/*
 * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
 *
 * Base on code from TI. Original Notices follow:
 *
 * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
 *
 * Modified for DA8xx EVM.
 *
 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
 *
 * Parts are shamelessly stolen from various TI sources, original copyright
 * follows:
 * -----------------------------------------------------------------
 *
 * Copyright (C) 2004 Texas Instruments.
 *
 * ----------------------------------------------------------------------------
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 * ----------------------------------------------------------------------------
 */

#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include "../common/misc.h"

DECLARE_GLOBAL_DATA_PTR;

#define pinmux	&davinci_syscfg_regs->pinmux

#ifdef CONFIG_SPI_FLASH
/* SPI0 pin muxer settings */
const struct pinmux_config spi0_pins[] = {
	{ pinmux[7], 1, 3 },
	{ pinmux[7], 1, 4 },
	{ pinmux[7], 1, 5 },
	{ pinmux[7], 1, 6 },
	{ pinmux[7], 1, 7 }
};
#endif

/* UART pin muxer settings */
const struct pinmux_config uart_pins[] = {
	{ pinmux[8], 2, 7 },
	{ pinmux[9], 2, 0 }
};

/* I2C pin muxer settings */
const struct pinmux_config i2c_pins[] = {
	{ pinmux[9], 2, 3 },
	{ pinmux[9], 2, 4 }
};

int board_init(void)
{
#ifndef CONFIG_USE_IRQ
	/*
	 * Mask all IRQs by clearing the global enable and setting
	 * the enable clear for all the 90 interrupts.
	 */

	writel(0, &davinci_aintc_regs->ger);

	writel(0, &davinci_aintc_regs->hier);

	writel(0xffffffff, &davinci_aintc_regs->ecr1);
	writel(0xffffffff, &davinci_aintc_regs->ecr2);
	writel(0xffffffff, &davinci_aintc_regs->ecr3);
#endif

	/* arch number of the board */
	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;

	/* address of boot parameters */
	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;

	/*
	 * Power on required peripherals
	 * ARM does not have access by default to PSC0 and PSC1
	 * assuming here that the DSP bootloader has set the IOPU
	 * such that PSC access is available to ARM
	 */
	lpsc_on(DAVINCI_LPSC_AEMIF);    /* NAND, NOR */
	lpsc_on(DAVINCI_LPSC_SPI0);     /* Serial Flash */
	lpsc_on(DAVINCI_LPSC_EMAC);     /* image download */
	lpsc_on(DAVINCI_LPSC_UART2);    /* console */
	lpsc_on(DAVINCI_LPSC_GPIO);

	/* setup the SUSPSRC for ARM to control emulation suspend */
	writel(readl(&davinci_syscfg_regs->suspsrc) &
	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
		 DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
		 DAVINCI_SYSCFG_SUSPSRC_UART2),
	       &davinci_syscfg_regs->suspsrc);

#ifdef CONFIG_SPI_FLASH
	if (davinci_configure_pin_mux(spi0_pins, ARRAY_SIZE(spi0_pins)) != 0)
		return 1;
#endif

	if (davinci_configure_pin_mux(uart_pins, ARRAY_SIZE(uart_pins)) != 0)
		return 1;

	if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
		return 1;

	/* enable the console UART */
	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
		DAVINCI_UART_PWREMU_MGMT_UTRST),
	       &davinci_uart2_ctrl_regs->pwremu_mgmt);

	return(0);
}