arm64: rk3399: r4s: correct the LEDS label name
Correct the LEDS label name and remove the board type prefix,
which is actually unnecessary here, removes the redefined system status LED pin.
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index 6f2cf17..7470c26 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -76,18 +76,17 @@
&leds {
lan_led: led-1 {
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:lan";
+ label = "green:lan";
};
wan_led: led-2 {
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:wan";
+ label = "green:wan";
};
};
&leds_gpio {
rockchip,pins =
- <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};