ARM: imx: vining2000: Clean up uSDHC4 setup
Simplify the uSDHC4 eMMC controller setup. This is the only eMMC
present on the system and only controller that is used, so drop
the extra logic.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c
index ef914b1..6dc3fc8 100644
--- a/board/softing/vining_2000/vining_2000.c
+++ b/board/softing/vining_2000/vining_2000.c
@@ -427,8 +427,6 @@
#include <spl.h>
#include <asm/arch/mx6-ddr.h>
-static struct fsl_esdhc_cfg usdhc_cfg = { USDHC4_BASE_ADDR };
-
static iomux_v3_cfg_t const pcie_pads[] = {
MX6_PAD_NAND_DATA02__GPIO4_IO_6 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
};
@@ -461,30 +459,13 @@
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
+static struct fsl_esdhc_cfg usdhc_cfg = { USDHC4_BASE_ADDR };
+
int board_mmc_init(bd_t *bis)
{
- struct src *src_regs = (struct src *)SRC_BASE_ADDR;
- u32 val;
- u32 port;
-
- val = readl(&src_regs->sbmr1);
-
- if ((val & 0xc0) != 0x40) {
- printf("Not boot from USDHC!\n");
- return -EINVAL;
- }
-
- port = (val >> 11) & 0x3;
- printf("port %d\n", port);
- switch (port) {
- case 3:
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
- usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- usdhc_cfg.esdhc_base = USDHC4_BASE_ADDR;
- break;
- }
+ imx_iomux_v3_setup_multiple_pads(usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
return fsl_esdhc_initialize(bis, &usdhc_cfg);
}