global: Migrate CONFIG_PL01x_PORTS to CFG
Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/README b/README
index 8354cf5..12672d2 100644
--- a/README
+++ b/README
@@ -418,7 +418,7 @@
If you have Amba PrimeCell PL011 UARTs, set this variable to
the clock speed of the UARTs.
- CONFIG_PL01x_PORTS
+ CFG_PL01x_PORTS
If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
define this to a list of base addresses for each (supported)
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index dd28819..7449e9b 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -29,7 +29,7 @@
#ifndef CONFIG_DM_SERIAL
-static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
+static volatile unsigned char *const port[] = CFG_PL01x_PORTS;
static enum pl01x_type pl01x_type __section(".data");
static struct pl01x_regs *base_regs __section(".data");
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index f8a20ea..6f46ca7 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -45,7 +45,7 @@
#define CFG_SYS_SERIAL2 0x21e0000
#define CFG_SYS_SERIAL3 0x21f0000
/*below might needs to be removed*/
-#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \
+#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \
(void *)CFG_SYS_SERIAL1, \
(void *)CFG_SYS_SERIAL2, \
(void *)CFG_SYS_SERIAL3 }
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 90cb1a5..6ebfee6 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -78,7 +78,7 @@
* Conflicts with AUART driver which can be set by board.
*/
#define CFG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
+#define CFG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
/* Default baudrate can be overridden by board! */
/* NAND */
diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index 0e7d019..2fa44e6 100644
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -77,7 +77,7 @@
* serial console configuration
*/
#define CFG_PL011_CLOCK 50000000
-#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
+#define CFG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
(void *)PHY_BASEADDR_UART1, \
(void *)PHY_BASEADDR_UART2, \
(void *)PHY_BASEADDR_UART3}
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index 350cc69..8f44c6f 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -32,7 +32,7 @@
/* Serial (pl011) */
#define UART_CLK (62500000)
#define CFG_PL011_CLOCK UART_CLK
-#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
+#define CFG_PL01x_PORTS {(void *)(0x2a400000)}
/* Support MTD */
#define CFG_SYS_FLASH_BASE (0x08000000)
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 3fc70de..ba7731b 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -117,7 +117,7 @@
/* PL011 Serial Configuration */
#define CFG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \
+#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \
(void *)CFG_SYS_SERIAL1}
#define CFG_SYS_SERIAL0 V2M_UART0