board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access
A small delay between DRAM read access with wrong parameters and
reconfiguration is necessary.
Without a delay between DRAM read access and a following reconfiguration
this reconfiguration fails for certain DRAM chips (Nanya).
Signed-off-by: Michael Bode <michael.bode@bshg.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
diff --git a/board/bsh/imx6ulz_smm_m2/spl.c b/board/bsh/imx6ulz_smm_m2/spl.c
index e8255b6..c330e4d 100644
--- a/board/bsh/imx6ulz_smm_m2/spl.c
+++ b/board/bsh/imx6ulz_smm_m2/spl.c
@@ -13,6 +13,7 @@
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/boot_mode.h>
+#include <linux/delay.h>
#include <linux/libfdt.h>
#include <spl.h>
#include <asm/arch/mx6-ddr.h>
@@ -65,10 +66,12 @@
/* Already configured, nothing to do */
break;
case SZ_256M:
+ udelay(1);
ddr_cfg_write(&bsh_dram_timing_256mb);
break;
case SZ_128M:
default:
+ udelay(1);
ddr_cfg_write(&bsh_dram_timing_128mb);
break;
}