board: toradex: add Toradex SMARC iMX8MP
Add support for the Toradex SMARC iMX8MP.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index 89fbdcb..7d510a8 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -9,6 +9,7 @@
apalis-imx8
colibri_imx7
colibri-imx8x
+ smarc-imx8mp
verdin-am62
verdin-imx8mm
verdin-imx8mp
diff --git a/doc/board/toradex/smarc-imx8mp.rst b/doc/board/toradex/smarc-imx8mp.rst
new file mode 100644
index 0000000..6083ce6
--- /dev/null
+++ b/doc/board/toradex/smarc-imx8mp.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Toradex SMARC iMX8M Plus Module
+===============================
+
+- SoM: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
+- Carrier board: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get the DDR firmware
+- Build U-Boot
+- Flash to eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware (Trusted Firmware A)
+-----------------------------------------------------------
+
+.. code-block:: bash
+
+ $ echo "Downloading and building TF-A..."
+ $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ $ cd trusted-firmware-a
+
+Then build ATF (TF-A):
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-linux-gnu-
+ $ make PLAT=imx8mp IMX_BOOT_UART_BASE=0x30a60000 bl31
+ $ cp build/imx8mp/release/bl31.bin ../
+
+Get the DDR Firmware
+--------------------
+
+.. code-block:: bash
+
+ $ cd ..
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
+ $ chmod +x firmware-imx-8.10.1.bin
+ $ ./firmware-imx-8.10.1.bin
+ $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*_202006.bin ./
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-linux-gnu-
+ $ make toradex-smarc-imx8mp_defconfig
+ $ make
+
+Flash to eMMC
+-------------
+
+.. code-block:: bash
+
+ > tftpboot ${loadaddr} flash.bin
+ > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ > mmc dev 0 1 && mmc write ${loadaddr} 0x0 ${blkcnt}
+
+As a convenience, instead of the last two commands, one may also use the update
+U-Boot wrapper:
+
+.. code-block:: bash
+
+ > run update_uboot
+
+Boot
+----
+
+ATF, U-Boot proper and u-boot.dtb images are packed into a FIT image,
+which is loaded and parsed by SPL.
+
+Boot sequence is:
+
+* SPL ---> ATF (TF-A) ---> U-Boot proper
+
+Output::
+
+ U-Boot SPL 2025.04-rc5-00023-g34c31be81211 (Apr 04 2025 - 15:36:23 +0100)
+ Training FAILED
+ DDR configured as single rank
+ SEC0: RNG instantiated
+ Normal Boot
+ Trying to boot from BOOTROM
+ Boot Stage: Primary boot
+ Find img info 0x4802f200, size 1100
+ Need continue download 1024
+ NOTICE: Do not release JR0 to NS as it can be used by HAB
+ NOTICE: BL31: v2.11.0(release):v2.11.0-723-gbd298f5c30ac
+ NOTICE: BL31: Built : 14:18:43, Apr 4 2025
+
+
+ U-Boot 2025.04-rc5-00023-g34c31be81211 (Apr 04 2025 - 15:36:23 +0100)
+
+ CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
+ CPU: Industrial temperature grade (-40C to 105C) at 72C
+ Reset cause: POR
+ DRAM: 4 GiB
+ Core: 312 devices, 32 uclasses, devicetree: separate
+ WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
+ MMC: FSL_SDHC: 1, FSL_SDHC: 0
+ Loading Environment from MMC... Reading from MMC(0)... OK
+ In: serial@30a60000
+ Out: serial@30a60000
+ Err: serial@30a60000
+ Model: Toradex 0097 SMARC iMX8M Plus Quad 4GB WB IT V1.0A
+ Serial#: 15603364
+ SEC0: RNG instantiated
+ Net: Get shared mii bus on ethernet@30be0000
+ eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
+ Hit any key to stop autoboot: 0
+ SMARC iMX8MP #