sunxi: eMMC: support TOC0 on boot partitions
To determine whether we have been booted from an eMMC boot partition, we
replay some of the checks that the BROM must have done to successfully
load the SPL. This involves a checksum check, which currently relies on
the SPL being wrapped in an "eGON" header.
If a board has secure boot enabled, the BROM will only accept the "TOC0"
format, which is internally very different, but uses the same
checksumming algorithm. Actually the only difference for calculating the
checksum is that the size of the SPL is stored at a different offset.
Do a header check to determine whether we deal with an eGON or TOC0
format, then set the SPL size accordingly. The rest of the code is
unchanged.
This fixes booting from an eMMC boot partition on devices with secure
boot enabled, like the Remix Mini PC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 03f5155..391a65a 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -364,6 +364,7 @@
struct blk_desc *bd = mmc_get_blk_desc(mmc);
u32 *buffer = (void *)(uintptr_t)CONFIG_TEXT_BASE;
struct boot_file_head *egon_head = (void *)buffer;
+ struct toc0_main_info *toc0_info = (void *)buffer;
int bootpart = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
uint32_t spl_size, emmc_checksum, chksum = 0;
ulong count;
@@ -390,11 +391,17 @@
/* Read the first block to do some sanity checks on the eGON header. */
count = blk_dread(bd, 0, 1, buffer);
- if (count != 1 || !sunxi_egon_valid(egon_head))
+ if (count != 1)
return false;
+ if (sunxi_egon_valid(egon_head))
+ spl_size = egon_head->length;
+ else if (sunxi_toc0_valid(toc0_info))
+ spl_size = toc0_info->length;
+ else
+ return false;
+
/* Read the rest of the SPL now we know it's halfway sane. */
- spl_size = buffer[4];
count = blk_dread(bd, 1, DIV_ROUND_UP(spl_size, bd->blksz) - 1,
buffer + bd->blksz / 4);