powerpc: P5040: Remove macro CONFIG_P5040
Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up
existing macros.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 808144e..9aef492 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -56,6 +56,7 @@
config TARGET_P5040DS
bool "Support P5040DS"
select PHYS_64BIT
+ select ARCH_P5040
config TARGET_MPC8536DS
bool "Support MPC8536DS"
@@ -328,6 +329,9 @@
config ARCH_P5020
bool
+config ARCH_P5040
+ bool
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index edd365a..7c1dbb9 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -43,7 +43,7 @@
obj-$(CONFIG_ARCH_P3041) += p3041_ids.o
obj-$(CONFIG_ARCH_P4080) += p4080_ids.o
obj-$(CONFIG_ARCH_P5020) += p5020_ids.o
-obj-$(CONFIG_PPC_P5040) += p5040_ids.o
+obj-$(CONFIG_ARCH_P5040) += p5040_ids.o
obj-$(CONFIG_PPC_T4240) += t4240_ids.o
obj-$(CONFIG_PPC_T4160) += t4240_ids.o
obj-$(CONFIG_PPC_T4080) += t4240_ids.o
@@ -85,7 +85,7 @@
obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o
obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o
obj-$(CONFIG_ARCH_P5020) += p5020_serdes.o
-obj-$(CONFIG_PPC_P5040) += p5040_serdes.o
+obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o
obj-$(CONFIG_PPC_T4240) += t4240_serdes.o
obj-$(CONFIG_PPC_T4160) += t4240_serdes.o
obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 20d039f..45b6bdc 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -491,7 +491,7 @@
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
serdes_corenet_t *srds2_regs;
#endif
int lane, bank, idx;
@@ -577,7 +577,7 @@
}
}
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
/*
* Lanes on bank 4 on P5040 are commented-out, but for some SERDES
* protocols, these lanes are routed to SATA. We use serdes_prtcl_map
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 496b845..23ee8f9 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -465,7 +465,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20
-#elif defined(CONFIG_PPC_P5040)
+#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_PPC64
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 47c3d98..7de554a 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -61,7 +61,7 @@
#if defined(CONFIG_ARCH_P3041) || \
defined(CONFIG_ARCH_P4080) || \
defined(CONFIG_ARCH_P5020) || \
- defined(CONFIG_PPC_P5040) || \
+ defined(CONFIG_ARCH_P5040) || \
defined(CONFIG_ARCH_P2041)
#define CONFIG_FSL_TRUST_ARCH_v1
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 759671a..b8b5379 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1866,7 +1866,7 @@
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
#endif
-#if defined(CONFIG_PPC_P5040)
+#if defined(CONFIG_ARCH_P5040)
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000
diff --git a/board/varisys/cyrus/eth.c b/board/varisys/cyrus/eth.c
index bcadc67..fc2192a 100644
--- a/board/varisys/cyrus/eth.c
+++ b/board/varisys/cyrus/eth.c
@@ -19,7 +19,7 @@
#define FIRST_PORT_ADDR 3
#define SECOND_PORT_ADDR 7
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
#define FIRST_PORT FM1_DTSEC5
#define SECOND_PORT FM2_DTSEC5
#else
@@ -83,7 +83,7 @@
fm_disable_port(i);
}
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
for (i = FM2_DTSEC2; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
if (!IS_VALID_PORT(i))
fm_disable_port(i);
diff --git a/configs/Cyrus_P5040_defconfig b/configs/Cyrus_P5040_defconfig
index e33340b..4b50772 100644
--- a/configs/Cyrus_P5040_defconfig
+++ b/configs/Cyrus_P5040_defconfig
@@ -5,7 +5,7 @@
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5040"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,ARCH_P5040"
CONFIG_BOOTDELAY=10
CONFIG_CONSOLE_MUX=y
CONFIG_HUSH_PARSER=y
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 15d27b8..d9bcec5 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -23,7 +23,7 @@
obj-$(CONFIG_ARCH_P3041) += p5020.o
obj-$(CONFIG_ARCH_P4080) += p4080.o
obj-$(CONFIG_ARCH_P5020) += p5020.o
-obj-$(CONFIG_PPC_P5040) += p5040.o
+obj-$(CONFIG_ARCH_P5040) += p5040.o
obj-$(CONFIG_PPC_T1040) += t1040.o
obj-$(CONFIG_PPC_T1042) += t1040.o
obj-$(CONFIG_PPC_T1020) += t1040.o
diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h
index dc82721..548d091 100644
--- a/include/configs/P5040DS.h
+++ b/include/configs/P5040DS.h
@@ -9,7 +9,6 @@
*
*/
#define CONFIG_P5040DS
-#define CONFIG_PPC_P5040
#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h
index 5f5138a..13e4690 100644
--- a/include/configs/cyrus.h
+++ b/include/configs/cyrus.h
@@ -9,7 +9,7 @@
#define CONFIG_CYRUS
-#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_PPC_P5040)
+#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
#error Must call Cyrus CONFIG with a specific CPU enabled.
#endif
@@ -33,7 +33,7 @@
#if defined(CONFIG_ARCH_P5020)
#define CONFIG_SYS_CLK_FREQ 133000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
-#elif defined(CONFIG_PPC_P5040)
+#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
#endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4e97976..dca414a 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3643,7 +3643,6 @@
CONFIG_PPC_B4420
CONFIG_PPC_B4860
CONFIG_PPC_CLUSTER_START
-CONFIG_PPC_P5040
CONFIG_PPC_SPINTABLE_COMPATIBLE
CONFIG_PPC_T1023
CONFIG_PPC_T1024