imx: imxrt1050-evk: Add support for SPI flash booting
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig
index 8b5ce4e..086fc47 100644
--- a/configs/imxrt1050-evk_defconfig
+++ b/configs/imxrt1050-evk_defconfig
@@ -10,21 +10,22 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20280000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20020000
CONFIG_ENV_OFFSET=0x80000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk"
-CONFIG_SPL_TEXT_BASE=0x20209000
+CONFIG_SPL_TEXT_BASE=0x20002000
CONFIG_TARGET_IMXRT1050_EVK=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x20209000
+CONFIG_SYS_LOAD_ADDR=0x20002000
CONFIG_HAVE_SYS_UBOOT_START=y
CONFIG_SYS_UBOOT_START=0x800023FD
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SD_BOOT=y
+CONFIG_SPI_BOOT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=276
@@ -36,6 +37,7 @@
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
+CONFIG_SPL_NOR_SUPPORT=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set