Kconfig: Drop CONFIG_CMD_DS4510
This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this driver without its commands.
Drop this option, move the header file out of the common include/
directory and make all the function static.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index c08a0be..9ffdafc 100644
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -12,7 +12,7 @@
#include <common.h>
#include <i2c.h>
#include <command.h>
-#include <ds4510.h>
+#include "ds4510.h"
/* Default to an address that hopefully won't corrupt other i2c devices */
#ifndef CONFIG_SYS_I2C_DS4510_ADDR
@@ -35,7 +35,7 @@
/*
* Write to DS4510, taking page boundaries into account
*/
-int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
+static int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
{
int wrlen;
int i = 0;
@@ -64,7 +64,7 @@
/*
* General read from DS4510
*/
-int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
+static int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
{
return i2c_read(chip, offset, 1, buf, count);
}
@@ -74,7 +74,7 @@
* nv = 0 - Writes to SEEPROM registers behave like EEPROM
* nv = 1 - Writes to SEEPROM registers behave like SRAM
*/
-int ds4510_see_write(uint8_t chip, uint8_t nv)
+static int ds4510_see_write(uint8_t chip, uint8_t nv)
{
uint8_t data;
@@ -92,7 +92,7 @@
/*
* Write de-assertion of reset signal delay
*/
-int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
+static int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
{
uint8_t data;
@@ -108,7 +108,7 @@
/*
* Write pullup characteristics of IO pins
*/
-int ds4510_pullup_write(uint8_t chip, uint8_t val)
+static int ds4510_pullup_write(uint8_t chip, uint8_t val)
{
val &= DS4510_IO_MASK;
@@ -118,7 +118,7 @@
/*
* Read pullup characteristics of IO pins
*/
-int ds4510_pullup_read(uint8_t chip)
+static int ds4510_pullup_read(uint8_t chip)
{
uint8_t val;
@@ -131,7 +131,7 @@
/*
* Write drive level of IO pins
*/
-int ds4510_gpio_write(uint8_t chip, uint8_t val)
+static int ds4510_gpio_write(uint8_t chip, uint8_t val)
{
uint8_t data;
int i;
@@ -155,7 +155,7 @@
/*
* Read drive level of IO pins
*/
-int ds4510_gpio_read(uint8_t chip)
+static int ds4510_gpio_read(uint8_t chip)
{
uint8_t data;
int val = 0;
@@ -175,7 +175,7 @@
/*
* Read physical level of IO pins
*/
-int ds4510_gpio_read_val(uint8_t chip)
+static int ds4510_gpio_read_val(uint8_t chip)
{
uint8_t val;
@@ -185,7 +185,6 @@
return val & DS4510_IO_MASK;
}
-#ifdef CONFIG_CMD_DS4510
/*
* Display DS4510 information
*/
@@ -384,4 +383,3 @@
"ds4510 sram write addr off cnt\n"
" - read/write 'cnt' bytes at SRAM offset 'off'"
);
-#endif /* CONFIG_CMD_DS4510 */
diff --git a/include/ds4510.h b/drivers/misc/ds4510.h
similarity index 75%
rename from include/ds4510.h
rename to drivers/misc/ds4510.h
index e54db35..a6c6c58 100644
--- a/include/ds4510.h
+++ b/drivers/misc/ds4510.h
@@ -50,14 +50,4 @@
#define DS4510_SRAM 0xfa
#define DS4510_SRAM_SIZE 0x06
-int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count);
-int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count);
-int ds4510_see_write(uint8_t chip, uint8_t nv);
-int ds4510_rstdelay_write(uint8_t chip, uint8_t delay);
-int ds4510_pullup_write(uint8_t chip, uint8_t val);
-int ds4510_pullup_read(uint8_t chip);
-int ds4510_gpio_write(uint8_t chip, uint8_t val);
-int ds4510_gpio_read(uint8_t chip);
-int ds4510_gpio_read_val(uint8_t chip);
-
#endif /* __DS4510_H_ */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index dae61b1..822f70e 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -502,7 +502,6 @@
/*
* Command configuration.
*/
-#define CONFIG_CMD_DS4510
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IRQ
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index ce1ff86..a12a3f8 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -354,7 +354,6 @@
/*
* Command configuration.
*/
-#define CONFIG_CMD_DS4510
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_JFFS2
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index af253f4..f34fd67 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -383,7 +383,6 @@
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_DS4510
CONFIG_CMD_DTT
CONFIG_CMD_ECCTEST
CONFIG_CMD_EECONFIG