ARM: dts: imx: Introduce SPL and FIT labels to i.MX8M DTs binman nodes
Add binman_imx_spl and binman_imx_fit labels to nxp-imx8mimage {} and fit {}
nodes respectively, so they can be referened in board DTs no matter how deep
in the top level binman image description they are. Update current board DTs
to use those labels.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 6ab8f66..b9b1193 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -54,7 +54,7 @@
};
#endif
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <1>;
@@ -98,7 +98,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
index 90183af..183de46 100644
--- a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
@@ -35,12 +35,8 @@
bootph-pre-ram;
};
-&binman {
- section {
- fit {
- offset = <0x5fc00>;
- };
- };
+&binman_imx_fit {
+ offset = <0x5fc00>;
};
&gpio1 {
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index ba9967d..c9fb33c 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -103,7 +103,7 @@
};
#endif
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <2>;
@@ -169,7 +169,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
index cb37e28..c065fb8 100644
--- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
@@ -135,73 +135,69 @@
bootph-pre-ram;
};
-&binman {
- section {
- fit {
- images {
- fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast {
- description = "imx8mp-dhcom-som-overlay-eth1xfast";
- type = "flat_dt";
- compression = "none";
+&binman_imx_fit {
+ images {
+ fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast {
+ description = "imx8mp-dhcom-som-overlay-eth1xfast";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo";
- };
- };
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo";
+ };
+ };
- fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast {
- description = "imx8mp-dhcom-som-overlay-eth2xfast";
- type = "flat_dt";
- compression = "none";
+ fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast {
+ description = "imx8mp-dhcom-som-overlay-eth2xfast";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo";
- };
- };
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo";
+ };
+ };
- fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast {
- description = "imx8mp-dhcom-pdk-overlay-eth2xfast";
- type = "flat_dt";
- compression = "none";
+ fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast {
+ description = "imx8mp-dhcom-pdk-overlay-eth2xfast";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo";
- };
- };
+ blob-ext {
+ filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo";
+ };
+ };
- fdt-dto-imx8mp-dhcom-som-overlay-rev100 {
- description = "imx8mp-dhcom-som-overlay-rev100";
- type = "flat_dt";
- compression = "none";
+ fdt-dto-imx8mp-dhcom-som-overlay-rev100 {
+ description = "imx8mp-dhcom-som-overlay-rev100";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-rev100.dtbo";
- };
- };
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-rev100.dtbo";
+ };
+ };
- fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 {
- description = "imx8mp-dhcom-pdk3-overlay-rev100";
- type = "flat_dt";
- compression = "none";
+ fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 {
+ description = "imx8mp-dhcom-pdk3-overlay-rev100";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo";
- };
- };
+ blob-ext {
+ filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo";
};
+ };
+ };
- configurations {
- default = "@config-DEFAULT-SEQ";
+ configurations {
+ default = "@config-DEFAULT-SEQ";
- @config-SEQ {
- fdt = "fdt-1",
- "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast",
- "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast",
- "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast",
- "fdt-dto-imx8mp-dhcom-som-overlay-rev100",
- "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100";
- };
- };
+ @config-SEQ {
+ fdt = "fdt-1",
+ "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast",
+ "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast",
+ "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast",
+ "fdt-dto-imx8mp-dhcom-som-overlay-rev100",
+ "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100";
};
};
};
diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
index aff5dcf..21eff6d 100644
--- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
@@ -135,21 +135,17 @@
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
};
-&binman {
- section {
- fit {
- images {
- fip {
- description = "Trusted Firmware FIP";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- load = <0x40310000>;
+&binman_imx_fit {
+ images {
+ fip {
+ description = "Trusted Firmware FIP";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <0x40310000>;
- fip_blob: blob-ext{
- filename = "fip.bin";
- };
- };
+ fip_blob: blob-ext{
+ filename = "fip.bin";
};
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index c4c1a17..8b5ac3f 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -86,7 +86,7 @@
section {
pad-byte = <0x00>;
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <2>;
@@ -129,7 +129,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
index 1a4568d..98da015 100644
--- a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
@@ -10,14 +10,10 @@
bootph-pre-ram;
};
-&binman {
+&binman_imx_spl {
section {
- nxp-imx8mimage {
- section {
- signed-hdmi-imx8m {
- filename = "signed_dp_imx8m.bin";
- };
- };
+ signed-hdmi-imx8m {
+ filename = "signed_dp_imx8m.bin";
};
};
};
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 48dbe94..72da674 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -38,7 +38,7 @@
section {
pad-byte = <0x00>;
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <1>;
@@ -87,7 +87,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;