Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index d119a7d..038d479 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -256,11 +256,11 @@
if (version) {
/* set up the GP IO pins (for the Spunk board) */
- write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
- write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
- write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
- write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */
@@ -268,11 +268,11 @@
} else {
/* set up the GP IO pins (for the Hyglo board) */
- write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
- write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
- write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
- write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */
@@ -656,7 +656,7 @@
offset |= addr[i];
}
- return read_mmcr_byte(SC520_SYSINFO) ?
+ return read_mmcr_byte(SC520_SYSINFO) ?
spi_eeprom_read(1, offset, buffer, len) :
mw_eeprom_read(1, offset, buffer, len);
}
@@ -672,7 +672,7 @@
offset |= addr[i];
}
- return read_mmcr_byte(SC520_SYSINFO) ?
+ return read_mmcr_byte(SC520_SYSINFO) ?
spi_eeprom_write(1, offset, buffer, len) :
mw_eeprom_write(1, offset, buffer, len);
}
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
index 0127076..3430b6a 100644
--- a/board/sc520_spunk/sc520_spunk_asm.S
+++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -70,7 +70,7 @@
done: movl $0xfffefc32,%edx
movw $0000,(%edx)
- jmp *%ebp /* return to caller */
+ jmp *%ebp /* return to caller */
.globl show_boot_progress
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
index 887e0a0..33480d3 100644
--- a/board/sc520_spunk/u-boot.lds
+++ b/board/sc520_spunk/u-boot.lds
@@ -34,7 +34,7 @@
. = ALIGN(4);
.rodata : { *(.rodata) }
- . = 0x400000; /* Ram data segment to use */
+ . = 0x400000; /* Ram data segment to use */
_i386boot_romdata_dest = ABSOLUTE(.);
.data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
_i386boot_romdata_start = LOADADDR(.data);