armv8: fsl: remove sata support
Remove the old implementation in order to enable DM for sata.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bfd6639..8028d52 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,8 +6,6 @@
#include <common.h>
#include <fsl_immap.h>
#include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
@@ -330,36 +328,6 @@
#endif
}
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
- ccsr_ahci = (void *)CONFIG_SYS_SATA2;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
- ccsr_ahci = (void *)CONFIG_SYS_SATA1;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA1);
- scsi_scan(false);
-#endif
-
- return 0;
-}
-#endif
-
/* Get VDD in the unit mV from voltage ID */
int get_core_volt_from_fuse(void)
{
@@ -400,25 +368,6 @@
}
#elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
- /* Disable SATA ECC */
- out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA);
- scsi_scan(false);
-
- return 0;
-}
-#endif
static void erratum_a009929(void)
{
@@ -719,9 +668,6 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- sata_init();
-#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 9a219a6..6e3a420f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -85,39 +85,7 @@
#define SVR_DEV(svr) ((svr) >> 8)
#define IS_SVR_DEV(svr, dev) (((svr) >> 16) == (dev))
-/* ahci port register default value */
-#define AHCI_PORT_PHY_1_CFG 0xa003fffe
-#define AHCI_PORT_PHY2_CFG 0x28184d1f
-#define AHCI_PORT_PHY3_CFG 0x0e081509
-#define AHCI_PORT_TRANS_CFG 0x08000029
-#define AHCI_PORT_AXICC_CFG 0x3fffffff
-
#ifndef __ASSEMBLY__
-/* AHCI (sata) register map */
-struct ccsr_ahci {
- u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
- u32 pcfg; /* port config */
- u32 ppcfg; /* port phy1 config */
- u32 pp2c; /* port phy2 config */
- u32 pp3c; /* port phy3 config */
- u32 pp4c; /* port phy4 config */
- u32 pp5c; /* port phy5 config */
- u32 axicc; /* AXI cache control */
- u32 paxic; /* port AXI config */
- u32 axipc; /* AXI PROT control */
- u32 ptc; /* port Trans Config */
- u32 pts; /* port Trans Status */
- u32 plc; /* port link config */
- u32 plc1; /* port link config1 */
- u32 plc2; /* port link config2 */
- u32 pls; /* port link status */
- u32 pls1; /* port link status1 */
- u32 pcmdc; /* port CMD config */
- u32 ppcs; /* port phy control status */
- u32 pberr; /* port 0/1 BIST error */
- u32 cmds; /* port 0/1 CMD status error */
-};
-
#ifdef CONFIG_FSL_LSCH3
void fsl_lsch3_early_init_f(void);
int get_core_volt_from_fuse(void);