clk: qcom: add driver for SM8150 SoC
Add clock, reset and power domain driver for SM8150. Driver code is
based on the similar U-Boot drivers. All constants are taken from the
corresponding Linux driver.
This driver supports clock rate setting only debug UART,
RGMII/Ethernet modules and USB controller.
Co-authored-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Julius Lehmann <lehmanju@devpi.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index e223c13..ab33f1c 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_CLK_QCOM_QCS404) += clock-qcs404.o
obj-$(CONFIG_CLK_QCOM_SC7280) += clock-sc7280.o
obj-$(CONFIG_CLK_QCOM_SM6115) += clock-sm6115.o
+obj-$(CONFIG_CLK_QCOM_SM8150) += clock-sm8150.o
obj-$(CONFIG_CLK_QCOM_SM8250) += clock-sm8250.o
obj-$(CONFIG_CLK_QCOM_SM8550) += clock-sm8550.o
obj-$(CONFIG_CLK_QCOM_SM8650) += clock-sm8650.o