tegra: Rework Tamonten support
This commit uses the common Tegra board implementation instead of
duplicating a lot of the code. In addition, the Plutux and Medcom
specific board files can be removed as the MMC/SD setup is common
among all Tamonten-based boards.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
index f23b657..d9ecd23 100644
--- a/board/avionic-design/common/tamonten.c
+++ b/board/avionic-design/common/tamonten.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
+ * (C) Copyright 2011-2012
* Avionic Design GmbH <www.avionic-design.de>
*
* See file CREDITS for list of people who contributed to this
@@ -36,25 +36,17 @@
#include <asm/arch/pinmux.h>
#include <asm/arch/uart.h>
#include <asm/arch/mmc.h>
-#include "tamonten.h"
#ifdef CONFIG_TEGRA2_MMC
#include <mmc.h>
#endif
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct tegra2_sysinfo sysinfo = {
- CONFIG_TEGRA2_BOARD_STRING
-};
-
/*
- * Routine: timer_init
- * Description: init the timestamp and lastinc value
+ * Routine: gpio_config_uart
+ * Description: Does nothing on Tamonten - no conflict w/SPI.
*/
-int timer_init(void)
+void gpio_config_uart(void)
{
- return 0;
}
#ifdef CONFIG_TEGRA2_MMC
@@ -65,46 +57,19 @@
static void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
+ /* for CD GPIO PH2 */
+ pinmux_tristate_disable(PINGRP_ATD);
}
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- clock_init();
- clock_verify();
-
- /* boot param addr */
- gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
- return 0;
-}
-
-#ifdef CONFIG_TEGRA2_MMC
/* this is a weak define that we are overriding */
int board_mmc_init(bd_t *bd)
{
- debug("board_mmc_init called\n");
/* Enable muxes, etc. for SDMMC controllers */
pin_mux_mmc();
- gpio_config_mmc();
- debug("board_mmc_init: init eMMC\n");
- /* init dev 0, eMMC chip, with 4-bit bus */
+ /* init dev 0, SD slot, with 4-bit bus */
tegra2_mmc_init(0, 4, -1, GPIO_PH2);
return 0;
}
#endif
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
- /* Initialize selected UARTs */
- board_init_uart_f();
- return 0;
-}
-#endif /* EARLY_INIT */
diff --git a/board/avionic-design/common/tamonten.h b/board/avionic-design/common/tamonten.h
deleted file mode 100644
index 0e60b0f..0000000
--- a/board/avionic-design/common/tamonten.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
- * Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TAMONTEN_H_
-#define _TAMONTEN_H_
-
-void tegra2_start(void);
-void gpio_config_mmc(void);
-
-#endif /* TAMONTEN_H */
diff --git a/board/avionic-design/medcom/Makefile b/board/avionic-design/medcom/Makefile
index b0c318c..d96d043 100644
--- a/board/avionic-design/medcom/Makefile
+++ b/board/avionic-design/medcom/Makefile
@@ -1,7 +1,7 @@
#
# (C) Copyright 2010,2011
# NVIDIA Corporation <www.nvidia.com>
-# (C) Copyright 2011
+# (C) Copyright 2011,2012
# Avionic Design GmbH <www.avionic-design.de>
#
# See file CREDITS for list of people who contributed to this
@@ -26,12 +26,12 @@
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
endif
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
+COBJS := ../../nvidia/common/board.o
COBJS += ../common/tamonten.o
SRCS := $(COBJS:.o=.c)
diff --git a/board/avionic-design/medcom/medcom.c b/board/avionic-design/medcom/medcom.c
deleted file mode 100644
index 42c8094..0000000
--- a/board/avionic-design/medcom/medcom.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
- * Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/tegra2.h>
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SD card
- */
-void gpio_config_mmc(void)
-{
- /* configure pin as input for card detect */
- gpio_request(GPIO_PH2, "SD4 CD");
- gpio_direction_input(GPIO_PH2);
-}
-#endif
diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile
index b0c318c..d96d043 100644
--- a/board/avionic-design/plutux/Makefile
+++ b/board/avionic-design/plutux/Makefile
@@ -1,7 +1,7 @@
#
# (C) Copyright 2010,2011
# NVIDIA Corporation <www.nvidia.com>
-# (C) Copyright 2011
+# (C) Copyright 2011,2012
# Avionic Design GmbH <www.avionic-design.de>
#
# See file CREDITS for list of people who contributed to this
@@ -26,12 +26,12 @@
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
endif
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
+COBJS := ../../nvidia/common/board.o
COBJS += ../common/tamonten.o
SRCS := $(COBJS:.o=.c)
diff --git a/board/avionic-design/plutux/plutux.c b/board/avionic-design/plutux/plutux.c
deleted file mode 100644
index 42c8094..0000000
--- a/board/avionic-design/plutux/plutux.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
- * Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/tegra2.h>
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SD card
- */
-void gpio_config_mmc(void)
-{
- /* configure pin as input for card detect */
- gpio_request(GPIO_PH2, "SD4 CD");
- gpio_direction_input(GPIO_PH2);
-}
-#endif