pci: mvebu: Add PCIe driver
This adds a PCI driver for the controllers found on Marvell MVEBU SoCs.
Besides the driver, this patch also removes the statically defined
PCI MBUS windows. As they are not needed anymore, since this PCIe
driver now creates the windows dynamically.
Tested on Armada XP db-mv784mp-gp eval board using an Intel E1000
PCIe card in all 3 PCIe slots. And on the Armada 38x db-88f6820-gp
eval board using this Intel E1000 PCIe card in the PCIe 0 slot.
This port was done in cooperation with Anton Schubert.
Signed-off-by: Anton Schubert <anton.schubert@gmx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 1c5f4c3..ea83e21 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -18,14 +18,6 @@
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
static struct mbus_win windows[] = {
- /* PCIE MEM address space */
- { MBUS_PCI_MEM_BASE, MBUS_PCI_MEM_SIZE,
- CPU_TARGET_PCIE13, CPU_ATTR_PCIE_MEM },
-
- /* PCIE IO address space */
- { MBUS_PCI_IO_BASE, MBUS_PCI_IO_SIZE,
- CPU_TARGET_PCIE13, CPU_ATTR_PCIE_IO },
-
/* SPI */
{ MBUS_SPI_BASE, MBUS_SPI_SIZE,
CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_SPIFLASH },
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index adc238f..bcf8127 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
obj-$(CONFIG_PCIE_IMX) += pcie_imx.o
obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
+obj-$(CONFIG_PCI_MVEBU) += pci_mvebu.o
obj-$(CONFIG_SH4_PCI) += pci_sh4.o
obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
new file mode 100644
index 0000000..fd2744d
--- /dev/null
+++ b/drivers/pci/pci_mvebu.c
@@ -0,0 +1,423 @@
+/*
+ * PCIe driver for Marvell MVEBU SoCs
+ *
+ * Based on Barebox drivers/pci/pci-mvebu.c
+ *
+ * Ported to U-Boot by:
+ * Anton Schubert <anton.schubert@gmx.de>
+ * Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/mbus.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* PCIe unit register offsets */
+#define SELECT(x, n) ((x >> n) & 1UL)
+
+#define PCIE_DEV_ID_OFF 0x0000
+#define PCIE_CMD_OFF 0x0004
+#define PCIE_DEV_REV_OFF 0x0008
+#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
+#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
+#define PCIE_CAPAB_OFF 0x0060
+#define PCIE_CTRL_STAT_OFF 0x0068
+#define PCIE_HEADER_LOG_4_OFF 0x0128
+#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
+#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
+#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
+#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
+#define PCIE_WIN5_CTRL_OFF 0x1880
+#define PCIE_WIN5_BASE_OFF 0x1884
+#define PCIE_WIN5_REMAP_OFF 0x188c
+#define PCIE_CONF_ADDR_OFF 0x18f8
+#define PCIE_CONF_ADDR_EN BIT(31)
+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
+#define PCIE_CONF_ADDR(dev, reg) \
+ (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \
+ PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
+ PCIE_CONF_ADDR_EN)
+#define PCIE_CONF_DATA_OFF 0x18fc
+#define PCIE_MASK_OFF 0x1910
+#define PCIE_MASK_ENABLE_INTS (0xf << 24)
+#define PCIE_CTRL_OFF 0x1a00
+#define PCIE_CTRL_X1_MODE BIT(0)
+#define PCIE_STAT_OFF 0x1a04
+#define PCIE_STAT_BUS (0xff << 8)
+#define PCIE_STAT_DEV (0x1f << 16)
+#define PCIE_STAT_LINK_DOWN BIT(0)
+#define PCIE_DEBUG_CTRL 0x1a60
+#define PCIE_DEBUG_SOFT_RESET BIT(20)
+
+struct resource {
+ u32 start;
+ u32 end;
+};
+
+struct mvebu_pcie {
+ struct pci_controller hose;
+ char *name;
+ void __iomem *base;
+ void __iomem *membase;
+ struct resource mem;
+ void __iomem *iobase;
+ u32 port;
+ u32 lane;
+ u32 lane_mask;
+ pci_dev_t dev;
+};
+
+#define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci)
+
+/*
+ * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
+ * into SoCs address space. Each controller will map 32M of MEM
+ * and 64K of I/O space when registered.
+ */
+static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
+#define PCIE_MEM_SIZE (32 << 20)
+
+#if defined(CONFIG_ARMADA_38X)
+#define PCIE_BASE(if) \
+ ((if) == 0 ? \
+ MVEBU_REG_PCIE_BASE + 0x40000 : \
+ MVEBU_REG_PCIE_BASE + 0x4000 * (if))
+
+/*
+ * On A38x MV6820 these PEX ports are supported:
+ * 0 - Port 0.0
+ * 1 - Port 0.1
+ * 2 - Port 0.2
+ */
+#define MAX_PEX 3
+static struct mvebu_pcie pcie_bus[MAX_PEX];
+
+static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
+ int *mem_target, int *mem_attr)
+{
+ u8 port[] = { 0, 1, 2 };
+ u8 lane[] = { 0, 0, 0 };
+ u8 target[] = { 8, 4, 4 };
+ u8 attr[] = { 0xe8, 0xe8, 0xd8 };
+
+ pcie->port = port[pex_idx];
+ pcie->lane = lane[pex_idx];
+ *mem_target = target[pex_idx];
+ *mem_attr = attr[pex_idx];
+}
+#else
+#define PCIE_BASE(if) \
+ ((if) < 8 ? \
+ (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \
+ (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000))
+
+/*
+ * On AXP MV78460 these PEX ports are supported:
+ * 0 - Port 0.0
+ * 1 - Port 0.1
+ * 2 - Port 0.2
+ * 3 - Port 0.3
+ * 4 - Port 1.0
+ * 5 - Port 1.1
+ * 6 - Port 1.2
+ * 7 - Port 1.3
+ * 8 - Port 2.0
+ * 9 - Port 3.0
+ */
+#define MAX_PEX 10
+static struct mvebu_pcie pcie_bus[MAX_PEX];
+
+static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
+ int *mem_target, int *mem_attr)
+{
+ u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 };
+ u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 };
+ u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 };
+ u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78,
+ 0xe8, 0xd8, 0xb8, 0x78,
+ 0xf8, 0xf8 };
+
+ pcie->port = port[pex_idx];
+ pcie->lane = lane[pex_idx];
+ *mem_target = target[pex_idx];
+ *mem_attr = attr[pex_idx];
+}
+#endif
+
+static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
+{
+ u32 val;
+ val = readl(pcie->base + PCIE_STAT_OFF);
+ return !(val & PCIE_STAT_LINK_DOWN);
+}
+
+static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
+{
+ u32 stat;
+
+ stat = readl(pcie->base + PCIE_STAT_OFF);
+ stat &= ~PCIE_STAT_BUS;
+ stat |= busno << 8;
+ writel(stat, pcie->base + PCIE_STAT_OFF);
+}
+
+static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
+{
+ u32 stat;
+
+ stat = readl(pcie->base + PCIE_STAT_OFF);
+ stat &= ~PCIE_STAT_DEV;
+ stat |= devno << 16;
+ writel(stat, pcie->base + PCIE_STAT_OFF);
+}
+
+static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
+{
+ u32 stat;
+
+ stat = readl(pcie->base + PCIE_STAT_OFF);
+ return (stat & PCIE_STAT_BUS) >> 8;
+}
+
+static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
+{
+ u32 stat;
+
+ stat = readl(pcie->base + PCIE_STAT_OFF);
+ return (stat & PCIE_STAT_DEV) >> 16;
+}
+
+static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
+{
+ return container_of(hose, struct mvebu_pcie, hose);
+}
+
+static int mvebu_pcie_read_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 *val)
+{
+ struct mvebu_pcie *pcie = hose_to_pcie(hose);
+ int local_bus = PCI_BUS(pcie->dev);
+ int local_dev = PCI_DEV(pcie->dev);
+ u32 reg;
+
+ /* Only allow one other device besides the local one on the local bus */
+ if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
+ if (local_dev == 0 && PCI_DEV(dev) != 1) {
+ /*
+ * If local dev is 0, the first other dev can
+ * only be 1
+ */
+ *val = 0xffffffff;
+ return 1;
+ } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
+ /*
+ * If local dev is not 0, the first other dev can
+ * only be 0
+ */
+ *val = 0xffffffff;
+ return 1;
+ }
+ }
+
+ /* write address */
+ reg = PCIE_CONF_ADDR(dev, offset);
+ writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
+ *val = readl(pcie->base + PCIE_CONF_DATA_OFF);
+
+ return 0;
+}
+
+static int mvebu_pcie_write_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 val)
+{
+ struct mvebu_pcie *pcie = hose_to_pcie(hose);
+ int local_bus = PCI_BUS(pcie->dev);
+ int local_dev = PCI_DEV(pcie->dev);
+
+ /* Only allow one other device besides the local one on the local bus */
+ if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
+ if (local_dev == 0 && PCI_DEV(dev) != 1) {
+ /*
+ * If local dev is 0, the first other dev can
+ * only be 1
+ */
+ return 1;
+ } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
+ /*
+ * If local dev is not 0, the first other dev can
+ * only be 0
+ */
+ return 1;
+ }
+ }
+
+ writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF);
+ writel(val, pcie->base + PCIE_CONF_DATA_OFF);
+
+ return 0;
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
+{
+ const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
+ u32 size;
+ int i;
+
+ /* First, disable and clear BARs and windows. */
+ for (i = 1; i < 3; i++) {
+ writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
+ writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
+ writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
+ }
+
+ for (i = 0; i < 5; i++) {
+ writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
+ writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
+ writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
+ }
+
+ writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
+ writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
+ writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
+
+ /* Setup windows for DDR banks. Count total DDR size on the fly. */
+ size = 0;
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(cs->base & 0xffff0000,
+ pcie->base + PCIE_WIN04_BASE_OFF(i));
+ writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ pcie->base + PCIE_WIN04_CTRL_OFF(i));
+
+ size += cs->size;
+ }
+
+ /* Round up 'size' to the nearest power of two. */
+ if ((size & (size - 1)) != 0)
+ size = 1 << fls(size);
+
+ /* Setup BAR[1] to all DRAM banks. */
+ writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
+ writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
+ writel(((size - 1) & 0xffff0000) | 0x1,
+ pcie->base + PCIE_BAR_CTRL_OFF(1));
+}
+
+void pci_init_board(void)
+{
+ int mem_target, mem_attr, i;
+ int bus = 0;
+ u32 reg;
+ u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4);
+
+ /* Check SoC Control Power State */
+ debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n",
+ __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1),
+ SELECT(soc_ctrl, 2));
+
+ for (i = 0; i < MAX_PEX; i++) {
+ struct mvebu_pcie *pcie = &pcie_bus[i];
+ struct pci_controller *hose = &pcie->hose;
+
+ /* Get port number, lane number and memory target / attr */
+ mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
+
+ /* Don't read at all from pci registers if port power is down */
+ if (pcie->lane == 0 && SELECT(soc_ctrl, pcie->port) == 0) {
+ i += 3;
+ debug("%s: skipping port %d\n", __func__, pcie->port);
+ continue;
+ }
+
+ pcie->base = (void __iomem *)PCIE_BASE(i);
+
+ /* Check link and skip ports that have no link */
+ if (!mvebu_pcie_link_up(pcie)) {
+ debug("%s: PCIe %d.%d - down\n", __func__,
+ pcie->port, pcie->lane);
+ continue;
+ }
+ debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
+ pcie->port, pcie->lane, (u32)pcie->base);
+
+ /* Read Id info and local bus/dev */
+ debug("direct conf read %08x, local bus %d, local dev %d\n",
+ readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
+ mvebu_pcie_get_local_dev_nr(pcie));
+
+ mvebu_pcie_set_local_bus_nr(pcie, bus);
+ mvebu_pcie_set_local_dev_nr(pcie, 0);
+ pcie->dev = PCI_BDF(bus, 0, 0);
+
+ pcie->mem.start = (u32)mvebu_pcie_membase;
+ pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
+ mvebu_pcie_membase += PCIE_MEM_SIZE;
+
+ if (mvebu_mbus_add_window_by_id(mem_target, mem_attr,
+ (phys_addr_t)pcie->mem.start,
+ PCIE_MEM_SIZE)) {
+ printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
+ (u32)pcie->mem.start, PCIE_MEM_SIZE);
+ }
+
+ /* Setup windows and configure host bridge */
+ mvebu_pcie_setup_wins(pcie);
+
+ /* Master + slave enable. */
+ reg = readl(pcie->base + PCIE_CMD_OFF);
+ reg |= PCI_COMMAND_MEMORY;
+ reg |= PCI_COMMAND_MASTER;
+ reg |= BIT(10); /* disable interrupts */
+ writel(reg, pcie->base + PCIE_CMD_OFF);
+
+ /* Setup U-Boot PCI Controller */
+ hose->first_busno = 0;
+ hose->current_busno = bus;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0, pcie->mem.start,
+ pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
+ pci_set_region(hose->regions + 1,
+ 0, 0,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+ hose->region_count = 2;
+
+ pci_set_ops(hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ mvebu_pcie_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ mvebu_pcie_write_config_dword);
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+
+ /* Set BAR0 to internal registers */
+ writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
+ writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
+
+ bus = hose->last_busno + 1;
+ }
+}