doc: FIT image: fix incorrect description of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image documentation files where this was not
observed, to not give bad examples to the reader.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 676f992..6a99089 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -138,31 +138,31 @@
Examples:
-- boot kernel "kernel@1" stored in a new uImage located at 200000:
-bootm 200000:kernel@1
+- boot kernel "kernel-1" stored in a new uImage located at 200000:
+bootm 200000:kernel-1
-- boot configuration "cfg@1" from a new uImage located at 200000:
-bootm 200000#cfg@1
+- boot configuration "cfg-1" from a new uImage located at 200000:
+bootm 200000#cfg-1
-- boot configuration "cfg@1" with extra "cfg@2" from a new uImage located
+- boot configuration "cfg-1" with extra "cfg-2" from a new uImage located
at 200000:
-bootm 200000#cfg@1#cfg@2
+bootm 200000#cfg-1#cfg-2
-- boot "kernel@1" from a new uImage at 200000 with initrd "ramdisk@2" found in
+- boot "kernel-1" from a new uImage at 200000 with initrd "ramdisk-2" found in
some other new uImage stored at address 800000:
-bootm 200000:kernel@1 800000:ramdisk@2
+bootm 200000:kernel-1 800000:ramdisk-2
-- boot "kernel@2" from a new uImage at 200000, with initrd "ramdisk@1" and FDT
- "fdt@1", both stored in some other new uImage located at 800000:
-bootm 200000:kernel@1 800000:ramdisk@1 800000:fdt@1
+- boot "kernel-2" from a new uImage at 200000, with initrd "ramdisk-1" and FDT
+ "fdt-1", both stored in some other new uImage located at 800000:
+bootm 200000:kernel-1 800000:ramdisk-1 800000:fdt-1
-- boot kernel "kernel@2" with initrd "ramdisk@2", both stored in a new uImage
+- boot kernel "kernel-2" with initrd "ramdisk-2", both stored in a new uImage
at address 200000, with a raw FDT blob stored at address 600000:
-bootm 200000:kernel@2 200000:ramdisk@2 600000
+bootm 200000:kernel-2 200000:ramdisk-2 600000
-- boot kernel "kernel@2" from new uImage at 200000 with FDT "fdt@1" from the
+- boot kernel "kernel-2" from new uImage at 200000 with FDT "fdt-1" from the
same new uImage:
-bootm 200000:kernel@2 - 200000:fdt@1
+bootm 200000:kernel-2 - 200000:fdt-1
Note on current image address
@@ -186,16 +186,16 @@
commands:
tftp 200000 /tftpboot/uImage
-bootm :kernel@1
+bootm :kernel-1
Last command is equivalent to:
-bootm 200000:kernel@1
+bootm 200000:kernel-1
tftp 200000 /tftpboot/uImage
-bootm 400000:kernel@1 :ramdisk@1
+bootm 400000:kernel-1 :ramdisk-1
Last command is equivalent to:
-bootm 400000:kernel@1 400000:ramdisk@1
+bootm 400000:kernel-1 400000:ramdisk-1
tftp 200000 /tftpboot/uImage
-bootm :kernel@1 400000:ramdisk@1 :fdt@1
+bootm :kernel-1 400000:ramdisk-1 :fdt-1
Last command is equivalent to:
-bootm 200000:kernel@1 400000:ramdisk@1 400000:fdt@1
+bootm 200000:kernel-1 400000:ramdisk-1 400000:fdt-1