| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018, Linaro Limited |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-qcs404.h> |
| #include <dt-bindings/clock/qcom,turingcc-qcs404.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x100>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| next-level-cache = <&L2_0>; |
| #cooling-cells = <2>; |
| clocks = <&apcs_glb>; |
| operating-points-v2 = <&cpu_opp_table>; |
| power-domains = <&cpr>; |
| power-domain-names = "cpr"; |
| }; |
| |
| CPU1: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x101>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| next-level-cache = <&L2_0>; |
| #cooling-cells = <2>; |
| clocks = <&apcs_glb>; |
| operating-points-v2 = <&cpu_opp_table>; |
| power-domains = <&cpr>; |
| power-domain-names = "cpr"; |
| }; |
| |
| CPU2: cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x102>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| next-level-cache = <&L2_0>; |
| #cooling-cells = <2>; |
| clocks = <&apcs_glb>; |
| operating-points-v2 = <&cpu_opp_table>; |
| power-domains = <&cpr>; |
| power-domain-names = "cpr"; |
| }; |
| |
| CPU3: cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x103>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| next-level-cache = <&L2_0>; |
| #cooling-cells = <2>; |
| clocks = <&apcs_glb>; |
| operating-points-v2 = <&cpu_opp_table>; |
| power-domains = <&cpr>; |
| power-domain-names = "cpr"; |
| }; |
| |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "standalone-power-collapse"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <125>; |
| exit-latency-us = <180>; |
| min-residency-us = <595>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| cpu_opp_table: opp-table-cpu { |
| compatible = "operating-points-v2-kryo-cpu"; |
| opp-shared; |
| |
| opp-1094400000 { |
| opp-hz = /bits/ 64 <1094400000>; |
| required-opps = <&cpr_opp1>; |
| }; |
| opp-1248000000 { |
| opp-hz = /bits/ 64 <1248000000>; |
| required-opps = <&cpr_opp2>; |
| }; |
| opp-1401600000 { |
| opp-hz = /bits/ 64 <1401600000>; |
| required-opps = <&cpr_opp3>; |
| }; |
| }; |
| |
| cpr_opp_table: opp-table-cpr { |
| compatible = "operating-points-v2-qcom-level"; |
| |
| cpr_opp1: opp1 { |
| opp-level = <1>; |
| qcom,opp-fuse-level = <1>; |
| }; |
| cpr_opp2: opp2 { |
| opp-level = <2>; |
| qcom,opp-fuse-level = <2>; |
| }; |
| cpr_opp3: opp3 { |
| opp-level = <3>; |
| qcom,opp-fuse-level = <3>; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-qcs404", "qcom,scm"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0 0x80000000 0 0>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| rpm: remoteproc { |
| compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc"; |
| |
| glink-edge { |
| compatible = "qcom,glink-rpm"; |
| |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| mboxes = <&apcs_glb 0>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-qcs404"; |
| qcom,glink-channels = "rpm_requests"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; |
| #clock-cells = <1>; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| }; |
| |
| rpmpd: power-controller { |
| compatible = "qcom,qcs404-rpmpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmpd_opp_table>; |
| |
| rpmpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmpd_opp_ret: opp1 { |
| opp-level = <16>; |
| }; |
| |
| rpmpd_opp_ret_plus: opp2 { |
| opp-level = <32>; |
| }; |
| |
| rpmpd_opp_min_svs: opp3 { |
| opp-level = <48>; |
| }; |
| |
| rpmpd_opp_low_svs: opp4 { |
| opp-level = <64>; |
| }; |
| |
| rpmpd_opp_svs: opp5 { |
| opp-level = <128>; |
| }; |
| |
| rpmpd_opp_svs_plus: opp6 { |
| opp-level = <192>; |
| }; |
| |
| rpmpd_opp_nom: opp7 { |
| opp-level = <256>; |
| }; |
| |
| rpmpd_opp_nom_plus: opp8 { |
| opp-level = <320>; |
| }; |
| |
| rpmpd_opp_turbo: opp9 { |
| opp-level = <384>; |
| }; |
| |
| rpmpd_opp_turbo_no_cpr: opp10 { |
| opp-level = <416>; |
| }; |
| |
| rpmpd_opp_turbo_plus: opp11 { |
| opp-level = <512>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| tz_apps_mem: memory@85900000 { |
| reg = <0 0x85900000 0 0x500000>; |
| no-map; |
| }; |
| |
| xbl_mem: memory@85e00000 { |
| reg = <0 0x85e00000 0 0x100000>; |
| no-map; |
| }; |
| |
| smem_region: memory@85f00000 { |
| reg = <0 0x85f00000 0 0x200000>; |
| no-map; |
| }; |
| |
| tz_mem: memory@86100000 { |
| reg = <0 0x86100000 0 0x300000>; |
| no-map; |
| }; |
| |
| wlan_fw_mem: memory@86400000 { |
| reg = <0 0x86400000 0 0x1100000>; |
| no-map; |
| }; |
| |
| adsp_fw_mem: memory@87500000 { |
| reg = <0 0x87500000 0 0x1a00000>; |
| no-map; |
| }; |
| |
| cdsp_fw_mem: memory@88f00000 { |
| reg = <0 0x88f00000 0 0x600000>; |
| no-map; |
| }; |
| |
| wlan_msa_mem: memory@89500000 { |
| reg = <0 0x89500000 0 0x100000>; |
| no-map; |
| }; |
| |
| uefi_mem: memory@9f800000 { |
| reg = <0 0x9f800000 0 0x800000>; |
| no-map; |
| }; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| |
| memory-region = <&smem_region>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc: soc@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| turingcc: clock-controller@800000 { |
| compatible = "qcom,qcs404-turingcc"; |
| reg = <0x00800000 0x30000>; |
| clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| rpm_msg_ram: sram@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x00060000 0x6000>; |
| }; |
| |
| usb3_phy: phy@78000 { |
| compatible = "qcom,usb-ss-28nm-phy"; |
| reg = <0x00078000 0x400>; |
| #phy-cells = <0>; |
| clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| <&gcc GCC_USB3_PHY_PIPE_CLK>; |
| clock-names = "ref", "ahb", "pipe"; |
| resets = <&gcc GCC_USB3_PHY_BCR>, |
| <&gcc GCC_USB3PHY_PHY_BCR>; |
| reset-names = "com", "phy"; |
| status = "disabled"; |
| }; |
| |
| usb2_phy_prim: phy@7a000 { |
| compatible = "qcom,usb-hs-28nm-femtophy"; |
| reg = <0x0007a000 0x200>; |
| #phy-cells = <0>; |
| clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| clock-names = "ref", "ahb", "sleep"; |
| resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, |
| <&gcc GCC_USB2A_PHY_BCR>; |
| reset-names = "phy", "por"; |
| status = "disabled"; |
| }; |
| |
| usb2_phy_sec: phy@7c000 { |
| compatible = "qcom,usb-hs-28nm-femtophy"; |
| reg = <0x0007c000 0x200>; |
| #phy-cells = <0>; |
| clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, |
| <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, |
| <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| clock-names = "ref", "ahb", "sleep"; |
| resets = <&gcc GCC_QUSB2_PHY_BCR>, |
| <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; |
| reset-names = "phy", "por"; |
| status = "disabled"; |
| }; |
| |
| qfprom: qfprom@a4000 { |
| compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; |
| reg = <0x000a4000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cpr_efuse_speedbin: speedbin@13c { |
| reg = <0x13c 0x4>; |
| bits = <2 3>; |
| }; |
| |
| tsens_s0_p1: s0-p1@1f8 { |
| reg = <0x1f8 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s0_p2: s0-p2@1f8 { |
| reg = <0x1f8 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s1_p1: s1-p1@1f9 { |
| reg = <0x1f9 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s1_p2: s1-p2@1fa { |
| reg = <0x1fa 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s2_p1: s2-p1@1fb { |
| reg = <0x1fb 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s2_p2: s2-p2@1fb { |
| reg = <0x1fb 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s3_p1: s3-p1@1fc { |
| reg = <0x1fc 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s3_p2: s3-p2@1fd { |
| reg = <0x1fd 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s4_p1: s4-p1@1fe { |
| reg = <0x1fe 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s4_p2: s4-p2@1fe { |
| reg = <0x1fe 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s5_p1: s5-p1@200 { |
| reg = <0x200 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s5_p2: s5-p2@200 { |
| reg = <0x200 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s6_p1: s6-p1@201 { |
| reg = <0x201 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s6_p2: s6-p2@202 { |
| reg = <0x202 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s7_p1: s7-p1@203 { |
| reg = <0x203 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s7_p2: s7-p2@203 { |
| reg = <0x203 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s8_p1: s8-p1@204 { |
| reg = <0x204 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s8_p2: s8-p2@205 { |
| reg = <0x205 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s9_p1: s9-p1@206 { |
| reg = <0x206 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s9_p2: s9-p2@206 { |
| reg = <0x206 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_mode: mode@208 { |
| reg = <0x208 1>; |
| bits = <0 3>; |
| }; |
| |
| tsens_base1: base1@208 { |
| reg = <0x208 2>; |
| bits = <3 8>; |
| }; |
| |
| tsens_base2: base2@208 { |
| reg = <0x209 2>; |
| bits = <3 8>; |
| }; |
| |
| cpr_efuse_quot_offset1: qoffset1@231 { |
| reg = <0x231 0x4>; |
| bits = <4 7>; |
| }; |
| cpr_efuse_quot_offset2: qoffset2@232 { |
| reg = <0x232 0x4>; |
| bits = <3 7>; |
| }; |
| cpr_efuse_quot_offset3: qoffset3@233 { |
| reg = <0x233 0x4>; |
| bits = <2 7>; |
| }; |
| cpr_efuse_init_voltage1: ivoltage1@229 { |
| reg = <0x229 0x4>; |
| bits = <4 6>; |
| }; |
| cpr_efuse_init_voltage2: ivoltage2@22a { |
| reg = <0x22a 0x4>; |
| bits = <2 6>; |
| }; |
| cpr_efuse_init_voltage3: ivoltage3@22b { |
| reg = <0x22b 0x4>; |
| bits = <0 6>; |
| }; |
| cpr_efuse_quot1: quot1@22b { |
| reg = <0x22b 0x4>; |
| bits = <6 12>; |
| }; |
| cpr_efuse_quot2: quot2@22d { |
| reg = <0x22d 0x4>; |
| bits = <2 12>; |
| }; |
| cpr_efuse_quot3: quot3@230 { |
| reg = <0x230 0x4>; |
| bits = <0 12>; |
| }; |
| cpr_efuse_ring1: ring1@228 { |
| reg = <0x228 0x4>; |
| bits = <0 3>; |
| }; |
| cpr_efuse_ring2: ring2@228 { |
| reg = <0x228 0x4>; |
| bits = <4 3>; |
| }; |
| cpr_efuse_ring3: ring3@229 { |
| reg = <0x229 0x4>; |
| bits = <0 3>; |
| }; |
| cpr_efuse_revision: revision@218 { |
| reg = <0x218 0x4>; |
| bits = <3 3>; |
| }; |
| }; |
| |
| rng: rng@e3000 { |
| compatible = "qcom,prng-ee"; |
| reg = <0x000e3000 0x1000>; |
| clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| clock-names = "core"; |
| }; |
| |
| bimc: interconnect@400000 { |
| reg = <0x00400000 0x80000>; |
| compatible = "qcom,qcs404-bimc"; |
| #interconnect-cells = <1>; |
| }; |
| |
| tsens: thermal-sensor@4a9000 { |
| compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; |
| reg = <0x004a9000 0x1000>, /* TM */ |
| <0x004a8000 0x1000>; /* SROT */ |
| nvmem-cells = <&tsens_mode>, |
| <&tsens_base1>, <&tsens_base2>, |
| <&tsens_s0_p1>, <&tsens_s0_p2>, |
| <&tsens_s1_p1>, <&tsens_s1_p2>, |
| <&tsens_s2_p1>, <&tsens_s2_p2>, |
| <&tsens_s3_p1>, <&tsens_s3_p2>, |
| <&tsens_s4_p1>, <&tsens_s4_p2>, |
| <&tsens_s5_p1>, <&tsens_s5_p2>, |
| <&tsens_s6_p1>, <&tsens_s6_p2>, |
| <&tsens_s7_p1>, <&tsens_s7_p2>, |
| <&tsens_s8_p1>, <&tsens_s8_p2>, |
| <&tsens_s9_p1>, <&tsens_s9_p2>; |
| nvmem-cell-names = "mode", |
| "base1", "base2", |
| "s0_p1", "s0_p2", |
| "s1_p1", "s1_p2", |
| "s2_p1", "s2_p2", |
| "s3_p1", "s3_p2", |
| "s4_p1", "s4_p2", |
| "s5_p1", "s5_p2", |
| "s6_p1", "s6_p2", |
| "s7_p1", "s7_p2", |
| "s8_p1", "s8_p2", |
| "s9_p1", "s9_p2"; |
| #qcom,sensors = <10>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| pcnoc: interconnect@500000 { |
| reg = <0x00500000 0x15080>; |
| compatible = "qcom,qcs404-pcnoc"; |
| #interconnect-cells = <1>; |
| }; |
| |
| snoc: interconnect@580000 { |
| reg = <0x00580000 0x23080>; |
| compatible = "qcom,qcs404-snoc"; |
| #interconnect-cells = <1>; |
| }; |
| |
| remoteproc_cdsp: remoteproc@b00000 { |
| compatible = "qcom,qcs404-cdsp-pas"; |
| reg = <0x00b00000 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, |
| <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| |
| /* |
| * If the node was using the PIL binding, then include properties: |
| * clocks = <&xo_board>, |
| * <&gcc GCC_CDSP_CFG_AHB_CLK>, |
| * <&gcc GCC_CDSP_TBU_CLK>, |
| * <&gcc GCC_BIMC_CDSP_CLK>, |
| * <&turingcc TURING_WRAPPER_AON_CLK>, |
| * <&turingcc TURING_Q6SS_AHBS_AON_CLK>, |
| * <&turingcc TURING_Q6SS_AHBM_AON_CLK>, |
| * <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; |
| * clock-names = "xo", |
| * "sway", |
| * "tbu", |
| * "bimc", |
| * "ahb_aon", |
| * "q6ss_slave", |
| * "q6ss_master", |
| * "q6_axim"; |
| * resets = <&gcc GCC_CDSP_RESTART>; |
| * reset-names = "restart"; |
| * qcom,halt-regs = <&tcsr 0x19004>; |
| */ |
| |
| memory-region = <&cdsp_fw_mem>; |
| |
| qcom,smem-states = <&cdsp_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,remote-pid = <5>; |
| mboxes = <&apcs_glb 12>; |
| |
| label = "cdsp"; |
| }; |
| }; |
| |
| usb3: usb@7678800 { |
| compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; |
| reg = <0x07678800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&gcc GCC_USB30_MASTER_CLK>, |
| <&gcc GCC_SYS_NOC_USB3_CLK>, |
| <&gcc GCC_USB30_SLEEP_CLK>, |
| <&gcc GCC_USB30_MOCK_UTMI_CLK>; |
| clock-names = "core", "iface", "sleep", "mock_utmi"; |
| assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "qusb2_phy"; |
| |
| status = "disabled"; |
| |
| usb3_dwc3: usb@7580000 { |
| compatible = "snps,dwc3"; |
| reg = <0x07580000 0xcd00>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb2_phy_prim>, <&usb3_phy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| snps,has-lpm-erratum; |
| snps,hird-threshold = /bits/ 8 <0x10>; |
| snps,usb3_lpm_capable; |
| dr_mode = "otg"; |
| }; |
| }; |
| |
| usb2: usb@79b8800 { |
| compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; |
| reg = <0x079b8800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>, |
| <&gcc GCC_PCNOC_USB2_CLK>, |
| <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>, |
| <&gcc GCC_USB20_MOCK_UTMI_CLK>; |
| clock-names = "core", "iface", "sleep", "mock_utmi"; |
| assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| assigned-clock-rates = <19200000>, <133333333>; |
| |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "qusb2_phy"; |
| |
| status = "disabled"; |
| |
| usb@78c0000 { |
| compatible = "snps,dwc3"; |
| reg = <0x078c0000 0xcc00>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb2_phy_sec>; |
| phy-names = "usb2-phy"; |
| snps,has-lpm-erratum; |
| snps,hird-threshold = /bits/ 8 <0x10>; |
| snps,usb3_lpm_capable; |
| dr_mode = "peripheral"; |
| }; |
| }; |
| |
| tlmm: pinctrl@1000000 { |
| compatible = "qcom,qcs404-pinctrl"; |
| reg = <0x01000000 0x200000>, |
| <0x01300000 0x200000>, |
| <0x07b00000 0x200000>; |
| reg-names = "south", "north", "east"; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-ranges = <&tlmm 0 0 120>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| blsp1_i2c0_default: blsp1-i2c0-default-state { |
| pins = "gpio32", "gpio33"; |
| function = "blsp_i2c0"; |
| }; |
| |
| blsp1_i2c1_default: blsp1-i2c1-default-state { |
| pins = "gpio24", "gpio25"; |
| function = "blsp_i2c1"; |
| }; |
| |
| blsp1_i2c2_default: blsp1-i2c2-default-state { |
| sda-pins { |
| pins = "gpio19"; |
| function = "blsp_i2c_sda_a2"; |
| }; |
| |
| scl-pins { |
| pins = "gpio20"; |
| function = "blsp_i2c_scl_a2"; |
| }; |
| }; |
| |
| blsp1_i2c3_default: blsp1-i2c3-default-state { |
| pins = "gpio84", "gpio85"; |
| function = "blsp_i2c3"; |
| }; |
| |
| blsp1_i2c4_default: blsp1-i2c4-default-state { |
| pins = "gpio117", "gpio118"; |
| function = "blsp_i2c4"; |
| }; |
| |
| blsp1_uart0_default: blsp1-uart0-default-state { |
| pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| function = "blsp_uart0"; |
| }; |
| |
| blsp1_uart1_default: blsp1-uart1-default-state { |
| pins = "gpio22", "gpio23"; |
| function = "blsp_uart1"; |
| }; |
| |
| blsp1_uart2_default: blsp1-uart2-default-state { |
| rx-pins { |
| pins = "gpio18"; |
| function = "blsp_uart_rx_a2"; |
| }; |
| |
| tx-pins { |
| pins = "gpio17"; |
| function = "blsp_uart_tx_a2"; |
| }; |
| }; |
| |
| blsp1_uart3_default: blsp1-uart3-default-state { |
| cts-pins { |
| pins = "gpio84"; |
| function = "blsp_uart3"; |
| }; |
| |
| rts-tx-pins { |
| pins = "gpio85", "gpio82"; |
| function = "blsp_uart3"; |
| }; |
| |
| rx-pins { |
| pins = "gpio83"; |
| function = "blsp_uart3"; |
| }; |
| }; |
| |
| blsp2_i2c0_default: blsp2-i2c0-default-state { |
| pins = "gpio28", "gpio29"; |
| function = "blsp_i2c5"; |
| }; |
| |
| blsp1_spi0_default: blsp1-spi0-default-state { |
| pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| function = "blsp_spi0"; |
| }; |
| |
| blsp1_spi1_default: blsp1-spi1-default-state { |
| mosi-pins { |
| pins = "gpio22"; |
| function = "blsp_spi_mosi_a1"; |
| }; |
| |
| miso-pins { |
| pins = "gpio23"; |
| function = "blsp_spi_miso_a1"; |
| }; |
| |
| cs-n-pins { |
| pins = "gpio24"; |
| function = "blsp_spi_cs_n_a1"; |
| }; |
| |
| clk-pins { |
| pins = "gpio25"; |
| function = "blsp_spi_clk_a1"; |
| }; |
| }; |
| |
| blsp1_spi2_default: blsp1-spi2-default-state { |
| pins = "gpio17", "gpio18", "gpio19", "gpio20"; |
| function = "blsp_spi2"; |
| }; |
| |
| blsp1_spi3_default: blsp1-spi3-default-state { |
| pins = "gpio82", "gpio83", "gpio84", "gpio85"; |
| function = "blsp_spi3"; |
| }; |
| |
| blsp1_spi4_default: blsp1-spi4-default-state { |
| pins = "gpio37", "gpio38", "gpio117", "gpio118"; |
| function = "blsp_spi4"; |
| }; |
| |
| blsp2_spi0_default: blsp2-spi0-default-state { |
| pins = "gpio26", "gpio27", "gpio28", "gpio29"; |
| function = "blsp_spi5"; |
| }; |
| |
| blsp2_uart0_default: blsp2-uart0-default-state { |
| pins = "gpio26", "gpio27", "gpio28", "gpio29"; |
| function = "blsp_uart5"; |
| }; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,gcc-qcs404"; |
| reg = <0x01800000 0x80000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| |
| clocks = <&xo_board>, |
| <&sleep_clk>, |
| <&pcie_phy>, |
| <0>, |
| <0>, |
| <0>; |
| |
| assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; |
| assigned-clock-rates = <19200000>; |
| }; |
| |
| tcsr_mutex: hwlock@1905000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x01905000 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: syscon@1937000 { |
| compatible = "qcom,qcs404-tcsr", "syscon"; |
| reg = <0x01937000 0x25000>; |
| }; |
| |
| sram@290000 { |
| compatible = "qcom,rpm-stats"; |
| reg = <0x00290000 0x10000>; |
| }; |
| |
| spmi_bus: spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0200f000 0x001000>, |
| <0x02400000 0x800000>, |
| <0x02c00000 0x800000>, |
| <0x03800000 0x200000>, |
| <0x0200a000 0x002100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| remoteproc_wcss: remoteproc@7400000 { |
| compatible = "qcom,qcs404-wcss-pas"; |
| reg = <0x07400000 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, |
| <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| |
| memory-region = <&wlan_fw_mem>; |
| |
| qcom,smem-states = <&wcss_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,remote-pid = <1>; |
| mboxes = <&apcs_glb 16>; |
| |
| label = "wcss"; |
| }; |
| }; |
| |
| pcie_phy: phy@7786000 { |
| compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; |
| reg = <0x07786000 0xb8>; |
| |
| clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; |
| resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, |
| <&gcc GCC_PCIE_0_PIPE_ARES>; |
| reset-names = "phy", "pipe"; |
| |
| clock-output-names = "pcie_0_pipe_clk"; |
| #clock-cells = <0>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| sdcc1: mmc@7804000 { |
| compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x07804000 0x1000>, <0x7805000 0x1000>; |
| reg-names = "hc", "cqhci"; |
| |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "core", "xo"; |
| |
| status = "disabled"; |
| }; |
| |
| blsp1_dma: dma-controller@7884000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07884000 0x25000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| status = "okay"; |
| }; |
| |
| blsp1_uart0: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078af000 0x200>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart0_default>; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart1: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b0000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart1_default>; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart2: serial@78b1000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b1000 0x200>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart2_default>; |
| status = "okay"; |
| }; |
| |
| ethernet: ethernet@7a80000 { |
| compatible = "qcom,qcs404-ethqos"; |
| reg = <0x07a80000 0x10000>, |
| <0x07a96000 0x100>; |
| reg-names = "stmmaceth", "rgmii"; |
| clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; |
| clocks = <&gcc GCC_ETH_AXI_CLK>, |
| <&gcc GCC_ETH_SLAVE_AHB_CLK>, |
| <&gcc GCC_ETH_PTP_CLK>, |
| <&gcc GCC_ETH_RGMII_CLK>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "eth_lpi"; |
| |
| snps,tso; |
| rx-fifo-depth = <4096>; |
| tx-fifo-depth = <4096>; |
| |
| status = "disabled"; |
| }; |
| |
| wifi: wifi@a000000 { |
| compatible = "qcom,wcn3990-wifi"; |
| reg = <0xa000000 0x800000>; |
| reg-names = "membase"; |
| memory-region = <&wlan_msa_mem>; |
| interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| blsp1_uart3: serial@78b2000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b2000 0x200>; |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart3_default>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c0: i2c@78b5000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b5000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_i2c0_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi0: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b5000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_spi0_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c1: i2c@78b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_i2c1_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi1: spi@78b6000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_spi1_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c2: i2c@78b7000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_i2c2_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi2: spi@78b7000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_spi2_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c3: i2c@78b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_i2c3_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi3: spi@78b8000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_spi3_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c4: i2c@78b9000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_i2c4_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp1_spi4: spi@78b9000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_spi4_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp2_dma: dma-controller@7ac4000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07ac4000 0x17000>; |
| interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp2_uart0: serial@7aef000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x07aef000 0x200>; |
| interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp2_uart0_default>; |
| status = "disabled"; |
| }; |
| |
| blsp2_i2c0: i2c@7af5000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x07af5000 0x600>; |
| interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp2_i2c0_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp2_spi0: spi@7af5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x07af5000 0x600>; |
| interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp2_spi0_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sram@8600000 { |
| compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; |
| reg = <0x08600000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ranges = <0 0x08600000 0x1000>; |
| |
| pil-reloc@94c { |
| compatible = "qcom,pil-reloc-info"; |
| reg = <0x94c 0xc8>; |
| }; |
| }; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, |
| <0x0b002000 0x1000>; |
| }; |
| |
| apcs_glb: mailbox@b011000 { |
| compatible = "qcom,qcs404-apcs-apps-global", |
| "qcom,msm8916-apcs-kpss-global", "syscon"; |
| reg = <0x0b011000 0x1000>; |
| #mbox-cells = <1>; |
| clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; |
| clock-names = "pll", "aux"; |
| #clock-cells = <0>; |
| }; |
| |
| apcs_hfpll: clock-controller@b016000 { |
| compatible = "qcom,qcs404-hfpll"; |
| reg = <0x0b016000 0x30>; |
| #clock-cells = <0>; |
| clock-output-names = "apcs_hfpll"; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| }; |
| |
| watchdog@b017000 { |
| compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; |
| reg = <0x0b017000 0x1000>; |
| clocks = <&sleep_clk>; |
| }; |
| |
| cpr: power-controller@b018000 { |
| compatible = "qcom,qcs404-cpr", "qcom,cpr"; |
| reg = <0x0b018000 0x1000>; |
| interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&xo_board>; |
| clock-names = "ref"; |
| vdd-apc-supply = <&pms405_s3>; |
| #power-domain-cells = <0>; |
| operating-points-v2 = <&cpr_opp_table>; |
| acc-syscon = <&tcsr>; |
| |
| nvmem-cells = <&cpr_efuse_quot_offset1>, |
| <&cpr_efuse_quot_offset2>, |
| <&cpr_efuse_quot_offset3>, |
| <&cpr_efuse_init_voltage1>, |
| <&cpr_efuse_init_voltage2>, |
| <&cpr_efuse_init_voltage3>, |
| <&cpr_efuse_quot1>, |
| <&cpr_efuse_quot2>, |
| <&cpr_efuse_quot3>, |
| <&cpr_efuse_ring1>, |
| <&cpr_efuse_ring2>, |
| <&cpr_efuse_ring3>, |
| <&cpr_efuse_revision>; |
| nvmem-cell-names = "cpr_quotient_offset1", |
| "cpr_quotient_offset2", |
| "cpr_quotient_offset3", |
| "cpr_init_voltage1", |
| "cpr_init_voltage2", |
| "cpr_init_voltage3", |
| "cpr_quotient1", |
| "cpr_quotient2", |
| "cpr_quotient3", |
| "cpr_ring_osc1", |
| "cpr_ring_osc2", |
| "cpr_ring_osc3", |
| "cpr_fuse_revision"; |
| }; |
| |
| timer@b120000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0b120000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@b121000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b121000 0x1000>, |
| <0x0b122000 0x1000>; |
| }; |
| |
| frame@b123000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b123000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b124000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b124000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b125000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b125000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b126000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b126000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b127000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb127000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b128000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0b128000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| remoteproc_adsp: remoteproc@c700000 { |
| compatible = "qcom,qcs404-adsp-pas"; |
| reg = <0x0c700000 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| |
| memory-region = <&adsp_fw_mem>; |
| |
| qcom,smem-states = <&adsp_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,remote-pid = <2>; |
| mboxes = <&apcs_glb 8>; |
| |
| label = "adsp"; |
| }; |
| }; |
| |
| pcie: pcie@10000000 { |
| compatible = "qcom,pcie-qcs404"; |
| reg = <0x10000000 0xf1d>, |
| <0x10000f20 0xa8>, |
| <0x07780000 0x2000>, |
| <0x10001000 0x2000>; |
| reg-names = "dbi", "elbi", "parf", "config"; |
| device_type = "pci"; |
| linux,pci-domain = <0>; |
| bus-range = <0x00 0xff>; |
| num-lanes = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ |
| <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ |
| |
| interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>; |
| clock-names = "iface", "aux", "master_bus", "slave_bus"; |
| |
| resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, |
| <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, |
| <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, |
| <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, |
| <&gcc GCC_PCIE_0_BCR>, |
| <&gcc GCC_PCIE_0_AHB_ARES>; |
| reset-names = "axi_m", |
| "axi_s", |
| "axi_m_sticky", |
| "pipe_sticky", |
| "pwr", |
| "ahb"; |
| |
| phys = <&pcie_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| |
| pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 10>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| adsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| adsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <94>, <432>; |
| interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 14>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| cdsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| cdsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-wcss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 18>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| wcss_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| wcss_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| thermal-zones { |
| aoss-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 0>; |
| |
| trips { |
| aoss_alert0: trip-point0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| q6-hvx-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 1>; |
| |
| trips { |
| q6_hvx_alert0: trip-point0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| lpass-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 2>; |
| |
| trips { |
| lpass_alert0: trip-point0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| wlan-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 3>; |
| |
| trips { |
| wlan_alert0: trip-point0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| cluster-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 4>; |
| |
| trips { |
| cluster_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cluster_alert1: trip-point1 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cluster_crit: cluster-crit { |
| temperature = <120000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| map0 { |
| trip = <&cluster_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 5>; |
| |
| trips { |
| cpu0_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpu0_alert1: trip-point1 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu0_crit: cpu-crit { |
| temperature = <120000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| map0 { |
| trip = <&cpu0_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 6>; |
| |
| trips { |
| cpu1_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpu1_alert1: trip-point1 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu1_crit: cpu-crit { |
| temperature = <120000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| map0 { |
| trip = <&cpu1_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 7>; |
| |
| trips { |
| cpu2_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpu2_alert1: trip-point1 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu2_crit: cpu-crit { |
| temperature = <120000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| map0 { |
| trip = <&cpu2_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 8>; |
| |
| trips { |
| cpu3_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpu3_alert1: trip-point1 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu3_crit: cpu-crit { |
| temperature = <120000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| cooling-maps { |
| map0 { |
| trip = <&cpu3_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| gpu-thermal { |
| polling-delay-passive = <250>; |
| |
| thermal-sensors = <&tsens 9>; |
| |
| trips { |
| gpu_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| }; |
| }; |