mtd: spi-nor-core: Track flash's internal address mode
The nor->addr_width tracks number of address bytes used in
read/program/erase ops and eventually set to 4 for >16MB chips, regardless
of flash's internal address mode. For Infineon SEMPER flash's, we use
Read/Write Any Register commands for configuration and status check.
These commands take 3- or 4-byte address depending on flash's internal
address mode.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 638d807..30f1545 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -494,6 +494,10 @@
* @rdsr_dummy dummy cycles needed for Read Status Register command.
* @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register
* command.
+ * @addr_mode_nbytes: number of address bytes of current address mode. Useful
+ * when the flash operates with 4B opcodes but needs the
+ * internal address mode for opcodes that don't have a 4B
+ * opcode correspondent.
* @bank_read_cmd: Bank read cmd
* @bank_write_cmd: Bank write cmd
* @bank_curr: Current flash bank
@@ -540,6 +544,7 @@
u8 program_opcode;
u8 rdsr_dummy;
u8 rdsr_addr_nbytes;
+ u8 addr_mode_nbytes;
#ifdef CONFIG_SPI_FLASH_BAR
u8 bank_read_cmd;
u8 bank_write_cmd;