Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig
This converts the following to Kconfig:
CONFIG_ARMV7_SECURE_BASE
CONFIG_ARMV7_SECURE_MAX_SIZE
CONFIG_ARMV7_SECURE_RESERVE_SIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index 2eeef3c..f1e4e26 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -27,6 +27,37 @@
This can be overridden at run-time by setting the bootm_boot_mode env.
variable to "sec" or "nonsec".
+config HAS_ARMV7_SECURE_BASE
+ bool "Enable support for a ahardware secure memory area"
+ default y if ARCH_LS1021A || ARCH_MX7 || ARCH_MX7ULP || ARCH_STM32MP \
+ || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || TEGRA124
+
+config ARMV7_SECURE_BASE
+ hex "Base address for secure mode memory"
+ depends on HAS_ARMV7_SECURE_BASE
+ default 0xfff00000 if TEGRA124
+ default 0x2ffc0000 if ARCH_STM32MP
+ default 0x2f000000 if ARCH_MX7ULP
+ default 0x10010000 if ARCH_LS1021A
+ default 0x00900000 if ARCH_MX7
+ default 0x00044000 if MACH_SUN8I
+ default 0x00020000 if MACH_SUN6I || MACH_SUN7I
+
+config ARMV7_SECURE_RESERVE_SIZE
+ hex
+ depends on TEGRA124 && HAS_ARMV7_SECURE_BASE
+ default 0x100000
+ help
+ Reserve top 1M for secure RAM
+
+config ARMV7_SECURE_MAX_SIZE
+ hex
+ depends on ARMV7_SECURE_BASE && ARCH_STM32MP || MACH_SUN6I \
+ || MACH_SUN7I || MACH_SUN8I
+ default 0xbc00 if MACH_SUN8I && !MACH_SUN8I_H3
+ default 0x3c00 if MACH_SUN8I && MACH_SUN8I_H3
+ default 0x10000
+
config ARMV7_VIRT
bool "Enable support for hardware virtualization" if EXPERT
depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 8917af3..a66aef0 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -9,6 +9,7 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PH23"
CONFIG_USB2_VBUS_PIN="PH23"
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index b50bae9..9815348 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -4,4 +4,5 @@
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
# CONFIG_NETDEVICES is not set
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
index 2d65d0f..a35fcdb 100644
--- a/configs/bananapi_m2_berry_defconfig
+++ b/configs/bananapi_m2_berry_defconfig
@@ -6,6 +6,7 @@
CONFIG_DRAM_CLK=576
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_USB1_VBUS_PIN="PH23"
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index 4f64147..192e9df 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -10,6 +10,7 @@
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_TARGET_MX7ULP_EVK=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SYS_LOAD_ADDR=0x60800000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig
index 0f8e9e8..a152c6e 100644
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@@ -10,6 +10,7 @@
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_TARGET_MX7ULP_EVK=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SYS_LOAD_ADDR=0x60800000
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi"
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 648cb2c..04b8d26 100644
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@@ -21,6 +21,7 @@
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
CONFIG_SYS_CLK_FREQ=66666666
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig
index f489555..351bc83 100644
--- a/configs/pg_wcom_expu1_update_defconfig
+++ b/configs/pg_wcom_expu1_update_defconfig
@@ -19,6 +19,7 @@
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
index bca0163..8e54fa5 100644
--- a/configs/pg_wcom_seli8_defconfig
+++ b/configs/pg_wcom_seli8_defconfig
@@ -21,6 +21,7 @@
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
CONFIG_SYS_CLK_FREQ=66666666
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig
index af1812b..1ca468a 100644
--- a/configs/pg_wcom_seli8_update_defconfig
+++ b/configs/pg_wcom_seli8_update_defconfig
@@ -19,6 +19,7 @@
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index e779663..28e347b 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -7,6 +7,7 @@
CONFIG_DRAM_CLK=504
CONFIG_DRAM_ODT_EN=y
CONFIG_I2C0_ENABLE=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 5719264..da935f7 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -114,8 +114,4 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-/* Reserve top 1M for secure RAM */
-#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
-#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
-
#endif /* __CONFIG_H */
diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h
index 2c406d3..1cc8609 100644
--- a/include/configs/cei-tk1-som.h
+++ b/include/configs/cei-tk1-som.h
@@ -28,8 +28,4 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-/* Reserve top 1M for secure RAM */
-#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
-#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
-
#endif /* __CONFIG_H */
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index a3c385b..b4c42fd 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -26,8 +26,4 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-/* Reserve top 1M for secure RAM */
-#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
-#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
-
#endif /* __CONFIG_H */
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 4e5228a..810eee8 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -7,8 +7,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index b6501e8..27a074c 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -7,8 +7,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
#define CONFIG_DEEP_SLEEP
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 824078d..3742203 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -6,8 +6,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
#define CONFIG_DEEP_SLEEP
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index fada8aa..a2e4c80 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -7,8 +7,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
#define CONFIG_DEEP_SLEEP
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index 2e976df..76c374a 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -31,8 +31,6 @@
/* MMC */
-#define CONFIG_ARMV7_SECURE_BASE 0x00900000
-
/*
* If we have defined the OPTEE ram size and not OPTEE it means that we were
* launched by OPTEE, because of that we shall skip all the low level
diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h
index 319de9b..d3ba144 100644
--- a/include/configs/mx7ulp_com.h
+++ b/include/configs/mx7ulp_com.h
@@ -70,7 +70,5 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#define CONFIG_ARMV7_SECURE_BASE 0x2F000000
-
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* __CONFIG_H */
diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
index 175d546..6b40cdb 100644
--- a/include/configs/stm32mp15_common.h
+++ b/include/configs/stm32mp15_common.h
@@ -10,12 +10,6 @@
#include <linux/sizes.h>
#include <asm/arch/stm32.h>
-#ifdef CONFIG_ARMV7_PSCI
-/* PSCI support */
-#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
-#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
-#endif
-
/*
* Configuration of the external SRAM memory used by U-Boot
*/
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index 1e490da..0b1fedd 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -11,13 +11,6 @@
#define __CONFIG_H
/*
- * A31 specific configuration
- */
-
-#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
-#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
-
-/*
* Include common sunxi configuration where most the settings are
*/
#include <configs/sunxi-common.h>
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 803a751..bc2779f 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -9,13 +9,6 @@
#define __CONFIG_H
/*
- * A20 specific configuration
- */
-
-#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
-#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
-
-/*
* Include common sunxi configuration where most the settings are
*/
#include <configs/sunxi-common.h>
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 5636356..106139d 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -14,16 +14,6 @@
#include <asm/arch/cpu.h>
-#ifdef SUNXI_SRAM_A2_SIZE
-/*
- * If the SoC has enough SRAM A2, use that for the secure monitor.
- * Skip the first 16 KiB of SRAM A2, which is not usable, as only certain bytes
- * are writable. Reserve the last 17 KiB for the resume shim and SCP firmware.
- */
-#define CONFIG_ARMV7_SECURE_BASE (SUNXI_SRAM_A2_BASE + 16 * 1024)
-#define CONFIG_ARMV7_SECURE_MAX_SIZE (SUNXI_SRAM_A2_SIZE - 33 * 1024)
-#endif
-
/*
* Include common sunxi configuration where most the settings are
*/