ARM: psci: move GIC address override to Kconfig
As the code to switch an ARM core from secure to the non-secure state
needs to know the base address of the Generic Interrupt Controller
(GIC), we read an Arm Cortex defined system register that is supposed to
hold that base address. However there are SoCs out there that get this
wrong, and this CBAR register either reads as 0 or points to the wrong
address. To accommodate those systems, so far we use a macro defined in
some platform specific header files, for affected boards.
To simplify future extensions, replace that macro with a Kconfig variable
that holds this override address, and define a default value for SoCs
that need it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index ccc2f20..f015d13 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -58,6 +58,16 @@
default 0x3c00 if MACH_SUN8I && MACH_SUN8I_H3
default 0x10000
+config ARM_GIC_BASE_ADDRESS
+ hex
+ depends on ARMV7_NONSEC
+ depends on ARCH_EXYNOS5
+ default 0x10480000 if ARCH_EXYNOS5
+ help
+ Override the GIC base address if the Arm Cortex defined
+ CBAR/PERIPHBASE system register holds the wrong value.
+ Used by the PSCI code to configure the secure side of the GIC.
+
config ARMV7_VIRT
bool "Enable support for hardware virtualization" if EXPERT
depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 9004074..bed40fa 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -112,8 +112,8 @@
ENDPROC(_do_nonsec_entry)
.macro get_cbar_addr addr
-#ifdef CFG_ARM_GIC_BASE_ADDRESS
- ldr \addr, =CFG_ARM_GIC_BASE_ADDRESS
+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
+ ldr \addr, =CONFIG_ARM_GIC_BASE_ADDRESS
#else
mrc p15, 4, \addr, c15, c0, 0 @ read CBAR
bfc \addr, #0, #15 @ clear reserved bits
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index c82b215..5ffeca1 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -26,8 +26,8 @@
static unsigned long get_gicd_base_address(void)
{
-#ifdef CFG_ARM_GIC_BASE_ADDRESS
- return CFG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
+ return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
#else
unsigned periphbase;
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index b56effc..fa64256 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -18,7 +18,4 @@
#define CFG_SMP_PEN_ADDR 0x02020000
-/* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
-#define CFG_ARM_GIC_BASE_ADDRESS 0x10480000
-
#endif /* __CONFIG_H */