| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2011 |
| * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> |
| */ |
| #include <common.h> |
| #include <config.h> |
| #include <fdt_support.h> |
| #include <image.h> |
| #include <spl.h> |
| #include <asm/io.h> |
| #include <nand.h> |
| #include <linux/libfdt_env.h> |
| #include <fdt.h> |
| |
| uint32_t __weak spl_nand_get_uboot_raw_page(void) |
| { |
| return CONFIG_SYS_NAND_U_BOOT_OFFS; |
| } |
| |
| #if defined(CONFIG_SPL_NAND_RAW_ONLY) |
| static int spl_nand_load_image(struct spl_image_info *spl_image, |
| struct spl_boot_device *bootdev) |
| { |
| nand_init(); |
| |
| printf("Loading U-Boot from 0x%08x (size 0x%08x) to 0x%08x\n", |
| CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, |
| CONFIG_SYS_NAND_U_BOOT_DST); |
| |
| nand_spl_load_image(spl_nand_get_uboot_raw_page(), |
| CONFIG_SYS_NAND_U_BOOT_SIZE, |
| (void *)CONFIG_SYS_NAND_U_BOOT_DST); |
| spl_set_header_raw_uboot(spl_image); |
| nand_deselect(); |
| |
| return 0; |
| } |
| #else |
| |
| static ulong spl_nand_fit_read(struct spl_load_info *load, ulong offs, |
| ulong size, void *dst) |
| { |
| int ret; |
| |
| ret = nand_spl_load_image(offs, size, dst); |
| if (!ret) |
| return size; |
| else |
| return 0; |
| } |
| |
| static int spl_nand_load_element(struct spl_image_info *spl_image, |
| int offset, struct image_header *header) |
| { |
| int err; |
| |
| err = nand_spl_load_image(offset, sizeof(*header), (void *)header); |
| if (err) |
| return err; |
| |
| if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && |
| image_get_magic(header) == FDT_MAGIC) { |
| struct spl_load_info load; |
| |
| debug("Found FIT\n"); |
| load.dev = NULL; |
| load.priv = NULL; |
| load.filename = NULL; |
| load.bl_len = 1; |
| load.read = spl_nand_fit_read; |
| return spl_load_simple_fit(spl_image, &load, offset, header); |
| } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) { |
| struct spl_load_info load; |
| |
| load.dev = NULL; |
| load.priv = NULL; |
| load.filename = NULL; |
| load.bl_len = 1; |
| load.read = spl_nand_fit_read; |
| return spl_load_imx_container(spl_image, &load, offset); |
| } else { |
| err = spl_parse_image_header(spl_image, header); |
| if (err) |
| return err; |
| return nand_spl_load_image(offset, spl_image->size, |
| (void *)(ulong)spl_image->load_addr); |
| } |
| } |
| |
| static int spl_nand_load_image(struct spl_image_info *spl_image, |
| struct spl_boot_device *bootdev) |
| { |
| int err; |
| struct image_header *header; |
| int *src __attribute__((unused)); |
| int *dst __attribute__((unused)); |
| |
| #ifdef CONFIG_SPL_NAND_SOFTECC |
| debug("spl: nand - using sw ecc\n"); |
| #else |
| debug("spl: nand - using hw ecc\n"); |
| #endif |
| nand_init(); |
| |
| header = spl_get_load_buffer(0, sizeof(*header)); |
| |
| #ifdef CONFIG_SPL_OS_BOOT |
| if (!spl_start_uboot()) { |
| /* |
| * load parameter image |
| * load to temp position since nand_spl_load_image reads |
| * a whole block which is typically larger than |
| * CONFIG_CMD_SPL_WRITE_SIZE therefore may overwrite |
| * following sections like BSS |
| */ |
| nand_spl_load_image(CONFIG_CMD_SPL_NAND_OFS, |
| CONFIG_CMD_SPL_WRITE_SIZE, |
| (void *)CONFIG_SYS_TEXT_BASE); |
| /* copy to destintion */ |
| for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR, |
| src = (int *)CONFIG_SYS_TEXT_BASE; |
| src < (int *)(CONFIG_SYS_TEXT_BASE + |
| CONFIG_CMD_SPL_WRITE_SIZE); |
| src++, dst++) { |
| writel(readl(src), dst); |
| } |
| |
| /* load linux */ |
| nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS, |
| sizeof(*header), (void *)header); |
| err = spl_parse_image_header(spl_image, header); |
| if (err) |
| return err; |
| if (header->ih_os == IH_OS_LINUX) { |
| /* happy - was a linux */ |
| err = nand_spl_load_image( |
| CONFIG_SYS_NAND_SPL_KERNEL_OFFS, |
| spl_image->size, |
| (void *)spl_image->load_addr); |
| nand_deselect(); |
| return err; |
| } else { |
| puts("The Expected Linux image was not " |
| "found. Please check your NAND " |
| "configuration.\n"); |
| puts("Trying to start u-boot now...\n"); |
| } |
| } |
| #endif |
| #ifdef CONFIG_NAND_ENV_DST |
| spl_nand_load_element(spl_image, CONFIG_ENV_OFFSET, header); |
| #ifdef CONFIG_ENV_OFFSET_REDUND |
| spl_nand_load_element(spl_image, CONFIG_ENV_OFFSET_REDUND, header); |
| #endif |
| #endif |
| /* Load u-boot */ |
| err = spl_nand_load_element(spl_image, spl_nand_get_uboot_raw_page(), |
| header); |
| #ifdef CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND |
| #if CONFIG_SYS_NAND_U_BOOT_OFFS != CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND |
| if (err) |
| err = spl_nand_load_element(spl_image, |
| CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND, |
| header); |
| #endif |
| #endif |
| nand_deselect(); |
| return err; |
| } |
| #endif |
| /* Use priorty 1 so that Ubi can override this */ |
| SPL_LOAD_IMAGE_METHOD("NAND", 1, BOOT_DEVICE_NAND, spl_nand_load_image); |