board: ls1043ardb: fdt fixups for revision v7.0 boards
The LS1043ARDB rev v7.0 board replaces the AQR105 PHY on MAC9 with an
AQR113C PHY. The address of the PHY on the MDIO bus changes from 0x1 to
0x8. Enable CONFIG_OF_BOARD_FIXUP and update both u-boot and Linux device
trees to reflect this change.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 0a40bf0..cc06756 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -12,6 +12,7 @@
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
CONFIG_FSL_LS_PPA=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_NXP_ESBC=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index f27eadf..7b6080e 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -14,6 +14,7 @@
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
CONFIG_FSL_LS_PPA=y
CONFIG_ENV_ADDR=0x60300000
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index da23382..8347407 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -14,6 +14,7 @@
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_NXP_ESBC=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index 2be08bb..5402fbb 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -19,6 +19,7 @@
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index d9b841d..baac67f 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -15,6 +15,7 @@
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_NXP_ESBC=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 79feb55..ee9b886 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -20,6 +20,7 @@
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 3aafd10..1adf265 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -14,6 +14,7 @@
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_NXP_ESBC=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index f9cb304..78a383b 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -17,6 +17,7 @@
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_ENV_ADDR=0x60500000
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y