arm: dts: imx8m*-venice: add gpio hog support
Add gpio hog support for board-specific gpio lines:
- put hogs in u-boot.dtsi so as to keep the regular dts files
in sync with the kernel. The hogs will not be put in the kernel
as that makes them un-usable by userspace as well as
re-initializes them to dt defaults overriding changes which may
have been done by bootloader commands.
- specify gpio names and initial config
- enable GPIO_HOG
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi
index f5d52c2..b359233 100644
--- a/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw71xx-0x-u-boot.dtsi
@@ -3,3 +3,49 @@
* Copyright 2021 Gateworks Corporation
*/
#include "imx8mm-venice-gw700x-u-boot.dtsi"
+
+&gpio1 {
+ pci_usb_sel {
+ gpio-hog;
+ output-low;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ line-name = "pci_usb_sel";
+ };
+
+ dio_0 {
+ gpio-hog;
+ input;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ line-name = "dio0";
+ };
+
+ dio_1 {
+ gpio-hog;
+ input;
+ gpios = <9 GPIO_ACTIVE_HIGH>;
+ line-name = "dio1";
+ };
+};
+
+&gpio4 {
+ dio_2 {
+ gpio-hog;
+ input;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ line-name = "dio2";
+ };
+
+ dio_3 {
+ gpio-hog;
+ input;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ line-name = "dio3";
+ };
+
+ pci_wdis {
+ gpio-hog;
+ output-high;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ line-name = "pci_wdis#";
+ };
+};