86emuOp2_illegal_op,
+/* 0x76 */ x86emuOp2_illegal_op,
+/* 0x77 */ x86emuOp2_illegal_op,
+/* 0x78 */ x86emuOp2_illegal_op,
+/* 0x79 */ x86emuOp2_illegal_op,
+/* 0x7a */ x86emuOp2_illegal_op,
+/* 0x7b */ x86emuOp2_illegal_op,
+/* 0x7c */ x86emuOp2_illegal_op,
+/* 0x7d */ x86emuOp2_illegal_op,
+/* 0x7e */ x86emuOp2_illegal_op,
+/* 0x7f */ x86emuOp2_illegal_op,
+
+/* 0x80 */ x86emuOp2_long_jump,
+/* 0x81 */ x86emuOp2_long_jump,
+/* 0x82 */ x86emuOp2_long_jump,
+/* 0x83 */ x86emuOp2_long_jump,
+/* 0x84 */ x86emuOp2_long_jump,
+/* 0x85 */ x86emuOp2_long_jump,
+/* 0x86 */ x86emuOp2_long_jump,
+/* 0x87 */ x86emuOp2_long_jump,
+/* 0x88 */ x86emuOp2_long_jump,
+/* 0x89 */ x86emuOp2_long_jump,
+/* 0x8a */ x86emuOp2_long_jump,
+/* 0x8b */ x86emuOp2_long_jump,
+/* 0x8c */ x86emuOp2_long_jump,
+/* 0x8d */ x86emuOp2_long_jump,
+/* 0x8e */ x86emuOp2_long_jump,
+/* 0x8f */ x86emuOp2_long_jump,
+
+/* 0x90 */ x86emuOp2_set_byte,
+/* 0x91 */ x86emuOp2_set_byte,
+/* 0x92 */ x86emuOp2_set_byte,
+/* 0x93 */ x86emuOp2_set_byte,
+/* 0x94 */ x86emuOp2_set_byte,
+/* 0x95 */ x86emuOp2_set_byte,
+/* 0x96 */ x86emuOp2_set_byte,
+/* 0x97 */ x86emuOp2_set_byte,
+/* 0x98 */ x86emuOp2_set_byte,
+/* 0x99 */ x86emuOp2_set_byte,
+/* 0x9a */ x86emuOp2_set_byte,
+/* 0x9b */ x86emuOp2_set_byte,
+/* 0x9c */ x86emuOp2_set_byte,
+/* 0x9d */ x86emuOp2_set_byte,
+/* 0x9e */ x86emuOp2_set_byte,
+/* 0x9f */ x86emuOp2_set_byte,
+
+/* 0xa0 */ x86emuOp2_push_FS,
+/* 0xa1 */ x86emuOp2_pop_FS,
+/* 0xa2 */ x86emuOp2_illegal_op,
+/* 0xa3 */ x86emuOp2_bt_R,
+/* 0xa4 */ x86emuOp2_shld_IMM,
+/* 0xa5 */ x86emuOp2_shld_CL,
+/* 0xa6 */ x86emuOp2_illegal_op,
+/* 0xa7 */ x86emuOp2_illegal_op,
+/* 0xa8 */ x86emuOp2_push_GS,
+/* 0xa9 */ x86emuOp2_pop_GS,
+/* 0xaa */ x86emuOp2_illegal_op,
+/* 0xab */ x86emuOp2_bt_R,
+/* 0xac */ x86emuOp2_shrd_IMM,
+/* 0xad */ x86emuOp2_shrd_CL,
+/* 0xae */ x86emuOp2_illegal_op,
+/* 0xaf */ x86emuOp2_imul_R_RM,
+
+/* 0xb0 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */
+/* 0xb1 */ x86emuOp2_illegal_op, /* TODO: cmpxchg */
+/* 0xb2 */ x86emuOp2_lss_R_IMM,
+/* 0xb3 */ x86emuOp2_btr_R,
+/* 0xb4 */ x86emuOp2_lfs_R_IMM,
+/* 0xb5 */ x86emuOp2_lgs_R_IMM,
+/* 0xb6 */ x86emuOp2_movzx_byte_R_RM,
+/* 0xb7 */ x86emuOp2_movzx_word_R_RM,
+/* 0xb8 */ x86emuOp2_illegal_op,
+/* 0xb9 */ x86emuOp2_illegal_op,
+/* 0xba */ x86emuOp2_btX_I,
+/* 0xbb */ x86emuOp2_btc_R,
+/* 0xbc */ x86emuOp2_bsf,
+/* 0xbd */ x86emuOp2_bsr,
+/* 0xbe */ x86emuOp2_movsx_byte_R_RM,
+/* 0xbf */ x86emuOp2_movsx_word_R_RM,
+
+/* 0xc0 */ x86emuOp2_illegal_op, /* TODO: xadd */
+/* 0xc1 */ x86emuOp2_illegal_op, /* TODO: xadd */
+/* 0xc2 */ x86emuOp2_illegal_op,
+/* 0xc3 */ x86emuOp2_illegal_op,
+/* 0xc4 */ x86emuOp2_illegal_op,
+/* 0xc5 */ x86emuOp2_illegal_op,
+/* 0xc6 */ x86emuOp2_illegal_op,
+/* 0xc7 */ x86emuOp2_illegal_op,
+/* 0xc8 */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xc9 */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xca */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xcb */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xcc */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xcd */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xce */ x86emuOp2_illegal_op, /* TODO: bswap */
+/* 0xcf */ x86emuOp2_illegal_op, /* TODO: bswap */
+
+/* 0xd0 */ x86emuOp2_illegal_op,
+/* 0xd1 */ x86emuOp2_illegal_op,
+/* 0xd2 */ x86emuOp2_illegal_op,
+/* 0xd3 */ x86emuOp2_illegal_op,
+/* 0xd4 */ x86emuOp2_illegal_op,
+/* 0xd5 */ x86emuOp2_illegal_op,
+/* 0xd6 */ x86emuOp2_illegal_op,
+/* 0xd7 */ x86emuOp2_illegal_op,
+/* 0xd8 */ x86emuOp2_illegal_op,
+/* 0xd9 */ x86emuOp2_illegal_op,
+/* 0xda */ x86emuOp2_illegal_op,
+/* 0xdb */ x86emuOp2_illegal_op,
+/* 0xdc */ x86emuOp2_illegal_op,
+/* 0xdd */ x86emuOp2_illegal_op,
+/* 0xde */ x86emuOp2_illegal_op,
+/* 0xdf */ x86emuOp2_illegal_op,
+
+/* 0xe0 */ x86emuOp2_illegal_op,
+/* 0xe1 */ x86emuOp2_illegal_op,
+/* 0xe2 */ x86emuOp2_illegal_op,
+/* 0xe3 */ x86emuOp2_illegal_op,
+/* 0xe4 */ x86emuOp2_illegal_op,
+/* 0xe5 */ x86emuOp2_illegal_op,
+/* 0xe6 */ x86emuOp2_illegal_op,
+/* 0xe7 */ x86emuOp2_illegal_op,
+/* 0xe8 */ x86emuOp2_illegal_op,
+/* 0xe9 */ x86emuOp2_illegal_op,
+/* 0xea */ x86emuOp2_illegal_op,
+/* 0xeb */ x86emuOp2_illegal_op,
+/* 0xec */ x86emuOp2_illegal_op,
+/* 0xed */ x86emuOp2_illegal_op,
+/* 0xee */ x86emuOp2_illegal_op,
+/* 0xef */ x86emuOp2_illegal_op,
+
+/* 0xf0 */ x86emuOp2_illegal_op,
+/* 0xf1 */ x86emuOp2_illegal_op,
+/* 0xf2 */ x86emuOp2_illegal_op,
+/* 0xf3 */ x86emuOp2_illegal_op,
+/* 0xf4 */ x86emuOp2_illegal_op,
+/* 0xf5 */ x86emuOp2_illegal_op,
+/* 0xf6 */ x86emuOp2_illegal_op,
+/* 0xf7 */ x86emuOp2_illegal_op,
+/* 0xf8 */ x86emuOp2_illegal_op,
+/* 0xf9 */ x86emuOp2_illegal_op,
+/* 0xfa */ x86emuOp2_illegal_op,
+/* 0xfb */ x86emuOp2_illegal_op,
+/* 0xfc */ x86emuOp2_illegal_op,
+/* 0xfd */ x86emuOp2_illegal_op,
+/* 0xfe */ x86emuOp2_illegal_op,
+/* 0xff */ x86emuOp2_illegal_op,
+};
diff --git a/drivers/bios_emulator/x86emu/prim_ops.c b/drivers/bios_emulator/x86emu/prim_ops.c
new file mode 100644
index 0000000..dc8cea8
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/prim_ops.c
@@ -0,0 +1,2446 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file contains the code to implement the primitive
+* machine operations used by the emulation code in ops.c
+*
+* Carry Chain Calculation
+*
+* This represents a somewhat expensive calculation which is
+* apparently required to emulate the setting of the OF343364 and AF flag.
+* The latter is not so important, but the former is. The overflow
+* flag is the XOR of the top two bits of the carry chain for an
+* addition (similar for subtraction). Since we do not want to
+* simulate the addition in a bitwise manner, we try to calculate the
+* carry chain given the two operands and the result.
+*
+* So, given the following table, which represents the addition of two
+* bits, we can derive a formula for the carry chain.
+*
+* a b cin r cout
+* 0 0 0 0 0
+* 0 0 1 1 0
+* 0 1 0 1 0
+* 0 1 1 0 1
+* 1 0 0 1 0
+* 1 0 1 0 1
+* 1 1 0 0 1
+* 1 1 1 1 1
+*
+* Construction of table for cout:
+*
+* ab
+* r \ 00 01 11 10
+* |------------------
+* 0 | 0 1 1 1
+* 1 | 0 0 1 0
+*
+* By inspection, one gets: cc = ab + r'(a + b)
+*
+* That represents alot of operations, but NO CHOICE....
+*
+* Borrow Chain Calculation.
+*
+* The following table represents the subtraction of two bits, from
+* which we can derive a formula for the borrow chain.
+*
+* a b bin r bout
+* 0 0 0 0 0
+* 0 0 1 1 1
+* 0 1 0 1 1
+* 0 1 1 0 1
+* 1 0 0 1 0
+* 1 0 1 0 0
+* 1 1 0 0 0
+* 1 1 1 1 1
+*
+* Construction of table for cout:
+*
+* ab
+* r \ 00 01 11 10
+* |------------------
+* 0 | 0 1 0 0
+* 1 | 1 1 1 0
+*
+* By inspection, one gets: bc = a'b + r(a' + b)
+*
+****************************************************************************/
+
+#define PRIM_OPS_NO_REDEFINE_ASM
+#include "x86emu/x86emui.h"
+
+/*------------------------- Global Variables ------------------------------*/
+
+static u32 x86emu_parity_tab[8] =
+{
+ 0x96696996,
+ 0x69969669,
+ 0x69969669,
+ 0x96696996,
+ 0x69969669,
+ 0x96696996,
+ 0x96696996,
+ 0x69969669,
+};
+
+#define PARITY(x) (((x86emu_parity_tab[(x) / 32] >> ((x) % 32)) & 1) == 0)
+#define XOR2(x) (((x) ^ ((x)>>1)) & 0x1)
+/*----------------------------- Implementation ----------------------------*/
+int abs(int v)
+{
+ return (v>0)?v:-v;
+}
+
+/*----------------------------- Implementation ----------------------------*/
+
+
+/*--------- Side effects helper functions -------*/
+
+/****************************************************************************
+REMARKS:
+implements side efects for byte operations that don't overflow
+****************************************************************************/
+
+static void set_parity_flag(u32 res)
+{
+ CONDITIONAL_SET_FLAG(PARITY(res & 0xFF), F_PF);
+}
+
+static void set_szp_flags_8(u8 res)
+{
+ CONDITIONAL_SET_FLAG(res & 0x80, F_SF);
+ CONDITIONAL_SET_FLAG(res == 0, F_ZF);
+ set_parity_flag(res);
+}
+
+static void set_szp_flags_16(u16 res)
+{
+ CONDITIONAL_SET_FLAG(res & 0x8000, F_SF);
+ CONDITIONAL_SET_FLAG(res == 0, F_ZF);
+ set_parity_flag(res);
+}
+
+static void set_szp_flags_32(u32 res)
+{
+ CONDITIONAL_SET_FLAG(res & 0x80000000, F_SF);
+ CONDITIONAL_SET_FLAG(res == 0, F_ZF);
+ set_parity_flag(res);
+}
+
+static void no_carry_byte_side_eff(u8 res)
+{
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ set_szp_flags_8(res);
+}
+
+static void no_carry_word_side_eff(u16 res)
+{
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ set_szp_flags_16(res);
+}
+
+static void no_carry_long_side_eff(u32 res)
+{
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ set_szp_flags_32(res);
+}
+
+static void calc_carry_chain(int bits, u32 d, u32 s, u32 res, int set_carry)
+{
+ u32 cc;
+
+ cc = (s & d) | ((~res) & (s | d));
+ CONDITIONAL_SET_FLAG(XOR2(cc >> (bits - 2)), F_OF);
+ CONDITIONAL_SET_FLAG(cc & 0x8, F_AF);
+ if (set_carry) {
+ CONDITIONAL_SET_FLAG(res & (1 << bits), F_CF);
+ }
+}
+
+static void calc_borrow_chain(int bits, u32 d, u32 s, u32 res, int set_carry)
+{
+ u32 bc;
+
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> (bits - 2)), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ if (set_carry) {
+ CONDITIONAL_SET_FLAG(bc & (1 << (bits - 1)), F_CF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AAA instruction and side effects.
+****************************************************************************/
+u16 aaa_word(u16 d)
+{
+ u16 res;
+ if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
+ d += 0x6;
+ d += 0x100;
+ SET_FLAG(F_AF);
+ SET_FLAG(F_CF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ }
+ res = (u16)(d & 0xFF0F);
+ set_szp_flags_16(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AAA instruction and side effects.
+****************************************************************************/
+u16 aas_word(u16 d)
+{
+ u16 res;
+ if ((d & 0xf) > 0x9 || ACCESS_FLAG(F_AF)) {
+ d -= 0x6;
+ d -= 0x100;
+ SET_FLAG(F_AF);
+ SET_FLAG(F_CF);
+ } else {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ }
+ res = (u16)(d & 0xFF0F);
+ set_szp_flags_16(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AAD instruction and side effects.
+****************************************************************************/
+u16 aad_word(u16 d)
+{
+ u16 l;
+ u8 hb, lb;
+
+ hb = (u8)((d >> 8) & 0xff);
+ lb = (u8)((d & 0xff));
+ l = (u16)((lb + 10 * hb) & 0xFF);
+
+ no_carry_byte_side_eff(l & 0xFF);
+ return l;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AAM instruction and side effects.
+****************************************************************************/
+u16 aam_word(u8 d)
+{
+ u16 h, l;
+
+ h = (u16)(d / 10);
+ l = (u16)(d % 10);
+ l |= (u16)(h << 8);
+
+ no_carry_byte_side_eff(l & 0xFF);
+ return l;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADC instruction and side effects.
+****************************************************************************/
+u8 adc_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + s;
+ if (ACCESS_FLAG(F_CF)) res++;
+
+ set_szp_flags_8(res);
+ calc_carry_chain(8,s,d,res,1);
+
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADC instruction and side effects.
+****************************************************************************/
+u16 adc_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + s;
+ if (ACCESS_FLAG(F_CF))
+ res++;
+
+ set_szp_flags_16((u16)res);
+ calc_carry_chain(16,s,d,res,1);
+
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADC instruction and side effects.
+****************************************************************************/
+u32 adc_long(u32 d, u32 s)
+{
+ u32 lo; /* all operands in native machine order */
+ u32 hi;
+ u32 res;
+
+ lo = (d & 0xFFFF) + (s & 0xFFFF);
+ res = d + s;
+
+ if (ACCESS_FLAG(F_CF)) {
+ lo++;
+ res++;
+ }
+
+ hi = (lo >> 16) + (d >> 16) + (s >> 16);
+
+ set_szp_flags_32(res);
+ calc_carry_chain(32,s,d,res,0);
+
+ CONDITIONAL_SET_FLAG(hi & 0x10000, F_CF);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADD instruction and side effects.
+****************************************************************************/
+u8 add_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + s;
+ set_szp_flags_8((u8)res);
+ calc_carry_chain(8,s,d,res,1);
+
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADD instruction and side effects.
+****************************************************************************/
+u16 add_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + s;
+ set_szp_flags_16((u16)res);
+ calc_carry_chain(16,s,d,res,1);
+
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ADD instruction and side effects.
+****************************************************************************/
+u32 add_long(u32 d, u32 s)
+{
+ u32 res;
+
+ res = d + s;
+ set_szp_flags_32(res);
+ calc_carry_chain(32,s,d,res,0);
+
+ CONDITIONAL_SET_FLAG(res < d || res < s, F_CF);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AND instruction and side effects.
+****************************************************************************/
+u8 and_byte(u8 d, u8 s)
+{
+ u8 res; /* all operands in native machine order */
+
+ res = d & s;
+
+ no_carry_byte_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AND instruction and side effects.
+****************************************************************************/
+u16 and_word(u16 d, u16 s)
+{
+ u16 res; /* all operands in native machine order */
+
+ res = d & s;
+
+ no_carry_word_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the AND instruction and side effects.
+****************************************************************************/
+u32 and_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d & s;
+ no_carry_long_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the CMP instruction and side effects.
+****************************************************************************/
+u8 cmp_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - s;
+ set_szp_flags_8((u8)res);
+ calc_borrow_chain(8, d, s, res, 1);
+
+ return d;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the CMP instruction and side effects.
+****************************************************************************/
+u16 cmp_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - s;
+ set_szp_flags_16((u16)res);
+ calc_borrow_chain(16, d, s, res, 1);
+
+ return d;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the CMP instruction and side effects.
+****************************************************************************/
+u32 cmp_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - s;
+ set_szp_flags_32(res);
+ calc_borrow_chain(32, d, s, res, 1);
+
+ return d;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DAA instruction and side effects.
+****************************************************************************/
+u8 daa_byte(u8 d)
+{
+ u32 res = d;
+ if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
+ res += 6;
+ SET_FLAG(F_AF);
+ }
+ if (res > 0x9F || ACCESS_FLAG(F_CF)) {
+ res += 0x60;
+ SET_FLAG(F_CF);
+ }
+ set_szp_flags_8((u8)res);
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DAS instruction and side effects.
+****************************************************************************/
+u8 das_byte(u8 d)
+{
+ if ((d & 0xf) > 9 || ACCESS_FLAG(F_AF)) {
+ d -= 6;
+ SET_FLAG(F_AF);
+ }
+ if (d > 0x9F || ACCESS_FLAG(F_CF)) {
+ d -= 0x60;
+ SET_FLAG(F_CF);
+ }
+ set_szp_flags_8(d);
+ return d;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DEC instruction and side effects.
+****************************************************************************/
+u8 dec_byte(u8 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - 1;
+ set_szp_flags_8((u8)res);
+ calc_borrow_chain(8, d, 1, res, 0);
+
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DEC instruction and side effects.
+****************************************************************************/
+u16 dec_word(u16 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - 1;
+ set_szp_flags_16((u16)res);
+ calc_borrow_chain(16, d, 1, res, 0);
+
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DEC instruction and side effects.
+****************************************************************************/
+u32 dec_long(u32 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d - 1;
+
+ set_szp_flags_32(res);
+ calc_borrow_chain(32, d, 1, res, 0);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the INC instruction and side effects.
+****************************************************************************/
+u8 inc_byte(u8 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + 1;
+ set_szp_flags_8((u8)res);
+ calc_carry_chain(8, d, 1, res, 0);
+
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the INC instruction and side effects.
+****************************************************************************/
+u16 inc_word(u16 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + 1;
+ set_szp_flags_16((u16)res);
+ calc_carry_chain(16, d, 1, res, 0);
+
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the INC instruction and side effects.
+****************************************************************************/
+u32 inc_long(u32 d)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d + 1;
+ set_szp_flags_32(res);
+ calc_carry_chain(32, d, 1, res, 0);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u8 or_byte(u8 d, u8 s)
+{
+ u8 res; /* all operands in native machine order */
+
+ res = d | s;
+ no_carry_byte_side_eff(res);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u16 or_word(u16 d, u16 s)
+{
+ u16 res; /* all operands in native machine order */
+
+ res = d | s;
+ no_carry_word_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u32 or_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d | s;
+ no_carry_long_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u8 neg_byte(u8 s)
+{
+ u8 res;
+
+ CONDITIONAL_SET_FLAG(s != 0, F_CF);
+ res = (u8)-s;
+ set_szp_flags_8(res);
+ calc_borrow_chain(8, 0, s, res, 0);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u16 neg_word(u16 s)
+{
+ u16 res;
+
+ CONDITIONAL_SET_FLAG(s != 0, F_CF);
+ res = (u16)-s;
+ set_szp_flags_16((u16)res);
+ calc_borrow_chain(16, 0, s, res, 0);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OR instruction and side effects.
+****************************************************************************/
+u32 neg_long(u32 s)
+{
+ u32 res;
+
+ CONDITIONAL_SET_FLAG(s != 0, F_CF);
+ res = (u32)-s;
+ set_szp_flags_32(res);
+ calc_borrow_chain(32, 0, s, res, 0);
+
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the NOT instruction and side effects.
+****************************************************************************/
+u8 not_byte(u8 s)
+{
+ return ~s;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the NOT instruction and side effects.
+****************************************************************************/
+u16 not_word(u16 s)
+{
+ return ~s;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the NOT instruction and side effects.
+****************************************************************************/
+u32 not_long(u32 s)
+{
+ return ~s;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCL instruction and side effects.
+****************************************************************************/
+u8 rcl_byte(u8 d, u8 s)
+{
+ unsigned int res, cnt, mask, cf;
+
+ /* s is the rotate distance. It varies from 0 - 8. */
+ /* have
+
+ CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
+
+ want to rotate through the carry by "s" bits. We could
+ loop, but that's inefficient. So the width is 9,
+ and we split into three parts:
+
+ The new carry flag (was B_n)
+ the stuff in B_n-1 .. B_0
+ the stuff in B_7 .. B_n+1
+
+ The new rotate is done mod 9, and given this,
+ for a rotation of n bits (mod 9) the new carry flag is
+ then located n bits from the MSB. The low part is
+ then shifted up cnt bits, and the high part is or'd
+ in. Using CAPS for new values, and lowercase for the
+ original values, this can be expressed as:
+
+ IF n > 0
+ 1) CF <- b_(8-n)
+ 2) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0
+ 3) B_(n-1) <- cf
+ 4) B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1))
+ */
+ res = d;
+ if ((cnt = s % 9) != 0) {
+ /* extract the new CARRY FLAG. */
+ /* CF <- b_(8-n) */
+ cf = (d >> (8 - cnt)) & 0x1;
+
+ /* get the low stuff which rotated
+ into the range B_7 .. B_cnt */
+ /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_0 */
+ /* note that the right hand side done by the mask */
+ res = (d << cnt) & 0xff;
+
+ /* now the high stuff which rotated around
+ into the positions B_cnt-2 .. B_0 */
+ /* B_(n-2) .. B_0 <- b_7 .. b_(8-(n-1)) */
+ /* shift it downward, 7-(n-2) = 9-n positions.
+ and mask off the result before or'ing in.
+ */
+ mask = (1 << (cnt - 1)) - 1;
+ res |= (d >> (9 - cnt)) & mask;
+
+ /* if the carry flag was set, or it in. */
+ if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
+ /* B_(n-1) <- cf */
+ res |= 1 << (cnt - 1);
+ }
+ /* set the new carry flag, based on the variable "cf" */
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ /* OVERFLOW is set *IFF* cnt==1, then it is the
+ xor of CF and the most significant bit. Blecck. */
+ /* parenthesized this expression since it appears to
+ be causing OF to be misset */
+ CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 6) & 0x2)),
+ F_OF);
+
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCL instruction and side effects.
+****************************************************************************/
+u16 rcl_word(u16 d, u8 s)
+{
+ unsigned int res, cnt, mask, cf;
+
+ res = d;
+ if ((cnt = s % 17) != 0) {
+ cf = (d >> (16 - cnt)) & 0x1;
+ res = (d << cnt) & 0xffff;
+ mask = (1 << (cnt - 1)) - 1;
+ res |= (d >> (17 - cnt)) & mask;
+ if (ACCESS_FLAG(F_CF)) {
+ res |= 1 << (cnt - 1);
+ }
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 14) & 0x2)),
+ F_OF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCL instruction and side effects.
+****************************************************************************/
+u32 rcl_long(u32 d, u8 s)
+{
+ u32 res, cnt, mask, cf;
+
+ res = d;
+ if ((cnt = s % 33) != 0) {
+ cf = (d >> (32 - cnt)) & 0x1;
+ res = (d << cnt) & 0xffffffff;
+ mask = (1 << (cnt - 1)) - 1;
+ res |= (d >> (33 - cnt)) & mask;
+ if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
+ res |= 1 << (cnt - 1);
+ }
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ CONDITIONAL_SET_FLAG(cnt == 1 && XOR2(cf + ((res >> 30) & 0x2)),
+ F_OF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCR instruction and side effects.
+****************************************************************************/
+u8 rcr_byte(u8 d, u8 s)
+{
+ u32 res, cnt;
+ u32 mask, cf, ocf = 0;
+
+ /* rotate right through carry */
+ /*
+ s is the rotate distance. It varies from 0 - 8.
+ d is the byte object rotated.
+
+ have
+
+ CF B_7 B_6 B_5 B_4 B_3 B_2 B_1 B_0
+
+ The new rotate is done mod 9, and given this,
+ for a rotation of n bits (mod 9) the new carry flag is
+ then located n bits from the LSB. The low part is
+ then shifted up cnt bits, and the high part is or'd
+ in. Using CAPS for new values, and lowercase for the
+ original values, this can be expressed as:
+
+ IF n > 0
+ 1) CF <- b_(n-1)
+ 2) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n)
+ 3) B_(8-n) <- cf
+ 4) B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0)
+ */
+ res = d;
+ if ((cnt = s % 9) != 0) {
+ /* extract the new CARRY FLAG. */
+ /* CF <- b_(n-1) */
+ if (cnt == 1) {
+ cf = d & 0x1;
+ /* note hackery here. Access_flag(..) evaluates to either
+ 0 if flag not set
+ non-zero if flag is set.
+ doing access_flag(..) != 0 casts that into either
+ 0..1 in any representation of the flags register
+ (i.e. packed bit array or unpacked.)
+ */
+ ocf = ACCESS_FLAG(F_CF) != 0;
+ } else
+ cf = (d >> (cnt - 1)) & 0x1;
+
+ /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_n */
+ /* note that the right hand side done by the mask
+ This is effectively done by shifting the
+ object to the right. The result must be masked,
+ in case the object came in and was treated
+ as a negative number. Needed??? */
+
+ mask = (1 << (8 - cnt)) - 1;
+ res = (d >> cnt) & mask;
+
+ /* now the high stuff which rotated around
+ into the positions B_cnt-2 .. B_0 */
+ /* B_(7) .. B_(8-(n-1)) <- b_(n-2) .. b_(0) */
+ /* shift it downward, 7-(n-2) = 9-n positions.
+ and mask off the result before or'ing in.
+ */
+ res |= (d << (9 - cnt));
+
+ /* if the carry flag was set, or it in. */
+ if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
+ /* B_(8-n) <- cf */
+ res |= 1 << (8 - cnt);
+ }
+ /* set the new carry flag, based on the variable "cf" */
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ /* OVERFLOW is set *IFF* cnt==1, then it is the
+ xor of CF and the most significant bit. Blecck. */
+ /* parenthesized... */
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 6) & 0x2)),
+ F_OF);
+ }
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCR instruction and side effects.
+****************************************************************************/
+u16 rcr_word(u16 d, u8 s)
+{
+ u32 res, cnt;
+ u32 mask, cf, ocf = 0;
+
+ /* rotate right through carry */
+ res = d;
+ if ((cnt = s % 17) != 0) {
+ if (cnt == 1) {
+ cf = d & 0x1;
+ ocf = ACCESS_FLAG(F_CF) != 0;
+ } else
+ cf = (d >> (cnt - 1)) & 0x1;
+ mask = (1 << (16 - cnt)) - 1;
+ res = (d >> cnt) & mask;
+ res |= (d << (17 - cnt));
+ if (ACCESS_FLAG(F_CF)) {
+ res |= 1 << (16 - cnt);
+ }
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 14) & 0x2)),
+ F_OF);
+ }
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the RCR instruction and side effects.
+****************************************************************************/
+u32 rcr_long(u32 d, u8 s)
+{
+ u32 res, cnt;
+ u32 mask, cf, ocf = 0;
+
+ /* rotate right through carry */
+ res = d;
+ if ((cnt = s % 33) != 0) {
+ if (cnt == 1) {
+ cf = d & 0x1;
+ ocf = ACCESS_FLAG(F_CF) != 0;
+ } else
+ cf = (d >> (cnt - 1)) & 0x1;
+ mask = (1 << (32 - cnt)) - 1;
+ res = (d >> cnt) & mask;
+ if (cnt != 1)
+ res |= (d << (33 - cnt));
+ if (ACCESS_FLAG(F_CF)) { /* carry flag is set */
+ res |= 1 << (32 - cnt);
+ }
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(ocf + ((d >> 30) & 0x2)),
+ F_OF);
+ }
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROL instruction and side effects.
+****************************************************************************/
+u8 rol_byte(u8 d, u8 s)
+{
+ unsigned int res, cnt, mask;
+
+ /* rotate left */
+ /*
+ s is the rotate distance. It varies from 0 - 8.
+ d is the byte object rotated.
+
+ have
+
+ CF B_7 ... B_0
+
+ The new rotate is done mod 8.
+ Much simpler than the "rcl" or "rcr" operations.
+
+ IF n > 0
+ 1) B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0)
+ 2) B_(n-1) .. B_(0) <- b_(7) .. b_(8-n)
+ */
+ res = d;
+ if ((cnt = s % 8) != 0) {
+ /* B_(7) .. B_(n) <- b_(8-(n+1)) .. b_(0) */
+ res = (d << cnt);
+
+ /* B_(n-1) .. B_(0) <- b_(7) .. b_(8-n) */
+ mask = (1 << cnt) - 1;
+ res |= (d >> (8 - cnt)) & mask;
+
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ /* OVERFLOW is set *IFF* s==1, then it is the
+ xor of CF and the most significant bit. Blecck. */
+ CONDITIONAL_SET_FLAG(s == 1 &&
+ XOR2((res & 0x1) + ((res >> 6) & 0x2)),
+ F_OF);
+ } if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROL instruction and side effects.
+****************************************************************************/
+u16 rol_word(u16 d, u8 s)
+{
+ unsigned int res, cnt, mask;
+
+ res = d;
+ if ((cnt = s % 16) != 0) {
+ res = (d << cnt);
+ mask = (1 << cnt) - 1;
+ res |= (d >> (16 - cnt)) & mask;
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ CONDITIONAL_SET_FLAG(s == 1 &&
+ XOR2((res & 0x1) + ((res >> 14) & 0x2)),
+ F_OF);
+ } if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROL instruction and side effects.
+****************************************************************************/
+u32 rol_long(u32 d, u8 s)
+{
+ u32 res, cnt, mask;
+
+ res = d;
+ if ((cnt = s % 32) != 0) {
+ res = (d << cnt);
+ mask = (1 << cnt) - 1;
+ res |= (d >> (32 - cnt)) & mask;
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ CONDITIONAL_SET_FLAG(s == 1 &&
+ XOR2((res & 0x1) + ((res >> 30) & 0x2)),
+ F_OF);
+ } if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x1, F_CF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROR instruction and side effects.
+****************************************************************************/
+u8 ror_byte(u8 d, u8 s)
+{
+ unsigned int res, cnt, mask;
+
+ /* rotate right */
+ /*
+ s is the rotate distance. It varies from 0 - 8.
+ d is the byte object rotated.
+
+ have
+
+ B_7 ... B_0
+
+ The rotate is done mod 8.
+
+ IF n > 0
+ 1) B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n)
+ 2) B_(7) .. B_(8-n) <- b_(n-1) .. b_(0)
+ */
+ res = d;
+ if ((cnt = s % 8) != 0) { /* not a typo, do nada if cnt==0 */
+ /* B_(7) .. B_(8-n) <- b_(n-1) .. b_(0) */
+ res = (d << (8 - cnt));
+
+ /* B_(8-(n+1)) .. B_(0) <- b_(7) .. b_(n) */
+ mask = (1 << (8 - cnt)) - 1;
+ res |= (d >> (cnt)) & mask;
+
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
+ /* OVERFLOW is set *IFF* s==1, then it is the
+ xor of the two most significant bits. Blecck. */
+ CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 6), F_OF);
+ } else if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x80, F_CF);
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROR instruction and side effects.
+****************************************************************************/
+u16 ror_word(u16 d, u8 s)
+{
+ unsigned int res, cnt, mask;
+
+ res = d;
+ if ((cnt = s % 16) != 0) {
+ res = (d << (16 - cnt));
+ mask = (1 << (16 - cnt)) - 1;
+ res |= (d >> (cnt)) & mask;
+ CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
+ CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 14), F_OF);
+ } else if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x8000, F_CF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the ROR instruction and side effects.
+****************************************************************************/
+u32 ror_long(u32 d, u8 s)
+{
+ u32 res, cnt, mask;
+
+ res = d;
+ if ((cnt = s % 32) != 0) {
+ res = (d << (32 - cnt));
+ mask = (1 << (32 - cnt)) - 1;
+ res |= (d >> (cnt)) & mask;
+ CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
+ CONDITIONAL_SET_FLAG(s == 1 && XOR2(res >> 30), F_OF);
+ } else if (s != 0) {
+ /* set the new carry flag, Note that it is the low order
+ bit of the result!!! */
+ CONDITIONAL_SET_FLAG(res & 0x80000000, F_CF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHL instruction and side effects.
+****************************************************************************/
+u8 shl_byte(u8 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 8) {
+ cnt = s % 8;
+
+ /* last bit shifted out goes into carry flag */
+ if (cnt > 0) {
+ res = d << cnt;
+ cf = d & (1 << (8 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_8((u8)res);
+ } else {
+ res = (u8) d;
+ }
+
+ if (cnt == 1) {
+ /* Needs simplification. */
+ CONDITIONAL_SET_FLAG(
+ (((res & 0x80) == 0x80) ^
+ (ACCESS_FLAG(F_CF) != 0)),
+ /* was (M.x86.R_FLG&F_CF)==F_CF)), */
+ F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHL instruction and side effects.
+****************************************************************************/
+u16 shl_word(u16 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 16) {
+ cnt = s % 16;
+ if (cnt > 0) {
+ res = d << cnt;
+ cf = d & (1 << (16 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_16((u16)res);
+ } else {
+ res = (u16) d;
+ }
+
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(
+ (((res & 0x8000) == 0x8000) ^
+ (ACCESS_FLAG(F_CF) != 0)),
+ F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHL instruction and side effects.
+****************************************************************************/
+u32 shl_long(u32 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 32) {
+ cnt = s % 32;
+ if (cnt > 0) {
+ res = d << cnt;
+ cf = d & (1 << (32 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_32((u32)res);
+ } else {
+ res = d;
+ }
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
+ (ACCESS_FLAG(F_CF) != 0)), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHR instruction and side effects.
+****************************************************************************/
+u8 shr_byte(u8 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 8) {
+ cnt = s % 8;
+ if (cnt > 0) {
+ cf = d & (1 << (cnt - 1));
+ res = d >> cnt;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_8((u8)res);
+ } else {
+ res = (u8) d;
+ }
+
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(res >> 6), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d >> (s-1)) & 0x1, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHR instruction and side effects.
+****************************************************************************/
+u16 shr_word(u16 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 16) {
+ cnt = s % 16;
+ if (cnt > 0) {
+ cf = d & (1 << (cnt - 1));
+ res = d >> cnt;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_16((u16)res);
+ } else {
+ res = d;
+ }
+
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHR instruction and side effects.
+****************************************************************************/
+u32 shr_long(u32 d, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 32) {
+ cnt = s % 32;
+ if (cnt > 0) {
+ cf = d & (1 << (cnt - 1));
+ res = d >> cnt;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_32((u32)res);
+ } else {
+ res = d;
+ }
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SAR instruction and side effects.
+****************************************************************************/
+u8 sar_byte(u8 d, u8 s)
+{
+ unsigned int cnt, res, cf, mask, sf;
+
+ res = d;
+ sf = d & 0x80;
+ cnt = s % 8;
+ if (cnt > 0 && cnt < 8) {
+ mask = (1 << (8 - cnt)) - 1;
+ cf = d & (1 << (cnt - 1));
+ res = (d >> cnt) & mask;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ if (sf) {
+ res |= ~mask;
+ }
+ set_szp_flags_8((u8)res);
+ } else if (cnt >= 8) {
+ if (sf) {
+ res = 0xff;
+ SET_FLAG(F_CF);
+ CLEAR_FLAG(F_ZF);
+ SET_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ }
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SAR instruction and side effects.
+****************************************************************************/
+u16 sar_word(u16 d, u8 s)
+{
+ unsigned int cnt, res, cf, mask, sf;
+
+ sf = d & 0x8000;
+ cnt = s % 16;
+ res = d;
+ if (cnt > 0 && cnt < 16) {
+ mask = (1 << (16 - cnt)) - 1;
+ cf = d & (1 << (cnt - 1));
+ res = (d >> cnt) & mask;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ if (sf) {
+ res |= ~mask;
+ }
+ set_szp_flags_16((u16)res);
+ } else if (cnt >= 16) {
+ if (sf) {
+ res = 0xffff;
+ SET_FLAG(F_CF);
+ CLEAR_FLAG(F_ZF);
+ SET_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SAR instruction and side effects.
+****************************************************************************/
+u32 sar_long(u32 d, u8 s)
+{
+ u32 cnt, res, cf, mask, sf;
+
+ sf = d & 0x80000000;
+ cnt = s % 32;
+ res = d;
+ if (cnt > 0 && cnt < 32) {
+ mask = (1 << (32 - cnt)) - 1;
+ cf = d & (1 << (cnt - 1));
+ res = (d >> cnt) & mask;
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ if (sf) {
+ res |= ~mask;
+ }
+ set_szp_flags_32(res);
+ } else if (cnt >= 32) {
+ if (sf) {
+ res = 0xffffffff;
+ SET_FLAG(F_CF);
+ CLEAR_FLAG(F_ZF);
+ SET_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHLD instruction and side effects.
+****************************************************************************/
+u16 shld_word (u16 d, u16 fill, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 16) {
+ cnt = s % 16;
+ if (cnt > 0) {
+ res = (d << cnt) | (fill >> (16-cnt));
+ cf = d & (1 << (16 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_16((u16)res);
+ } else {
+ res = d;
+ }
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG((((res & 0x8000) == 0x8000) ^
+ (ACCESS_FLAG(F_CF) != 0)), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d << (s-1)) & 0x8000, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHLD instruction and side effects.
+****************************************************************************/
+u32 shld_long (u32 d, u32 fill, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 32) {
+ cnt = s % 32;
+ if (cnt > 0) {
+ res = (d << cnt) | (fill >> (32-cnt));
+ cf = d & (1 << (32 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_32((u32)res);
+ } else {
+ res = d;
+ }
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG((((res & 0x80000000) == 0x80000000) ^
+ (ACCESS_FLAG(F_CF) != 0)), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CONDITIONAL_SET_FLAG((d << (s-1)) & 0x80000000, F_CF);
+ CLEAR_FLAG(F_OF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_PF);
+ SET_FLAG(F_ZF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHRD instruction and side effects.
+****************************************************************************/
+u16 shrd_word (u16 d, u16 fill, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 16) {
+ cnt = s % 16;
+ if (cnt > 0) {
+ cf = d & (1 << (cnt - 1));
+ res = (d >> cnt) | (fill << (16 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_16((u16)res);
+ } else {
+ res = d;
+ }
+
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(res >> 14), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SHRD instruction and side effects.
+****************************************************************************/
+u32 shrd_long (u32 d, u32 fill, u8 s)
+{
+ unsigned int cnt, res, cf;
+
+ if (s < 32) {
+ cnt = s % 32;
+ if (cnt > 0) {
+ cf = d & (1 << (cnt - 1));
+ res = (d >> cnt) | (fill << (32 - cnt));
+ CONDITIONAL_SET_FLAG(cf, F_CF);
+ set_szp_flags_32((u32)res);
+ } else {
+ res = d;
+ }
+ if (cnt == 1) {
+ CONDITIONAL_SET_FLAG(XOR2(res >> 30), F_OF);
+ } else {
+ CLEAR_FLAG(F_OF);
+ }
+ } else {
+ res = 0;
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ SET_FLAG(F_ZF);
+ CLEAR_FLAG(F_SF);
+ CLEAR_FLAG(F_PF);
+ }
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SBB instruction and side effects.
+****************************************************************************/
+u8 sbb_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ if (ACCESS_FLAG(F_CF))
+ res = d - s - 1;
+ else
+ res = d - s;
+ set_szp_flags_8((u8)res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SBB instruction and side effects.
+****************************************************************************/
+u16 sbb_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ if (ACCESS_FLAG(F_CF))
+ res = d - s - 1;
+ else
+ res = d - s;
+ set_szp_flags_16((u16)res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SBB instruction and side effects.
+****************************************************************************/
+u32 sbb_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ if (ACCESS_FLAG(F_CF))
+ res = d - s - 1;
+ else
+ res = d - s;
+
+ set_szp_flags_32(res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SUB instruction and side effects.
+****************************************************************************/
+u8 sub_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ res = d - s;
+ set_szp_flags_8((u8)res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x80, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 6), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return (u8)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SUB instruction and side effects.
+****************************************************************************/
+u16 sub_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ res = d - s;
+ set_szp_flags_16((u16)res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x8000, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 14), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return (u16)res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the SUB instruction and side effects.
+****************************************************************************/
+u32 sub_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+ u32 bc;
+
+ res = d - s;
+ set_szp_flags_32(res);
+
+ /* calculate the borrow chain. See note at top */
+ bc = (res & (~d | s)) | (~d & s);
+ CONDITIONAL_SET_FLAG(bc & 0x80000000, F_CF);
+ CONDITIONAL_SET_FLAG(XOR2(bc >> 30), F_OF);
+ CONDITIONAL_SET_FLAG(bc & 0x8, F_AF);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the TEST instruction and side effects.
+****************************************************************************/
+void test_byte(u8 d, u8 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d & s;
+
+ CLEAR_FLAG(F_OF);
+ set_szp_flags_8((u8)res);
+ /* AF == dont care */
+ CLEAR_FLAG(F_CF);
+}
+
+/****************************************************************************
+REMARKS:
+Implements the TEST instruction and side effects.
+****************************************************************************/
+void test_word(u16 d, u16 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d & s;
+
+ CLEAR_FLAG(F_OF);
+ set_szp_flags_16((u16)res);
+ /* AF == dont care */
+ CLEAR_FLAG(F_CF);
+}
+
+/****************************************************************************
+REMARKS:
+Implements the TEST instruction and side effects.
+****************************************************************************/
+void test_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d & s;
+
+ CLEAR_FLAG(F_OF);
+ set_szp_flags_32(res);
+ /* AF == dont care */
+ CLEAR_FLAG(F_CF);
+}
+
+/****************************************************************************
+REMARKS:
+Implements the XOR instruction and side effects.
+****************************************************************************/
+u8 xor_byte(u8 d, u8 s)
+{
+ u8 res; /* all operands in native machine order */
+
+ res = d ^ s;
+ no_carry_byte_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the XOR instruction and side effects.
+****************************************************************************/
+u16 xor_word(u16 d, u16 s)
+{
+ u16 res; /* all operands in native machine order */
+
+ res = d ^ s;
+ no_carry_word_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the XOR instruction and side effects.
+****************************************************************************/
+u32 xor_long(u32 d, u32 s)
+{
+ u32 res; /* all operands in native machine order */
+
+ res = d ^ s;
+ no_carry_long_side_eff(res);
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IMUL instruction and side effects.
+****************************************************************************/
+void imul_byte(u8 s)
+{
+ s16 res = (s16)((s8)M.x86.R_AL * (s8)s);
+
+ M.x86.R_AX = res;
+ if (((M.x86.R_AL & 0x80) == 0 && M.x86.R_AH == 0x00) ||
+ ((M.x86.R_AL & 0x80) != 0 && M.x86.R_AH == 0xFF)) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IMUL instruction and side effects.
+****************************************************************************/
+void imul_word(u16 s)
+{
+ s32 res = (s16)M.x86.R_AX * (s16)s;
+
+ M.x86.R_AX = (u16)res;
+ M.x86.R_DX = (u16)(res >> 16);
+ if (((M.x86.R_AX & 0x8000) == 0 && M.x86.R_DX == 0x0000) ||
+ ((M.x86.R_AX & 0x8000) != 0 && M.x86.R_DX == 0xFFFF)) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IMUL instruction and side effects.
+****************************************************************************/
+void imul_long_direct(u32 *res_lo, u32* res_hi,u32 d, u32 s)
+{
+#ifdef __HAS_LONG_LONG__
+ s64 res = (s32)d * (s32)s;
+
+ *res_lo = (u32)res;
+ *res_hi = (u32)(res >> 32);
+#else
+ u32 d_lo,d_hi,d_sign;
+ u32 s_lo,s_hi,s_sign;
+ u32 rlo_lo,rlo_hi,rhi_lo;
+
+ if ((d_sign = d & 0x80000000) != 0)
+ d = -d;
+ d_lo = d & 0xFFFF;
+ d_hi = d >> 16;
+ if ((s_sign = s & 0x80000000) != 0)
+ s = -s;
+ s_lo = s & 0xFFFF;
+ s_hi = s >> 16;
+ rlo_lo = d_lo * s_lo;
+ rlo_hi = (d_hi * s_lo + d_lo * s_hi) + (rlo_lo >> 16);
+ rhi_lo = d_hi * s_hi + (rlo_hi >> 16);
+ *res_lo = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
+ *res_hi = rhi_lo;
+ if (d_sign != s_sign) {
+ d = ~*res_lo;
+ s = (((d & 0xFFFF) + 1) >> 16) + (d >> 16);
+ *res_lo = ~*res_lo+1;
+ *res_hi = ~*res_hi+(s >> 16);
+ }
+#endif
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IMUL instruction and side effects.
+****************************************************************************/
+void imul_long(u32 s)
+{
+ imul_long_direct(&M.x86.R_EAX,&M.x86.R_EDX,M.x86.R_EAX,s);
+ if (((M.x86.R_EAX & 0x80000000) == 0 && M.x86.R_EDX == 0x00000000) ||
+ ((M.x86.R_EAX & 0x80000000) != 0 && M.x86.R_EDX == 0xFFFFFFFF)) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the MUL instruction and side effects.
+****************************************************************************/
+void mul_byte(u8 s)
+{
+ u16 res = (u16)(M.x86.R_AL * s);
+
+ M.x86.R_AX = res;
+ if (M.x86.R_AH == 0) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the MUL instruction and side effects.
+****************************************************************************/
+void mul_word(u16 s)
+{
+ u32 res = M.x86.R_AX * s;
+
+ M.x86.R_AX = (u16)res;
+ M.x86.R_DX = (u16)(res >> 16);
+ if (M.x86.R_DX == 0) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the MUL instruction and side effects.
+****************************************************************************/
+void mul_long(u32 s)
+{
+#ifdef __HAS_LONG_LONG__
+ u64 res = (u32)M.x86.R_EAX * (u32)s;
+
+ M.x86.R_EAX = (u32)res;
+ M.x86.R_EDX = (u32)(res >> 32);
+#else
+ u32 a,a_lo,a_hi;
+ u32 s_lo,s_hi;
+ u32 rlo_lo,rlo_hi,rhi_lo;
+
+ a = M.x86.R_EAX;
+ a_lo = a & 0xFFFF;
+ a_hi = a >> 16;
+ s_lo = s & 0xFFFF;
+ s_hi = s >> 16;
+ rlo_lo = a_lo * s_lo;
+ rlo_hi = (a_hi * s_lo + a_lo * s_hi) + (rlo_lo >> 16);
+ rhi_lo = a_hi * s_hi + (rlo_hi >> 16);
+ M.x86.R_EAX = (rlo_hi << 16) | (rlo_lo & 0xFFFF);
+ M.x86.R_EDX = rhi_lo;
+#endif
+ if (M.x86.R_EDX == 0) {
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_OF);
+ } else {
+ SET_FLAG(F_CF);
+ SET_FLAG(F_OF);
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IDIV instruction and side effects.
+****************************************************************************/
+void idiv_byte(u8 s)
+{
+ s32 dvd, div, mod;
+
+ dvd = (s16)M.x86.R_AX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (s8)s;
+ mod = dvd % (s8)s;
+ if (abs(div) > 0x7f) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ M.x86.R_AL = (s8) div;
+ M.x86.R_AH = (s8) mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IDIV instruction and side effects.
+****************************************************************************/
+void idiv_word(u16 s)
+{
+ s32 dvd, div, mod;
+
+ dvd = (((s32)M.x86.R_DX) << 16) | M.x86.R_AX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (s16)s;
+ mod = dvd % (s16)s;
+ if (abs(div) > 0x7fff) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_SF);
+ CONDITIONAL_SET_FLAG(div == 0, F_ZF);
+ set_parity_flag(mod);
+
+ M.x86.R_AX = (u16)div;
+ M.x86.R_DX = (u16)mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IDIV instruction and side effects.
+****************************************************************************/
+void idiv_long(u32 s)
+{
+#ifdef __HAS_LONG_LONG__
+ s64 dvd, div, mod;
+
+ dvd = (((s64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (s32)s;
+ mod = dvd % (s32)s;
+ if (abs(div) > 0x7fffffff) {
+ x86emu_intr_raise(0);
+ return;
+ }
+#else
+ s32 div = 0, mod;
+ s32 h_dvd = M.x86.R_EDX;
+ u32 l_dvd = M.x86.R_EAX;
+ u32 abs_s = s & 0x7FFFFFFF;
+ u32 abs_h_dvd = h_dvd & 0x7FFFFFFF;
+ u32 h_s = abs_s >> 1;
+ u32 l_s = abs_s << 31;
+ int counter = 31;
+ int carry;
+
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ do {
+ div <<= 1;
+ carry = (l_dvd >= l_s) ? 0 : 1;
+
+ if (abs_h_dvd < (h_s + carry)) {
+ h_s >>= 1;
+ l_s = abs_s << (--counter);
+ continue;
+ } else {
+ abs_h_dvd -= (h_s + carry);
+ l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
+ : (l_dvd - l_s);
+ h_s >>= 1;
+ l_s = abs_s << (--counter);
+ div |= 1;
+ continue;
+ }
+
+ } while (counter > -1);
+ /* overflow */
+ if (abs_h_dvd || (l_dvd > abs_s)) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ /* sign */
+ div |= ((h_dvd & 0x10000000) ^ (s & 0x10000000));
+ mod = l_dvd;
+
+#endif
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_ZF);
+ set_parity_flag(mod);
+
+ M.x86.R_EAX = (u32)div;
+ M.x86.R_EDX = (u32)mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DIV instruction and side effects.
+****************************************************************************/
+void div_byte(u8 s)
+{
+ u32 dvd, div, mod;
+
+ dvd = M.x86.R_AX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (u8)s;
+ mod = dvd % (u8)s;
+ if (abs(div) > 0xff) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ M.x86.R_AL = (u8)div;
+ M.x86.R_AH = (u8)mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DIV instruction and side effects.
+****************************************************************************/
+void div_word(u16 s)
+{
+ u32 dvd, div, mod;
+
+ dvd = (((u32)M.x86.R_DX) << 16) | M.x86.R_AX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (u16)s;
+ mod = dvd % (u16)s;
+ if (abs(div) > 0xffff) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_SF);
+ CONDITIONAL_SET_FLAG(div == 0, F_ZF);
+ set_parity_flag(mod);
+
+ M.x86.R_AX = (u16)div;
+ M.x86.R_DX = (u16)mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the DIV instruction and side effects.
+****************************************************************************/
+void div_long(u32 s)
+{
+#ifdef __HAS_LONG_LONG__
+ u64 dvd, div, mod;
+
+ dvd = (((u64)M.x86.R_EDX) << 32) | M.x86.R_EAX;
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ div = dvd / (u32)s;
+ mod = dvd % (u32)s;
+ if (abs(div) > 0xffffffff) {
+ x86emu_intr_raise(0);
+ return;
+ }
+#else
+ s32 div = 0, mod;
+ s32 h_dvd = M.x86.R_EDX;
+ u32 l_dvd = M.x86.R_EAX;
+
+ u32 h_s = s;
+ u32 l_s = 0;
+ int counter = 32;
+ int carry;
+
+ if (s == 0) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ do {
+ div <<= 1;
+ carry = (l_dvd >= l_s) ? 0 : 1;
+
+ if (h_dvd < (h_s + carry)) {
+ h_s >>= 1;
+ l_s = s << (--counter);
+ continue;
+ } else {
+ h_dvd -= (h_s + carry);
+ l_dvd = carry ? ((0xFFFFFFFF - l_s) + l_dvd + 1)
+ : (l_dvd - l_s);
+ h_s >>= 1;
+ l_s = s << (--counter);
+ div |= 1;
+ continue;
+ }
+
+ } while (counter > -1);
+ /* overflow */
+ if (h_dvd || (l_dvd > s)) {
+ x86emu_intr_raise(0);
+ return;
+ }
+ mod = l_dvd;
+#endif
+ CLEAR_FLAG(F_CF);
+ CLEAR_FLAG(F_AF);
+ CLEAR_FLAG(F_SF);
+ SET_FLAG(F_ZF);
+ set_parity_flag(mod);
+
+ M.x86.R_EAX = (u32)div;
+ M.x86.R_EDX = (u32)mod;
+}
+
+/****************************************************************************
+REMARKS:
+Implements the IN string instruction and side effects.
+****************************************************************************/
+
+static void single_in(int size)
+{
+ if(size == 1)
+ store_data_byte_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inb)(M.x86.R_DX));
+ else if (size == 2)
+ store_data_word_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inw)(M.x86.R_DX));
+ else
+ store_data_long_abs(M.x86.R_ES, M.x86.R_DI,(*sys_inl)(M.x86.R_DX));
+}
+
+void ins(int size)
+{
+ int inc = size;
+
+ if (ACCESS_FLAG(F_DF)) {
+ inc = -size;
+ }
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* in until CX is ZERO. */
+ u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
+ M.x86.R_ECX : M.x86.R_CX);
+
+ while (count--) {
+ single_in(size);
+ M.x86.R_DI += inc;
+ }
+ M.x86.R_CX = 0;
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_ECX = 0;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ single_in(size);
+ M.x86.R_DI += inc;
+ }
+}
+
+/****************************************************************************
+REMARKS:
+Implements the OUT string instruction and side effects.
+****************************************************************************/
+
+static void single_out(int size)
+{
+ if(size == 1)
+ (*sys_outb)(M.x86.R_DX,fetch_data_byte_abs(M.x86.R_ES, M.x86.R_SI));
+ else if (size == 2)
+ (*sys_outw)(M.x86.R_DX,fetch_data_word_abs(M.x86.R_ES, M.x86.R_SI));
+ else
+ (*sys_outl)(M.x86.R_DX,fetch_data_long_abs(M.x86.R_ES, M.x86.R_SI));
+}
+
+void outs(int size)
+{
+ int inc = size;
+
+ if (ACCESS_FLAG(F_DF)) {
+ inc = -size;
+ }
+ if (M.x86.mode & (SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE)) {
+ /* dont care whether REPE or REPNE */
+ /* out until CX is ZERO. */
+ u32 count = ((M.x86.mode & SYSMODE_PREFIX_DATA) ?
+ M.x86.R_ECX : M.x86.R_CX);
+ while (count--) {
+ single_out(size);
+ M.x86.R_SI += inc;
+ }
+ M.x86.R_CX = 0;
+ if (M.x86.mode & SYSMODE_PREFIX_DATA) {
+ M.x86.R_ECX = 0;
+ }
+ M.x86.mode &= ~(SYSMODE_PREFIX_REPE | SYSMODE_PREFIX_REPNE);
+ } else {
+ single_out(size);
+ M.x86.R_SI += inc;
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Address to fetch word from
+
+REMARKS:
+Fetches a word from emulator memory using an absolute address.
+****************************************************************************/
+u16 mem_access_word(int addr)
+{
+DB( if (CHECK_MEM_ACCESS())
+ x86emu_check_mem_access(addr);)
+ return (*sys_rdw)(addr);
+}
+
+/****************************************************************************
+REMARKS:
+Pushes a word onto the stack.
+
+NOTE: Do not inline this, as (*sys_wrX) is already inline!
+****************************************************************************/
+void push_word(u16 w)
+{
+DB( if (CHECK_SP_ACCESS())
+ x86emu_check_sp_access();)
+ M.x86.R_SP -= 2;
+ (*sys_wrw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w);
+}
+
+/****************************************************************************
+REMARKS:
+Pushes a long onto the stack.
+
+NOTE: Do not inline this, as (*sys_wrX) is already inline!
+****************************************************************************/
+void push_long(u32 w)
+{
+DB( if (CHECK_SP_ACCESS())
+ x86emu_check_sp_access();)
+ M.x86.R_SP -= 4;
+ (*sys_wrl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP, w);
+}
+
+/****************************************************************************
+REMARKS:
+Pops a word from the stack.
+
+NOTE: Do not inline this, as (*sys_rdX) is already inline!
+****************************************************************************/
+u16 pop_word(void)
+{
+ u16 res;
+
+DB( if (CHECK_SP_ACCESS())
+ x86emu_check_sp_access();)
+ res = (*sys_rdw)(((u32)M.x86.R_SS << 4) + M.x86.R_SP);
+ M.x86.R_SP += 2;
+ return res;
+}
+
+/****************************************************************************
+REMARKS:
+Pops a long from the stack.
+
+NOTE: Do not inline this, as (*sys_rdX) is already inline!
+****************************************************************************/
+u32 pop_long(void)
+{
+ u32 res;
+
+DB( if (CHECK_SP_ACCESS())
+ x86emu_check_sp_access();)
+ res = (*sys_rdl)(((u32)M.x86.R_SS << 4) + M.x86.R_SP);
+ M.x86.R_SP += 4;
+ return res;
+}
+
diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c
new file mode 100644
index 0000000..bb7fcd9
--- /dev/null
+++ b/drivers/bios_emulator/x86emu/sys.c
@@ -0,0 +1,322 @@
+/****************************************************************************
+*
+* Realmode X86 Emulator Library
+*
+* Copyright (C) 1991-2004 SciTech Software, Inc.
+* Copyright (C) David Mosberger-Tang
+* Copyright (C) 1999 Egbert Eich
+*
+* ========================================================================
+*
+* Permission to use, copy, modify, distribute, and sell this software and
+* its documentation for any purpose is hereby granted without fee,
+* provided that the above copyright notice appear in all copies and that
+* both that copyright notice and this permission notice appear in
+* supporting documentation, and that the name of the authors not be used
+* in advertising or publicity pertaining to distribution of the software
+* without specific, written prior permission. The authors makes no
+* representations about the suitability of this software for any purpose.
+* It is provided "as is" without express or implied warranty.
+*
+* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+* PERFORMANCE OF THIS SOFTWARE.
+*
+* ========================================================================
+*
+* Language: ANSI C
+* Environment: Any
+* Developer: Kendall Bennett
+*
+* Description: This file includes subroutines which are related to
+* programmed I/O and memory access. Included in this module
+* are default functions that do nothing. For real uses these
+* functions will have to be overriden by the user library.
+*
+****************************************************************************/
+
+#include "x86emu/x86emui.h"
+
+/*------------------------- Global Variables ------------------------------*/
+
+X86EMU_sysEnv _X86EMU_env; /* Global emulator machine state */
+X86EMU_intrFuncs _X86EMU_intrTab[256];
+
+int debug_intr;
+
+/*----------------------------- Implementation ----------------------------*/
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Byte value read from emulator memory.
+
+REMARKS:
+Reads a byte value from the emulator memory.
+****************************************************************************/
+u8 X86API rdb(u32 addr)
+{
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Word value read from emulator memory.
+
+REMARKS:
+Reads a word value from the emulator memory.
+****************************************************************************/
+u16 X86API rdw(u32 addr)
+{
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+
+RETURNS:
+Long value read from emulator memory.
+REMARKS:
+Reads a long value from the emulator memory.
+****************************************************************************/
+u32 X86API rdl(u32 addr)
+{
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a byte value to emulator memory.
+****************************************************************************/
+void X86API wrb(u32 addr, u8 val)
+{
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a word value to emulator memory.
+****************************************************************************/
+void X86API wrw(u32 addr, u16 val)
+{
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - Emulator memory address to read
+val - Value to store
+
+REMARKS:
+Writes a long value to emulator memory.
+****************************************************************************/
+void X86API wrl(u32 addr, u32 val)
+{
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to read
+RETURN:
+0
+REMARKS:
+Default PIO byte read function. Doesn't perform real inb.
+****************************************************************************/
+static u8 X86API p_inb(X86EMU_pioAddr addr)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("inb %#04x \n", addr);)
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to read
+RETURN:
+0
+REMARKS:
+Default PIO word read function. Doesn't perform real inw.
+****************************************************************************/
+static u16 X86API p_inw(X86EMU_pioAddr addr)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("inw %#04x \n", addr);)
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to read
+RETURN:
+0
+REMARKS:
+Default PIO long read function. Doesn't perform real inl.
+****************************************************************************/
+static u32 X86API p_inl(X86EMU_pioAddr addr)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("inl %#04x \n", addr);)
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to write
+val - Value to store
+REMARKS:
+Default PIO byte write function. Doesn't perform real outb.
+****************************************************************************/
+static void X86API p_outb(X86EMU_pioAddr addr, u8 val)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("outb %#02x -> %#04x \n", val, addr);)
+ return;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to write
+val - Value to store
+REMARKS:
+Default PIO word write function. Doesn't perform real outw.
+****************************************************************************/
+static void X86API p_outw(X86EMU_pioAddr addr, u16 val)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("outw %#04x -> %#04x \n", val, addr);)
+ return;
+}
+
+/****************************************************************************
+PARAMETERS:
+addr - PIO address to write
+val - Value to store
+REMARKS:
+Default PIO ;ong write function. Doesn't perform real outl.
+****************************************************************************/
+static void X86API p_outl(X86EMU_pioAddr addr, u32 val)
+{
+ DB(if (DEBUG_IO_TRACE())
+ printk("outl %#08x -> %#04x \n", val, addr);)
+ return;
+}
+
+/*------------------------- Global Variables ------------------------------*/
+
+u8(X86APIP sys_rdb) (u32 addr) = rdb;
+u16(X86APIP sys_rdw) (u32 addr) = rdw;
+u32(X86APIP sys_rdl) (u32 addr) = rdl;
+void (X86APIP sys_wrb) (u32 addr, u8 val) = wrb;
+void (X86APIP sys_wrw) (u32 addr, u16 val) = wrw;
+void (X86APIP sys_wrl) (u32 addr, u32 val) = wrl;
+u8(X86APIP sys_inb) (X86EMU_pioAddr addr) = p_inb;
+u16(X86APIP sys_inw) (X86EMU_pioAddr addr) = p_inw;
+u32(X86APIP sys_inl) (X86EMU_pioAddr addr) = p_inl;
+void (X86APIP sys_outb) (X86EMU_pioAddr addr, u8 val) = p_outb;
+void (X86APIP sys_outw) (X86EMU_pioAddr addr, u16 val) = p_outw;
+void (X86APIP sys_outl) (X86EMU_pioAddr addr, u32 val) = p_outl;
+
+/*----------------------------- Setup -------------------------------------*/
+
+/****************************************************************************
+PARAMETERS:
+funcs - New memory function pointers to make active
+
+REMARKS:
+This function is used to set the pointers to functions which access
+memory space, allowing the user application to override these functions
+and hook them out as necessary for their application.
+****************************************************************************/
+void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs)
+{
+ sys_rdb = funcs->rdb;
+ sys_rdw = funcs->rdw;
+ sys_rdl = funcs->rdl;
+ sys_wrb = funcs->wrb;
+ sys_wrw = funcs->wrw;
+ sys_wrl = funcs->wrl;
+}
+
+/****************************************************************************
+PARAMETERS:
+funcs - New programmed I/O function pointers to make active
+
+REMARKS:
+This function is used to set the pointers to functions which access
+I/O space, allowing the user application to override these functions
+and hook them out as necessary for their application.
+****************************************************************************/
+void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs)
+{
+ sys_inb = funcs->inb;
+ sys_inw = funcs->inw;
+ sys_inl = funcs->inl;
+ sys_outb = funcs->outb;
+ sys_outw = funcs->outw;
+ sys_outl = funcs->outl;
+}
+
+/****************************************************************************
+PARAMETERS:
+funcs - New interrupt vector table to make active
+
+REMARKS:
+This function is used to set the pointers to functions which handle
+interrupt processing in the emulator, allowing the user application to
+hook interrupts as necessary for their application. Any interrupts that
+are not hooked by the user application, and reflected and handled internally
+in the emulator via the interrupt vector table. This allows the application
+to get control when the code being emulated executes specific software
+interrupts.
+****************************************************************************/
+void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[])
+{
+ int i;
+
+ for (i = 0; i < 256; i++)
+ _X86EMU_intrTab[i] = NULL;
+ if (funcs) {
+ for (i = 0; i < 256; i++)
+ _X86EMU_intrTab[i] = funcs[i];
+ }
+}
+
+/****************************************************************************
+PARAMETERS:
+int - New software interrupt to prepare for
+
+REMARKS:
+This function is used to set up the emulator state to exceute a software
+interrupt. This can be used by the user application code to allow an
+interrupt to be hooked, examined and then reflected back to the emulator
+so that the code in the emulator will continue processing the software
+interrupt as per normal. This essentially allows system code to actively
+hook and handle certain software interrupts as necessary.
+****************************************************************************/
+void X86EMU_prepareForInt(int num)
+{
+ push_word((u16) M.x86.R_FLG);
+ CLEAR_FLAG(F_IF);
+ CLEAR_FLAG(F_TF);
+ push_word(M.x86.R_CS);
+ M.x86.R_CS = mem_access_word(num * 4 + 2);
+ push_word(M.x86.R_IP);
+ M.x86.R_IP = mem_access_word(num * 4);
+ M.x86.intr = 0;
+}