rockchip: tiger-rk3588: add PCIe support
This enables PCIe support on Tiger as exposed on
Q7_PCIE[0123]_[RT]X_[PN] signals and more specifically on the `PCI
Express` connector on the Haikou devkit.
This was tested with a PCIe to NVMe adapter (e.g.
https://www.amazon.de/dp/B07RZZ3TJG).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig
index 8fcdd06..8eb1027 100644
--- a/configs/tiger-rk3588_defconfig
+++ b/configs/tiger-rk3588_defconfig
@@ -14,6 +14,7 @@
CONFIG_DEBUG_UART_CLOCK=24000000
# CONFIG_DEBUG_UART_BOARD_INIT is not set
CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -41,6 +42,7 @@
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
# CONFIG_CMD_SF is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
@@ -89,6 +91,8 @@
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_PHY_ROCKCHIP_USBDP=y