diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
new file mode 100644
index 0000000..ec63a5e
--- /dev/null
+++ b/cpu/bf533/bf533_serial.h
@@ -0,0 +1,78 @@
+/*
+ * U-boot - bf533_serial.h Serial Driver defines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on 
+ * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
+ * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
+ *
+ * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
+ * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328serial.c which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _Bf533_SERIAL_H
+#define _Bf533_SERIAL_H
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+
+#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
+#define ACCESS_LATCH	*pUART_LCR |= UART_LCR_DLAB;
+#define ACCESS_PORT_IER	*pUART_LCR &= (~UART_LCR_DLAB);
+
+void serial_setbrg(void);
+static void local_put_char(char ch);
+void calc_baud(void);
+void serial_setbrg(void);
+int serial_init(void);
+void serial_putc(const char c);
+int serial_tstc(void);
+int serial_getc(void);
+void serial_puts(const char *s);
+static void local_put_char(char ch);
+
+extern int get_clock(void);
+int baud_table[5] = {9600, 19200, 38400, 57600, 115200};
+
+struct {
+	unsigned char dl_high;
+	unsigned char dl_low;
+} hw_baud_table[5];
+
+#ifdef CONFIG_STAMP
+extern unsigned long pll_div_fact;
+#endif
+
+#endif