arm: ls1021a: Add sata support on qds and twr board
Freescale ARM-based Layerscape LS102xA contain a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls1021aqds and ls1021atwr boards.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index 2d55782..2311468 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -9,6 +9,7 @@
obj-y += timer.o
obj-y += fsl_epu.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += ls102xa_sata.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
new file mode 100644
index 0000000..deeb674
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <ahci.h>
+#include <scsi.h>
+
+/* port register default value */
+#define AHCI_PORT_PHY_1_CFG 0xa003fffe
+#define AHCI_PORT_PHY_2_CFG 0x28183411
+#define AHCI_PORT_PHY_3_CFG 0x0e081004
+#define AHCI_PORT_PHY_4_CFG 0x00480811
+#define AHCI_PORT_PHY_5_CFG 0x192c96a4
+#define AHCI_PORT_TRANS_CFG 0x08000025
+
+#define SATA_ECC_REG_ADDR 0x20220520
+#define SATA_ECC_DISABLE 0x00020000
+
+int ls1021a_sata_init(void)
+{
+ struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
+ out_le32((void *)SATA_ECC_REG_ADDR, SATA_ECC_DISABLE);
+#endif
+
+ out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
+ out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
+ out_le32(&ccsr_ahci->pp4c, AHCI_PORT_PHY_4_CFG);
+ out_le32(&ccsr_ahci->pp5c, AHCI_PORT_PHY_5_CFG);
+ out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+ ahci_init((void __iomem *)AHCI_BASE_ADDR);
+ scsi_scan(0);
+
+ return 0;
+}