rockchip: board: puma_rk3399: build FIT image via u-boot.itb
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README
index 1a8d02b..250e345 100644
--- a/board/theobroma-systems/puma_rk3399/README
+++ b/board/theobroma-systems/puma_rk3399/README
@@ -56,8 +56,7 @@
=================
> tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin spl.img
- > tools/mkimage -f board/theobroma/puma_rk3399/fit_spl_atf.its \
- -E rk3399_bl3x.itb
+ > make CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb
Flash the image
===============
@@ -67,7 +66,7 @@
card.
> dd if=spl.img of=/dev/sdb seek=64
- > dd if=rk3399_bl3x.itb of=/dev/sdb seek=512
+ > dd if=u-boot.itb of=/dev/sdb seek=512
After powering up the board (with the inserted SD card), you should see
a U-Boot console on UART0 (115200n8).