rockchip: dts: tinker: move i2c node to shared device tree
The I2C EEPROM is present on Tinker Board S as well. Move the i2c node
to the shared, U-Boot specific rk3288-tinker-u-boot.dtsi device tree.
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
index 732aa4f..56d10c8 100644
--- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
@@ -17,6 +17,13 @@
rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
};
+&i2c2 {
+ m24c08@50 {
+ compatible = "at,24c08", "i2c-eeprom";
+ reg = <0x50>;
+ };
+};
+
&pinctrl {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts
index 4b8405f..3386701 100644
--- a/arch/arm/dts/rk3288-tinker.dts
+++ b/arch/arm/dts/rk3288-tinker.dts
@@ -35,10 +35,3 @@
vbus-supply = <&vcc5v0_host>;
status = "okay";
};
-
-&i2c2 {
- m24c08@50 {
- compatible = "at,24c08", "i2c-eeprom";
- reg = <0x50>;
- };
-};