mmc: fix response timeout after switch command
After issuing the switch command: Wait until 'current state' of the card
status becomes 'tran'. This prevents from response timeout at the next
command because of 'current state' = 'data'.
Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index d67af80..b4c8e7f 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -841,7 +841,8 @@
value);
return -EIO;
}
- if (!ret && (status & MMC_STATUS_RDY_FOR_DATA))
+ if (!ret && (status & MMC_STATUS_RDY_FOR_DATA) &&
+ (status & MMC_STATUS_CURR_STATE) == MMC_STATE_TRANS)
return 0;
udelay(100);
} while (get_timer(start) < timeout_ms);
diff --git a/include/mmc.h b/include/mmc.h
index c12c7a0..effccaa 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -178,6 +178,7 @@
#define MMC_STATUS_ERROR (1 << 19)
#define MMC_STATE_PRG (7 << 9)
+#define MMC_STATE_TRANS (4 << 9)
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */