convert common files to new SoC access
* add's a warning to all files, which need update to new SoC access
* convert common files in cpu/../at91 and a lot of drivers to use
c stucture SoC access
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c
index 7352b5c..d21eebf 100644
--- a/cpu/arm926ejs/at91/timer.c
+++ b/cpu/arm926ejs/at91/timer.c
@@ -35,8 +35,6 @@
* setting the 20 bit counter period to its maximum (0xfffff).
*/
#define TIMER_LOAD_VAL 0xfffff
-#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR)
-#define READ_TIMER at91_sys_read(AT91_PIT_PIIR)
static ulong timestamp;
static ulong lastinc;
@@ -61,14 +59,16 @@
/* nothing really to do with interrupts, just starts up a counter. */
int timer_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE;
/*
* Enable PITC Clock
* The clock is already enabled for system controller in boot
*/
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+ writel(1 << AT91_ID_SYS, &pmc->pcer);
/* Enable PITC */
- at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN);
+ writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
reset_timer_masked();
@@ -82,7 +82,9 @@
*/
unsigned long long get_ticks(void)
{
- ulong now = READ_TIMER;
+ at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE;
+
+ ulong now = readl(&pit->piir);
if (now >= lastinc) /* normal mode (non roll) */
/* move stamp forward with absolut diff ticks */
@@ -96,7 +98,10 @@
void reset_timer_masked(void)
{
/* reset time */
- lastinc = READ_TIMER; /* capture current incrementer value time */
+ at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE;
+
+ /* capture current incrementer value time */
+ lastinc = readl(&pit->piir);
timestamp = 0; /* start "advancing" time stamp from 0 */
}