diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h
new file mode 100644
index 0000000..1d0b694
--- /dev/null
+++ b/include/configs/bf537-srv1.h
@@ -0,0 +1,204 @@
+/*
+ * U-boot - Configuration file for CSP Minotaur board
+ *
+ * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
+ *    Minotaur config, brushed up for official uClinux dist.
+ *    Parallel flash support disabled, SPI flash boot command
+ *    added ('run flashboot').
+ *
+ * Flash image map:
+ *
+ * 0x00000000      u-boot bootstrap
+ * 0x00010000      environment
+ * 0x00020000      u-boot code
+ * 0x00030000      uImage.initramfs
+ *
+ */
+
+#ifndef __CONFIG_BF537_SRV1_H__
+#define __CONFIG_BF537_SRV1_H__
+
+#include <asm/blackfin-config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf537-0.2
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
+
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			22118400
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			20
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE			32
+#define CONFIG_MEM_ADD_WDTH		9
+
+#define CONFIG_EBIU_SDRRC_VAL		0x2ac
+#define CONFIG_EBIU_SDGCTL_VAL		0x91110d
+
+#define CONFIG_EBIU_AMGCTL_VAL		0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(384 << 10)
+
+
+/*
+ * Network Settings
+ */
+#ifndef __ADSPBF534__
+#define CONFIG_BFIN_MAC
+#define CONFIG_NETCONSOLE	1
+#define CONFIG_NET_MULTI	1
+#endif
+#ifdef CONFIG_BFIN_MAC
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		bf537-srv1
+#endif
+
+#define CONFIG_SYS_AUTOLOAD	"no"
+#define CONFIG_ROOTPATH		/romfs
+/* Use a fixed MAC address for booting up. Firstboot linux
+ * must fetch a valid MAC from the production server. */
+#define CONFIG_ETHADDR	02:80:ad:20:31:42
+
+
+/*
+ * Flash Settings
+ */
+/* We don't have a parallel flash chip there */
+#define CONFIG_SYS_NO_FLASH
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+#define CONFIG_SF_DEFAULT_HZ	30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0x10000
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define ENV_IS_EMBEDDED_CUSTOM
+
+
+/*
+ * I2C settings
+ */
+#define CONFIG_BFIN_TWI_I2C	1
+#define CONFIG_HARD_I2C		1
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_UART_CONSOLE	0
+
+#define CONFIG_PANIC_HANG	1
+#define CONFIG_RTC_BFIN		1
+#define CONFIG_BOOT_RETRY_TIME	-1
+#define CONFIG_LOADS_ECHO		1
+
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+# define CONFIG_BOOTDELAY	-1
+#else
+# define CONFIG_BOOTDELAY	5
+#endif
+
+#include <config_cmd_default.h>
+
+#ifdef CONFIG_BFIN_MAC
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_PING
+#else
+# undef CONFIG_CMD_NET
+#endif
+
+#define CONFIG_CMD_BOOTLDR
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_SF
+
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define CONFIG_BOOTARGS	"root=/dev/mtdblock0 rw"
+#define CONFIG_SYS_PROMPT	"srv1> "
+
+#define BOOT_ENV_SETTINGS \
+	"update=tftpboot $(loadaddr) u-boot.ldr;" \
+		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf erase 0 0x30000;" \
+		"sf write $(loadaddr) 0 $(filesize)" \
+	"flashboot=sf read 0x1000000 0x30000 0x320000;" \
+		"bootm 0x1000000\0"
+#ifdef CONFIG_BFIN_MAC
+# define NETWORK_ENV_SETTINGS \
+	"nfsargs=setenv bootargs root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath)\0" \
+	"addip=setenv bootargs $(bootargs) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+		":$(hostname):eth0:off\0" \
+	"ramboot=tftpboot $(loadaddr) linux;" \
+		"run ramargs;run addip;bootelf\0" \
+	"nfsboot=tftpboot $(loadaddr) linux;" \
+		"run nfsargs;run addip;bootelf\0"
+#else
+# define NETWORK_ENV_SETTINGS
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	NETWORK_ENV_SETTINGS \
+	"ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
+	BOOT_ENV_SETTINGS
+
+
+#include <asm/blackfin-config-post.h>
+
+#endif