Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2b899b8..d1c3157 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -580,6 +580,7 @@
select SPL_OF_CONTROL if SPL
select DM
select DM_ETH
+ select DM_GPIO
select SPL_DM if SPL
select DM_MMC
select DM_SPI
@@ -592,8 +593,6 @@
select ARM64
select DM
select OF_CONTROL
- select DM_ETH
- select DM_MMC
select DM_SERIAL
config TEGRA
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0915e05..aa31fd9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,7 +81,12 @@
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
- zynqmp-ep108.dtb
+ zynqmp-ep108.dtb \
+ zynqmp-zcu102.dtb \
+ zynqmp-zcu102-revB.dtb \
+ zynqmp-zc1751-xm015-dc1.dtb \
+ zynqmp-zc1751-xm016-dc2.dtb \
+ zynqmp-zc1751-xm019-dc5.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 2d786f0..a327557 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -96,8 +96,10 @@
gpio0: gpio@e000a000 {
compatible = "xlnx,zynq-gpio-1.0";
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
clocks = <&clkc 42>;
gpio-controller;
+ interrupt-controller;
interrupt-parent = <&intc>;
interrupts = <0 20 4>;
reg = <0xe000a000 0x1000>;
@@ -270,6 +272,13 @@
reg = <0x100 0x100>;
};
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
pinctrl0: pinctrl@700 {
compatible = "xlnx,pinctrl-zynq";
reg = <0x700 0x200>;
@@ -297,7 +306,12 @@
devcfg: devcfg@f8007000 {
compatible = "xlnx,zynq-devcfg-1.0";
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 4>;
reg = <0xf8007000 0x100>;
+ clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
+ clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
+ syscon = <&slcr>;
};
global_timer: timer@f8f00200 {
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index 793ab44..cb238cd 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -1,7 +1,7 @@
/*
* Xilinx MicroZED board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2016 Xilinx, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -15,14 +15,29 @@
aliases {
serial0 = &uart1;
spi0 = &qspi;
+ mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
};
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
@@ -31,4 +46,25 @@
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 528cd27..6585010 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -27,7 +27,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -91,6 +91,8 @@
phy-handle = <ðernet_phy>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem0_default>;
+ phy-reset-gpio = <&gpio0 11 0>;
+ phy-reset-active-low;
ethernet_phy: ethernet-phy@7 {
reg = <7>;
@@ -128,6 +130,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -370,6 +387,11 @@
};
};
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
@@ -384,11 +406,6 @@
pinctrl-0 = <&pinctrl_uart1_default>;
};
-&qspi {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
&usb0 {
status = "okay";
dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 1610520..d04880a 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -27,7 +27,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -84,6 +84,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "evenly";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -291,6 +306,11 @@
};
};
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
@@ -305,11 +325,6 @@
pinctrl-0 = <&pinctrl_uart1_default>;
};
-&qspi {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
&usb0 {
status = "okay";
dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index b6982c0..33524cb 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -36,27 +36,6 @@
};
};
-&spi1 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
- flash@0 {
- compatible = "sst25wf080";
- reg = <1>;
- spi-max-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@test {
- label = "spi-flash";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&qspi {
- status = "okay";
-};
-
&can0 {
status = "okay";
};
@@ -82,10 +61,31 @@
};
+&qspi {
+ status = "okay";
+};
+
&sdhci0 {
status = "okay";
};
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ flash@0 {
+ compatible = "sst25wf080";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@test {
+ label = "spi-flash";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 4fed221..463b14b 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
#include "zynq-7000.dtsi"
+
/ {
compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
model = "Xilinx Zynq";
@@ -18,7 +19,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 8d69f0e..6cab832 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 77fdfcc..d5bb4ef 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -16,11 +16,12 @@
ethernet0 = &gem1;
i2c0 = &i2c1;
serial0 = &uart0;
- spi0 = &spi0;
+ spi0 = &qspi;
+ spi1 = &spi0;
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -58,6 +59,10 @@
};
};
+&qspi {
+ status = "okay";
+};
+
&spi0 {
status = "okay";
num-cs = <4>;
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index ec9b2f7..4363a4f 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -26,7 +26,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -50,17 +50,17 @@
};
};
-&sdhci0 {
+&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
-&uart1 {
+&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
-&qspi {
+&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index d04e962..f8dcf1d 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -26,13 +26,13 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
- #phy-cells = <0>;
compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
reset-gpios = <&gpio0 46 1>;
};
};
@@ -51,17 +51,17 @@
};
};
-&sdhci0 {
+&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
-&uart1 {
+&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
-&qspi {
+&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
new file mode 100644
index 0000000..3418909
--- /dev/null
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -0,0 +1,202 @@
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+&amba {
+ clk100: clk100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ clk125: clk125 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk200: clk200 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ clk250: clk250 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ clk300: clk300 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000000>;
+ };
+
+ clk600: clk600 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ dp_aclk: clock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-accuracy = <100>;
+ };
+
+ dp_aud_clk: clock1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ clock-accuracy = <100>;
+ };
+
+ dpdma_clk: dpdma_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <533000000>;
+ };
+
+ drm_clock: drm_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <262750000>;
+ clock-accuracy = <0x64>;
+ };
+};
+
+&can0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&can1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&nand0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&gem0 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem1 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem2 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem3 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gpio {
+ clocks = <&clk100>;
+};
+
+&i2c0 {
+ clocks = <&clk100>;
+};
+
+&i2c1 {
+ clocks = <&clk100>;
+};
+
+&qspi {
+ clocks = <&clk300 &clk300>;
+};
+
+&sata {
+ clocks = <&clk250>;
+};
+
+&sdhci0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&sdhci1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&uart0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&uart1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&usb0 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&usb1 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&xilinx_drm {
+ clocks = <&drm_clock>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+ clocks = <&dpdma_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&dp_aud_clk>;
+};
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index f864526..48bb426 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -62,6 +62,10 @@
clocks = <&i2c_clk>;
};
+&nand0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
&qspi {
clocks = <&misc_clk &misc_clk>;
};
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 754604e..0bbf9a7 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -10,17 +10,21 @@
/dts-v1/;
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
serial0 = &uart0;
spi0 = &qspi;
spi1 = &spi0;
spi2 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
};
chosen {
@@ -29,7 +33,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x0 0x40000000>;
+ reg = <0x0 0x0 0x0 0x40000000>;
};
};
@@ -69,10 +73,41 @@
};
};
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <1>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+};
+
&qspi {
status = "okay";
flash@0 {
- compatible = "n25q512a11";
+ compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
@@ -101,10 +136,20 @@
&sata {
status = "okay";
ceva,broken-gen2;
+ /* SATA Phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
};
&sdhci0 {
status = "okay";
+ bus-width = <8>;
};
&sdhci1 {
@@ -151,12 +196,20 @@
&usb0 {
status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
dr_mode = "peripheral";
maximum-speed = "high-speed";
};
&usb1 {
status = "okay";
+};
+
+&dwc3_1 {
+ status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 0000000..c68a41b
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,211 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm015-dc1 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@55 {
+ compatible = "at,24c64"; /* 24AA64 */
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* eMMC */
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 0000000..3fdfcc8
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,236 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm016-dc2 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &gem2;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem2 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u26: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* IRQ not connected */
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <2>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+
+ partition@6 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x1 0x0 0x400000>;
+ };
+ partition@7 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x1 0x400000 0x1400000>;
+ };
+ partition@8 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x1 0x1800000 0x400000>;
+ };
+ partition@9 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x1 0x1C00000 0x1400000>;
+ };
+ partition@10 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x1 0x3000000 0x400000>;
+ };
+ partition@11 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x1 0x3400000 0xFCC00000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "mtd_dataflash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ spi1_flash0@00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x84000>;
+ };
+ };
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 0000000..d754f9f
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,121 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+/ {
+ model = "ZynqMP zc1751-xm019-dc5 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem1;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ bootargs = "earlycon=cdns,mmio,0xff000000,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem1 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c0 {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c1 {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
new file mode 100644
index 0000000..765108e
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -0,0 +1,42 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "zynqmp-zcu102.dts"
+
+/ {
+ model = "ZynqMP ZCU102 RevB";
+};
+
+&gem3 {
+ phy-handle = <&phyc>;
+ phyc: phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+ /* Cleanup from RevA */
+ /delete-node/ phy@21;
+};
+
+/* Different qspi 512Mbit version */
+
+/* Fix collision with u61 */
+&i2c0 {
+ i2cswitch@75 {
+ i2c@2 {
+ max15303@1b { /* u8 */
+ compatible = "max15303";
+ reg = <0x1b>;
+ };
+ /delete-node/ max15303@20;
+ };
+ };
+};
diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
new file mode 100644
index 0000000..de99602
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -0,0 +1,631 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP ZCU102 RevA";
+ compatible = "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@21 {
+ reg = <21>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u97: gpio@20 {
+ /*
+ * Enable all GTs to out from U-Boot
+ * i2c mw 20 6 0 - setup IO to output
+ * i2c mw 20 2 ef - setup output values on pins 0-7
+ * i2c mw 20 3 ff - setup output values on pins 10-17
+ */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - PS_GTR_LAN_SEL0
+ * 1 - PS_GTR_LAN_SEL1
+ * 2 - PS_GTR_LAN_SEL2
+ * 3 - PS_GTR_LAN_SEL3
+ * 4 - PCI_CLK_DIR_SEL
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7, 10 - 17 - not connected
+ */
+
+ gtr_sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel0";
+ };
+ gtr_sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel1";
+ };
+ gtr_sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ output-high; /* PCIE = 0, USB0 = 1 */
+ line-name = "sel2";
+ };
+ gtr_sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ output-high; /* PCIE = 0, SATA = 1 */
+ line-name = "sel3";
+ };
+ };
+
+ tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - VCCPSPLL_EN
+ * 1 - MGTRAVCC_EN
+ * 2 - MGTRAVTT_EN
+ * 3 - VCCPSDDRPLL_EN
+ * 4 - MIO26_PMU_INPUT_LS
+ * 5 - PL_PMBUS_ALERT
+ * 6 - PS_PMBUS_ALERT
+ * 7 - MAXIM_PMBUS_ALERT
+ * 10 - PL_DDR4_VTERM_EN
+ * 11 - PL_DDR4_VPP_2V5_EN
+ * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+ * 13 - PS_DIMM_SUSPEND_EN
+ * 14 - PS_DDR4_VTERM_EN
+ * 15 - PS_DDR4_VPP_2V5_EN
+ * 16 - 17 - not connected
+ */
+ };
+
+ i2cswitch@75 { /* u60 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ ina226@40 { /* u76 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ ina226@41 { /* u77 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u78 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u87 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u85 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u86 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u93 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u88 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4a { /* u15 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4b { /* u92 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* PL_PMBUS */
+ ina226@40 { /* u79 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ ina226@41 { /* u81 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u80 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u84 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u16 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u74 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u75 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* MAXIM_PMBUS - 00 */
+ max15301@a { /* u46 */
+ compatible = "max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u4 */
+ compatible = "max15303";
+ reg = <0xb>;
+ };
+ max15303@10 { /* u13 */
+ compatible = "max15303";
+ reg = <0x10>;
+ };
+ max15301@13 { /* u47 */
+ compatible = "max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u7 */
+ compatible = "max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u6 */
+ compatible = "max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u10 */
+ compatible = "max15303";
+ reg = <0x16>;
+ };
+ max15303@17 { /* u9 */
+ compatible = "max15303";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u63 */
+ compatible = "max15301";
+ reg = <0x18>;
+ };
+ max15303@1a { /* u49 */
+ compatible = "max15303";
+ reg = <0x1a>;
+ };
+ max15303@1d { /* u18 */
+ compatible = "max15303";
+ reg = <0x1d>;
+ };
+ max15303@20 { /* u8 */
+ compatible = "max15303";
+ status = "disabled"; /* unreachable */
+ reg = <0x20>;
+ };
+
+/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
+drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
+*/
+ max20751@72 { /* u95 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x72>;
+ };
+ max20751@73 { /* u96 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x73>;
+ };
+ };
+ /* Bus 3 is not connected */
+ };
+
+ /* FIXME PL connection - u55 , PMOD - j160 */
+ /* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ /* FIXME PL i2c via PCA9306 - u45 */
+ /* FIXME MSP430 - u41 - not detected */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator1@36 { /* SI5341 - u69 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ };
+ };
+ i2c@3 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>; /* copy from zc702 */
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@4 { /* i2c mw 74 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si5328: clock-generator4@69 {/* SI5328 - u20 */
+ compatible = "silabs,si5328";
+ reg = <0x69>;
+ };
+ };
+ /* 5 - 7 unconnected */
+ };
+
+ i2cswitch@75 {
+ compatible = "nxp,pca9548"; /* u135 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* HPC0_IIC */
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* HPC1_IIC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ dev@19 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x19>;
+ };
+ dev@30 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x30>;
+ };
+ dev@35 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x35>;
+ };
+ dev@36 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x36>;
+ };
+ dev@51 { /* u-boot detection - maybe SPD */
+ compatible = "xxx";
+ reg = <0x51>;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SEP 3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SEP 2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SEP 1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SEP 0 */
+ };
+ };
+};
+
+&pcie {
+/* status = "okay"; */
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+ clocks = <&si570_1>;
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8733604..fb95b48 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -10,7 +10,7 @@
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
cpus {
#address-cells = <1>;
@@ -45,8 +45,179 @@
};
};
+ power-domains {
+ compatible = "xlnx,zynqmp-genpd";
+
+ pd_usb0: pd-usb0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x16>;
+ };
+
+ pd_usb1: pd-usb1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x17>;
+ };
+
+ pd_sata: pd-sata {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1c>;
+ };
+
+ pd_spi0: pd-spi0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x23>;
+ };
+
+ pd_spi1: pd-spi1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x24>;
+ };
+
+ pd_uart0: pd-uart0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x21>;
+ };
+
+ pd_uart1: pd-uart1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x22>;
+ };
+
+ pd_eth0: pd-eth0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1d>;
+ };
+
+ pd_eth1: pd-eth1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1e>;
+ };
+
+ pd_eth2: pd-eth2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1f>;
+ };
+
+ pd_eth3: pd-eth3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x20>;
+ };
+
+ pd_i2c0: pd-i2c0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x25>;
+ };
+
+ pd_i2c1: pd-i2c1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x26>;
+ };
+
+ pd_dp: pd-dp {
+ /* fixme: what to attach to */
+ #power-domain-cells = <0x0>;
+ pd-id = <0x29>;
+ };
+
+ pd_gdma: pd-gdma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2a>;
+ };
+
+ pd_adma: pd-adma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2b>;
+ };
+
+ pd_ttc0: pd-ttc0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x18>;
+ };
+
+ pd_ttc1: pd-ttc1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x19>;
+ };
+
+ pd_ttc2: pd-ttc2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1a>;
+ };
+
+ pd_ttc3: pd-ttc3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1b>;
+ };
+
+ pd_sd0: pd-sd0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x27>;
+ };
+
+ pd_sd1: pd-sd1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x28>;
+ };
+
+ pd_nand: pd-nand {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2c>;
+ };
+
+ pd_qspi: pd-qspi {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2d>;
+ };
+
+ pd_gpio: pd-gpio {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2e>;
+ };
+
+ pd_can0: pd-can0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2f>;
+ };
+
+ pd_can1: pd-can1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x30>;
+ };
+
+ pd_ddr: pd-ddr {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x37>;
+ };
+
+ pd_apll: pd-apll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x32>;
+ };
+
+ pd_vpll: pd-vpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x33>;
+ };
+
+ pd_dpll: pd-dpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x34>;
+ };
+
+ pd_rpll: pd-rpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x35>;
+ };
+
+ pd_iopll: pd-iopll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x36>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
+ interrupt-parent = <&gic>;
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
@@ -76,7 +247,7 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0 0 0 0xffffffff>;
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
@@ -95,7 +266,7 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0 0 0 0xffffffff>;
can0: can@ff060000 {
compatible = "xlnx,zynq-can-1.0";
@@ -106,6 +277,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can0>;
};
can1: can@ff070000 {
@@ -117,8 +289,28 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can1>;
};
+ cci: cci@fd6e0000 {
+ compatible = "arm,cci-400";
+ reg = <0x0 0xfd6e0000 0x9000>;
+ ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>;
+ };
+ };
+
/* GDMA */
fpd_dma_chan1: dma@fd500000 {
status = "disabled";
@@ -126,8 +318,10 @@
reg = <0x0 0xfd500000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 124 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <0>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -136,8 +330,10 @@
reg = <0x0 0xfd510000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 125 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <1>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -146,8 +342,10 @@
reg = <0x0 0xfd520000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 126 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <2>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -156,8 +354,10 @@
reg = <0x0 0xfd530000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 127 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <3>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -166,8 +366,10 @@
reg = <0x0 0xfd540000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 128 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <4>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -176,8 +378,10 @@
reg = <0x0 0xfd550000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 129 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <5>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -186,8 +390,10 @@
reg = <0x0 0xfd560000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 130 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <6>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -196,8 +402,10 @@
reg = <0x0 0xfd570000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 131 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <7>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
gpu: gpu@fd4b0000 {
@@ -218,6 +426,7 @@
interrupts = <0 77 4>;
xlnx,id = <0>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -228,6 +437,7 @@
interrupts = <0 78 4>;
xlnx,id = <1>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -238,6 +448,7 @@
interrupts = <0 79 4>;
xlnx,id = <2>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -248,6 +459,7 @@
interrupts = <0 80 4>;
xlnx,id = <3>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -258,6 +470,7 @@
interrupts = <0 81 4>;
xlnx,id = <4>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -268,6 +481,7 @@
interrupts = <0 82 4>;
xlnx,id = <5>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -278,6 +492,7 @@
interrupts = <0 83 4>;
xlnx,id = <6>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -288,8 +503,16 @@
interrupts = <0 84 4>;
xlnx,id = <7>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
+ mc: memory-controller@fd070000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
+ };
+
nand0: nand@ff100000 {
compatible = "arasan,nfc-v3p10";
status = "disabled";
@@ -299,10 +522,11 @@
interrupts = <0 14 4>;
#address-cells = <2>;
#size-cells = <1>;
+ power-domains = <&pd_nand>;
};
gem0: ethernet@ff0b0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
@@ -310,12 +534,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth0>;
};
gem1: ethernet@ff0c0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
@@ -323,12 +547,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth1>;
};
gem2: ethernet@ff0d0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
@@ -336,12 +560,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth2>;
};
gem3: ethernet@ff0e0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
@@ -349,17 +573,20 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth3>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
reg = <0x0 0xff0a0000 0x1000>;
+ power-domains = <&pd_gpio>;
};
i2c0: i2c@ff020000 {
@@ -370,6 +597,7 @@
reg = <0x0 0xff020000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c0>;
};
i2c1: i2c@ff030000 {
@@ -380,6 +608,7 @@
reg = <0x0 0xff030000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c1>;
};
pcie: pcie@fd0e0000 {
@@ -390,16 +619,26 @@
#interrupt-cells = <1>;
device_type = "pci";
interrupt-parent = <&gic>;
- interrupts = < 0 118 4>,
- < 0 116 4>,
- < 0 115 4>, /* MSI_1 [63...32] */
- < 0 114 4 >; /* MSI_0 [31...0] */
+ interrupts = <0 118 4>,
+ <0 116 4>,
+ <0 115 4>, /* MSI_1 [63...32] */
+ <0 114 4>; /* MSI_0 [31...0] */
interrupt-names = "misc", "intx", "msi_1", "msi_0";
reg = <0x0 0xfd0e0000 0x1000>,
<0x0 0xfd480000 0x1000>,
<0x0 0xe0000000 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
};
qspi: spi@ff0f0000 {
@@ -409,9 +648,11 @@
interrupts = <0 15 4>;
interrupt-parent = <&gic>;
num-cs = <1>;
- reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+ reg = <0x0 0xff0f0000 0x1000>,
+ <0x0 0xc0000000 0x8000000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_qspi>;
};
rtc: rtc@ffa60000 {
@@ -429,6 +670,7 @@
reg = <0x0 0xfd0c0000 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&pd_sata>;
};
sdhci0: sdhci@ff160000 {
@@ -438,6 +680,8 @@
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ broken-tuning;
+ power-domains = <&pd_sd0>;
};
sdhci1: sdhci@ff170000 {
@@ -447,6 +691,8 @@
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ broken-tuning;
+ power-domains = <&pd_sd1>;
};
smmu: smmu@fd800000 {
@@ -454,11 +700,15 @@
reg = <0x0 0xfd800000 0x20000>;
#global-interrupts = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ interrupts = <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+ mmu-masters = < &gem0 0x874
+ &gem1 0x875
+ &gem2 0x876
+ &gem3 0x877 >;
};
spi0: spi@ff040000 {
@@ -470,6 +720,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi0>;
};
spi1: spi@ff050000 {
@@ -481,6 +732,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi1>;
};
ttc0: timer@ff110000 {
@@ -490,6 +742,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc0>;
};
ttc1: timer@ff120000 {
@@ -499,6 +752,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc1>;
};
ttc2: timer@ff130000 {
@@ -508,6 +762,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc2>;
};
ttc3: timer@ff140000 {
@@ -517,42 +772,69 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc3>;
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p12";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart0>;
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p12";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart1>;
};
usb0: usb@fe200000 {
- compatible = "snps,dwc3";
+ #address-cells = <2>;
+ #size-cells = <1>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 65 4>;
- reg = <0x0 0xfe200000 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk", "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ power-domains = <&pd_usb0>;
+ ranges;
+
+ dwc3_0: dwc3@fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe200000 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>;
+ /* snps,quirk-frame-length-adjustment = <0x20>; */
+ snps,refclk_fladj;
+ };
};
usb1: usb@fe300000 {
- compatible = "snps,dwc3";
+ #address-cells = <2>;
+ #size-cells = <1>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 70 4>;
- reg = <0x0 0xfe300000 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk", "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ power-domains = <&pd_usb1>;
+ ranges;
+
+ dwc3_1: dwc3@fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe300000 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>;
+ /* snps,quirk-frame-length-adjustment = <0x20>; */
+ snps,refclk_fladj;
+ };
};
watchdog0: watchdog@fd4d0000 {
@@ -583,10 +865,11 @@
};
};
- xlnx_dp: dp@43c00000 {
+ xlnx_dp: dp@fd4a0000 {
compatible = "xlnx,v-dp";
status = "disabled";
- reg = <0x0 0xfd4a0000 0x1000>;
+ reg = <0x0 0xfd4a0000 0x1000>,
+ <0x0 0xfd400000 0x20000>;
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
clock-names = "aclk", "aud_clk";
@@ -599,6 +882,7 @@
xlnx,bpc = <8>;
xlnx,audio-chan = <2>;
xlnx,dp-sub = <&xlnx_dp_sub>;
+ xlnx,max-pclock-frequency = <300000>;
};
xlnx_dp_snd_card: dp_snd_card {
@@ -628,12 +912,16 @@
dma-names = "tx";
};
- xlnx_dp_sub: dp_sub@43c0a000 {
+ xlnx_dp_sub: dp_sub@fd4aa000 {
compatible = "xlnx,dp-sub";
status = "disabled";
- reg = <0x0 0xfd4aa000 0x1000>, <0x0 0xfd4ab000 0x1000>, <0x0 0xfd4ac000 0x1000>;
+ reg = <0x0 0xfd4aa000 0x1000>,
+ <0x0 0xfd4ab000 0x1000>,
+ <0x0 0xfd4ac000 0x1000>;
reg-names = "blend", "av_buf", "aud";
xlnx,output-fmt = "rgb";
+ xlnx,vid-fmt = "yuyv";
+ xlnx,gfx-fmt = "rgb565";
};
xlnx_dpdma: dma@fd4c0000 {
@@ -645,22 +933,22 @@
clock-names = "axi_clk";
dma-channels = <6>;
#dma-cells = <1>;
- dma-video0channel@43c10000 {
+ dma-video0channel@fd4c0000 {
compatible = "xlnx,video0";
};
- dma-video1channel@43c10000 {
+ dma-video1channel@fd4c0000 {
compatible = "xlnx,video1";
};
- dma-video2channel@43c10000 {
+ dma-video2channel@fd4c0000 {
compatible = "xlnx,video2";
};
- dma-graphicschannel@43c10000 {
+ dma-graphicschannel@fd4c0000 {
compatible = "xlnx,graphics";
};
- dma-audio0channel@43c10000 {
+ dma-audio0channel@fd4c0000 {
compatible = "xlnx,audio0";
};
- dma-audio1channel@43c10000 {
+ dma-audio1channel@fd4c0000 {
compatible = "xlnx,audio1";
};
};
diff --git a/arch/arm/mach-zynq/include/mach/gpio.h b/arch/arm/mach-zynq/include/mach/gpio.h
index 0789c49..f3dfd65 100644
--- a/arch/arm/mach-zynq/include/mach/gpio.h
+++ b/arch/arm/mach-zynq/include/mach/gpio.h
@@ -8,67 +8,4 @@
#ifndef _ZYNQ_GPIO_H
#define _ZYNQ_GPIO_H
-#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
-
-/* Maximum banks */
-#define ZYNQ_GPIO_MAX_BANK 4
-
-#define ZYNQ_GPIO_BANK0_NGPIO 32
-#define ZYNQ_GPIO_BANK1_NGPIO 22
-#define ZYNQ_GPIO_BANK2_NGPIO 32
-#define ZYNQ_GPIO_BANK3_NGPIO 32
-
-#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
- ZYNQ_GPIO_BANK1_NGPIO + \
- ZYNQ_GPIO_BANK2_NGPIO + \
- ZYNQ_GPIO_BANK3_NGPIO)
-
-#define ZYNQ_GPIO_BANK0_PIN_MIN 0
-#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
- ZYNQ_GPIO_BANK0_NGPIO - 1)
-#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
- ZYNQ_GPIO_BANK1_NGPIO - 1)
-#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
- ZYNQ_GPIO_BANK2_NGPIO - 1)
-#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
- ZYNQ_GPIO_BANK3_NGPIO - 1)
-
-/* Register offsets for the GPIO device */
-/* LSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
-/* MSW Mask & Data -WO */
-#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
-/* Data Register-RW */
-#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
-/* Direction mode reg-RW */
-#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
-/* Output enable reg-RW */
-#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
-/* Interrupt mask reg-RO */
-#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
-/* Interrupt enable reg-WO */
-#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
-/* Interrupt disable reg-WO */
-#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
-/* Interrupt status reg-RO */
-#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
-/* Interrupt type reg-RW */
-#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
-/* Interrupt polarity reg-RW */
-#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
-/* Interrupt on any, reg-RW */
-#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
-
-/* Disable all interrupts mask */
-#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
-
-/* Mid pin number of a bank */
-#define ZYNQ_GPIO_MID_PIN_NUM 16
-
-/* GPIO upper 16 bit mask */
-#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
-
#endif /* _ZYNQ_GPIO_H */
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 4c20450..183f642 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -111,26 +111,134 @@
return 0;
}
+#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
+/*
+ * fdt_get_reg - Fill buffer by information from DT
+ */
+static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
+ const u32 *cell, int n)
+{
+ int i = 0, b, banks;
+ int parent_offset = fdt_parent_offset(fdt, nodeoffset);
+ int address_cells = fdt_address_cells(fdt, parent_offset);
+ int size_cells = fdt_size_cells(fdt, parent_offset);
+ char *p = buf;
+ u64 val;
+ u64 vals;
+
+ debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
+ __func__, address_cells, size_cells, buf, cell);
+
+ /* Check memory bank setup */
+ banks = n % (address_cells + size_cells);
+ if (banks)
+ panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
+ n, address_cells, size_cells);
+
+ banks = n / (address_cells + size_cells);
+
+ for (b = 0; b < banks; b++) {
+ debug("%s: Bank #%d:\n", __func__, b);
+ if (address_cells == 2) {
+ val = cell[i + 1];
+ val <<= 32;
+ val |= cell[i];
+ val = fdt64_to_cpu(val);
+ debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
+ __func__, val, p, &cell[i]);
+ *(phys_addr_t *)p = val;
+ } else {
+ debug("%s: addr32=%x, ptr=%p\n",
+ __func__, fdt32_to_cpu(cell[i]), p);
+ *(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
+ }
+ p += sizeof(phys_addr_t);
+ i += address_cells;
+
+ debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
+ sizeof(phys_addr_t));
+
+ if (size_cells == 2) {
+ vals = cell[i + 1];
+ vals <<= 32;
+ vals |= cell[i];
+ vals = fdt64_to_cpu(vals);
+
+ debug("%s: size64=%llx, ptr=%p, cell=%p\n",
+ __func__, vals, p, &cell[i]);
+ *(phys_size_t *)p = vals;
+ } else {
+ debug("%s: size32=%x, ptr=%p\n",
+ __func__, fdt32_to_cpu(cell[i]), p);
+ *(phys_size_t *)p = fdt32_to_cpu(cell[i]);
+ }
+ p += sizeof(phys_size_t);
+ i += size_cells;
+
+ debug("%s: ps=%p, i=%x, size=%zu\n",
+ __func__, p, i, sizeof(phys_size_t));
+ }
+
+ /* Return the first address size */
+ return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
+}
+
+#define FDT_REG_SIZE sizeof(u32)
+/* Temp location for sharing data for storing */
+/* Up to 64-bit address + 64-bit size */
+static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
+
+void dram_init_banksize(void)
+{
+ int bank;
+
+ memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ debug("Bank #%d: start %llx\n", bank,
+ (unsigned long long)gd->bd->bi_dram[bank].start);
+ debug("Bank #%d: size %llx\n", bank,
+ (unsigned long long)gd->bd->bi_dram[bank].size);
+ }
+}
+
int dram_init(void)
{
- int node;
- fdt_addr_t addr;
- fdt_size_t size;
+ int node, len;
const void *blob = gd->fdt_blob;
+ const u32 *cell;
- node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
- "memory", 7);
- if (node == -FDT_ERR_NOTFOUND) {
- debug("ZYNQ DRAM: Can't get memory node\n");
- return -1;
+ memset(&tmp, 0, sizeof(tmp));
+
+ /* find or create "/memory" node. */
+ node = fdt_subnode_offset(blob, 0, "memory");
+ if (node < 0) {
+ printf("%s: Can't get memory node\n", __func__);
+ return node;
}
- addr = fdtdec_get_addr_size(blob, node, "reg", &size);
- if (addr == FDT_ADDR_T_NONE || size == 0) {
- debug("ZYNQ DRAM: Can't get base address or size\n");
+
+ /* Get pointer to cells and lenght of it */
+ cell = fdt_getprop(blob, node, "reg", &len);
+ if (!cell) {
+ printf("%s: Can't get reg property\n", __func__);
return -1;
}
- gd->ram_size = size;
+
+ gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
+
+ debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
+
+ zynq_ddrc_init();
+
+ return 0;
+}
+#else
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
zynq_ddrc_init();
return 0;
}
+#endif
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 087578c..132d724 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -6,7 +6,6 @@
*/
#include <common.h>
-#include <netdev.h>
#include <sata.h>
#include <ahci.h>
#include <scsi.h>
@@ -63,8 +62,8 @@
int address_cells = fdt_address_cells(fdt, parent_offset);
int size_cells = fdt_size_cells(fdt, parent_offset);
char *p = buf;
- phys_addr_t val;
- phys_size_t vals;
+ u64 val;
+ u64 vals;
debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
__func__, address_cells, size_cells, buf, cell);
@@ -166,7 +165,7 @@
gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
- debug("%s: Initial DRAM size %llx\n", __func__, gd->ram_size);
+ debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
return 0;
}
diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
index 91ae10a..daafb61 100644
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ b/configs/xilinx_zynqmp_ep_defconfig
@@ -1,6 +1,9 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep"
CONFIG_ARCH_ZYNQMP=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
CONFIG_ZYNQMP_USB=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
@@ -15,7 +18,9 @@
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_I2C=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
@@ -26,8 +31,11 @@
CONFIG_CMD_TIMER=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
CONFIG_NAND_ARASAN=y
+CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
new file mode 100644
index 0000000..366aba2
--- /dev/null
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@@ -0,0 +1,37 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm015_dc1"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
new file mode 100644
index 0000000..6197ad5
--- /dev/null
+++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
@@ -0,0 +1,35 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm016_dc2"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_DM_MMC=y
+CONFIG_NAND_ARASAN=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
new file mode 100644
index 0000000..a9b68de
--- /dev/null
+++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm019_dc5"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_DM_ETH=y
diff --git a/configs/xilinx_zynqmp_zcu102_defconfig b/configs/xilinx_zynqmp_zcu102_defconfig
new file mode 100644
index 0000000..50a957c
--- /dev/null
+++ b/configs/xilinx_zynqmp_zcu102_defconfig
@@ -0,0 +1,34 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu102"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
new file mode 100644
index 0000000..5bd8248
--- /dev/null
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -0,0 +1,34 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu102"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 1d70e43..bd261c1 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -21,3 +21,7 @@
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_ZYNQ_GEM=y
CONFIG_ZYNQ_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/doc/device-tree-bindings/i2c/i2c-cdns.txt b/doc/device-tree-bindings/i2c/i2c-cdns.txt
new file mode 100644
index 0000000..202e0b7
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/i2c-cdns.txt
@@ -0,0 +1,20 @@
+Cadence I2C controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Should be "cdns,i2c-r1p10" or "xlnx,zynq-spi-r1p10".
+- reg : Physical base address and size of I2C registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller
+- clocks : Clock phandles (see clock bindings for details).
+
+Example:
+ i2c0: i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ reg = <0xe0004000 0x1000>;
+ clocks = <&clkc 38>;
+ interrupts = <0 25 4>;
+ interrupt-parent = <&intc>;
+ status = "disabled";
+ };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f56a606..2b4624d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -136,4 +136,11 @@
help
Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
+config ZYNQ_GPIO
+ bool "Zynq GPIO driver"
+ depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ default y
+ help
+ Supports GPIO access on Zynq SoC.
+
endmenu
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 932dfe9..238e028 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -217,7 +217,7 @@
/* All commands but "device" require 'maxargs' arguments */
if (!c || !((argc == (c->maxargs)) ||
- (((int)c->cmd == PCA953X_CMD_DEVICE) &&
+ (((long)c->cmd == PCA953X_CMD_DEVICE) &&
(argc == (c->maxargs - 1))))) {
return CMD_RET_USAGE;
}
@@ -230,7 +230,7 @@
if (argc > 3)
ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;
- switch ((int)c->cmd) {
+ switch ((long)c->cmd) {
#ifdef CONFIG_CMD_PCA953X_INFO
case PCA953X_CMD_INFO:
ret = pca953x_info(chip);
diff --git a/drivers/gpio/zynq_gpio.c b/drivers/gpio/zynq_gpio.c
index 83a2c46..3a995f6 100644
--- a/drivers/gpio/zynq_gpio.c
+++ b/drivers/gpio/zynq_gpio.c
@@ -13,8 +13,143 @@
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/errno.h>
+#include <dm.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Maximum banks */
+#define ZYNQ_GPIO_MAX_BANK 4
+
+#define ZYNQ_GPIO_BANK0_NGPIO 32
+#define ZYNQ_GPIO_BANK1_NGPIO 22
+#define ZYNQ_GPIO_BANK2_NGPIO 32
+#define ZYNQ_GPIO_BANK3_NGPIO 32
+
+#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
+ ZYNQ_GPIO_BANK1_NGPIO + \
+ ZYNQ_GPIO_BANK2_NGPIO + \
+ ZYNQ_GPIO_BANK3_NGPIO)
+
+#define ZYNQMP_GPIO_MAX_BANK 6
+
+#define ZYNQMP_GPIO_BANK0_NGPIO 26
+#define ZYNQMP_GPIO_BANK1_NGPIO 26
+#define ZYNQMP_GPIO_BANK2_NGPIO 26
+#define ZYNQMP_GPIO_BANK3_NGPIO 32
+#define ZYNQMP_GPIO_BANK4_NGPIO 32
+#define ZYNQMP_GPIO_BANK5_NGPIO 32
+
+#define ZYNQMP_GPIO_NR_GPIOS 174
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
+#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
+#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
+
+/* Register offsets for the GPIO device */
+/* LSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
+/* MSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
+/* Data Register-RW */
+#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
+/* Direction mode reg-RW */
+#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
+/* Output enable reg-RW */
+#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
+/* Interrupt mask reg-RO */
+#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
+/* Interrupt enable reg-WO */
+#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
+/* Interrupt disable reg-WO */
+#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
+/* Interrupt status reg-RO */
+#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
+/* Interrupt type reg-RW */
+#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
+/* Interrupt polarity reg-RW */
+#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
+/* Interrupt on any, reg-RW */
+#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
+
+/* Disable all interrupts mask */
+#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
+
+/* Mid pin number of a bank */
+#define ZYNQ_GPIO_MID_PIN_NUM 16
+
+/* GPIO upper 16 bit mask */
+#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+
+struct zynq_gpio_privdata {
+ phys_addr_t base;
+ const struct zynq_platform_data *p_data;
+};
/**
+ * struct zynq_platform_data - zynq gpio platform data structure
+ * @label: string to store in gpio->label
+ * @ngpio: max number of gpio pins
+ * @max_bank: maximum number of gpio banks
+ * @bank_min: this array represents bank's min pin
+ * @bank_max: this array represents bank's max pin
+ */
+struct zynq_platform_data {
+ const char *label;
+ u16 ngpio;
+ int max_bank;
+ int bank_min[ZYNQMP_GPIO_MAX_BANK];
+ int bank_max[ZYNQMP_GPIO_MAX_BANK];
+};
+
+static const struct zynq_platform_data zynqmp_gpio_def = {
+ .label = "zynqmp_gpio",
+ .ngpio = ZYNQMP_GPIO_NR_GPIOS,
+ .max_bank = ZYNQMP_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
+ .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
+ .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
+ .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
+ .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
+};
+
+static const struct zynq_platform_data zynq_gpio_def = {
+ .label = "zynq_gpio",
+ .ngpio = ZYNQ_GPIO_NR_GPIOS,
+ .max_bank = ZYNQ_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
+};
+
+/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
* for a given pin in the GPIO device
* @pin_num: gpio pin number within the device
@@ -27,88 +162,71 @@
*/
static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
unsigned int *bank_num,
- unsigned int *bank_pin_num)
+ unsigned int *bank_pin_num,
+ struct udevice *dev)
{
- switch (pin_num) {
- case ZYNQ_GPIO_BANK0_PIN_MIN ... ZYNQ_GPIO_BANK0_PIN_MAX:
- *bank_num = 0;
- *bank_pin_num = pin_num;
- break;
- case ZYNQ_GPIO_BANK1_PIN_MIN ... ZYNQ_GPIO_BANK1_PIN_MAX:
- *bank_num = 1;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK1_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK2_PIN_MIN ... ZYNQ_GPIO_BANK2_PIN_MAX:
- *bank_num = 2;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK2_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK3_PIN_MIN ... ZYNQ_GPIO_BANK3_PIN_MAX:
- *bank_num = 3;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK3_PIN_MIN;
- break;
- default:
- printf("invalid GPIO pin number: %u\n", pin_num);
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+ int bank;
+
+ for (bank = 0; bank < priv->p_data->max_bank; bank++) {
+ if ((pin_num >= priv->p_data->bank_min[bank]) &&
+ (pin_num <= priv->p_data->bank_max[bank])) {
+ *bank_num = bank;
+ *bank_pin_num = pin_num -
+ priv->p_data->bank_min[bank];
+ return;
+ }
+ }
+
+ if (bank >= priv->p_data->max_bank) {
+ printf("Inavlid bank and pin num\n");
*bank_num = 0;
*bank_pin_num = 0;
- break;
}
}
-int gpio_is_valid(unsigned gpio)
+static int gpio_is_valid(unsigned gpio, struct udevice *dev)
{
- return (gpio >= 0) && (gpio < ZYNQ_GPIO_NR_GPIOS);
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+
+ return (gpio >= 0) && (gpio < priv->p_data->ngpio);
}
-static int check_gpio(unsigned gpio)
+static int check_gpio(unsigned gpio, struct udevice *dev)
{
- if (!gpio_is_valid(gpio)) {
+ if (!gpio_is_valid(gpio, dev)) {
printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
return -1;
}
return 0;
}
-/**
- * gpio_get_value - Get the state of the specified pin of GPIO device
- * @gpio: gpio pin number within the device
- *
- * This function reads the state of the specified pin of the GPIO device.
- *
- * Return: 0 if the pin is low, 1 if pin is high.
- */
-int gpio_get_value(unsigned gpio)
+static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
{
u32 data;
unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
- data = readl(ZYNQ_GPIO_BASE_ADDRESS +
+ data = readl(priv->base +
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
return (data >> bank_pin_num) & 1;
}
-/**
- * gpio_set_value - Modify the value of the pin with specified value
- * @gpio: gpio pin number within the device
- * @value: value used to modify the value of the specified pin
- *
- * This function calculates the register offset (i.e to lower 16 bits or
- * upper 16 bits) based on the given pin number and sets the value of a
- * gpio pin to the specified value. The value is either 0 or non-zero.
- */
-int gpio_set_value(unsigned gpio, int value)
+static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
{
unsigned int reg_offset, bank_num, bank_pin_num;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
/* only 16 data bits in bit maskable reg */
@@ -126,95 +244,127 @@
value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
- writel(value, ZYNQ_GPIO_BASE_ADDRESS + reg_offset);
+ writel(value, priv->base + reg_offset);
return 0;
}
-/**
- * gpio_direction_input - Set the direction of the specified GPIO pin as input
- * @gpio: gpio pin number within the device
- *
- * This function uses the read-modify-write sequence to set the direction of
- * the gpio pin as input.
- *
- * Return: -1 if invalid gpio specified, 0 if successul
- */
-int gpio_direction_input(unsigned gpio)
+static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
return -1;
/* clear the bit in direction mode reg to set the pin as input */
- reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg &= ~BIT(bank_pin_num);
- writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
return 0;
}
-/**
- * gpio_direction_output - Set the direction of the specified GPIO pin as output
- * @gpio: gpio pin number within the device
- * @value: value to be written to specified pin
- *
- * This function sets the direction of specified GPIO pin as output, configures
- * the Output Enable register for the pin and uses zynq_gpio_set to set
- * the value of the pin to the value specified.
- *
- * Return: 0 always
- */
-int gpio_direction_output(unsigned gpio, int value)
+static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
+ int value)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* set the GPIO pin as output */
- reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
- writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
/* configure the output enable reg for the pin */
- reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+ reg = readl(priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
- writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+ writel(reg, priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
/* set the state of the pin */
gpio_set_value(gpio, value);
return 0;
}
-/**
- * Request a gpio before using it.
- *
- * NOTE: Argument 'label' is unused.
- */
-int gpio_request(unsigned gpio, const char *label)
+static const struct dm_gpio_ops gpio_zynq_ops = {
+ .direction_input = zynq_gpio_direction_input,
+ .direction_output = zynq_gpio_direction_output,
+ .get_value = zynq_gpio_get_value,
+ .set_value = zynq_gpio_set_value,
+};
+
+static const struct udevice_id zynq_gpio_ids[] = {
+ { .compatible = "xlnx,zynq-gpio-1.0",
+ .data = (ulong)&zynq_gpio_def},
+ { .compatible = "xlnx,zynqmp-gpio-1.0",
+ .data = (ulong)&zynqmp_gpio_def},
+ { }
+};
+
+static void zynq_gpio_getplat_data(struct udevice *dev)
{
- if (check_gpio(gpio) < 0)
- return -1;
+ const struct udevice_id *of_match = zynq_gpio_ids;
+ int ret;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+
+ while (of_match->compatible) {
+ ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ of_match->compatible);
+ if (ret >= 0) {
+ priv->p_data =
+ (struct zynq_platform_data *)of_match->data;
+ break;
+ } else {
+ of_match++;
+ continue;
+ }
+ }
+
+ if (!priv->p_data)
+ printf("No Platform data found\n");
+}
+
+static int zynq_gpio_probe(struct udevice *dev)
+{
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ zynq_gpio_getplat_data(dev);
+
+ if (priv->p_data)
+ uc_priv->gpio_count = priv->p_data->ngpio;
return 0;
}
-/**
- * Reset and free the gpio after using it.
- */
-int gpio_free(unsigned gpio)
+static int zynq_gpio_ofdata_to_platdata(struct udevice *dev)
{
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+
+ priv->base = dev_get_addr(dev);
+
return 0;
}
+
+U_BOOT_DRIVER(gpio_zynq) = {
+ .name = "gpio_zynq",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_zynq_ops,
+ .of_match = zynq_gpio_ids,
+ .ofdata_to_platdata = zynq_gpio_ofdata_to_platdata,
+ .probe = zynq_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct zynq_gpio_privdata),
+};
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 46b83e7..9324c6c 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -58,6 +58,13 @@
bindings are supported.
Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
+config SYS_I2C_CADENCE
+ tristate "Cadence I2C Controller"
+ depends on DM_I2C && (ARCH_ZYNQ || ARM64)
+ help
+ Say yes here to select Cadence I2C Host Controller. This controller is
+ e.g. used by Xilinx Zynq.
+
config SYS_I2C_INTEL
bool "Intel I2C/SMBUS driver"
depends on DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c75c579..167424d 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
obj-$(CONFIG_SYS_I2C) += i2c_core.o
+obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
diff --git a/drivers/i2c/i2c-cdns.c b/drivers/i2c/i2c-cdns.c
new file mode 100644
index 0000000..909cea2
--- /dev/null
+++ b/drivers/i2c/i2c-cdns.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2015 Moritz Fischer <moritz.fischer@ettus.com>
+ * IP from Cadence (ID T-CS-PE-0007-100, Version R1p10f2)
+ *
+ * This file is based on: drivers/i2c/zynq_i2c.c,
+ * with added driver-model support and code cleanup.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/errno.h>
+#include <dm/device.h>
+#include <dm/root.h>
+#include <i2c.h>
+#include <fdtdec.h>
+#include <mapmem.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* i2c register set */
+struct cdns_i2c_regs {
+ u32 control;
+ u32 status;
+ u32 address;
+ u32 data;
+ u32 interrupt_status;
+ u32 transfer_size;
+ u32 slave_mon_pause;
+ u32 time_out;
+ u32 interrupt_mask;
+ u32 interrupt_enable;
+ u32 interrupt_disable;
+};
+
+/* Control register fields */
+#define CDNS_I2C_CONTROL_RW 0x00000001
+#define CDNS_I2C_CONTROL_MS 0x00000002
+#define CDNS_I2C_CONTROL_NEA 0x00000004
+#define CDNS_I2C_CONTROL_ACKEN 0x00000008
+#define CDNS_I2C_CONTROL_HOLD 0x00000010
+#define CDNS_I2C_CONTROL_SLVMON 0x00000020
+#define CDNS_I2C_CONTROL_CLR_FIFO 0x00000040
+#define CDNS_I2C_CONTROL_DIV_B_SHIFT 8
+#define CDNS_I2C_CONTROL_DIV_B_MASK 0x00003F00
+#define CDNS_I2C_CONTROL_DIV_A_SHIFT 14
+#define CDNS_I2C_CONTROL_DIV_A_MASK 0x0000C000
+
+/* Status register values */
+#define CDNS_I2C_STATUS_RXDV 0x00000020
+#define CDNS_I2C_STATUS_TXDV 0x00000040
+#define CDNS_I2C_STATUS_RXOVF 0x00000080
+#define CDNS_I2C_STATUS_BA 0x00000100
+
+/* Interrupt register fields */
+#define CDNS_I2C_INTERRUPT_COMP 0x00000001
+#define CDNS_I2C_INTERRUPT_DATA 0x00000002
+#define CDNS_I2C_INTERRUPT_NACK 0x00000004
+#define CDNS_I2C_INTERRUPT_TO 0x00000008
+#define CDNS_I2C_INTERRUPT_SLVRDY 0x00000010
+#define CDNS_I2C_INTERRUPT_RXOVF 0x00000020
+#define CDNS_I2C_INTERRUPT_TXOVF 0x00000040
+#define CDNS_I2C_INTERRUPT_RXUNF 0x00000080
+#define CDNS_I2C_INTERRUPT_ARBLOST 0x00000200
+
+#define CDNS_I2C_FIFO_DEPTH 16
+#define CDNS_I2C_TRANSFER_SIZE_MAX 255 /* Controller transfer limit */
+
+#ifdef DEBUG
+static void cdns_i2c_debug_status(struct cdns_i2c_regs *cdns_i2c)
+{
+ int int_status;
+ int status;
+ int_status = readl(&cdns_i2c->interrupt_status);
+
+ status = readl(&cdns_i2c->status);
+ if (int_status || status) {
+ debug("Status: ");
+ if (int_status & CDNS_I2C_INTERRUPT_COMP)
+ debug("COMP ");
+ if (int_status & CDNS_I2C_INTERRUPT_DATA)
+ debug("DATA ");
+ if (int_status & CDNS_I2C_INTERRUPT_NACK)
+ debug("NACK ");
+ if (int_status & CDNS_I2C_INTERRUPT_TO)
+ debug("TO ");
+ if (int_status & CDNS_I2C_INTERRUPT_SLVRDY)
+ debug("SLVRDY ");
+ if (int_status & CDNS_I2C_INTERRUPT_RXOVF)
+ debug("RXOVF ");
+ if (int_status & CDNS_I2C_INTERRUPT_TXOVF)
+ debug("TXOVF ");
+ if (int_status & CDNS_I2C_INTERRUPT_RXUNF)
+ debug("RXUNF ");
+ if (int_status & CDNS_I2C_INTERRUPT_ARBLOST)
+ debug("ARBLOST ");
+ if (status & CDNS_I2C_STATUS_RXDV)
+ debug("RXDV ");
+ if (status & CDNS_I2C_STATUS_TXDV)
+ debug("TXDV ");
+ if (status & CDNS_I2C_STATUS_RXOVF)
+ debug("RXOVF ");
+ if (status & CDNS_I2C_STATUS_BA)
+ debug("BA ");
+ debug("TS%d ", readl(&cdns_i2c->transfer_size));
+ debug("\n");
+ }
+}
+#endif
+
+struct i2c_cdns_bus {
+ int id;
+ struct cdns_i2c_regs __iomem *regs; /* register base */
+};
+
+
+/** cdns_i2c_probe() - Probe method
+ * @dev: udevice pointer
+ *
+ * DM callback called when device is probed
+ */
+static int cdns_i2c_probe(struct udevice *dev)
+{
+ struct i2c_cdns_bus *bus = dev_get_priv(dev);
+
+ bus->regs = (struct cdns_i2c_regs *)dev_get_addr(dev);
+ if (!bus->regs)
+ return -ENOMEM;
+
+ /* TODO: Calculate dividers based on CPU_CLK_1X */
+ /* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */
+ writel((16 << CDNS_I2C_CONTROL_DIV_B_SHIFT) |
+ (2 << CDNS_I2C_CONTROL_DIV_A_SHIFT), &bus->regs->control);
+
+ /* Enable master mode, ack, and 7-bit addressing */
+ setbits_le32(&bus->regs->control, CDNS_I2C_CONTROL_MS |
+ CDNS_I2C_CONTROL_ACKEN | CDNS_I2C_CONTROL_NEA);
+
+ debug("%s bus %d at %p\n", __func__, dev->seq, bus->regs);
+
+ return 0;
+}
+
+static int cdns_i2c_remove(struct udevice *dev)
+{
+ struct i2c_cdns_bus *bus = dev_get_priv(dev);
+
+ debug("%s bus %d at %p\n", __func__, dev->seq, bus->regs);
+
+ unmap_sysmem(bus->regs);
+
+ return 0;
+}
+
+/* Wait for an interrupt */
+static u32 cdns_i2c_wait(struct cdns_i2c_regs *cdns_i2c, u32 mask)
+{
+ int timeout, int_status;
+
+ for (timeout = 0; timeout < 100; timeout++) {
+ udelay(100);
+ int_status = readl(&cdns_i2c->interrupt_status);
+ if (int_status & mask)
+ break;
+ }
+
+ /* Clear interrupt status flags */
+ writel(int_status & mask, &cdns_i2c->interrupt_status);
+
+ return int_status & mask;
+}
+
+static int cdns_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
+{
+ if (speed != 100000) {
+ printf("%s, failed to set clock speed to %u\n", __func__,
+ speed);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Probe to see if a chip is present. */
+static int cdns_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
+{
+ struct i2c_cdns_bus *i2c_bus = dev_get_priv(bus);
+ struct cdns_i2c_regs *regs = i2c_bus->regs;
+
+ /* Attempt to read a byte */
+ setbits_le32(®s->control, CDNS_I2C_CONTROL_CLR_FIFO |
+ CDNS_I2C_CONTROL_RW);
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_HOLD);
+ writel(0xFF, ®s->interrupt_status);
+ writel(chip_addr, ®s->address);
+ writel(1, ®s->transfer_size);
+
+ return (cdns_i2c_wait(regs, CDNS_I2C_INTERRUPT_COMP |
+ CDNS_I2C_INTERRUPT_NACK) &
+ CDNS_I2C_INTERRUPT_COMP) ? 0 : -ETIMEDOUT;
+}
+
+static int cdns_i2c_write_data(struct i2c_cdns_bus *i2c_bus, u32 addr, u8 *data,
+ u32 len, bool next_is_read)
+{
+ u8 *cur_data = data;
+
+ struct cdns_i2c_regs *regs = i2c_bus->regs;
+
+ setbits_le32(®s->control, CDNS_I2C_CONTROL_CLR_FIFO |
+ CDNS_I2C_CONTROL_HOLD);
+
+ /* if next is a read, we need to clear HOLD, doesn't work */
+ if (next_is_read)
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_HOLD);
+
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_RW);
+
+ writel(0xFF, ®s->interrupt_status);
+ writel(addr, ®s->address);
+
+ while (len--) {
+ writel(*(cur_data++), ®s->data);
+ if (readl(®s->transfer_size) == CDNS_I2C_FIFO_DEPTH) {
+ if (!cdns_i2c_wait(regs, CDNS_I2C_INTERRUPT_COMP)) {
+ /* Release the bus */
+ clrbits_le32(®s->control,
+ CDNS_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ }
+ }
+
+ /* All done... release the bus */
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_HOLD);
+ /* Wait for the address and data to be sent */
+ if (!cdns_i2c_wait(regs, CDNS_I2C_INTERRUPT_COMP))
+ return -ETIMEDOUT;
+ return 0;
+}
+
+static int cdns_i2c_read_data(struct i2c_cdns_bus *i2c_bus, u32 addr, u8 *data,
+ u32 len)
+{
+ u32 status;
+ u32 i = 0;
+ u8 *cur_data = data;
+
+ /* TODO: Fix this */
+ struct cdns_i2c_regs *regs = i2c_bus->regs;
+
+ /* Check the hardware can handle the requested bytes */
+ if ((len < 0) || (len > CDNS_I2C_TRANSFER_SIZE_MAX))
+ return -EINVAL;
+
+ setbits_le32(®s->control, CDNS_I2C_CONTROL_CLR_FIFO |
+ CDNS_I2C_CONTROL_RW);
+
+ /* Start reading data */
+ writel(addr, ®s->address);
+ writel(len, ®s->transfer_size);
+
+ /* Wait for data */
+ do {
+ status = cdns_i2c_wait(regs, CDNS_I2C_INTERRUPT_COMP |
+ CDNS_I2C_INTERRUPT_DATA);
+ if (!status) {
+ /* Release the bus */
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_HOLD);
+ return -ETIMEDOUT;
+ }
+ debug("Read %d bytes\n",
+ len - readl(®s->transfer_size));
+ for (; i < len - readl(®s->transfer_size); i++)
+ *(cur_data++) = readl(®s->data);
+ } while (readl(®s->transfer_size) != 0);
+ /* All done... release the bus */
+ clrbits_le32(®s->control, CDNS_I2C_CONTROL_HOLD);
+
+#ifdef DEBUG
+ cdns_i2c_debug_status(regs);
+#endif
+ return 0;
+}
+
+static int cdns_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct i2c_cdns_bus *i2c_bus = dev_get_priv(dev);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
+
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD) {
+ ret = cdns_i2c_read_data(i2c_bus, msg->addr, msg->buf,
+ msg->len);
+ } else {
+ ret = cdns_i2c_write_data(i2c_bus, msg->addr, msg->buf,
+ msg->len, next_is_read);
+ }
+ if (ret) {
+ debug("i2c_write: error sending\n");
+ return -EREMOTEIO;
+ }
+ }
+
+ return 0;
+}
+
+static const struct dm_i2c_ops cdns_i2c_ops = {
+ .xfer = cdns_i2c_xfer,
+ .probe_chip = cdns_i2c_probe_chip,
+ .set_bus_speed = cdns_i2c_set_bus_speed,
+};
+
+static const struct udevice_id cdns_i2c_of_match[] = {
+ { .compatible = "cdns,i2c-r1p10" },
+ { /* end of table */ }
+};
+
+U_BOOT_DRIVER(cdns_i2c) = {
+ .name = "i2c-cdns",
+ .id = UCLASS_I2C,
+ .of_match = cdns_i2c_of_match,
+ .probe = cdns_i2c_probe,
+ .remove = cdns_i2c_remove,
+ .priv_auto_alloc_size = sizeof(struct i2c_cdns_bus),
+ .ops = &cdns_i2c_ops,
+};
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 8cea610..f7b4643 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -17,7 +17,6 @@
#define CONFIG_SYS_NO_FLASH
-
/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE 0xF9010000
@@ -44,8 +43,6 @@
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-/* Flat Device Tree Definitions */
-
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
# define COUNTER_FREQUENCY 100000000
@@ -165,8 +162,7 @@
"kernel_addr=0x80000\0" \
"fdt_addr=0x7000000\0" \
"fdt_high=0x10000000\0" \
- "kernel_size=0x2000000\0" \
- "fdt_size=0x80000\0" \
+ CONFIG_KERNEL_FDT_OFST_SIZE \
"sdbootdev=0\0"\
"sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
"load mmc $sdbootdev:$partid $kernel_addr Image && " \
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index aa58b62..9506355 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -15,8 +15,6 @@
#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9)
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_SYS_I2C_ZYNQ
#define CONFIG_ZYNQ_EEPROM
#define CONFIG_AHCI
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
@@ -24,6 +22,13 @@
#define COUNTER_FREQUENCY 4000000
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=ep108\0"
+
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_EP_H */
diff --git a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h
new file mode 100644
index 0000000..3c0ba88
--- /dev/null
+++ b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h
@@ -0,0 +1,29 @@
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM015 DC1
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H
+#define __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_SDHCI1
+#define CONFIG_AHCI
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc1\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */
diff --git a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h
new file mode 100644
index 0000000..83ea624
--- /dev/null
+++ b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h
@@ -0,0 +1,26 @@
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM016 DC2
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H
+#define __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H
+
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB1_XHCI_BASEADDR}
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc2\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */
diff --git a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h
new file mode 100644
index 0000000..4f8f5c1
--- /dev/null
+++ b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h
@@ -0,0 +1,27 @@
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM019 DC5
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H
+#define __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H
+
+#define CONFIG_ZYNQ_SDHCI0
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc5\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
new file mode 100644
index 0000000..30db2e4
--- /dev/null
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -0,0 +1,60 @@
+/*
+ * Configuration for Xilinx ZynqMP zcu102
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZCU102_H
+#define __CONFIG_ZYNQMP_ZCU102_H
+
+#define CONFIG_ZYNQ_SDHCI1
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_I2C1
+#define CONFIG_SYS_I2C_MAX_HOPS 1
+#define CONFIG_SYS_NUM_I2C_BUSES 18
+#define CONFIG_SYS_I2C_BUSES { \
+ {0, {I2C_NULL_HOP} }, \
+ {0, {{I2C_MUX_PCA9544, 0x75, 0} } }, \
+ {0, {{I2C_MUX_PCA9544, 0x75, 1} } }, \
+ {0, {{I2C_MUX_PCA9544, 0x75, 2} } }, \
+ {1, {I2C_NULL_HOP} }, \
+ {1, {{I2C_MUX_PCA9548, 0x74, 0} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x74, 1} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x74, 2} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x74, 3} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x74, 4} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 0} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 1} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 2} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 3} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 4} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 5} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 6} } }, \
+ {1, {{I2C_MUX_PCA9548, 0x75, 7} } }, \
+ }
+
+#define CONFIG_SYS_I2C_ZYNQ
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+
+#define CONFIG_AHCI
+#define CONFIG_SATA_CEVA
+
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x180000\0" \
+ "fdt_offset=0x100000\0" \
+ "kernel_size=0x1e00000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zcu102\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZCU102_H */
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index d8e3fa4..49d9fd0 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -39,8 +39,6 @@
#define CONFIG_ARM_DCC
#define CONFIG_ZYNQ_SERIAL
-#define CONFIG_ZYNQ_GPIO
-
/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_MII
@@ -114,6 +112,7 @@
# define CONFIG_USB_CABLE_CHECK
# define CONFIG_CMD_DFU
# define CONFIG_CMD_THOR_DOWNLOAD
+# define CONFIG_THOR_RESET_OFF
# define CONFIG_USB_FUNCTION_THOR
# define DFU_ALT_INFO_RAM \
"dfu_ram_info=" \
@@ -277,15 +276,17 @@
/* Physical Memory map */
#define CONFIG_SYS_TEXT_BASE 0x4000000
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0
+#ifndef CONFIG_NR_DRAM_BANKS
+# define CONFIG_NR_DRAM_BANKS 1
+#endif
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+#define CONFIG_SYS_MEMTEST_START 0
+#define CONFIG_SYS_MEMTEST_END 0x1000
#define CONFIG_SYS_MALLOC_LEN 0x1400000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
index e66088d..ec7bb1c 100644
--- a/include/configs/zynq_microzed.h
+++ b/include/configs/zynq_microzed.h
@@ -12,6 +12,8 @@
#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ZYNQ_USB
+
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */