WS cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c
index af65c55..52d9ead 100644
--- a/drivers/misc/atsha204a-i2c.c
+++ b/drivers/misc/atsha204a-i2c.c
@@ -339,7 +339,7 @@
retry--;
atsha204a_wakeup(dev);
} while (retry >= 0);
-
+
if (res) {
debug("ATSHA204A read failed\n");
return res;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 582129d..d0351b2 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -4,7 +4,7 @@
* drivers and users.
*
* Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- * Copyright © 2006 Red Hat UK Limited
+ * Copyright © 2006 Red Hat UK Limited
*
*/
@@ -123,7 +123,7 @@
} else {
*next = 0;
}
-
+
return ret;
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index b1fd779..0c26e1d 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -907,7 +907,7 @@
u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
u32 time_start;
-
+
time_start = get_timer(0);
while (get_timer(time_start) < timer) {
if (chip->dev_ready) {
diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c
index 5cc256b..d03b864 100644
--- a/drivers/mtd/nand/raw/nand_util.c
+++ b/drivers/mtd/nand/raw/nand_util.c
@@ -189,7 +189,7 @@
#define NAND_CMD_LOCK_TIGHT 0x2c
#define NAND_CMD_LOCK_STATUS 0x7a
-
+
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 61e38ba..e2bd326 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -115,7 +115,7 @@
#else
struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
#endif
-
+
#ifndef __UBOOT__
/* Serializes UBI devices creations and removals */
DEFINE_MUTEX(ubi_devices_mutex);
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index ffb1a61..753ca72 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -73,7 +73,7 @@
if (!(wol & BIT(12)) ||
((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) {
-
+
/* Looks like aneg failed after all */
if (!retries) {
printf("%s LPA corruption max attempts\n",
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 3e25cc7..47a930e 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -286,7 +286,7 @@
} else {
dev_dbg(dev, "cannot find st,mem_remap property\n");
}
-
+
swp_fmc = dev_read_u32_default(dev, "st,swp_fmc", NOT_FOUND);
if (swp_fmc != NOT_FOUND) {
/* set fmc swapping selection */
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index d4e0745..5896bcb 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -70,16 +70,16 @@
.rst_deassert = meson_reset_deassert,
};
-static const struct udevice_id meson_reset_ids[] = {
- { .compatible = "amlogic,meson-gxbb-reset" },
+static const struct udevice_id meson_reset_ids[] = {
+ { .compatible = "amlogic,meson-gxbb-reset" },
{ .compatible = "amlogic,meson-axg-reset" },
- { }
-};
+ { }
+};
static int meson_reset_probe(struct udevice *dev)
{
struct meson_reset_priv *priv = dev_get_priv(dev);
-
+
return regmap_init_mem(dev_ofnode(dev), &priv->regmap);
}
diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index ac4d082..a22623c 100644
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -233,7 +233,7 @@
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
- priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ priv->clk_bit_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bit-rate", UART_DM_CLK_RX_TX_BIT_RATE);
return 0;
diff --git a/drivers/usb/dwc3/dwc3-meson-gxl.c b/drivers/usb/dwc3/dwc3-meson-gxl.c
index 08467d6..7c26290 100644
--- a/drivers/usb/dwc3/dwc3-meson-gxl.c
+++ b/drivers/usb/dwc3/dwc3-meson-gxl.c
@@ -170,7 +170,7 @@
static int dwc3_meson_gxl_usb_init(struct dwc3_meson_gxl *priv)
{
int ret;
-
+
ret = dwc3_meson_gxl_usb2_init(priv);
if (ret)
return ret;
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index e9362f6..9fd01fa 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -190,7 +190,7 @@
/* SUNXI has different reg addresses, but identical r/w functions */
-#ifndef CONFIG_ARCH_SUNXI
+#ifndef CONFIG_ARCH_SUNXI
/*
* Common USB registers
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 8ac2f0a..61ff68d 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -159,7 +159,7 @@
static int _musb_destroy_int_queue(struct musb_host_data *host,
struct usb_device *dev, struct int_queue *queue)
{
- int index = usb_pipein(queue->urb.pipe) * 16 +
+ int index = usb_pipein(queue->urb.pipe) * 16 +
usb_pipeendpoint(queue->urb.pipe);
if (queue->urb.status == -EINPROGRESS)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index afbc648..ffed3b8 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -327,7 +327,7 @@
/* Set TXPKTRDY bit */
csr = readw(&musbr->txcsr);
-
+
csr |= MUSB_CSR0_TXPKTRDY;
csr |= MUSB_CSR0_H_DIS_PING;
writew(csr, &musbr->txcsr);
diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
index b050c42..3037ff3 100644
--- a/drivers/video/anx9804.c
+++ b/drivers/video/anx9804.c
@@ -67,11 +67,11 @@
printf("Error anx9804 clock is not stable\n");
i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
-
+
/* Set a bunch of analog related register values */
- i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
- i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
- i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
+ i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
+ i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
+ i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
@@ -105,7 +105,7 @@
i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
- /* Link training */
+ /* Link training */
i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
ANX9804_LINK_TRAINING_CTRL_EN);
mdelay(5);
diff --git a/drivers/video/tdo-tl070wsh30.c b/drivers/video/tdo-tl070wsh30.c
index 813b87a..7ad0af7 100644
--- a/drivers/video/tdo-tl070wsh30.c
+++ b/drivers/video/tdo-tl070wsh30.c
@@ -118,7 +118,7 @@
/* reset panel */
dm_gpio_set_value(&priv->reset, true);
-
+
mdelay(10);
dm_gpio_set_value(&priv->reset, false);