sunxi: docs: Mention CONFIG_NAND requirement
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
diff --git a/board/sunxi/README.nand b/board/sunxi/README.nand
index a5d4ff0..98ebe5f 100644
--- a/board/sunxi/README.nand
+++ b/board/sunxi/README.nand
@@ -20,9 +20,9 @@
In order to accomodate that, we create a tool that will generate an
SPL image that is ready to be programmed directly embedding the ECCs,
randomized, and with the necessary bits needed to reduce the number of
-bitflips. The U-Boot build system, when configured for the NAND will
-also generate the image sunxi-spl-with-ecc.bin that will have been
-generated by that tool.
+bitflips. The U-Boot build system, when configured for the NAND (with
+CONFIG_NAND=y) will also generate the image sunxi-spl-with-ecc.bin
+that will have been generated by that tool.
In order to flash your U-Boot image onto a board, assuming that the
board is in FEL mode, you'll need the sunxi-tools that you can find at