video: ipu_disp: remove pixclk fixup
The ipu display insists on having a lower_margin smaller
then 2. If this is not the case it will attempt to force
it and adjust the pixclk accordingly. This multiplies pixclk
in Hz with the width and height, since this is typically
a * 10^7 * b * 10^2 * c * 10^2 this will overflow the
uint_32 and make things even worse. Since this is a
bootloader and the adjustment is neglectible, just force
it to two and warn about it.
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
diff --git a/drivers/video/ipu_disp.c b/drivers/video/ipu_disp.c
index e97a204..48fee99 100644
--- a/drivers/video/ipu_disp.c
+++ b/drivers/video/ipu_disp.c
@@ -802,28 +802,6 @@
}
/*
- * This function is called to adapt synchronous LCD panel to IPU restriction.
- */
-void adapt_panel_to_ipu_restricitions(uint32_t *pixel_clk,
- uint16_t width, uint16_t height,
- uint16_t h_start_width,
- uint16_t h_end_width,
- uint16_t v_start_width,
- uint16_t *v_end_width)
-{
- if (*v_end_width < 2) {
- uint16_t total_width = width + h_start_width + h_end_width;
- uint16_t total_height_old = height + v_start_width +
- (*v_end_width);
- uint16_t total_height_new = height + v_start_width + 2;
- *v_end_width = 2;
- *pixel_clk = (*pixel_clk) * total_width * total_height_new /
- (total_width * total_height_old);
- printf("WARNING: adapt panel end blank lines\n");
- }
-}
-
-/*
* This function is called to initialize a synchronous LCD panel.
*
* @param disp The DI the panel is attached to.
@@ -880,9 +858,12 @@
if ((v_sync_width == 0) || (h_sync_width == 0))
return -EINVAL;
+ /* adapt panel to ipu restricitions */
+ if (v_end_width < 2) {
+ v_end_width = 2;
+ puts("WARNING: v_end_width (lower_margin) must be >= 2, adjusted\n");
+ }
+
- adapt_panel_to_ipu_restricitions(&pixel_clk, width, height,
- h_start_width, h_end_width,
- v_start_width, &v_end_width);
h_total = width + h_sync_width + h_start_width + h_end_width;
v_total = height + v_sync_width + v_start_width + v_end_width;