ARM: uniphier: split ProXstream2 board data and change DDR frequency
The DDR3 memory chips on ProXstream2 boards support up to 2133 MHz,
while only up to 1866MHz on PH1-LD6b boards.
Split the board data structure and change the DDR frequency of
ProXstream2 boards to 2133 MHz.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
index f328143..d075a11 100644
--- a/arch/arm/mach-uniphier/boards.c
+++ b/arch/arm/mach-uniphier/boards.c
@@ -74,8 +74,7 @@
};
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
- defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
static const struct uniphier_board_data proxstream2_data = {
.dram_ch0_base = 0x80000000,
.dram_ch0_size = 0x40000000,
@@ -86,6 +85,21 @@
.dram_ch2_base = 0xe0000000,
.dram_ch2_size = 0x20000000,
.dram_ch2_width = 16,
+ .dram_freq = 2133,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+static const struct uniphier_board_data ph1_ld6b_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x40000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xc0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_ch2_base = 0xe0000000,
+ .dram_ch2_size = 0x20000000,
+ .dram_ch2_width = 16,
.dram_freq = 1866,
};
#endif
@@ -115,7 +129,7 @@
{ "socionext,proxstream2", &proxstream2_data, },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
- { "socionext,ph1-ld6b", &proxstream2_data, },
+ { "socionext,ph1-ld6b", &ph1_ld6b_data, },
#endif
};