drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller
Currently the controller by default enables the Receive Detect feature in P3
mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive
detection in P3 mode.
Enabling the USB3 controller to configure USB in P2 mode whenever the Receive
Detect feature is required.
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c
index 183bf2b..f2bffba 100644
--- a/drivers/usb/common/fsl-errata.c
+++ b/drivers/usb/common/fsl-errata.c
@@ -190,4 +190,30 @@
return false;
}
+bool has_erratum_a010151(void)
+{
+ u32 svr = get_svr();
+ u32 soc = SVR_SOC_VER(svr);
+
+ switch (soc) {
+#ifdef CONFIG_ARM64
+ case SVR_LS2080A:
+ case SVR_LS2085A:
+ case SVR_LS1046A:
+ case SVR_LS1012A:
+ return IS_SVR_REV(svr, 1, 0);
+ case SVR_LS1043A:
+ return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
+#endif
+#ifdef CONFIG_LS102XA
+ case SOC_VER_LS1020:
+ case SOC_VER_LS1021:
+ case SOC_VER_LS1022:
+ case SOC_VER_SLS1020:
+ return IS_SVR_REV(svr, 2, 0);
+#endif
+ }
+ return false;
+}
+
#endif