arm: mvebu: a38x: Remove dead code ARMADA_39X
Config option ARMADA_39X is never set so remove all dead code hidden under
ifdef CONFIG_ARMADA_39X blocks.
Also remove useless checks for CONFIG_ARMADA_38X define as this macro is
always defined for a38x code path.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index c3f8ad8..52473ad 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -164,7 +164,7 @@
int ddr3_init(void);
/* Auto Voltage Scaling */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
+#if defined(CONFIG_ARMADA_38X)
void mv_avs_init(void);
void mv_rtc_config(void);
#else
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index ae2a361..3b41c7d 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -14,11 +14,6 @@
#include "sys_env_lib.h"
#include "ctrl_pex.h"
-#if defined(CONFIG_ARMADA_38X)
-#elif defined(CONFIG_ARMADA_39X)
-#else
-#error "No device is defined"
-#endif
/*
@@ -79,11 +74,6 @@
{ NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */
{ NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */
{ NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */
-#ifdef CONFIG_ARMADA_39X
- { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */
- { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */
- { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */
-#endif
{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */
};
@@ -798,11 +788,9 @@
*/
u8 hws_ctrl_serdes_rev_get(void)
{
-#ifdef CONFIG_ARMADA_38X
/* for A38x-Z1 */
if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID)
return MV_SERDES_REV_1_2;
-#endif
/* for A39x-Z1, A38x-A0 */
return MV_SERDES_REV_2_1;
@@ -1351,9 +1339,6 @@
case SGMII0:
case SGMII1:
case SGMII2:
-#ifdef CONFIG_ARMADA_39X
- case SGMII3:
-#endif
if (baud_rate == SERDES_SPEED_1_25_GBPS)
seq_id = SGMII_1_25_SPEED_CONFIG_SEQ;
else if (baud_rate == SERDES_SPEED_3_125_GBPS)
@@ -1362,14 +1347,6 @@
case QSGMII:
seq_id = QSGMII_5_SPEED_CONFIG_SEQ;
break;
-#ifdef CONFIG_ARMADA_39X
- case XAUI:
- seq_id = XAUI_3_125_SPEED_CONFIG_SEQ;
- break;
- case RXAUI:
- seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ;
- break;
-#endif
default:
return SERDES_LAST_SEQ;
}
@@ -2054,13 +2031,6 @@
(serdes_num,
PEX_CONFIG_REF_CLOCK_100MHZ_SEQ));
return MV_OK;
-#ifdef CONFIG_ARMADA_39X
- case REF_CLOCK_40MHZ:
- CHECK_STATUS(mv_seq_exec
- (serdes_num,
- PEX_CONFIG_REF_CLOCK_40MHZ_SEQ));
- return MV_OK;
-#endif
default:
printf
("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n",
@@ -2104,22 +2074,6 @@
return MV_BAD_PARAM;
}
break;
-#ifdef CONFIG_ARMADA_39X
- case SGMII3:
- case XAUI:
- case RXAUI:
- if (ref_clock == REF_CLOCK_25MHZ) {
- data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1;
- } else if (ref_clock == REF_CLOCK_40MHZ) {
- data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
- } else {
- printf
- ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
- serdes_type);
- return MV_BAD_PARAM;
- }
- break;
-#endif
default:
DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n");
return MV_BAD_PARAM;
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
index 3c4c7e0..950680a 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
@@ -12,7 +12,6 @@
#include "seq_exec.h"
#include "sys_env_lib.h"
-#ifdef CONFIG_ARMADA_38X
enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
/* 6820 6810 6811 6828 */
/* PEX_UNIT_ID */ { 4, 3, 3, 4},
@@ -24,19 +23,6 @@
/* XAUI_UNIT_ID */ { 0, 0, 0, 0},
/* RXAUI_UNIT_ID */ { 0, 0, 0, 0}
};
-#else /* if (CONFIG_ARMADA_39X) */
-enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
-/* 6920 6928 */
-/* PEX_UNIT_ID */ { 4, 4},
-/* ETH_GIG_UNIT_ID */ { 3, 4},
-/* USB3H_UNIT_ID */ { 1, 2},
-/* USB3D_UNIT_ID */ { 0, 1},
-/* SATA_UNIT_ID */ { 0, 4},
-/* QSGMII_UNIT_ID */ { 0, 1},
-/* XAUI_UNIT_ID */ { 1, 1},
-/* RXAUI_UNIT_ID */ { 1, 1}
-};
-#endif
u32 g_dev_id = -1;
@@ -202,11 +188,7 @@
return ctrl_id;
default:
/* Device ID Default for A38x: 6820 , for A39x: 6920 */
- #ifdef CONFIG_ARMADA_38X
default_ctrl_id = MV_6820_DEV_ID;
- #else
- default_ctrl_id = MV_6920_DEV_ID;
- #endif
printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
__func__, ctrl_id, default_ctrl_id);
return default_ctrl_id;
@@ -261,9 +243,6 @@
{
u32 i, val;
- if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X)))
- return;
-
/* Activate pipe0 for read/write transaction, and set XBAR client number #1 */
val = 0x1 << DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS |
0x1 << DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS;
@@ -278,9 +257,6 @@
{
u32 sar_freq;
- if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X)))
- return;
-
reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
index 17cd811..118bf56 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
@@ -118,12 +118,8 @@
/* TWSI addresses */
/* starting from A38x A0, i2c address of EEPROM is 0x57 */
-#ifdef CONFIG_ARMADA_39X
-#define EEPROM_I2C_ADDR 0x50
-#else
#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \
MV_88F68XX_Z1_ID ? 0x50 : 0x57)
-#endif
#define RD_GET_MODE_ADDR 0x4c
#define DB_GET_MODE_SLM1363_ADDR 0x25
#define DB_GET_MODE_SLM1364_ADDR 0x24
@@ -216,7 +212,6 @@
#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \
A39X_MARVELL_BOARD_ID_BASE)
-#ifdef CONFIG_ARMADA_38X
#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE
#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0
#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1
@@ -227,18 +222,6 @@
#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM
#define MV_DEFAULT_BOARD_ID DB_68XX_ID
#define MV_DEFAULT_DEVICE_ID MV_6811
-#elif defined(CONFIG_ARMADA_39X)
-#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE
-#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0
-#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1
-#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID
-#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM
-#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE
-#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID
-#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM
-#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID
-#define MV_DEFAULT_DEVICE_ID MV_6920
-#endif
#define MV_INVALID_BOARD_ID 0xffffffff
@@ -295,11 +278,7 @@
#define MV_6920_INDEX 0
#define MV_6928_INDEX 1
-#ifdef CONFIG_ARMADA_38X
#define MAX_DEV_ID_NUM 4
-#else
-#define MAX_DEV_ID_NUM 2
-#endif
#define MV_6820_INDEX 0
#define MV_6810_INDEX 1
@@ -340,21 +319,13 @@
* If suspend to RAM is not supported set '-1'
*/
#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
#else
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{RD_NAS_68XX_ID, -2 }, \
{DB_68XX_ID, -1 }, \
@@ -364,12 +335,6 @@
{DB_BP_6821_ID, -2 }, \
{DB_AMC_6820_ID, -2 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_RD_69XX_ID, -1 }, \
- {A39X_DB_69XX_ID, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
u32 mv_board_tclk_get(void);
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
index 7f7df67..6523281 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
@@ -915,10 +915,8 @@
DEBUG_LEVELING(DEBUG_LEVEL_ERROR, ("training done failed\n"));
} else { /* check for training pass */
reg_data = data_read[0];
-#if defined(CONFIG_ARMADA_38X) /* JIRA #1498 for 16 bit with ECC */
if (tm->bus_act_mask == 0xb) /* set to data to 0 to skip the check */
reg_data = 0;
-#endif
if (reg_data != PASS)
DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("training result failed\n"));
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
index da0d63d..faafc86 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
@@ -559,11 +559,7 @@
static int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr)
{
-#if defined(CONFIG_ARMADA_39X)
- info_ptr->device_id = 0x6900;
-#else
info_ptr->device_id = 0x6800;
-#endif
info_ptr->ck_delay = ck_delay;
return MV_OK;
@@ -666,11 +662,7 @@
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_TIP_REV, MV_TIP_REV_4);
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_PHY_EDGE, MV_DDR_PHY_EDGE_POSITIVE);
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_OCTET_PER_INTERFACE, DDR_INTERFACE_OCTETS_NUM);
-#ifdef CONFIG_ARMADA_39X
- ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 1);
-#else
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 0);
-#endif
ca_delay = 0;
delay_enable = 1;
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
index cf51420..10b0d45 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
@@ -79,7 +79,6 @@
* If suspend to RAM is not supported set '-1'
*/
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{RD_NAS_68XX_ID, -2 }, \
{DB_68XX_ID, -1 }, \
@@ -89,12 +88,6 @@
{DB_BP_6821_ID, -2 }, \
{DB_AMC_6820_ID, -2 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_RD_69XX_ID, -1 }, \
- {A39X_DB_69XX_ID, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void);
u32 mv_ddr_sys_env_get_cs_ena_from_reg(void);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e793cd1..819e362 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -43,7 +43,6 @@
CONFIG_ARMADA100
CONFIG_ARMADA100_FEC
CONFIG_ARMADA168
-CONFIG_ARMADA_39X
CONFIG_ARMV7_SECURE_BASE
CONFIG_ARMV7_SECURE_MAX_SIZE
CONFIG_ARMV7_SECURE_RESERVE_SIZE
diff --git a/tools/Makefile b/tools/Makefile
index 2d55043..62de7e6 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -150,12 +150,12 @@
HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS)
endif
-ifneq ($(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
+ifneq ($(CONFIG_ARMADA_38X),)
HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE
endif
# MXSImage needs LibSSL
-ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
+ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
HOSTCFLAGS_kwbimage.o += \
$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
HOSTLDLIBS_mkimage += \