diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index a1c01d1..927f397 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -51,14 +51,14 @@
 Management Subsystem (SMS) which will secure the device and start a core
 in the wakeup domain to run the ROM code. ROM will then initialize the
 boot media needed to load the binaries packaged inside `tiboot3.bin`,
-including a 32bit U-Boot SPL, (called the wakup SPL) that ROM will jump
+including a 32bit U-Boot SPL, (called the wakeup SPL) that ROM will jump
 to after it has finished loading everything into internal SRAM.
 
 .. image:: img/boot_flow_01.svg
   :alt: Boot flow up to wakeup domain SPL
 
 The wakeup SPL, running on a wakeup domain core, will initialize DDR and
-any peripherals needed load the larger binaries inside the `tispl.bin`
+any peripherals needed to load the larger binaries inside the `tispl.bin`
 into DDR.  Once loaded the wakeup SPL will start one of the 'big'
 application cores inside the main domain to initialize the main domain,
 starting with Trusted Firmware-A (TF-A), before moving on to start
@@ -94,7 +94,7 @@
 * Combined binary with a split firmware: (eg: AM62)
 
 For devices that utilize the split binary approach, ROM is not capable
-of loading the firmware into the SoC requiring the wakeup domain's
+of loading the firmware into the SoC, requiring the wakeup domain's
 U-Boot SPL to load the firmware.
 
 Devices with a split firmware will have two firmwares loaded into the
@@ -114,8 +114,8 @@
 authenticated boot flow for secure boot. HS-FS (High Security - Field
 Securable) is the state of a K3 device before it has been eFused with
 customer security keys.  In the HS-FS state the authentication still can
-function as in HS-SE but as there are no customer keys to verify the
-signatures against the authentication will pass for certificates signed
+function as in HS-SE, but as there are no customer keys to verify the
+signatures against, the authentication will pass for certificates signed
 with any key.
 
 Chain of trust