* Add support for ext2 filesystems and image timestamps to TQM5200 board
* Add reset code for Coral-P on INKA4x0 board
* Patch by Martin Krause, 28 Jun 2004:
Update for TRAB board.
* Fix some missing "volatile"s in MPC5xxx FEC driver
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index df2d87f..ca68682 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -31,6 +31,16 @@
#include "Pt1000_temp_data.h"
+/* helper function */
+#define abs(value) (((value) < 0) ? ((value)*-1) : (value))
+
+/*
+ * Maximal allowed deviation between two immediate meassurments of an analog
+ * thermo channel. 1 DIGIT = 0.0276 °C. This is used to filter sporadic
+ * "jumps" in measurment.
+ */
+#define MAX_DEVIATION 18 /* unit: DIGITs of adc; 18 DIGIT = 0.5 °C */
+
void spi_init(void)
{
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@@ -227,15 +237,48 @@
long adc_pt1000, offset;
long u_pt1000;
long contact_temp;
-
+ long temp1, temp2;
tsc2000_reg_init ();
tsc2000_set_range (3);
- adc_pt1000 = tsc2000_read_channel (14);
+ /*
+ * Because of sporadic "jumps" in the measured adc values every
+ * channel is read two times. If there is a significant difference
+ * between the two measurements, then print an error and do a third
+ * measurement, because it is very unlikely that a successive third
+ * measurement goes also wrong.
+ */
+ temp1 = tsc2000_read_channel (14);
+ temp2 = tsc2000_read_channel (14);
+ if (abs(temp2 - temp1) < MAX_DEVIATION)
+ adc_pt1000 = temp2;
+ else {
+ printf ("%s: read adc value (channel 14) exceeded max allowed "
+ "deviation: %d * 0.0276 °C\n",
+ __FUNCTION__, MAX_DEVIATION);
+ printf ("adc value 1: %ld DIGITs\nadc value 2: %ld DIGITs\n",
+ temp1, temp2);
+ adc_pt1000 = tsc2000_read_channel (14);
+ printf ("use (third read) adc value: adc_pt1000 = "
+ "%ld DIGITs\n", adc_pt1000);
+ }
debug ("read channel 14 (pt1000 adc value): %ld\n", adc_pt1000);
- offset = tsc2000_read_channel (15);
+ temp1 = tsc2000_read_channel (15);
+ temp2 = tsc2000_read_channel (15);
+ if (abs(temp2 - temp1) < MAX_DEVIATION)
+ offset = temp2;
+ else {
+ printf ("%s: read adc value (channel 15) exceeded max allowed "
+ "deviation: %d * 0.0276 °C\n",
+ __FUNCTION__, MAX_DEVIATION);
+ printf ("adc value 1: %ld DIGITs\nadc value 2: %ld DIGITs\n",
+ temp1, temp2);
+ offset = tsc2000_read_channel (15);
+ printf ("use (third read) adc value: offset = %ld DIGITs\n",
+ offset);
+ }
debug ("read channel 15 (offset): %ld\n", offset);
/*