diff --git a/arch/arm/dts/imx6ul-14x14-evk.dts b/arch/arm/dts/imx6ul-14x14-evk.dts
index a642d77..2438669 100644
--- a/arch/arm/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/dts/imx6ul-14x14-evk.dts
@@ -1,427 +1,13 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 
 #include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
 
 / {
 	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
 	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
-	aliases {
-		spi5 = &soft_spi;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_sd1_vmmc: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VSD_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			off-on-delay = <20000>;
-			enable-active-high;
-		};
-
-		reg_can_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_gpio_dvfs: regulator-gpio {
-			compatible = "regulator-gpio";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_dvfs>;
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-name = "gpio_dvfs";
-			regulator-type = "voltage";
-			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
-			states = <1300000 0x1 1400000 0x0>;
-		};
-	};
-
-	soft_spi: soft-spi {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		status = "okay";
-		gpio-sck = <&gpio5 11 0>;
-		gpio-mosi = <&gpio5 10 0>;
-		cs-gpios = <&gpio5 7 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			registers-default = /bits/ 8 <0x57>;
-			spi-max-frequency = <100000>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	mag3110@0e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-		position = <2>;
-	};
-
-	fxls8471@1e {
-		compatible = "fsl,fxls8471";
-		reg = <0x1e>;
-		position = <0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <0 8>;
-	};
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_1>;
-	imx6ul-evk {
-		pinctrl_hog_1: hoggrp-1 {
-			fsl,pins = <
-				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
-				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
-				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
-				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x80000000
-			>;
-		};
-
-		pinctrl_dvfs: dvfsgrp {
-			fsl,pins = <
-				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1grp_gpio {
-			fsl,pins = <
-				MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
-				MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2grp_gpio {
-			fsl,pins = <
-				MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
-				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
-			>;
-		};
-
-		pinctrl_qspi: qspigrp {
-			fsl,pins = <
-				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
-				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
-				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
-				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
-				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
-				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
-			>;
-		};
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
-				MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
-				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
-				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
-				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-			fsl,pins = <
-				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-			>;
-		};
-
-		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-			fsl,pins = <
-				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
-				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_8bit: usdhc2grp_8bit {
-			fsl,pins = <
-				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
-				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
-				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
-				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
-				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_8bit_100mhz: usdhc2grp_8bit_100mhz {
-			fsl,pins = <
-				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100b9
-				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170b9
-				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
-				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
-				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
-				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
-				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
-				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
-				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
-				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
-			>;
-		};
-
-		pinctrl_usdhc2_8bit_200mhz: usdhc2grp_8bit_200mhz {
-			fsl,pins = <
-				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100f9
-				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170f9
-				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
-				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
-				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
-				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
-				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
-				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
-				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
-				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
-			>;
-		};
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-			>;
-		};
-	};
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-	ddrsmp=<0>;
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a";
-		spi-max-frequency = <29000000>;
-		spi-nor,ddr-quad-read-dummy = <6>;
-		reg = <0>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	tx-d-cal = <0x5>;
-};
-
-&usbphy2 {
-	tx-d-cal = <0x5>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
 };
diff --git a/arch/arm/dts/imx6ul-14x14-evk.dtsi b/arch/arm/dts/imx6ul-14x14-evk.dtsi
new file mode 100644
index 0000000..d1baf0f
--- /dev/null
+++ b/arch/arm/dts/imx6ul-14x14-evk.dtsi
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/ {
+	aliases {
+		spi5 = &{/spi4};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight_display>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1grp_gpio {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ul-pinfunc.h b/arch/arm/dts/imx6ul-pinfunc.h
index 0034eeb..380d2db 100644
--- a/arch/arm/dts/imx6ul-pinfunc.h
+++ b/arch/arm/dts/imx6ul-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
+ * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
  */
 
 #ifndef __DTS_IMX6UL_PINFUNC_H
@@ -34,14 +30,14 @@
 #define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
 #define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
 #define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
-#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0610 6 0
 #define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
 #define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
-#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x05f0 2 0
 #define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
 #define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
 #define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0614 6 0
 #define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
 #define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
 #define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
@@ -63,12 +59,14 @@
 #define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
 #define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
 #define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT			0x0054 0x02e0 0x0000 6 0
 #define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
 #define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
 #define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
 #define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
 #define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
 #define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M		0x0058 0x02e4 0x0000 6 0
 #define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
 #define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
 #define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
@@ -94,22 +92,24 @@
 #define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
 #define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
 #define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0610 6 1
 #define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
 #define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
 #define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
 #define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
 #define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
 #define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT		0x0068 0x02f4 0x0000 3 0
 #define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
 #define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK		0x0068 0x02f4 0x0000 6 0
 #define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
 #define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
 #define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
 #define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
 #define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M		0x006c 0x02f8 0x0000 3 0
 #define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
 #define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
 #define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
@@ -200,7 +200,7 @@
 #define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
 #define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
 #define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
-#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0560 8 0
 #define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
 #define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
 #define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
@@ -232,7 +232,7 @@
 #define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
 #define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
 #define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
-#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x04d4 3 0
 #define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
 #define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
 #define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
@@ -242,7 +242,7 @@
 #define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
 #define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
 #define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
-#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x04d0 3 0
 #define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
 #define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
 #define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
@@ -251,7 +251,7 @@
 #define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
 #define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
 #define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
-#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x04ec 3 0
 #define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
 #define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
 #define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
@@ -259,7 +259,7 @@
 #define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
 #define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
 #define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
-#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x04f0 3 0
 #define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
 #define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
 #define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
@@ -267,7 +267,7 @@
 #define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
 #define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
 #define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
-#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x04f4 3 0
 #define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
 #define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
 #define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
@@ -275,23 +275,23 @@
 #define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
 #define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
 #define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
-#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x04f8 3 0
 #define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
 #define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
-#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0550 8 1
 #define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
 #define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
 #define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
 #define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
 #define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
 #define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
-#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x04fc 3 0
 #define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
 #define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
 #define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
 #define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
 #define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
-#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0500 3 0
 #define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
 #define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
 #define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
@@ -299,59 +299,61 @@
 #define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
 #define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
 #define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0504 3 0
 #define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
 #define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x05d0 6 0
 #define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
 #define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
 #define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
 #define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
 #define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0508 3 0
 #define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
 #define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x05c4 6 0
 #define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
 #define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
 #define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
 #define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT		0x00cc 0x0358 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x050c 3 0
 #define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
 #define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x05d4 6 0
 #define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
 #define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
 #define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
 #define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
-#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M		0x00d0 0x035c 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0510 3 0
 #define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
 #define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x05c8 6 0
 #define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
 #define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
 #define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
 #define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
 #define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0514 3 0
 #define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
 #define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x05d8 6 0
 #define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
 #define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
 #define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
 #define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
 #define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0518 3 0
 #define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
 #define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x05cc 6 0
 #define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
 #define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
 #define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
 #define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
 #define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x051c 3 0
 #define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
 #define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
 #define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
@@ -360,7 +362,7 @@
 #define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
 #define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
 #define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0520 3 0
 #define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
 #define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
 #define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
@@ -377,7 +379,7 @@
 #define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
 #define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
 #define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK	0x00e8 0x0374 0x0000 2 0
 #define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
 #define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
 #define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
@@ -400,6 +402,7 @@
 #define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
 #define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
 #define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M		0x00f0 0x037c 0x0000 8 0
 #define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
 #define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
 #define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
@@ -412,7 +415,7 @@
 #define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
 #define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
 #define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK		0x00f8 0x0384 0x0000 2 0
 #define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
 #define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
 #define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
@@ -431,7 +434,7 @@
 #define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
 #define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
 #define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0570 3 0
 #define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
 #define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
 #define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
@@ -440,7 +443,7 @@
 #define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
 #define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
 #define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
-#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0600 3 0
 #define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
 #define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
 #define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
@@ -464,7 +467,7 @@
 #define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
 #define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
 #define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
-#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0604 3 0
 #define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
 #define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
 #define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
@@ -477,13 +480,15 @@
 #define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0		0x0118 0x03a4 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
 #define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x05e0 8 1
 #define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1		0x011c 0x03a8 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
 #define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
@@ -491,6 +496,7 @@
 #define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
 #define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2		0x0120 0x03ac 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
 #define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
@@ -498,14 +504,16 @@
 #define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
 #define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3		0x0124 0x03b0 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
 #define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x05e4 8 0
 #define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4		0x0128 0x03b4 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
@@ -514,6 +522,7 @@
 #define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
 #define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5		0x012c 0x03b8 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
@@ -522,6 +531,7 @@
 #define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6		0x0130 0x03bc 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
@@ -530,6 +540,7 @@
 #define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
 #define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7		0x0134 0x03c0 0x0000 2 0
 #define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
 #define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
 #define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
@@ -537,56 +548,64 @@
 #define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
-#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8		0x0138 0x03c4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0504 3 1
 #define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0600 1 1
+#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9		0x013c 0x03c8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0508 3 1
 #define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
 #define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10		0x0140 0x03cc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x050c 3 1
 #define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11		0x0144 0x03d0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0510 3 1
 #define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
 #define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
-#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12		0x0148 0x03d4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0514 3 1
 #define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
-#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13		0x014c 0x03d8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0518 3 1
 #define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
 #define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0604 1 1
+#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14		0x0150 0x03dc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x051c 3 1
 #define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
 #define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
 #define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15		0x0154 0x03e0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0520 3 1
 #define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
@@ -594,7 +613,8 @@
 #define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
-#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK	0x0158 0x03e4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x04d4 3 1
 #define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
@@ -602,7 +622,8 @@
 #define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
 #define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL	0x015c 0x03e8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x04d0 3 1
 #define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
@@ -610,7 +631,7 @@
 #define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x04ec 3 1
 #define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
@@ -622,7 +643,7 @@
 #define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x04f0 3 1
 #define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
@@ -631,12 +652,12 @@
 #define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
 #define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
-#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x04f4 3 1
 #define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
 #define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0540 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x04f8 3 1
 #define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
@@ -644,7 +665,7 @@
 #define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
-#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x04fc 3 1
 #define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
@@ -652,7 +673,7 @@
 #define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
 #define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
 #define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
-#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0500 3 1
 #define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
 #define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
 #define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
@@ -660,42 +681,42 @@
 #define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
 #define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
 #define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
-#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x05d0 3 1
 #define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
 #define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
 #define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
 #define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
 #define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
 #define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
-#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x05c4 3 1
 #define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
 #define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
 #define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
 #define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
 #define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
 #define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x05d4 3 1
 #define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
 #define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
 #define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
 #define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
 #define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
 #define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x05c8 3 1
 #define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
 #define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
 #define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
 #define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
 #define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
 #define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x05d8 3 1
 #define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
 #define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
 #define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
 #define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
 #define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
 #define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x05cc 3 1
 #define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
 #define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
 #define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
@@ -726,7 +747,7 @@
 #define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
 #define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
 #define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0570 3 1
 #define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
 #define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
 #define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
@@ -748,7 +769,7 @@
 #define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
 #define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
 #define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
-#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0560 3 1
 #define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
 #define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
 #define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
@@ -783,7 +804,7 @@
 #define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
 #define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
 #define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
-#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0614 6 1
 #define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
 #define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
 #define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
@@ -791,11 +812,11 @@
 #define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
 #define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
 #define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
-#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0610 6 2
 #define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
 #define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
 #define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
-#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x05f0 2 1
 #define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
 #define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
 #define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
@@ -878,10 +899,10 @@
 #define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
 #define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
 #define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0550 3 0
 #define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
 #define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x05e0 6 0
 #define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
 #define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
 #define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
@@ -913,7 +934,7 @@
 #define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
 #define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
 #define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0540 3 1
 #define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
 #define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
 #define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
@@ -924,7 +945,7 @@
 #define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
 #define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
 #define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x05e4 6 1
 #define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
 #define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
 #define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index 71b42d4..5644b0f 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -1,19 +1,23 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/clock/imx6ul-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6ul-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
@@ -59,14 +63,17 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			operating-points = <
 				/* kHz	uV */
+				696000	1275000
 				528000	1175000
 				396000	1025000
 				198000	950000
 			>;
 			fsl,soc-operating-points = <
 				/* KHz	uV */
+				696000	1275000
 				528000	1175000
 				396000	1175000
 				198000	1175000
@@ -77,30 +84,39 @@
 				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
 				 <&clks IMX6UL_CLK_STEP>,
 				 <&clks IMX6UL_CLK_PLL1_SW>,
-				 <&clks IMX6UL_CLK_PLL1_SYS>,
-				 <&clks IMX6UL_PLL1_BYPASS>,
-				 <&clks IMX6UL_CLK_PLL1>,
-				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
-				 <&clks IMX6UL_CLK_OSC>;
+				 <&clks IMX6UL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
 				      "secondary_sel", "step", "pll1_sw",
-				      "pll1_sys", "pll1_bypass", "pll1",
-				      "pll1_bypass_src", "osc";
+				      "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a7-gic";
+	intc: interrupt-controller@a01000 {
+		compatible = "arm,gic-400", "arm,cortex-a7-gic";
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		interrupt-parent = <&intc>;
 		reg = <0x00a01000 0x1000>,
-		      <0x00a02000 0x1000>,
+		      <0x00a02000 0x2000>,
 		      <0x00a04000 0x2000>,
 		      <0x00a06000 0x2000>;
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
 	ckil: clock-cli {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -129,6 +145,22 @@
 		clock-output-names = "ipp_di1";
 	};
 
+	tempmon: tempmon {
+		compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
+		clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -136,18 +168,12 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		ocram: sram@00900000 {
+		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
 		};
 
-		dma_apbh: dma-apbh@01804000 {
+		dma_apbh: dma-apbh@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -160,7 +186,7 @@
 			clocks = <&clks IMX6UL_CLK_APBHDMA>;
 		};
 
-		gpmi: gpmi-nand@01806000         {
+		gpmi: gpmi-nand@1806000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -180,22 +206,21 @@
 			status = "disabled";
 		};
 
-		aips1: aips-bus@02000000 {
+		aips1: aips-bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02000000 0x100000>;
 			ranges;
 
-			spba-bus@02000000 {
+			spba-bus@2000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x02000000 0x40000>;
 				ranges;
-				u-boot,dm-spl;
 
-				ecspi1: ecspi@02008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -207,7 +232,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@0200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -219,7 +244,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@02010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -231,7 +256,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@02014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -243,7 +268,7 @@
 					status = "disabled";
 				};
 
-				uart7: serial@02018000 {
+				uart7: serial@2018000 {
 					compatible = "fsl,imx6ul-uart",
 						     "fsl,imx6q-uart";
 					reg = <0x02018000 0x4000>;
@@ -254,7 +279,7 @@
 					status = "disabled";
 				};
 
-				uart1: serial@02020000 {
+				uart1: serial@2020000 {
 					compatible = "fsl,imx6ul-uart",
 						     "fsl,imx6q-uart";
 					reg = <0x02020000 0x4000>;
@@ -265,7 +290,7 @@
 					status = "disabled";
 				};
 
-				uart8: serial@02024000 {
+				uart8: serial@2024000 {
 					compatible = "fsl,imx6ul-uart",
 						     "fsl,imx6q-uart";
 					reg = <0x02024000 0x4000>;
@@ -276,7 +301,7 @@
 					status = "disabled";
 				};
 
-				sai1: sai@02028000 {
+				sai1: sai@2028000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x02028000 0x4000>;
@@ -291,7 +316,7 @@
 					status = "disabled";
 				};
 
-				sai2: sai@0202c000 {
+				sai2: sai@202c000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x0202c000 0x4000>;
@@ -306,7 +331,7 @@
 					status = "disabled";
 				};
 
-				sai3: sai@02030000 {
+				sai3: sai@2030000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x02030000 0x4000>;
@@ -322,7 +347,7 @@
 				};
 			};
 
-			tsc: tsc@02040000 {
+			tsc: tsc@2040000 {
 				compatible = "fsl,imx6ul-tsc";
 				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -333,10 +358,10 @@
 				status = "disabled";
 			};
 
-			pwm1: pwm@02080000 {
+			pwm1: pwm@2080000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM1>,
 					 <&clks IMX6UL_CLK_PWM1>;
 				clock-names = "ipg", "per";
@@ -344,10 +369,10 @@
 				status = "disabled";
 			};
 
-			pwm2: pwm@02084000 {
+			pwm2: pwm@2084000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM2>,
 					 <&clks IMX6UL_CLK_PWM2>;
 				clock-names = "ipg", "per";
@@ -355,10 +380,10 @@
 				status = "disabled";
 			};
 
-			pwm3: pwm@02088000 {
+			pwm3: pwm@2088000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM3>,
 					 <&clks IMX6UL_CLK_PWM3>;
 				clock-names = "ipg", "per";
@@ -366,10 +391,10 @@
 				status = "disabled";
 			};
 
-			pwm4: pwm@0208c000 {
+			pwm4: pwm@208c000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM4>,
 					 <&clks IMX6UL_CLK_PWM4>;
 				clock-names = "ipg", "per";
@@ -377,27 +402,29 @@
 				status = "disabled";
 			};
 
-			can1: flexcan@02090000 {
+			can1: flexcan@2090000 {
 				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
 					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
 				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
 				status = "disabled";
 			};
 
-			can2: flexcan@02094000 {
+			can2: flexcan@2094000 {
 				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
 					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
 				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
 				status = "disabled";
 			};
 
-			gpt1: gpt@02098000 {
+			gpt1: gpt@2098000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,11 +433,12 @@
 				clock-names = "ipg", "per";
 			};
 
-			gpio1: gpio@0209c000 {
+			gpio1: gpio@209c000 {
 				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -419,11 +447,12 @@
 					      <&iomuxc 16 33 16>;
 			};
 
-			gpio2: gpio@020a0000 {
+			gpio2: gpio@20a0000 {
 				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -431,11 +460,12 @@
 				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 			};
 
-			gpio3: gpio@020a4000 {
+			gpio3: gpio@20a4000 {
 				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -443,11 +473,12 @@
 				gpio-ranges = <&iomuxc 0 65 29>;
 			};
 
-			gpio4: gpio@020a8000 {
+			gpio4: gpio@20a8000 {
 				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -455,11 +486,12 @@
 				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 			};
 
-			gpio5: gpio@020ac000 {
+			gpio5: gpio@20ac000 {
 				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -467,9 +499,10 @@
 				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 			};
 
-			fec2: ethernet@020b4000 {
+			fec2: ethernet@20b4000 {
 				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x020b4000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ENET>,
@@ -484,7 +517,7 @@
 				status = "disabled";
 			};
 
-			kpp: kpp@020b8000 {
+			kpp: kpp@20b8000 {
 				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -492,14 +525,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog@020bc000 {
+			wdog1: wdog@20bc000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_WDOG1>;
 			};
 
-			wdog2: wdog@020c0000 {
+			wdog2: wdog@20c0000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -507,7 +540,7 @@
 				status = "disabled";
 			};
 
-			clks: ccm@020c4000 {
+			clks: ccm@20c4000 {
 				compatible = "fsl,imx6ul-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -517,7 +550,7 @@
 				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 			};
 
-			anatop: anatop@020c8000 {
+			anatop: anatop@20c8000 {
 				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
 					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
@@ -574,7 +607,7 @@
 				};
 			};
 
-			usbphy1: usbphy@020c9000 {
+			usbphy1: usbphy@20c9000 {
 				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -583,7 +616,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			usbphy2: usbphy@020ca000 {
+			usbphy2: usbphy@20ca000 {
 				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -592,7 +625,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs: snvs@020cc000 {
+			snvs: snvs@20cc000 {
 				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x020cc000 0x4000>;
 
@@ -608,6 +641,7 @@
 					compatible = "syscon-poweroff";
 					regmap = <&snvs>;
 					offset = <0x38>;
+					value = <0x60>;
 					mask = <0x60>;
 					status = "disabled";
 				};
@@ -619,19 +653,23 @@
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6ul-snvs-lpgpr";
+				};
 			};
 
-			epit1: epit@020d0000 {
+			epit1: epit@20d0000 {
 				reg = <0x020d0000 0x4000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epit2: epit@020d4000 {
+			epit2: epit@20d4000 {
 				reg = <0x020d4000 0x4000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@020d8000 {
+			src: src@20d8000 {
 				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -639,7 +677,7 @@
 				#reset-cells = <1>;
 			};
 
-			gpc: gpc@020dc000 {
+			gpc: gpc@20dc000 {
 				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
@@ -648,18 +686,18 @@
 				interrupt-parent = <&intc>;
 			};
 
-			iomuxc: iomuxc@020e0000 {
+			iomuxc: iomuxc@20e0000 {
 				compatible = "fsl,imx6ul-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@020e4000 {
+			gpr: iomuxc-gpr@20e4000 {
 				compatible = "fsl,imx6ul-iomuxc-gpr",
 					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x020e4000 0x4000>;
 			};
 
-			gpt2: gpt@020e8000 {
+			gpt2: gpt@20e8000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x020e8000 0x4000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,19 +706,19 @@
 				clock-names = "ipg", "per";
 			};
 
-			sdma: sdma@020ec000 {
+			sdma: sdma@20ec000 {
 				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_SDMA>,
+				clocks = <&clks IMX6UL_CLK_IPG>,
 					 <&clks IMX6UL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
-			pwm5: pwm@020f0000 {
+			pwm5: pwm@20f0000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f0000 0x4000>;
 				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -691,7 +729,7 @@
 				status = "disabled";
 			};
 
-			pwm6: pwm@020f4000 {
+			pwm6: pwm@20f4000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f4000 0x4000>;
 				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -702,7 +740,7 @@
 				status = "disabled";
 			};
 
-			pwm7: pwm@020f8000 {
+			pwm7: pwm@20f8000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f8000 0x4000>;
 				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
@@ -713,7 +751,7 @@
 				status = "disabled";
 			};
 
-			pwm8: pwm@020fc000 {
+			pwm8: pwm@20fc000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
@@ -725,14 +763,44 @@
 			};
 		};
 
-		aips2: aips-bus@02100000 {
+		aips2: aips-bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
+			crypto: caam@2140000 {
+				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2140000 0x3c000>;
+				ranges = <0 0x2140000 0x3c000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+					 <&clks IMX6UL_CLK_CAAM_MEM>;
+				clock-names = "ipg", "aclk", "mem";
+
-			usbotg1: usb@02184000 {
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr2@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
 				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -746,7 +814,7 @@
 				status = "disabled";
 			};
 
-			usbotg2: usb@02184200 {
+			usbotg2: usb@2184200 {
 				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -759,15 +827,16 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc@2184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 			};
 
-			fec1: ethernet@02188000 {
+			fec1: ethernet@2188000 {
 				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ENET>,
@@ -782,7 +851,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@02190000 {
+			usdhc1: usdhc@2190000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -794,7 +863,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@02194000 {
+			usdhc2: usdhc@2194000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -806,7 +875,7 @@
 				status = "disabled";
 			};
 
-			adc1: adc@02198000 {
+			adc1: adc@2198000 {
 				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -818,7 +887,7 @@
 				status = "disabled";
 			};
 
-			i2c1: i2c@021a0000 {
+			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -828,7 +897,7 @@
 				status = "disabled";
 			};
 
-			i2c2: i2c@021a4000 {
+			i2c2: i2c@21a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -838,7 +907,7 @@
 				status = "disabled";
 			};
 
-			i2c3: i2c@021a8000 {
+			i2c3: i2c@21a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -848,12 +917,44 @@
 				status = "disabled";
 			};
 
-			mmdc: mmdc@021b0000 {
+			memory-controller@21b0000 {
 				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EIM>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
-			lcdif: lcdif@021c8000 {
+			ocotp: ocotp-ctrl@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			lcdif: lcdif@21c8000 {
 				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -864,7 +965,7 @@
 				status = "disabled";
 			};
 
-			qspi: qspi@021e0000 {
+			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
@@ -877,7 +978,7 @@
 				status = "disabled";
 			};
 
-			wdog3: wdog@021e4000 {
+			wdog3: wdog@21e4000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x021e4000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -885,7 +986,7 @@
 				status = "disabled";
 			};
 
-			uart2: serial@021e8000 {
+			uart2: serial@21e8000 {
 				compatible = "fsl,imx6ul-uart",
 					     "fsl,imx6q-uart";
 				reg = <0x021e8000 0x4000>;
@@ -896,7 +997,7 @@
 				status = "disabled";
 			};
 
-			uart3: serial@021ec000 {
+			uart3: serial@21ec000 {
 				compatible = "fsl,imx6ul-uart",
 					     "fsl,imx6q-uart";
 				reg = <0x021ec000 0x4000>;
@@ -907,7 +1008,7 @@
 				status = "disabled";
 			};
 
-			uart4: serial@021f0000 {
+			uart4: serial@21f0000 {
 				compatible = "fsl,imx6ul-uart",
 					     "fsl,imx6q-uart";
 				reg = <0x021f0000 0x4000>;
@@ -918,7 +1019,7 @@
 				status = "disabled";
 			};
 
-			uart5: serial@021f4000 {
+			uart5: serial@21f4000 {
 				compatible = "fsl,imx6ul-uart",
 					     "fsl,imx6q-uart";
 				reg = <0x021f4000 0x4000>;
@@ -929,7 +1030,7 @@
 				status = "disabled";
 			};
 
-			i2c4: i2c@021f8000 {
+			i2c4: i2c@21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
@@ -939,7 +1040,7 @@
 				status = "disabled";
 			};
 
-			uart6: serial@021fc000 {
+			uart6: serial@21fc000 {
 				compatible = "fsl,imx6ul-uart",
 					     "fsl,imx6q-uart";
 				reg = <0x021fc000 0x4000>;