ARM:AM33XX: Add emif/ddr support
This patch adds AM33xx emif/ddr support along with board specific
defines.
Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index fc25587..7ed6678 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -20,6 +20,9 @@
COBJS += clock.o
COBJS += sys_info.o
+COBJS += ddr.o
+COBJS += emif4.o
+
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
new file mode 100644
index 0000000..ed982c1
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -0,0 +1,147 @@
+/*
+ * DDR Configuration for AM33xx devices.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated -
+http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/io.h>
+
+/**
+ * Base address for EMIF instances
+ */
+static struct emif_regs *emif_reg = {
+ (struct emif_regs *)EMIF4_0_CFG_BASE};
+
+/**
+ * Base address for DDR instance
+ */
+static struct ddr_regs *ddr_reg[2] = {
+ (struct ddr_regs *)DDR_PHY_BASE_ADDR,
+ (struct ddr_regs *)DDR_PHY_BASE_ADDR2};
+
+/**
+ * Base address for ddr io control instances
+ */
+static struct ddr_cmdtctrl *ioctrl_reg = {
+ (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
+
+/**
+ * As a convention, all functions here return 0 on success
+ * -1 on failure.
+ */
+
+/**
+ * Configure SDRAM
+ */
+int config_sdram(struct sdram_config *cfg)
+{
+ writel(cfg->sdrcr, &emif_reg->sdrcr);
+ writel(cfg->sdrcr2, &emif_reg->sdrcr2);
+ writel(cfg->refresh, &emif_reg->sdrrcr);
+ writel(cfg->refresh_sh, &emif_reg->sdrrcsr);
+
+ return 0;
+}
+
+/**
+ * Set SDRAM timings
+ */
+int set_sdram_timings(struct sdram_timing *t)
+{
+ writel(t->time1, &emif_reg->sdrtim1);
+ writel(t->time1_sh, &emif_reg->sdrtim1sr);
+ writel(t->time2, &emif_reg->sdrtim2);
+ writel(t->time2_sh, &emif_reg->sdrtim2sr);
+ writel(t->time3, &emif_reg->sdrtim3);
+ writel(t->time3_sh, &emif_reg->sdrtim3sr);
+
+ return 0;
+}
+
+/**
+ * Configure DDR PHY
+ */
+int config_ddr_phy(struct ddr_phy_control *p)
+{
+ writel(p->reg, &emif_reg->ddrphycr);
+ writel(p->reg_sh, &emif_reg->ddrphycsr);
+
+ return 0;
+}
+
+/**
+ * Configure DDR CMD control registers
+ */
+int config_cmd_ctrl(struct cmd_control *cmd)
+{
+ writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio);
+ writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce);
+ writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay);
+ writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff);
+ writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout);
+
+ writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio);
+ writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce);
+ writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay);
+ writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff);
+ writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout);
+
+ writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio);
+ writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce);
+ writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay);
+ writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff);
+ writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout);
+
+ return 0;
+}
+
+/**
+ * Configure DDR DATA registers
+ */
+int config_ddr_data(int macrono, struct ddr_data *data)
+{
+ writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0);
+ writel(data->datardsratio1, &ddr_reg[macrono]->dt0rdsratio1);
+
+ writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0);
+ writel(data->datawdsratio1, &ddr_reg[macrono]->dt0wdsratio1);
+
+ writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0);
+ writel(data->datawiratio1, &ddr_reg[macrono]->dt0wiratio1);
+ writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0);
+ writel(data->datagiratio1, &ddr_reg[macrono]->dt0giratio1);
+
+ writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0);
+ writel(data->datafwsratio1, &ddr_reg[macrono]->dt0fwsratio1);
+
+ writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0);
+ writel(data->datawrsratio1, &ddr_reg[macrono]->dt0wrsratio1);
+
+ writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0);
+
+ return 0;
+}
+
+int config_io_ctrl(struct ddr_ioctrl *ioctrl)
+{
+ writel(ioctrl->cmd1ctl, &ioctrl_reg->cm0ioctl);
+ writel(ioctrl->cmd2ctl, &ioctrl_reg->cm1ioctl);
+ writel(ioctrl->cmd3ctl, &ioctrl_reg->cm2ioctl);
+ writel(ioctrl->data1ctl, &ioctrl_reg->dt0ioctl);
+ writel(ioctrl->data2ctl, &ioctrl_reg->dt1ioctl);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
new file mode 100644
index 0000000..1318365
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -0,0 +1,201 @@
+/*
+ * emif4.c
+ *
+ * AM33XX emif4 configuration file
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR;
+struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
+struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+
+
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_MAX_RAM_BANK_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+
+#ifdef CONFIG_AM335X_CONFIG_DDR
+static void data_macro_config(int dataMacroNum)
+{
+ struct ddr_data data;
+
+ data.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
+ |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0));
+ data.datardsratio1 = DDR2_RD_DQS>>2;
+ data.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
+ |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0));
+ data.datawdsratio1 = DDR2_WR_DQS>>2;
+ data.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
+ |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0));
+ data.datawiratio1 = DDR2_PHY_WRLVL>>2;
+ data.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
+ |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0));
+ data.datagiratio1 = DDR2_PHY_GATELVL>>2;
+ data.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
+ |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0));
+ data.datafwsratio1 = DDR2_PHY_FIFO_WE>>2;
+ data.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
+ |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0));
+ data.datawrsratio1 = DDR2_PHY_WR_DATA>>2;
+ data.datadldiff0 = PHY_DLL_LOCK_DIFF;
+
+ config_ddr_data(dataMacroNum, &data);
+}
+
+static void cmd_macro_config(void)
+{
+ struct cmd_control cmd;
+
+ cmd.cmd0csratio = DDR2_RATIO;
+ cmd.cmd0csforce = CMD_FORCE;
+ cmd.cmd0csdelay = CMD_DELAY;
+ cmd.cmd0dldiff = DDR2_DLL_LOCK_DIFF;
+ cmd.cmd0iclkout = DDR2_INVERT_CLKOUT;
+
+ cmd.cmd1csratio = DDR2_RATIO;
+ cmd.cmd1csforce = CMD_FORCE;
+ cmd.cmd1csdelay = CMD_DELAY;
+ cmd.cmd1dldiff = DDR2_DLL_LOCK_DIFF;
+ cmd.cmd1iclkout = DDR2_INVERT_CLKOUT;
+
+ cmd.cmd2csratio = DDR2_RATIO;
+ cmd.cmd2csforce = CMD_FORCE;
+ cmd.cmd2csdelay = CMD_DELAY;
+ cmd.cmd2dldiff = DDR2_DLL_LOCK_DIFF;
+ cmd.cmd2iclkout = DDR2_INVERT_CLKOUT;
+
+ config_cmd_ctrl(&cmd);
+
+}
+
+static void config_vtp(void)
+{
+ writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
+ &vtpreg->vtp0ctrlreg);
+ writel(readl(&vtpreg->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
+ &vtpreg->vtp0ctrlreg);
+ writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_START_EN,
+ &vtpreg->vtp0ctrlreg);
+
+ /* Poll for READY */
+ while ((readl(&vtpreg->vtp0ctrlreg) & VTP_CTRL_READY) !=
+ VTP_CTRL_READY)
+ ;
+}
+
+static void config_emif_ddr2(void)
+{
+ int i;
+ int ret;
+ struct sdram_config cfg;
+ struct sdram_timing tmg;
+ struct ddr_phy_control phyc;
+
+ /*Program EMIF0 CFG Registers*/
+ phyc.reg = EMIF_READ_LATENCY;
+ phyc.reg_sh = EMIF_READ_LATENCY;
+ phyc.reg2 = EMIF_READ_LATENCY;
+
+ tmg.time1 = EMIF_TIM1;
+ tmg.time1_sh = EMIF_TIM1;
+ tmg.time2 = EMIF_TIM2;
+ tmg.time2_sh = EMIF_TIM2;
+ tmg.time3 = EMIF_TIM3;
+ tmg.time3_sh = EMIF_TIM3;
+
+ cfg.sdrcr = EMIF_SDCFG;
+ cfg.sdrcr2 = EMIF_SDCFG;
+ cfg.refresh = 0x00004650;
+ cfg.refresh_sh = 0x00004650;
+
+ /* Program EMIF instance */
+ ret = config_ddr_phy(&phyc);
+ if (ret < 0)
+ printf("Couldn't configure phyc\n");
+
+ ret = config_sdram(&cfg);
+ if (ret < 0)
+ printf("Couldn't configure SDRAM\n");
+
+ ret = set_sdram_timings(&tmg);
+ if (ret < 0)
+ printf("Couldn't configure timings\n");
+
+ /* Delay */
+ for (i = 0; i < 5000; i++)
+ ;
+
+ cfg.refresh = EMIF_SDREF;
+ cfg.refresh_sh = EMIF_SDREF;
+ cfg.sdrcr = EMIF_SDCFG;
+ cfg.sdrcr2 = EMIF_SDCFG;
+
+ ret = config_sdram(&cfg);
+ if (ret < 0)
+ printf("Couldn't configure SDRAM\n");
+}
+
+void config_ddr(void)
+{
+ int data_macro_0 = 0;
+ int data_macro_1 = 1;
+ struct ddr_ioctrl ioctrl;
+
+ enable_emif_clocks();
+
+ config_vtp();
+
+ cmd_macro_config();
+
+ data_macro_config(data_macro_0);
+ data_macro_config(data_macro_1);
+
+ writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
+ writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
+
+ ioctrl.cmd1ctl = DDR_IOCTRL_VALUE;
+ ioctrl.cmd2ctl = DDR_IOCTRL_VALUE;
+ ioctrl.cmd3ctl = DDR_IOCTRL_VALUE;
+ ioctrl.data1ctl = DDR_IOCTRL_VALUE;
+ ioctrl.data2ctl = DDR_IOCTRL_VALUE;
+
+ config_io_ctrl(&ioctrl);
+
+ writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl);
+ writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl);
+
+ config_emif_ddr2();
+}
+#endif
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
new file mode 100644
index 0000000..9638b4c
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -0,0 +1,264 @@
+/*
+ * ddr_defs.h
+ *
+ * ddr specific header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DDR_DEFS_H
+#define _DDR_DEFS_H
+
+#include <asm/arch/hardware.h>
+
+/* AM335X EMIF Register values */
+#define EMIF_SDMGT 0x80000000
+#define EMIF_SDRAM 0x00004650
+#define EMIF_PHYCFG 0x2
+#define DDR_PHY_RESET (0x1 << 10)
+#define DDR_FUNCTIONAL_MODE_EN 0x1
+#define DDR_PHY_READY (0x1 << 2)
+#define VTP_CTRL_READY (0x1 << 5)
+#define VTP_CTRL_ENABLE (0x1 << 6)
+#define VTP_CTRL_LOCK_EN (0x1 << 4)
+#define VTP_CTRL_START_EN (0x1)
+#define DDR2_RATIO 0x80
+#define CMD_FORCE 0x00
+#define CMD_DELAY 0x00
+
+#define EMIF_READ_LATENCY 0x04
+#define EMIF_TIM1 0x0666B3D6
+#define EMIF_TIM2 0x143731DA
+#define EMIF_TIM3 0x00000347
+#define EMIF_SDCFG 0x43805332
+#define EMIF_SDREF 0x0000081a
+#define DDR2_DLL_LOCK_DIFF 0x0
+#define DDR2_RD_DQS 0x12
+#define DDR2_PHY_FIFO_WE 0x80
+
+#define DDR2_INVERT_CLKOUT 0x00
+#define DDR2_WR_DQS 0x00
+#define DDR2_PHY_WRLVL 0x00
+#define DDR2_PHY_GATELVL 0x00
+#define DDR2_PHY_WR_DATA 0x40
+#define PHY_RANK0_DELAY 0x01
+#define PHY_DLL_LOCK_DIFF 0x0
+#define DDR_IOCTRL_VALUE 0x18B
+
+/**
+ * This structure represents the EMIF registers on AM33XX devices.
+ */
+struct emif_regs {
+ unsigned int sdrrev; /* offset 0x00 */
+ unsigned int sdrstat; /* offset 0x04 */
+ unsigned int sdrcr; /* offset 0x08 */
+ unsigned int sdrcr2; /* offset 0x0C */
+ unsigned int sdrrcr; /* offset 0x10 */
+ unsigned int sdrrcsr; /* offset 0x14 */
+ unsigned int sdrtim1; /* offset 0x18 */
+ unsigned int sdrtim1sr; /* offset 0x1C */
+ unsigned int sdrtim2; /* offset 0x20 */
+ unsigned int sdrtim2sr; /* offset 0x24 */
+ unsigned int sdrtim3; /* offset 0x28 */
+ unsigned int sdrtim3sr; /* offset 0x2C */
+ unsigned int res1[2];
+ unsigned int sdrmcr; /* offset 0x38 */
+ unsigned int sdrmcsr; /* offset 0x3C */
+ unsigned int res2[8];
+ unsigned int sdritr; /* offset 0x60 */
+ unsigned int res3[20];
+ unsigned int ddrphycr; /* offset 0xE4 */
+ unsigned int ddrphycsr; /* offset 0xE8 */
+ unsigned int ddrphycr2; /* offset 0xEC */
+};
+
+/**
+ * Encapsulates DDR PHY control and corresponding shadow registers.
+ */
+struct ddr_phy_control {
+ unsigned long reg;
+ unsigned long reg_sh;
+ unsigned long reg2;
+};
+
+/**
+ * Encapsulates SDRAM timing and corresponding shadow registers.
+ */
+struct sdram_timing {
+ unsigned long time1;
+ unsigned long time1_sh;
+ unsigned long time2;
+ unsigned long time2_sh;
+ unsigned long time3;
+ unsigned long time3_sh;
+};
+
+/**
+ * Encapsulates SDRAM configuration.
+ * (Includes refresh control registers) */
+struct sdram_config {
+ unsigned long sdrcr;
+ unsigned long sdrcr2;
+ unsigned long refresh;
+ unsigned long refresh_sh;
+};
+
+/**
+ * Configure SDRAM
+ */
+int config_sdram(struct sdram_config *cfg);
+
+/**
+ * Set SDRAM timings
+ */
+int set_sdram_timings(struct sdram_timing *val);
+
+/**
+ * Configure DDR PHY
+ */
+int config_ddr_phy(struct ddr_phy_control *cfg);
+
+/**
+ * This structure represents the DDR registers on AM33XX devices.
+ */
+struct ddr_regs {
+ unsigned int resv0[7];
+ unsigned int cm0csratio; /* offset 0x01C */
+ unsigned int cm0csforce; /* offset 0x020 */
+ unsigned int cm0csdelay; /* offset 0x024 */
+ unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int cm0iclkout; /* offset 0x02C */
+ unsigned int resv1[8];
+ unsigned int cm1csratio; /* offset 0x050 */
+ unsigned int cm1csforce; /* offset 0x054 */
+ unsigned int cm1csdelay; /* offset 0x058 */
+ unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int cm1iclkout; /* offset 0x060 */
+ unsigned int resv2[8];
+ unsigned int cm2csratio; /* offset 0x084 */
+ unsigned int cm2csforce; /* offset 0x088 */
+ unsigned int cm2csdelay; /* offset 0x08C */
+ unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int cm2iclkout; /* offset 0x094 */
+ unsigned int resv3[12];
+ unsigned int dt0rdsratio0; /* offset 0x0C8 */
+ unsigned int dt0rdsratio1; /* offset 0x0CC */
+ unsigned int resv4[3];
+ unsigned int dt0wdsratio0; /* offset 0x0DC */
+ unsigned int dt0wdsratio1; /* offset 0x0E0 */
+ unsigned int resv5[3];
+ unsigned int dt0wiratio0; /* offset 0x0F0 */
+ unsigned int dt0wiratio1; /* offset 0x0F4 */
+ unsigned int dt0giratio0; /* offset 0x0FC */
+ unsigned int dt0giratio1; /* offset 0x100 */
+ unsigned int resv6[2];
+ unsigned int dt0fwsratio0; /* offset 0x108 */
+ unsigned int dt0fwsratio1; /* offset 0x10C */
+ unsigned int resv7[5];
+ unsigned int dt0wrsratio0; /* offset 0x120 */
+ unsigned int dt0wrsratio1; /* offset 0x124 */
+ unsigned int resv8[3];
+ unsigned int dt0rdelays0; /* offset 0x134 */
+ unsigned int dt0dldiff0; /* offset 0x138 */
+ unsigned int resv9[39];
+ unsigned int dt1rdelays0; /* offset 0x1D8 */
+};
+
+/**
+ * Encapsulates DDR CMD control registers.
+ */
+struct cmd_control {
+ unsigned long cmd0csratio;
+ unsigned long cmd0csforce;
+ unsigned long cmd0csdelay;
+ unsigned long cmd0dldiff;
+ unsigned long cmd0iclkout;
+ unsigned long cmd1csratio;
+ unsigned long cmd1csforce;
+ unsigned long cmd1csdelay;
+ unsigned long cmd1dldiff;
+ unsigned long cmd1iclkout;
+ unsigned long cmd2csratio;
+ unsigned long cmd2csforce;
+ unsigned long cmd2csdelay;
+ unsigned long cmd2dldiff;
+ unsigned long cmd2iclkout;
+};
+
+/**
+ * Encapsulates DDR DATA registers.
+ */
+struct ddr_data {
+ unsigned long datardsratio0;
+ unsigned long datardsratio1;
+ unsigned long datawdsratio0;
+ unsigned long datawdsratio1;
+ unsigned long datawiratio0;
+ unsigned long datawiratio1;
+ unsigned long datagiratio0;
+ unsigned long datagiratio1;
+ unsigned long datafwsratio0;
+ unsigned long datafwsratio1;
+ unsigned long datawrsratio0;
+ unsigned long datawrsratio1;
+ unsigned long datadldiff0;
+};
+
+/**
+ * Configure DDR CMD control registers
+ */
+int config_cmd_ctrl(struct cmd_control *cmd);
+
+/**
+ * Configure DDR DATA registers
+ */
+int config_ddr_data(int data_macrono, struct ddr_data *data);
+
+/**
+ * This structure represents the DDR io control on AM33XX devices.
+ */
+struct ddr_cmdtctrl {
+ unsigned int resv1[1];
+ unsigned int cm0ioctl;
+ unsigned int cm1ioctl;
+ unsigned int cm2ioctl;
+ unsigned int resv2[12];
+ unsigned int dt0ioctl;
+ unsigned int dt1ioctl;
+};
+
+/**
+ * Encapsulates DDR CMD & DATA io control registers.
+ */
+struct ddr_ioctrl {
+ unsigned long cmd1ctl;
+ unsigned long cmd2ctl;
+ unsigned long cmd3ctl;
+ unsigned long data1ctl;
+ unsigned long data2ctl;
+};
+
+/**
+ * Configure DDR io control registers
+ */
+int config_io_ctrl(struct ddr_ioctrl *ioctrl);
+
+struct ddr_ctrl {
+ unsigned int ddrioctrl;
+ unsigned int resv1[325];
+ unsigned int ddrckectrl;
+};
+
+void config_ddr(void);
+
+#endif /* _DDR_DEFS_H */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
new file mode 100644
index 0000000..1e265c6
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -0,0 +1,39 @@
+/*
+ * sys_proto.h
+ *
+ * System information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#define BOARD_REV_ID 0x0
+struct {
+ u32 board_type_v1;
+ u32 board_type_v2;
+ u32 mtype;
+ char *board_string;
+ char *nand_string;
+} board_sysinfo;
+
+u32 get_cpu_rev(void);
+u32 get_sysboot_value(void);
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void);
+#endif
+
+u32 get_device_type(void);
+#endif