Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx
diff --git a/CHANGELOG b/CHANGELOG
index 6e26105..02b3664 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,172 @@
+commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:13:16 2007 +0100
+
+ [PATCH] Update AMCC Luan 440SP eval board support
+
+ The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
+ inititializition. This includes DDR auto calibration and support
+ for different DIMM modules, instead of the fixed setup used in
+ the earlier version.
+
+ This patch also enables the cache in FLASH for the startup
+ phase of U-Boot (while running from FLASH). After relocating to
+ SDRAM the cache is disabled again. This will speed up the boot
+ process, especially the SDRAM setup, since there are some loops
+ for memory testing (auto calibration).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2f5df47351910a2936c7741cf111855829200943
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:10:18 2007 +0100
+
+ [PATCH] Update AMCC Yucca 440SPe eval board support
+
+ The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
+ inititializition. This includes DDR auto calibration and support
+ for different DIMM modules, instead of the fixed setup used in
+ the earlier version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2721a68a9ea91f1e494649ce68b2577261f578e2
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:07:18 2007 +0100
+
+ ppc4xx: Small AMCC Katmai 440SPe update
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df294497479b1dca6dd86318b2a912f72fede0df
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:06:09 2007 +0100
+
+ ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fa1aef15bcd47736687be1af544506e90fba545d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 7 16:43:00 2007 +0100
+
+ [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
+
+ Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
+ DDR memory are dynamically programmed matching the total size
+ of the equipped memory (DIMM modules).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e2ebe696818939e2b974628be9c921ea3fe9de13
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 7 16:39:36 2007 +0100
+
+ [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
+
+ This patch fixes a problem that occurs when 2 DIMM's are
+ used. This problem was first spotted and fixed by Gerald Jackson
+ <gerald.jackson@reaonixsecurity.com> but this patch fixes the
+ problem in a little more clever way.
+
+ This patch also adds the nice functionality to dynamically
+ create the TLB entries for the SDRAM (tlb.c). So we should
+ never run into such problems with wrong (too short) TLB
+ initialization again on these platforms.
+
+ As this feature is new to the "old" 44x SPD DDR driver, it
+ has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 39218433983417b9df087976a79e3f80dd5e83d6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 7 16:33:44 2007 +0100
+
+ UC101: fix compiler warnings
+
+commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Mar 7 16:19:46 2007 +0100
+
+ HMI1001: fix build error, cleanup compiler warnings.
+
+commit ad5bb451ade552c44bef9119d907929ebc2c126f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Mar 6 18:08:43 2007 +0100
+
+ Restructure POST directory to support of other CPUs, boards, etc.
+
+commit a5284efd125967675b2e9c6ef7b95832268ad360
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Mar 6 18:01:47 2007 +0100
+
+ Fix HOSTARCH handling.
+ Patch by Mike Frysinger, Mar 05 2007
+
+commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 6 07:47:04 2007 +0100
+
+ [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
+
+ As provided by the AMCC applications team, this patch optimizes the
+ DDR2 setup for 166MHz bus speed. The values provided are also save
+ to use on a "normal" 133MHz PLB bus system. Only the refresh counter
+ setup has to be adjusted as done in this patch.
+
+ For this the NAND booting version had to include the "speed.c" file
+ from the cpu/ppc4xx directory. With this addition the NAND SPL image
+ will just fit into the 4kbytes of program space. gcc version 4.x as
+ provided with ELDK 4.x is needed to generate this optimized code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 1 21:11:36 2007 +0100
+
+ [PATCH] Update AMCC Katmai 440SPe eval board support
+
+ This patch updates the recently added Katmai board support. The biggest
+ change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
+ driver.
+
+ Please note, that still some problems are left with some memory
+ configurations. See the driver for more details.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 1 07:03:25 2007 +0100
+
+ [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ccbc7036648e465697ca298ba51e0e76dda352a0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Feb 28 01:28:53 2007 +0100
+
+ SC3: fix typo in default environment
+
+commit e344568b1b46af85ec32d815586f91bc115d6223
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Feb 27 20:15:30 2007 +0300
+
+ MCC200: Fixes for update procedure
+
+ - fix logic error in image type handling
+ - make sure file system images (cramfs etc.) get stored in flash
+ with image header stripped so they can be mounted through MTD
+
+commit 743571145b37182757d4e688a77860b36ee77573
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Feb 27 14:26:04 2007 +0100
+
+ Minor code cleanup.
+
commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
Author: Sergei Poselenov <sposelenov@emcraft.com>
Date: Tue Feb 27 12:40:16 2007 +0300
@@ -293,6 +462,14 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 2605e90bf676d48123afe5719a846d2b52b24aac
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Feb 16 07:57:42 2007 +0100
+
+ [PATCH] Added support for the jupiter board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
commit 497d012e5be0194e1084073d0081eb1a844796b2
Author: Gary Jennejohn <garyj@pollux.denx.de>
Date: Mon Feb 12 13:11:50 2007 +0100
diff --git a/Makefile b/Makefile
index 47008ee..29180f3 100644
--- a/Makefile
+++ b/Makefile
@@ -118,7 +118,7 @@
export ARCH CPU BOARD VENDOR SOC
ifndef CROSS_COMPILE
-ifeq ($(HOSTARCH),ppc)
+ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
@@ -128,12 +128,8 @@
CROSS_COMPILE = arm-linux-
endif
ifeq ($(ARCH),i386)
-ifeq ($(HOSTARCH),i386)
-CROSS_COMPILE =
-else
CROSS_COMPILE = i386-linux-
endif
-endif
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
@@ -207,7 +203,13 @@
LIBS += drivers/qe/qe.a
endif
LIBS += drivers/sk98lin/libsk98lin.a
-LIBS += post/libpost.a post/cpu/libcpu.a
+LIBS += post/libpost.a post/drivers/libpostdrivers.a
+LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
+ "post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
+LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
+ "post/cpu/$(CPU)/libpost$(CPU).a"; fi)
+LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
+ "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += $(BOARDLIBS)
@@ -220,9 +222,8 @@
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
- examples \
- post \
- post/cpu
+ examples
+
.PHONY : $(SUBDIRS)
ifeq ($(CONFIG_NAND_U_BOOT),y)
@@ -411,6 +412,9 @@
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+jupiter_config: unconfig
+ @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
+
v38b_config: unconfig
@./mkconfig -a v38b ppc mpc5xxx v38b
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index f5900bc..6b024ee 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -46,6 +46,11 @@
.globl tlbtabA
tlbtabA:
tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
/*
@@ -81,6 +86,11 @@
.globl tlbtabB
tlbtabB:
tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
/*
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
index 7830ebd..d5ee117 100644
--- a/board/amcc/luan/init.S
+++ b/board/amcc/luan/init.S
@@ -1,73 +1,31 @@
/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -80,53 +38,37 @@
*
*************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
+ tlbtab_start
-#if (CFG_LARGE_FLASH == 0xffc00000) /* if booting from large flash */
- /* large flash */
- tlbentry( 0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
- tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G)
- tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-#else /* else booting from small flash */
- tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xffa00000, SZ_1M, 0xffa00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
- tlbentry( 0xffb00000, SZ_1M, 0xffb00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#endif
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
- tlbentry( CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I )
+ /* internal ram (l2 cache) */
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
-#if (CFG_SRAM_BASE != 0) /* if SRAM up high and SDRAM at zero */
- tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-#elif (CFG_SMALL_FLASH == 0xff900000) /* else SRAM at 0 */
- tlbentry( 0x00000000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#elif (CFG_SMALL_FLASH == 0xfff00000)
- tlbentry( 0x00000000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#else
- #error DONT KNOW SRAM LOCATION
-#endif
-
- /* internal ram (l2 cache) */
- tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I )
-
- /* peripherals at f0000000 */
- tlbentry( CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I )
+ /* peripherals at f0000000 */
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
- /* PCI */
-#if (CONFIG_COMMANDS & CFG_CMD_PCI)
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I )
-#endif
- tlbtab_end
+ /* PCI */
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 06a57f6c..778aafc 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -106,105 +106,6 @@
/*************************************************************************
- * long int fixed_sdram()
- *
- ************************************************************************/
-static long int fixed_sdram(void)
-{ /* DDR2 init from BDI2000 script */
- mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - zero DCEN bit */
- mtdcr( 0x11, 0x84000000 );
- mtdcr( 0x10, 0x00000020 ); /* MCIF0_MCOPT1 - no ECC, 64 bits, 4 banks, DDR2 */
- mtdcr( 0x11, 0x2D122000 );
- mtdcr( 0x10, 0x00000026 ); /* MCIF0_CODT - die termination on */
- mtdcr( 0x11, 0x00800026 );
- mtdcr( 0x10, 0x00000081 ); /* MCIF0_WRDTR - Write DQS Adv 90 + Fractional DQS Delay */
- mtdcr( 0x11, 0x82000800 );
- mtdcr( 0x10, 0x00000080 ); /* MCIF0_CLKTR - advance addr clock by 180 deg */
- mtdcr( 0x11, 0x80000000 );
- mtdcr( 0x10, 0x00000040 ); /* MCIF0_MB0CF - turn on CS0, N x 10 coll */
- mtdcr( 0x11, 0x00000201 );
- mtdcr( 0x10, 0x00000044 ); /* MCIF0_MB1CF - turn on CS0, N x 10 coll */
- mtdcr( 0x11, 0x00000201 );
- mtdcr( 0x10, 0x00000030 ); /* MCIF0_RTR - refresh every 7.8125uS */
- mtdcr( 0x11, 0x08200000 );
- mtdcr( 0x10, 0x00000085 ); /* MCIF0_SDTR1 - timing register 1 */
- mtdcr( 0x11, 0x80201000 );
- mtdcr( 0x10, 0x00000086 ); /* MCIF0_SDTR2 - timing register 2 */
- mtdcr( 0x11, 0x42103242 );
- mtdcr( 0x10, 0x00000087 ); /* MCIF0_SDTR3 - timing register 3 */
- mtdcr( 0x11, 0x0C100D14 );
- mtdcr( 0x10, 0x00000088 ); /* MCIF0_MMODE - CAS is 4 cycles */
- mtdcr( 0x11, 0x00000642 );
- mtdcr( 0x10, 0x00000089 ); /* MCIF0_MEMODE - diff DQS disabled */
- mtdcr( 0x11, 0x00000400 ); /* ODT term disabled */
-
- mtdcr( 0x10, 0x00000050 ); /* MCIF0_INITPLR0 - NOP */
- mtdcr( 0x11, 0x81b80000 );
- mtdcr( 0x10, 0x00000051 ); /* MCIF0_INITPLR1 - PRE */
- mtdcr( 0x11, 0x82100400 );
- mtdcr( 0x10, 0x00000052 ); /* MCIF0_INITPLR2 - EMR2 */
- mtdcr( 0x11, 0x80820000 );
- mtdcr( 0x10, 0x00000053 ); /* MCIF0_INITPLR3 - EMR3 */
- mtdcr( 0x11, 0x80830000 );
- mtdcr( 0x10, 0x00000054 ); /* MCIF0_INITPLR4 - EMR DLL ENABLE */
- mtdcr( 0x11, 0x80810000 );
- mtdcr( 0x10, 0x00000055 ); /* MCIF0_INITPLR5 - MR DLL RESET */
- mtdcr( 0x11, 0x80800542 );
- mtdcr( 0x10, 0x00000056 ); /* MCIF0_INITPLR6 - PRE */
- mtdcr( 0x11, 0x82100400 );
- mtdcr( 0x10, 0x00000057 ); /* MCIF0_INITPLR7 - refresh */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x00000058 ); /* MCIF0_INITPLR8 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x00000059 ); /* MCIF0_INITPLR9 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x0000005A ); /* MCIF0_INITPLR10 */
- mtdcr( 0x11, 0x99080000 );
- mtdcr( 0x10, 0x0000005B ); /* MCIF0_INITPLR11 - MR */
- mtdcr( 0x11, 0x80800442 );
- mtdcr( 0x10, 0x0000005C ); /* MCIF0_INITPLR12 - EMR OCD Default */
- mtdcr( 0x11, 0x80810380 );
- mtdcr( 0x10, 0x0000005D ); /* MCIF0_INITPLR13 - EMR OCD exit */
- mtdcr( 0x11, 0x80810000 );
- udelay( 10*1000 );
-
- mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - execute preloaded init */
- mtdcr( 0x11, 0x28000000 ); /* set DC_EN */
- udelay( 100*1000 );
-
- mtdcr( 0x40, 0x0000F800 ); /* MQ0_B0BAS: base addr 00000000 / 256MB */
- mtdcr( 0x41, 0x1000F800 ); /* MQ0_B1BAS: base addr 10000000 / 256MB */
-
- mtdcr( 0x10, 0x00000078 ); /* MCIF0_RDCC - auto set read stage */
- mtdcr( 0x11, 0x00000000 );
- mtdcr( 0x10, 0x00000070 ); /* MCIF0_RQDC - read DQS delay control */
- mtdcr( 0x11, 0x8000003A ); /* enabled, frac DQS delay */
- mtdcr( 0x10, 0x00000074 ); /* MCIF0_RFDC - two clock feedback delay */
- mtdcr( 0x11, 0x00000200 );
-
- return 512 << 20;
-}
-
-
-/*************************************************************************
- * long int initdram
- *
- ************************************************************************/
-long int initdram( int board_type )
-{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
-#else
- dram_size = fixed_sdram ();
-#endif
-
- return dram_size;
-}
-
-
-/*************************************************************************
* int testdram()
*
************************************************************************/
diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds
index d122f49..72ce685 100644
--- a/board/amcc/luan/u-boot.lds
+++ b/board/amcc/luan/u-boot.lds
@@ -68,19 +68,6 @@
cpu/ppc4xx/start.o (.text)
board/amcc/luan/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/environment.o(.text)*/
*(.text)
*(.fixup)
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index 7e0b132..d211c71 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -22,55 +22,7 @@
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-#define _256M 0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_8M 0x00000060
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -83,19 +35,23 @@
*
*************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
- tlbtab_end
+ tlbtab_start
+
+ tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 77f1438..f8b837e 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -6,7 +6,7 @@
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -379,16 +379,18 @@
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ ulong speed = get_bus_freq(0);
+
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030602);
- mtsdram(DDR0_04, 0x13030300);
- mtsdram(DDR0_05, 0x0202050E);
- mtsdram(DDR0_06, 0x0104C823);
+ mtsdram(DDR0_04, 0x0A020200);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0102C812);
mtsdram(DDR0_07, 0x000D0100);
- mtsdram(DDR0_08, 0x02360001);
+ mtsdram(DDR0_08, 0x02430001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000300);
mtsdram(DDR0_11, 0x0027C800);
@@ -402,13 +404,16 @@
mtsdram(DDR0_22, 0x00267F0B);
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01010002);
- mtsdram(DDR0_26, 0x5B260181);
+ if (speed > 133333333)
+ mtsdram(DDR0_26, 0x5B26050C);
+ else
+ mtsdram(DDR0_26, 0x5B260408);
mtsdram(DDR0_27, 0x0000682B);
mtsdram(DDR0_28, 0x00000000);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
- mtsdram(DDR0_43, 0x050A0200);
- mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_43, 0x030A0200);
+ mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
wait_for_dlllock();
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index c9eca68..c92dcf7 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
@@ -19,56 +22,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-/* port to AMCC 440SPE evaluatioon board - SG April 12,2005 */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
-#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
-#define TLB2(a) ((a) & 0x00000fbf)
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ;\
-0: mflr r0 ;\
- mtlr r1 ;\
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -89,12 +46,18 @@
.globl tlbtabA
tlbtabA:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
@@ -126,12 +89,18 @@
.globl tlbtabB
tlbtabB:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index e9b34dd..90eaab1 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -44,8 +44,6 @@
char *remove_l_w_space(char *in_str );
char *remove_t_w_space(char *in_str );
int get_console_port(void);
-unsigned long ppcMfcpr(unsigned long cpr_reg);
-unsigned long ppcMfsdr(unsigned long sdr_reg);
int ppc440spe_init_pcie_rootport(int port);
void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
@@ -221,7 +219,7 @@
|
+-------------------------------------------------------------------*/
/* Read Pin Strap Register in PPC440SP */
- sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+ mfsdr(SDR0_PINSTP, sdr0_pinstp);
bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
switch (bootstrap_settings) {
@@ -246,7 +244,7 @@
* Boot Settings in IIC EEprom address 0x50 or 0x54
* Read Serial Device Strap Register1 in PPC440SPe
*/
- sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+ mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
@@ -564,277 +562,6 @@
return 0;
}
-static long int yucca_probe_for_dimms(void)
-{
- int dimm_installed[MAXDIMMS];
- int dimm_num, result;
- int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
- uchar dimm_spd_data[MAX_SPD_BYTES];
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* check if there is a chip at the dimm address */
- switch (dimm_num) {
- case 0:
- dimm_addr = IIC0_DIMM0_ADDR;
- break;
- case 1:
- dimm_addr = IIC0_DIMM1_ADDR;
- break;
- }
-
- result = i2c_probe(dimm_addr);
-
- memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
- if (result == 0) {
- /* read first byte of SPD data, if there is any data */
- result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
-
- if (result == 0) {
- result = dimm_spd_data[0];
- result = result > MAX_SPD_BYTES ?
- MAX_SPD_BYTES : result;
- result = i2c_read(dimm_addr, 0, 1,
- dimm_spd_data, result);
- }
- }
-
- if ((result == 0) &&
- (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
- dimm_installed[dimm_num] = TRUE;
- dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
- } else {
- dimm_installed[dimm_num] = FALSE;
- debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
- }
- }
-
- if (dimms_found == 0) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
- }
-
- if (dimm_installed[0] != TRUE) {
- printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
- printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
- hang();
- }
-
- return dimms_found;
-}
-
-/*************************************************************************
- * init SDRAM controller with fixed value
- * the initialization values are for 2x MICRON DDR2
- * PN: MT18HTF6472DY-53EB2
- * 512MB, DDR2, 533, CL4, ECC, REG
- ************************************************************************/
-static long int fixed_sdram(void)
-{
- long int yucca_dimms = 0;
-
- yucca_dimms = yucca_probe_for_dimms();
-
- /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x84000000 );
-
- /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */
- mtdcr( 0x10, 0x00000020 );
- mtdcr( 0x11, 0x2D122000 );
-
- /* SET MCIF0_CODT Die Termination On */
- mtdcr( 0x10, 0x00000026 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x2A800021 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x02800021 );
-
- /* On-Die Termination for Bank 0 */
- mtdcr( 0x10, 0x00000022 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x06000000 );
-
- /* On-Die Termination for Bank 1 */
- mtdcr( 0x10, 0x00000023 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x01800000 );
-
- /* On-Die Termination for Bank 2 */
- mtdcr( 0x10, 0x00000024 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* On-Die Termination for Bank 3 */
- mtdcr( 0x10, 0x00000025 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtdcr( 0x10, 0x00000030 );
- mtdcr( 0x11, 0x08200000 );
-
- /* SET MCIF0_MMODE CL 4 */
- mtdcr( 0x10, 0x00000088 );
- mtdcr( 0x11, 0x00000642 );
-
- /* MCIF0_MEMODE */
- mtdcr( 0x10, 0x00000089 );
- mtdcr( 0x11, 0x00000004 );
-
- /*SET MCIF0_MB0CF */
- mtdcr( 0x10, 0x00000040 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB1CF */
- mtdcr( 0x10, 0x00000044 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB2CF */
- mtdcr( 0x10, 0x00000048 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_MB3CF */
- mtdcr( 0x10, 0x0000004c );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_INITPLR0 # NOP */
- mtdcr( 0x10, 0x00000050 );
- mtdcr( 0x11, 0xB5380000 );
-
- /* SET MCIF0_INITPLR1 # PRE */
- mtdcr( 0x10, 0x00000051 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR2 # EMR2 */
- mtdcr( 0x10, 0x00000052 );
- mtdcr( 0x11, 0x80820000 );
-
- /* SET MCIF0_INITPLR3 # EMR3 */
- mtdcr( 0x10, 0x00000053 );
- mtdcr( 0x11, 0x80830000 );
-
- /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */
- mtdcr( 0x10, 0x00000054 );
- mtdcr( 0x11, 0x80810000 );
-
- /* SET MCIF0_INITPLR5 # MR DLL RESET */
- mtdcr( 0x10, 0x00000055 );
- mtdcr( 0x11, 0x80800542 );
-
- /* SET MCIF0_INITPLR6 # PRE */
- mtdcr( 0x10, 0x00000056 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR7 # Refresh */
- mtdcr( 0x10, 0x00000057 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR8 # Refresh */
- mtdcr( 0x10, 0x00000058 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR9 # Refresh */
- mtdcr( 0x10, 0x00000059 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR10 # Refresh */
- mtdcr( 0x10, 0x0000005A );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR11 # MR */
- mtdcr( 0x10, 0x0000005B );
- mtdcr( 0x11, 0x80800442 );
-
- /* SET MCIF0_INITPLR12 # EMR OCD Default*/
- mtdcr( 0x10, 0x0000005C );
- mtdcr( 0x11, 0x80810380 );
-
- /* SET MCIF0_INITPLR13 # EMR OCD Exit */
- mtdcr( 0x10, 0x0000005D );
- mtdcr( 0x11, 0x80810000 );
-
- /* 0x80: Adv Addr clock by 180 deg */
- mtdcr( 0x10, 0x00000080 );
- mtdcr( 0x11, 0x80000000 );
-
- /* 0x21: Exit self refresh, set DC_EN */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x28000000 );
-
- /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */
- mtdcr( 0x10, 0x00000081 );
- mtdcr( 0x11, 0x80000800 );
-
- /* MCIF0_SDTR1 */
- mtdcr( 0x10, 0x00000085 );
- mtdcr( 0x11, 0x80201000 );
-
- /* MCIF0_SDTR2 */
- mtdcr( 0x10, 0x00000086 );
- mtdcr( 0x11, 0x42103242 );
-
- /* MCIF0_SDTR3 */
- mtdcr( 0x10, 0x00000087 );
- mtdcr( 0x11, 0x0C100D14 );
-
- /* SET MQ0_B0BAS base addr 00000000 / 256MB */
- mtdcr( 0x40, 0x0000F800 );
-
- /* SET MQ0_B1BAS base addr 10000000 / 256MB */
- mtdcr( 0x41, 0x0400F800 );
-
- /* SET MQ0_B2BAS base addr 20000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x42, 0x0800F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x42, 0x00000000 );
-
- /* SET MQ0_B3BAS base addr 30000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x43, 0x0C00F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x43, 0x00000000 );
-
- /* SDRAM_RQDC */
- mtdcr( 0x10, 0x00000070 );
- mtdcr( 0x11, 0x8000003F );
-
- /* SDRAM_RDCC */
- mtdcr( 0x10, 0x00000078 );
- mtdcr( 0x11, 0x80000000 );
-
- /* SDRAM_RFDC */
- mtdcr( 0x10, 0x00000074 );
- mtdcr( 0x11, 0x00000220 );
-
- return (yucca_dimms * 512) << 20;
-}
-
-long int initdram (int board_type)
-{
- long dram_size = 0;
-
- dram_size = fixed_sdram();
-
- return dram_size;
-}
-
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
@@ -1267,42 +994,3 @@
#endif
return (BOARD_OPTION_NOT_SELECTED);
}
-
-/*---------------------------------------------------------------------------+
- | ppcMfcpr.
- +---------------------------------------------------------------------------*/
-unsigned long ppcMfcpr(unsigned long cpr_reg)
-{
- unsigned long msr;
- unsigned long cpr_cfgaddr_temp;
- unsigned long cpr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR);
- mtdcr(CPR0_CFGADDR, cpr_reg);
- cpr_value = mfdcr(CPR0_CFGDATA);
- mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
- mtmsr(msr);
-
- return (cpr_value);
-}
-
-/*----------------------------------------------------------------------------+
-| Indirect Access of the System DCR's (SDR)
-| ppcMfsdr
-+----------------------------------------------------------------------------*/
-unsigned long ppcMfsdr(unsigned long sdr_reg)
-{
- unsigned long msr;
- unsigned long sdr_cfgaddr_temp;
- unsigned long sdr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR);
- mtdcr(SDR0_CFGADDR, sdr_reg);
- sdr_value = mfdcr(SDR0_CFGDATA);
- mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
- mtmsr(msr);
-
- return (sdr_value);
-}
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 237e863..9fa0e74 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -103,9 +103,9 @@
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -179,7 +179,7 @@
return kbd_data;
}
-static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str)
+static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
{
char s1 = str[0];
char s2;
@@ -222,11 +222,11 @@
return 0;
}
-static uchar *key_match (const struct kbd_data_t *kbd_data)
+static char *key_match (const struct kbd_data_t *kbd_data)
{
- uchar magic[sizeof (kbd_magic_prefix) + 1];
- uchar *suffix;
- uchar *kbd_magic_keys;
+ char magic[sizeof (kbd_magic_prefix) + 1];
+ char *suffix;
+ char *kbd_magic_keys;
/*
* The following string defines the characters that can be appended
@@ -247,7 +247,7 @@
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
if (compare_magic(kbd_data, getenv(magic)) == 0) {
- uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+ char cmd_name[sizeof (kbd_command_prefix) + 1];
char *cmd;
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
@@ -267,7 +267,7 @@
#ifdef CONFIG_PREBOOT
struct kbd_data_t kbd_data;
/* Decode keys */
- uchar *str = strdup (key_match (get_keys (&kbd_data)));
+ char *str = strdup (key_match (get_keys (&kbd_data)));
/* Set or delete definition */
setenv ("preboot", str);
free (str);
diff --git a/board/jupiter/Makefile b/board/jupiter/Makefile
new file mode 100644
index 0000000..aed3af0
--- /dev/null
+++ b/board/jupiter/Makefile
@@ -0,0 +1,51 @@
+
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/jupiter/config.mk b/board/jupiter/config.mk
new file mode 100644
index 0000000..5f4da96
--- /dev/null
+++ b/board/jupiter/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2007
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Jupiter board:
+#
+# Valid values for TEXT_BASE are:
+#
+# 0xFFF00000 boot high (standard configuration)
+# 0x00100000 boot from RAM (for testing only)
+#
+
+ifndef TEXT_BASE
+## Standard: boot high
+TEXT_BASE = 0xFFF00000
+## For testing: boot from RAM
+# TEXT_BASE = 0x00100000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+#PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -DDEBUG -I$(TOPDIR)/board
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
new file mode 100644
index 0000000..04fda4a
--- /dev/null
+++ b/board/jupiter/jupiter.c
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+
+#define SDRAM_DDR 0
+#if 1
+/* Settings Icecube */
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+#else
+/*Settings Jupiter UB 1.0.0 */
+#define SDRAM_MODE 0x008D0000
+#define SDRAM_CONTROL 0xD04F0000
+#define SDRAM_CONFIG1 0xf7277f00
+#define SDRAM_CONFIG2 0x88b70004
+#endif
+
+#ifndef CFG_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ __asm__ volatile ("sync");
+#endif
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+ ulong dramsize2 = 0;
+ uint svr, pvr;
+
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ /* let SDRAM CS1 start right after CS0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+ /* find RAM size using SDRAM CS1 only */
+ if (!dramsize)
+ sdram_start(0);
+ test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ if (!dramsize) {
+ sdram_start(1);
+ test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ }
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize2 = test1;
+ } else {
+ dramsize2 = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize2 < (1 << 20)) {
+ dramsize2 = 0;
+ }
+
+ /* set SDRAM CS1 size according to the amount of RAM found */
+ if (dramsize2 > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+ | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ }
+
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) &&
+ (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+ }
+
+ return dramsize + dramsize2;
+}
+
+int checkboard (void)
+{
+ puts ("Board: Sauter (Jupiter)\n");
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+#if defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+}
+
+int board_early_init_r (void)
+{
+ flash_preinit ();
+ return 0;
+}
+
+void flash_afterinit(ulong size)
+{
+ if (size == 0x1000000) { /* adjust mapping */
+ *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
+ START_REG(CFG_BOOTCS_START | size);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
+ STOP_REG(CFG_BOOTCS_START | size, size);
+ }
+#if defined(CONFIG_MPC5200)
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+}
+
+int update_flash_size (int flash_size)
+{
+ flash_afterinit (flash_size);
+ return 0;
+}
+
+int board_early_init_f (void)
+{
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+ debug ("init_ide_reset\n");
+
+ /* Configure PSC1_4 as GPIO output for ATA reset */
+ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
+ /* Deassert reset */
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+}
+
+void ide_set_reset (int idereset)
+{
+ debug ("ide_reset(%d)\n", idereset);
+
+ if (idereset) {
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+ /* Make a delay. MPC5200 spec says 25 usec min */
+ udelay(500000);
+ } else {
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+ }
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif
diff --git a/board/jupiter/u-boot.lds b/board/jupiter/u-boot.lds
new file mode 100644
index 0000000..f23432e
--- /dev/null
+++ b/board/jupiter/u-boot.lds
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
index b803585..7a6b3be 100644
--- a/board/uc101/uc101.c
+++ b/board/uc101/uc101.c
@@ -170,9 +170,9 @@
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -266,7 +266,7 @@
return kbd_data;
}
-static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str)
+static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
{
char s1 = str[0];
@@ -283,11 +283,11 @@
return 0;
}
-static uchar *key_match (const struct kbd_data_t *kbd_data)
+static char *key_match (const struct kbd_data_t *kbd_data)
{
- uchar magic[sizeof (kbd_magic_prefix) + 1];
- uchar *suffix;
- uchar *kbd_magic_keys;
+ char magic[sizeof (kbd_magic_prefix) + 1];
+ char *suffix;
+ char *kbd_magic_keys;
/*
* The following string defines the characters that can be appended
@@ -308,7 +308,7 @@
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
if (compare_magic(kbd_data, getenv(magic)) == 0) {
- uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+ char cmd_name[sizeof (kbd_command_prefix) + 1];
char *cmd;
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
@@ -331,7 +331,7 @@
#ifdef CONFIG_PREBOOT
struct kbd_data_t kbd_data;
/* Decode keys */
- uchar *str = strdup (key_match (get_keys (&kbd_data)));
+ char *str = strdup (key_match (get_keys (&kbd_data)));
/* Set or delete definition */
setenv ("preboot", str);
free (str);
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index e639234..13a3870 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -878,12 +878,13 @@
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
-#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
- defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
- defined(CONFIG_MCC200) || defined(CONFIG_MOTIONPRO) || \
- defined(CONFIG_O2DNT) || defined(CONFIG_PM520) || \
- defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) || \
- defined(CONFIG_UC101) || defined(CONFIG_V38B)
+#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
+ defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
+ defined(CONFIG_JUPITER) || defined(CONFIG_MCC200) || \
+ defined(CONFIG_MOTIONPRO)|| defined(CONFIG_O2DNT) || \
+ defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
+ defined(CONFIG_TQM5200) || defined(CONFIG_UC101) || \
+ defined(CONFIG_V38B)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 32d44db..10b4c18 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -46,6 +46,7 @@
#include <asm/processor.h>
#include <i2c.h>
#include <ppc4xx.h>
+#include <asm/mmu.h>
#if defined(CONFIG_SPD_EEPROM) && \
(defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
@@ -229,6 +230,22 @@
#define TRUE 1
#define FALSE 0
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
0xFFFFFFFF, 0xFFFFFFFF},
@@ -259,6 +276,7 @@
#ifdef CFG_SIMULATE_SPD_EEPROM
extern unsigned char cfg_simulate_spd_eeprom[128];
#endif
+void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
unsigned char spd_read(uchar chip, uint addr);
@@ -377,6 +395,11 @@
total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
num_dimm_banks);
+#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
+ /* and program tlb entries for this size (dynamic) */
+ program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE);
+#endif
+
/*
* program SDRAM Clock Timing Register (SDRAM0_CLKTR)
*/
@@ -1330,11 +1353,11 @@
*/
cr |= SDRAM_BXCR_SDBE;
- for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
+ for (i = 0; i < num_banks; i++) {
+ bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes =
(4 * 1024 * 1024) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
- }
+ bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr;
+ }
}
}
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 35b2315..83c9911 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -168,8 +168,8 @@
static void program_mode(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery);
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery);
static void program_tr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -185,9 +185,10 @@
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
+ ddr_cas_id_t selected_cas,
int write_recovery);
static unsigned long is_ecc_enabled(void);
+#ifdef CONFIG_DDR_ECC
static void program_ecc(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
@@ -195,6 +196,7 @@
static void program_ecc_addr(unsigned long start_address,
unsigned long num_bytes,
unsigned long tlb_word2_i_value);
+#endif
static void program_DQS_calibration(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -255,15 +257,6 @@
}
}
-static void wait_ddr_idle(void)
-{
- u32 val;
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
-}
-
static unsigned char spd_read(uchar chip, uint addr)
{
unsigned char data[2];
@@ -491,7 +484,7 @@
(val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
(SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
- | SDRAM_MEMODE_RTT_75OHM | SDRAM_MEMODE_DQS_ENABLE));
+ | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
/*------------------------------------------------------------------
* Program Initialization preload registers.
@@ -537,10 +530,12 @@
*-----------------------------------------------------------------*/
program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#ifdef CONFIG_DDR_ECC
/*------------------------------------------------------------------
* If ecc is enabled, initialize the parity bits.
*-----------------------------------------------------------------*/
program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
+#endif
#ifdef DEBUG
ppc440sp_sdram_register_dump();
@@ -702,7 +697,7 @@
*-----------------------------------------------------------------*/
get_sys_info(&board_cfg);
- mfsdr(sdr_ddr0, sdr_ddrpll);
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
/*
@@ -877,7 +872,11 @@
unsigned long ddrtype;
unsigned long val;
+#ifdef CONFIG_DDR_ECC
ecc_enabled = TRUE;
+#else
+ ecc_enabled = FALSE;
+#endif
dimm_32bit = FALSE;
dimm_64bit = FALSE;
buf0 = FALSE;
@@ -1149,7 +1148,7 @@
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
+ ddr_cas_id_t selected_cas,
int write_recovery)
{
u32 cas = 0;
@@ -1314,7 +1313,7 @@
*-----------------------------------------------------------------*/
get_sys_info(&board_cfg);
- mfsdr(sdr_ddr0, sdr_ddrpll);
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
/*------------------------------------------------------------------
@@ -1463,11 +1462,12 @@
mfsdram(SDRAM_MMODE, mmode);
mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100);
- cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100);
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100);
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100);
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100);
+ /* add 10 here because of rounding problems */
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
+ cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
if (sdram_ddr1 == TRUE) { /* DDR1 */
if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
@@ -1498,7 +1498,11 @@
} else {
printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
+ printf("cas3=%d cas4=%d cas5=%d\n",
+ cas_3_0_available, cas_4_0_available, cas_5_0_available);
+ printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n",
+ sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
hang();
}
}
@@ -1575,7 +1579,7 @@
/*------------------------------------------------------------------
* Set the SDRAM Refresh Timing Register, SDRAM_RTR
*-----------------------------------------------------------------*/
- mfsdr(sdr_ddr0, sdr_ddrpll);
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
max_refresh_rate = 0;
@@ -1661,7 +1665,7 @@
*-----------------------------------------------------------------*/
get_sys_info(&board_cfg);
- mfsdr(sdr_ddr0, sdr_ddrpll);
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
/*------------------------------------------------------------------
@@ -2069,7 +2073,7 @@
* Set the sizes
*-----------------------------------------------------------------*/
baseadd_size = 0;
- rank_size_bytes = 1024 * 1024 * rank_size_id;
+ rank_size_bytes = 4 * 1024 * 1024 * rank_size_id;
switch (rank_size_id) {
case 0x02:
baseadd_size |= SDRAM_RXBAS_SDSZ_8;
@@ -2106,8 +2110,8 @@
for (i = 0; i < num_ranks; i++) {
mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
- (rank_base_addr & SDRAM_RXBAS_SDBA_MASK) |
- baseadd_size);
+ (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
+ baseadd_size));
rank_base_addr += rank_size_bytes;
}
}
@@ -2130,9 +2134,10 @@
ecc = max(ecc, SDRAM_MCOPT1_MCHK_CHK_DECODE(val));
}
- return(ecc);
+ return ecc;
}
+#ifdef CONFIG_DDR_ECC
/*-----------------------------------------------------------------------------+
* program_ecc.
*-----------------------------------------------------------------------------*/
@@ -2208,6 +2213,15 @@
}
#endif
+static void wait_ddr_idle(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
/*-----------------------------------------------------------------------------+
* program_ecc_addr.
*-----------------------------------------------------------------------------*/
@@ -2276,6 +2290,7 @@
#endif
}
}
+#endif
/*-----------------------------------------------------------------------------+
* program_DQS_calibration.
@@ -2531,7 +2546,6 @@
}
} /* for rffd */
-
/*------------------------------------------------------------------
* Set the average RFFD value
*-----------------------------------------------------------------*/
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 24b30df..54be37c 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1361,7 +1361,7 @@
relocate_code:
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SPE)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
@@ -1916,43 +1916,43 @@
/*----------------------------------------------------------------------------+
| dcbz_area.
+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
+ function_prolog(dcbz_area)
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
..d_ra2:mtctr r5
..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
+ addi r3,r3,32
+ bdnz ..d_ag2
+ sync
+ blr
+ function_epilog(dcbz_area)
/*----------------------------------------------------------------------------+
| dflush. Assume 32K at vector address is cachable.
+----------------------------------------------------------------------------*/
- function_prolog(dflush)
- mfmsr r9
- rlwinm r8,r9,0,15,13
- rlwinm r8,r8,0,17,15
- mtmsr r8
- addi r3,r0,0x0000
- mtspr dvlim,r3
- mfspr r3,ivpr
- addi r4,r0,1024
- mtctr r4
+ function_prolog(dflush)
+ mfmsr r9
+ rlwinm r8,r9,0,15,13
+ rlwinm r8,r8,0,17,15
+ mtmsr r8
+ addi r3,r0,0x0000
+ mtspr dvlim,r3
+ mfspr r3,ivpr
+ addi r4,r0,1024
+ mtctr r4
..dflush_loop:
- lwz r6,0x0(r3)
- addi r3,r3,32
- bdnz ..dflush_loop
- addi r3,r3,-32
- mtctr r4
+ lwz r6,0x0(r3)
+ addi r3,r3,32
+ bdnz ..dflush_loop
+ addi r3,r3,-32
+ mtctr r4
..ag: dcbf r0,r3
- addi r3,r3,-32
- bdnz ..ag
- sync
- mtmsr r9
- blr
- function_epilog(dflush)
+ addi r3,r3,-32
+ bdnz ..ag
+ sync
+ mtmsr r9
+ blr
+ function_epilog(dflush)
#endif /* CONFIG_440 */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index cfaf153..095b5f6 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -210,6 +210,7 @@
*/
#define CONFIG_MPC5xxx_FEC 1
#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_MII 1 /* MII PHY management */
/*
* GPIO configuration
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
new file mode 100644
index 0000000..48056a3
--- /dev/null
+++ b/include/configs/jupiter.h
@@ -0,0 +1,277 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* especially an MPC5200 */
+#define CONFIG_JUPITER 1 /* ... on Jupiter board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define CONFIG_BOARD_EARLY_INIT_R 1
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+/*#define CONFIG_PCI */
+
+#if defined(CONFIG_PCI)
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+#define ADD_PCI_CMD CFG_CMD_PCI
+#endif
+
+#define CFG_XLB_PIPELINING 1
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "bootfile=/tftpboot/jupiter/uImage\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+#if 0
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+#endif
+
+#if 0
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
+#endif
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_FLASH_SIZE 0x01000000
+
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#define CFG_ENV_ADDR (TEXT_BASE + 0x40000) /* third sector */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_UPDATE_FLASH_SIZE 1
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x20000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG 0x10000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+#define CFG_ALT_MEMTEST 1
+
+#define CFG_LOAD_ADDR 0x200000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00047801
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index f350155..1606d0d 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -108,6 +108,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/
+#define CONFIG_DDR_ECC 1 /* with ECC support */
#undef CONFIG_STRESS
/*-----------------------------------------------------------------------
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 5c9d208..9c8769b 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -37,8 +37,9 @@
#define CONFIG_440 1
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -132,10 +133,9 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* SPD EEPROM init doesn't support DDR2 */
-#define SPD_EEPROM_ADDRESS {0x52,0x53} /* I2C SPD addresses */
-#define IIC0_DIMM0_ADDR 0x52
-#define IIC0_DIMM1_ADDR 0x53
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC /* no ECC support for now */
/*-----------------------------------------------------------------------
* I2C
@@ -206,11 +206,6 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
#ifdef DEBUG
#define CONFIG_PANIC_HANG
#else
@@ -219,9 +214,7 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
@@ -232,7 +225,6 @@
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
- CFG_CMD_SETGETDCR | \
CFG_CMD_SDRAM | \
0)
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 0e3660b..fe4e638 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -148,8 +148,9 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */
+#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 6417ed8..eb4859c 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -45,11 +45,11 @@
#define EXTCLK_50 50000000
#define EXTCLK_83 83333333
-#define CONFIG_IBM_EMAC4_V4 1
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
#undef CONFIG_SHOW_BOOT_PROGRESS
#undef CONFIG_STRESS
-#undef ENABLE_ECC
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@@ -118,10 +118,9 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
-#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */
-#define IIC0_DIMM0_ADDR 0x53
-#define IIC0_DIMM1_ADDR 0x52
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC /* no ECC support for now */
/*-----------------------------------------------------------------------
* I2C
@@ -211,6 +210,7 @@
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
diff --git a/include/ppc440.h b/include/ppc440.h
index 1c7f11c..9b15c2c 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -417,7 +417,9 @@
#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */
#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */
#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
+#endif /* CONFIG_440SPE */
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/*----------------------------------------------------------------------------+
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -453,9 +455,16 @@
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
-#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
+#if defined(CONFIG_440SPE)
+#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
+#endif /* CONFIG_440SPE */
+#if defined(CONFIG_440SP)
+#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
+#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFF800000))
+#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFF800000))
+#endif /* CONFIG_440SP */
#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6)
#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF)
@@ -2167,6 +2176,20 @@
/*-----------------------------------------------------------------------------+
| SDR0 Bit Settings
+-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440SP)
+#define SDR0_SRST 0x0200
+
+#define SDR0_DDR0 0x00E1
+#define SDR0_DDR0_DPLLRST 0x80000000
+#define SDR0_DDR0_DDRM_MASK 0x60000000
+#define SDR0_DDR0_DDRM_DDR1 0x20000000
+#define SDR0_DDR0_DDRM_DDR2 0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
+#endif
+
#if defined(CONFIG_440SPE)
#define SDR0_CP440 0x0180
#define SDR0_CP440_ERPN_MASK 0x30000000
@@ -3293,26 +3316,26 @@
/*
* Macros for accessing the indirect EBC registers
*/
-#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); }
-#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); }
+#define mtebc(reg, data) do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } while (0)
+#define mfebc(reg, data) do { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } while (0)
/*
* Macros for accessing the indirect SDRAM controller registers
*/
-#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
-#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); }
+#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
+#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
/*
* Macros for accessing the indirect clocking controller registers
*/
-#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); }
-#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); }
+#define mtclk(reg, data) do { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } while (0)
+#define mfclk(reg, data) do { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } while (0)
/*
* Macros for accessing the sdr controller registers
*/
-#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); }
-#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); }
+#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
+#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
#ifndef __ASSEMBLY__
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index b42da8c..510999d 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -30,7 +30,7 @@
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o init.o resetvec.o
-COBJS = nand_boot.o ndfc.o sdram.o
+COBJS = nand_boot.o ndfc.o sdram.o speed.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -69,6 +69,10 @@
@rm -f $(obj)start.S
ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
+$(obj)speed.c:
+ @rm -f $(obj)speed.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/speed.c $(obj)speed.c
+
# from board directory
$(obj)init.S:
@rm -f $(obj)init.S
diff --git a/post/Makefile b/post/Makefile
index 228bafc..f32af95 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -22,14 +22,10 @@
#
-SUBDIRS = cpu
+SUBDIRS = drivers cpu lib_$(ARCH) board/$(BOARDDIR)
LIB = libpost.a
-AOBJS = cache_8xx.o
-COBJS = cache.o codec.o cpu.o dsp.o ether.o
-COBJS += i2c.o memory.o post.o rtc.o
-COBJS += spr.o sysmon.o tests.o uart.o
-COBJS += usb.o watchdog.o
+COBJS = post.o tests.o
include $(TOPDIR)/post/rules.mk
diff --git a/post/board/lwmon/Makefile b/post/board/lwmon/Makefile
new file mode 100644
index 0000000..899b0dc
--- /dev/null
+++ b/post/board/lwmon/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+LIB = libpostlwmon.a
+
+COBJS = sysmon.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/board/lwmon/sysmon.c b/post/board/lwmon/sysmon.c
new file mode 100644
index 0000000..f61d598
--- /dev/null
+++ b/post/board/lwmon/sysmon.c
@@ -0,0 +1,331 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <post.h>
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/*
+ * SYSMON test
+ *
+ * This test performs the system hardware monitoring.
+ * The test passes when all the following voltages and temperatures
+ * are within allowed ranges:
+ *
+ * Board temperature
+ * Front temperature
+ * +3.3V CPU logic
+ * +5V logic
+ * +12V PCMCIA
+ * +12V CCFL
+ * +5V standby
+ *
+ * CCFL is not enabled if temperature values are not within allowed ranges
+ *
+ * See the list off all parameters in the sysmon_table below
+ */
+
+#include <post.h>
+#include <watchdog.h>
+#include <i2c.h>
+
+#if CONFIG_POST & CFG_POST_SYSMON
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int sysmon_temp_invalid = 0;
+
+/* #define DEBUG */
+
+#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off)
+
+typedef struct sysmon_s sysmon_t;
+typedef struct sysmon_table_s sysmon_table_t;
+
+static void sysmon_lm87_init (sysmon_t * this);
+static void sysmon_pic_init (sysmon_t * this);
+static uint sysmon_i2c_read (sysmon_t * this, uint addr);
+static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr);
+static void sysmon_ccfl_disable (sysmon_table_t * this);
+static void sysmon_ccfl_enable (sysmon_table_t * this);
+
+struct sysmon_s
+{
+ uchar chip;
+ void (*init)(sysmon_t *);
+ uint (*read)(sysmon_t *, uint);
+};
+
+static sysmon_t sysmon_lm87 =
+ {CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
+static sysmon_t sysmon_lm87_sgn =
+ {CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
+static sysmon_t sysmon_pic =
+ {CFG_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
+
+static sysmon_t * sysmon_list[] =
+{
+ &sysmon_lm87,
+ &sysmon_lm87_sgn,
+ &sysmon_pic,
+ NULL
+};
+
+struct sysmon_table_s
+{
+ char * name;
+ char * unit_name;
+ sysmon_t * sysmon;
+ void (*exec_before)(sysmon_table_t *);
+ void (*exec_after)(sysmon_table_t *);
+
+ int unit_precision;
+ int unit_div;
+ int unit_min;
+ int unit_max;
+ uint val_mask;
+ uint val_min;
+ uint val_max;
+ int val_valid;
+ uint val_min_alt;
+ uint val_max_alt;
+ int val_valid_alt;
+ uint addr;
+};
+
+static sysmon_table_t sysmon_table[] =
+{
+ {"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable,
+ 1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27},
+
+ {"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable,
+ 1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29},
+
+ {"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL,
+ 100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22},
+
+ {"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL,
+ 100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23},
+
+ {"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
+ 100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21},
+
+ {"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
+ 100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24},
+
+ {"+ 5 V standby", "V", &sysmon_pic, NULL, NULL,
+ 100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C},
+};
+static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
+
+static int conversion_done = 0;
+
+
+int sysmon_init_f (void)
+{
+ sysmon_t ** l;
+ ulong reg;
+
+ /* Power on CCFL, PCMCIA */
+ reg = pic_read (0x60);
+ reg |= 0x09;
+ pic_write (0x60, reg);
+
+ for (l = sysmon_list; *l; l++) {
+ (*l)->init(*l);
+ }
+
+ return 0;
+}
+
+void sysmon_reloc (void)
+{
+ sysmon_t ** l;
+ sysmon_table_t * t;
+
+ for (l = sysmon_list; *l; l++) {
+ RELOC(*l);
+ RELOC((*l)->init);
+ RELOC((*l)->read);
+ }
+
+ for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+ RELOC(t->exec_before);
+ RELOC(t->exec_after);
+ RELOC(t->sysmon);
+ }
+}
+
+static char *sysmon_unit_value (sysmon_table_t *s, uint val)
+{
+ static char buf[32];
+ int unit_val =
+ s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
+ char *p, sign;
+ int dec, frac;
+
+ if (val == -1) {
+ return "I/O ERROR";
+ }
+
+ if (unit_val < 0) {
+ sign = '-';
+ unit_val = -unit_val;
+ } else {
+ sign = '+';
+ }
+
+ p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
+
+
+ frac = unit_val % s->unit_div;
+
+ frac /= (s->unit_div / s->unit_precision);
+
+ dec = s->unit_precision;
+
+ if (dec != 1) {
+ *p++ = '.';
+ }
+ for (dec /= 10; dec != 0; dec /= 10) {
+ *p++ = '0' + (frac / dec) % 10;
+ }
+ strcpy(p, s->unit_name);
+
+ return buf;
+}
+
+static void sysmon_lm87_init (sysmon_t * this)
+{
+ uchar val;
+
+ /* Detect LM87 chip */
+ if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 ||
+ i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) {
+ printf("Error: LM87 not found at 0x%02X\n", this->chip);
+ return;
+ }
+
+ /* Configure pins 5,6 as AIN */
+ val = 0x03;
+ if (i2c_write(this->chip, 0x16, 1, &val, 1)) {
+ printf("Error: can't write LM87 config register\n");
+ return;
+ }
+
+ /* Start monitoring */
+ val = 0x01;
+ if (i2c_write(this->chip, 0x40, 1, &val, 1)) {
+ printf("Error: can't write LM87 config register\n");
+ return;
+ }
+}
+
+static void sysmon_pic_init (sysmon_t * this)
+{
+}
+
+static uint sysmon_i2c_read (sysmon_t * this, uint addr)
+{
+ uchar val;
+ uint res = i2c_read(this->chip, addr, 1, &val, 1);
+
+ return res == 0 ? val : -1;
+}
+
+static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr)
+{
+ uchar val;
+ return i2c_read(this->chip, addr, 1, &val, 1) == 0 ?
+ 128 + (signed char)val : -1;
+}
+
+static void sysmon_ccfl_disable (sysmon_table_t * this)
+{
+ if (!this->val_valid_alt) {
+ sysmon_temp_invalid = 1;
+ }
+}
+
+static void sysmon_ccfl_enable (sysmon_table_t * this)
+{
+ ulong reg;
+
+ if (!sysmon_temp_invalid) {
+ reg = pic_read (0x60);
+ reg |= 0x06;
+ pic_write (0x60, reg);
+ }
+}
+
+int sysmon_post_test (int flags)
+{
+ int res = 0;
+ sysmon_table_t * t;
+ uint val;
+
+ /*
+ * The A/D conversion on the LM87 sensor takes 300 ms.
+ */
+ if (! conversion_done) {
+ while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET ();
+ conversion_done = 1;
+ }
+
+ for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+ if (t->exec_before) {
+ t->exec_before(t);
+ }
+
+ val = t->sysmon->read(t->sysmon, t->addr);
+ if (val != -1) {
+ t->val_valid = val >= t->val_min && val <= t->val_max;
+ t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
+ } else {
+ t->val_valid = 0;
+ t->val_valid_alt = 0;
+ }
+
+ if (t->exec_after) {
+ t->exec_after(t);
+ }
+
+ if ((!t->val_valid) || (flags & POST_MANUAL)) {
+ printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
+ printf("allowed range");
+ printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
+ printf(" %-8s", sysmon_unit_value(t, t->val_max));
+ printf(" %s\n", t->val_valid ? "OK" : "FAIL");
+ }
+
+ if (!t->val_valid) {
+ res = -1;
+ }
+ }
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_SYSMON */
+#endif /* CONFIG_POST */
diff --git a/post/board/netta/Makefile b/post/board/netta/Makefile
new file mode 100644
index 0000000..60c7790
--- /dev/null
+++ b/post/board/netta/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+LIB = libpostnetta.a
+
+COBJS = codec.o dsp.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/board/netta/codec.c b/post/board/netta/codec.c
new file mode 100644
index 0000000..e881752
--- /dev/null
+++ b/post/board/netta/codec.c
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2004
+ * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CODEC test
+ *
+ * This test verifies the connection and performs a memory test
+ * on any connected codec(s). The meat of the work is done
+ * in the board specific function.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_CODEC
+
+extern int board_post_codec(int flags);
+
+int codec_post_test (int flags)
+{
+ return board_post_codec(flags);
+}
+
+#endif /* CONFIG_POST & CFG_POST_CODEC */
+#endif /* CONFIG_POST */
diff --git a/post/board/netta/dsp.c b/post/board/netta/dsp.c
new file mode 100644
index 0000000..63531a2
--- /dev/null
+++ b/post/board/netta/dsp.c
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2004
+ * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * DSP test
+ *
+ * This test verifies the connection and performs a memory test
+ * on any connected DSP(s). The meat of the work is done
+ * in the board specific function.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_DSP
+
+extern int board_post_dsp(int flags);
+
+int dsp_post_test (int flags)
+{
+ return board_post_dsp(flags);
+}
+
+#endif /* CONFIG_POST & CFG_POST_DSP */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/Makefile b/post/cpu/mpc8xx/Makefile
new file mode 100644
index 0000000..9dd3f0f
--- /dev/null
+++ b/post/cpu/mpc8xx/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LIB = libpostmpc8xx.a
+
+AOBJS = cache_8xx.o
+COBJS = ether.o spr.o uart.o usb.o watchdog.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/cpu/mpc8xx/cache_8xx.S b/post/cpu/mpc8xx/cache_8xx.S
new file mode 100644
index 0000000..2d41b55
--- /dev/null
+++ b/post/cpu/mpc8xx/cache_8xx.S
@@ -0,0 +1,495 @@
+/*
+ * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_POST
+#if defined(CONFIG_MPC823) || \
+ defined(CONFIG_MPC850) || \
+ defined(CONFIG_MPC855) || \
+ defined(CONFIG_MPC860) || \
+ defined(CONFIG_MPC862)
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+
+#if CONFIG_POST & CFG_POST_CACHE
+
+ .text
+
+cache_post_dinvalidate:
+ lis r10, IDC_INVALL@h
+ mtspr DC_CST, r10
+ blr
+
+cache_post_iinvalidate:
+ lis r10, IDC_INVALL@h
+ mtspr IC_CST, r10
+ isync
+ blr
+
+cache_post_ddisable:
+ lis r10, IDC_DISABLE@h
+ mtspr DC_CST, r10
+ blr
+
+cache_post_dwb:
+ lis r10, IDC_ENABLE@h
+ mtspr DC_CST, r10
+ lis r10, DC_CFWT@h
+ mtspr DC_CST, r10
+ blr
+
+cache_post_dwt:
+ lis r10, IDC_ENABLE@h
+ mtspr DC_CST, r10
+ lis r10, DC_SFWT@h
+ mtspr DC_CST, r10
+ blr
+
+cache_post_idisable:
+ lis r10, IDC_DISABLE@h
+ mtspr IC_CST, r10
+ isync
+ blr
+
+cache_post_ienable:
+ lis r10, IDC_ENABLE@h
+ mtspr IC_CST, r10
+ isync
+ blr
+
+cache_post_iunlock:
+ lis r10, IDC_UNALL@h
+ mtspr IC_CST, r10
+ isync
+ blr
+
+cache_post_ilock:
+ mtspr IC_ADR, r3
+ lis r10, IDC_LDLCK@h
+ mtspr IC_CST, r10
+ isync
+ blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back or write-through mode
+ * invalidate the data cache
+ * write the negative pattern to a cached area
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+ .global cache_post_test1
+cache_post_test1:
+ mflr r0
+ stw r0, 4(r1)
+
+ stwu r3, -4(r1)
+ stwu r4, -4(r1)
+
+ bl cache_post_dwb
+ bl cache_post_dinvalidate
+
+ /* Write the negative pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0xff
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ /* Read the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ lwz r4, 4(r1)
+ subi r4, r4, 1
+ li r3, 0
+1:
+ lbzu r0, 1(r4)
+ cmpli cr0, r0, 0xff
+ beq 2f
+ li r3, -1
+ b 3f
+2:
+ bdnz 1b
+3:
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ addi r1, r1, 8
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back or write-through mode
+ * invalidate the data cache
+ * write the zero pattern to a cached area
+ * turn off the data cache
+ * write the negative pattern to the area
+ * turn on the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+ .global cache_post_test2
+cache_post_test2:
+ mflr r0
+ stw r0, 4(r1)
+
+ stwu r3, -4(r1)
+ stwu r4, -4(r1)
+
+ bl cache_post_dwb
+ bl cache_post_dinvalidate
+
+ /* Write the zero pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_ddisable
+
+ /* Write the negative pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0xff
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_dwb
+
+ /* Read the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ lwz r4, 4(r1)
+ subi r4, r4, 1
+ li r3, 0
+1:
+ lbzu r0, 1(r4)
+ cmpli cr0, r0, 0xff
+ beq 2f
+ li r3, -1
+ b 3f
+2:
+ bdnz 1b
+3:
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ addi r1, r1, 8
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-through mode
+ * invalidate the data cache
+ * write the zero pattern to a cached area
+ * flush the data cache
+ * write the negative pattern to the area
+ * turn off the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+ .global cache_post_test3
+cache_post_test3:
+ mflr r0
+ stw r0, 4(r1)
+
+ stwu r3, -4(r1)
+ stwu r4, -4(r1)
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ /* Write the zero pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_dwt
+ bl cache_post_dinvalidate
+
+ /* Write the negative pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0xff
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ /* Read the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ lwz r4, 4(r1)
+ subi r4, r4, 1
+ li r3, 0
+1:
+ lbzu r0, 1(r4)
+ cmpli cr0, r0, 0xff
+ beq 2f
+ li r3, -1
+ b 3f
+2:
+ bdnz 1b
+3:
+
+ addi r1, r1, 8
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back mode
+ * invalidate the data cache
+ * write the negative pattern to a cached area
+ * flush the data cache
+ * write the zero pattern to the area
+ * invalidate the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+ .global cache_post_test4
+cache_post_test4:
+ mflr r0
+ stw r0, 4(r1)
+
+ stwu r3, -4(r1)
+ stwu r4, -4(r1)
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ /* Write the negative pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0xff
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_dwb
+ bl cache_post_dinvalidate
+
+ /* Write the zero pattern to the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ li r0, 0
+ lwz r3, 4(r1)
+ subi r3, r3, 1
+1:
+ stbu r0, 1(r3)
+ bdnz 1b
+
+ bl cache_post_ddisable
+ bl cache_post_dinvalidate
+
+ /* Read the test area */
+ lwz r0, 0(r1)
+ mtctr r0
+ lwz r4, 4(r1)
+ subi r4, r4, 1
+ li r3, 0
+1:
+ lbzu r0, 1(r4)
+ cmpli cr0, r0, 0xff
+ beq 2f
+ li r3, -1
+ b 3f
+2:
+ bdnz 1b
+3:
+
+ addi r1, r1, 8
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+cache_post_test5_1:
+ li r3, 0
+cache_post_test5_2:
+ li r3, -1
+
+/*
+ * turn on the instruction cache
+ * unlock the entire instruction cache
+ * invalidate the instruction cache
+ * lock a branch instruction in the instruction cache
+ * replace the branch instruction with "nop"
+ * jump to the branch instruction
+ * check that the branch instruction was executed
+*/
+ .global cache_post_test5
+cache_post_test5:
+ mflr r0
+ stw r0, 4(r1)
+
+ bl cache_post_ienable
+ bl cache_post_iunlock
+ bl cache_post_iinvalidate
+
+ /* Compute r9 = cache_post_test5_reloc */
+ bl cache_post_test5_reloc
+cache_post_test5_reloc:
+ mflr r9
+
+ /* Copy the test instruction to cache_post_test5_data */
+ lis r3, (cache_post_test5_1 - cache_post_test5_reloc)@h
+ ori r3, r3, (cache_post_test5_1 - cache_post_test5_reloc)@l
+ add r3, r3, r9
+ lis r4, (cache_post_test5_data - cache_post_test5_reloc)@h
+ ori r4, r4, (cache_post_test5_data - cache_post_test5_reloc)@l
+ add r4, r4, r9
+ lwz r0, 0(r3)
+ stw r0, 0(r4)
+
+ bl cache_post_iinvalidate
+
+ /* Lock the branch instruction */
+ lis r3, (cache_post_test5_data - cache_post_test5_reloc)@h
+ ori r3, r3, (cache_post_test5_data - cache_post_test5_reloc)@l
+ add r3, r3, r9
+ bl cache_post_ilock
+
+ /* Replace the test instruction */
+ lis r3, (cache_post_test5_2 - cache_post_test5_reloc)@h
+ ori r3, r3, (cache_post_test5_2 - cache_post_test5_reloc)@l
+ add r3, r3, r9
+ lis r4, (cache_post_test5_data - cache_post_test5_reloc)@h
+ ori r4, r4, (cache_post_test5_data - cache_post_test5_reloc)@l
+ add r4, r4, r9
+ lwz r0, 0(r3)
+ stw r0, 0(r4)
+
+ bl cache_post_iinvalidate
+
+ /* Execute to the test instruction */
+cache_post_test5_data:
+ nop
+
+ bl cache_post_iunlock
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+cache_post_test6_1:
+ li r3, -1
+cache_post_test6_2:
+ li r3, 0
+
+/*
+ * turn on the instruction cache
+ * unlock the entire instruction cache
+ * invalidate the instruction cache
+ * lock a branch instruction in the instruction cache
+ * replace the branch instruction with "nop"
+ * jump to the branch instruction
+ * check that the branch instruction was executed
+ */
+ .global cache_post_test6
+cache_post_test6:
+ mflr r0
+ stw r0, 4(r1)
+
+ bl cache_post_ienable
+ bl cache_post_iunlock
+ bl cache_post_iinvalidate
+
+ /* Compute r9 = cache_post_test6_reloc */
+ bl cache_post_test6_reloc
+cache_post_test6_reloc:
+ mflr r9
+
+ /* Copy the test instruction to cache_post_test6_data */
+ lis r3, (cache_post_test6_1 - cache_post_test6_reloc)@h
+ ori r3, r3, (cache_post_test6_1 - cache_post_test6_reloc)@l
+ add r3, r3, r9
+ lis r4, (cache_post_test6_data - cache_post_test6_reloc)@h
+ ori r4, r4, (cache_post_test6_data - cache_post_test6_reloc)@l
+ add r4, r4, r9
+ lwz r0, 0(r3)
+ stw r0, 0(r4)
+
+ bl cache_post_iinvalidate
+
+ /* Replace the test instruction */
+ lis r3, (cache_post_test6_2 - cache_post_test6_reloc)@h
+ ori r3, r3, (cache_post_test6_2 - cache_post_test6_reloc)@l
+ add r3, r3, r9
+ lis r4, (cache_post_test6_data - cache_post_test6_reloc)@h
+ ori r4, r4, (cache_post_test6_data - cache_post_test6_reloc)@l
+ add r4, r4, r9
+ lwz r0, 0(r3)
+ stw r0, 0(r4)
+
+ bl cache_post_iinvalidate
+
+ /* Execute to the test instruction */
+cache_post_test6_data:
+ nop
+
+ lwz r0, 4(r1)
+ mtlr r0
+ blr
+
+#endif /* CONFIG_MPC823 || MPC850 || MPC855 || MPC860 */
+#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
new file mode 100644
index 0000000..8c87b59
--- /dev/null
+++ b/post/cpu/mpc8xx/ether.c
@@ -0,0 +1,631 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Serial Communication Controllers (SCC) listed in ctlr_list array below
+ * are tested in the loopback ethernet mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ * MIN_PACKET_LENGTH - minimum size of packet to transmit
+ * MAX_PACKET_LENGTH - maximum size of packet to transmit
+ * TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#if CONFIG_POST & CFG_POST_ETHER
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+
+#include <command.h>
+#include <net.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MIN_PACKET_LENGTH 64
+#define MAX_PACKET_LENGTH 256
+#define TEST_NUM 1
+
+#define CTLR_SCC 0
+
+extern void spi_init_f (void);
+extern void spi_init_r (void);
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] = { {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+ void (*init) (int index);
+ void (*halt) (int index);
+ int (*send) (int index, volatile void *packet, int length);
+ int (*recv) (int index, void *packet, int length);
+} ctlr_proc[1];
+
+static char *ctlr_name[1] = { "SCC" };
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+ /*
+ * SCC callbacks
+ */
+
+static void scc_init (int scc_index)
+{
+ bd_t *bd = gd->bd;
+
+ static int proff[] =
+ { PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+ static unsigned int cpm_cr[] =
+ { CPM_CR_CH_SCC1, CPM_CR_CH_SCC2, CPM_CR_CH_SCC3,
+CPM_CR_CH_SCC4 };
+
+ int i;
+ scc_enet_t *pram_ptr;
+
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#if defined(CONFIG_FADS)
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
+ /* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
+ *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#else
+ *((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif
+#endif
+
+ pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[proff[scc_index]]);
+
+ rxIdx = 0;
+ txIdx = 0;
+
+#ifdef CFG_ALLOC_DPRAM
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+ dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+
+#if 0
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+ /* Configure port A pins for Txd and Rxd.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+ /* Configure port B pins for Txd and Rxd.
+ */
+ immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+ /* Configure port C pins to disable External Loopback
+ */
+ immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
+ immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port A for TCLK and RCLK.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+ /*
+ * Configure Serial Interface clock routing -- see section 16.7.5.3
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+
+ immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
+ immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
+#else
+ /*
+ * SCC2 receive clock is BRG2
+ * SCC2 transmit clock is BRG3
+ */
+ immr->im_cpm.cp_brgc2 = 0x0001000C;
+ immr->im_cpm.cp_brgc3 = 0x0001000C;
+
+ immr->im_cpm.cp_sicr &= ~0x00003F00;
+ immr->im_cpm.cp_sicr |= 0x00000a00;
+#endif /* 0 */
+
+
+ /*
+ * Initialize SDCR -- see section 16.9.23.7
+ * SDMA configuration register
+ */
+ immr->im_siu_conf.sc_sdcr = 0x01;
+
+
+ /*
+ * Setup SCC Ethernet Parameter RAM
+ */
+
+ pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
+ pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
+
+ pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
+
+ pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
+ pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
+
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
+ */
+
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc =
+ (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /*
+ * Enter Command: Initialize Rx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_RX << 8) | (cpm_cr[scc_index] << 4) |
+ CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Ethernet Specific Parameter RAM
+ * see table 13-16, pg. 660,
+ * pg. 681 (example with suggested settings)
+ */
+
+ pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
+ pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
+ pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
+ pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
+ pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
+ pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
+
+ pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
+ pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
+ pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
+
+ pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
+ pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
+
+ pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
+ pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
+ pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
+ pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
+
+#define ea bd->bi_enetaddr
+ pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+ pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
+ pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
+ pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
+ pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
+ pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
+ pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
+ pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
+ pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
+
+ /*
+ * Enter Command: Initialize Tx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_TX << 8) | (cpm_cr[scc_index] << 4) |
+ CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Mask all Events in SCCM - we use polling mode
+ */
+ immr->im_cpm.cp_scc[scc_index].scc_sccm = 0;
+
+ /*
+ * Clear Events in SCCE -- Clear bits by writing 1's
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_scce = ~(0x0);
+
+
+ /*
+ * Initialize GSMR High 32-Bits
+ * Settings: Normal Mode
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrh = 0;
+
+ /*
+ * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
+ * Settings:
+ * TCI = Invert
+ * TPL = 48 bits
+ * TPP = Repeating 10's
+ * LOOP = Loopback
+ * MODE = Ethernet
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
+ SCC_GSMRL_TPL_48 |
+ SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_DIAG_LOOP |
+ SCC_GSMRL_MODE_ENET);
+
+ /*
+ * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_dsr = 0xd555;
+
+ /*
+ * Initialize the PSMR
+ * Settings:
+ * CRC = 32-Bit CCITT
+ * NIB = Begin searching for SFD 22 bits after RENA
+ * LPB = Loopback Enable (Needed when FDE is set)
+ */
+ immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
+ SCC_PSMR_NIB22 | SCC_PSMR_LPB;
+
+#if 0
+ /*
+ * Configure Ethernet TENA Signal
+ */
+
+#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
+ immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
+ immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
+ immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
+ immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
+#endif
+
+#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
+ /*
+ * Port C is used to control the PHY,MC68160.
+ */
+ immr->im_ioport.iop_pcdir |=
+ (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
+ immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif /* MPC860ADS */
+
+#if defined(CONFIG_AMX860)
+ /*
+ * Port B is used to control the PHY,MC68160.
+ */
+ immr->im_cpm.cp_pbdir |=
+ (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
+
+ immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
+ immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
+ immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
+#endif /* AMX860 */
+
+#endif /* 0 */
+
+#ifdef CONFIG_RPXCLASSIC
+ *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
+ *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
+#endif
+
+#ifdef CONFIG_RPXLITE
+ *((uchar *) BCSR0) |= BCSR0_ETHEN;
+#endif
+
+#ifdef CONFIG_MBX
+ board_ether_init ();
+#endif
+
+ /*
+ * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl |=
+ (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /*
+ * Work around transmit problem with first eth packet
+ */
+#if defined (CONFIG_FADS)
+ udelay (10000); /* wait 10 ms */
+#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+ udelay (100000); /* wait 100 ms */
+#endif
+}
+
+static void scc_halt (int scc_index)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+}
+
+static int scc_send (int index, volatile void *packet, int length)
+{
+ int i, j = 0;
+
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf ("TX not ready\n");
+ rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |=
+ (BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP);
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf ("TX timeout\n");
+ i = (rtx->txbd[txIdx].
+ cbd_sc & BD_ENET_TX_STATS) /* return only status bits */ ;
+ return i;
+}
+
+static int scc_recv (int index, void *packet, int max_length)
+{
+ int length = -1;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ goto Done; /* nothing received */
+ }
+
+ if (!(rtx->rxbd[rxIdx].cbd_sc & 0x003f)) {
+ length = rtx->rxbd[rxIdx].cbd_datlen - 4;
+ memcpy (packet,
+ (void *) (NetRxPackets[rxIdx]),
+ length < max_length ? length : max_length);
+ }
+
+ /* Give the buffer back to the SCC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+Done:
+ return length;
+}
+
+ /*
+ * Test routines
+ */
+
+static void packet_fill (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ packet[0] = 0xFF;
+ packet[1] = 0xFF;
+ packet[2] = 0xFF;
+ packet[3] = 0xFF;
+ packet[4] = 0xFF;
+ packet[5] = 0xFF;
+
+ for (i = 6; i < length; i++) {
+ packet[i] = c++;
+ }
+}
+
+static int packet_check (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 6; i < length; i++) {
+ if (packet[i] != c++)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int test_ctlr (int ctlr, int index)
+{
+ int res = -1;
+ char packet_send[MAX_PACKET_LENGTH];
+ char packet_recv[MAX_PACKET_LENGTH];
+ int length;
+ int i;
+ int l;
+
+ ctlr_proc[ctlr].init (index);
+
+ for (i = 0; i < TEST_NUM; i++) {
+ for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+ packet_fill (packet_send, l);
+
+ ctlr_proc[ctlr].send (index, packet_send, l);
+
+ length = ctlr_proc[ctlr].recv (index, packet_recv,
+ MAX_PACKET_LENGTH);
+
+ if (length != l || packet_check (packet_recv, length) < 0) {
+ goto Done;
+ }
+ }
+ }
+
+ res = 0;
+
+Done:
+
+ ctlr_proc[ctlr].halt (index);
+
+ /*
+ * SCC2 Ethernet parameter RAM space overlaps
+ * the SPI parameter RAM space. So we need to restore
+ * the SPI configuration after SCC2 ethernet test.
+ */
+#if defined(CONFIG_SPI)
+ if (ctlr == CTLR_SCC && index == 1) {
+ spi_init_f ();
+ spi_init_r ();
+ }
+#endif
+
+ if (res != 0) {
+ post_log ("ethernet %s%d test failed\n", ctlr_name[ctlr],
+ index + 1);
+ }
+
+ return res;
+}
+
+int ether_post_test (int flags)
+{
+ int res = 0;
+ int i;
+
+ ctlr_proc[CTLR_SCC].init = scc_init;
+ ctlr_proc[CTLR_SCC].halt = scc_halt;
+ ctlr_proc[CTLR_SCC].send = scc_send;
+ ctlr_proc[CTLR_SCC].recv = scc_recv;
+
+ for (i = 0; i < CTRL_LIST_SIZE; i++) {
+ if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+ res = -1;
+ }
+ }
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_ETHER */
+
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/spr.c b/post/cpu/mpc8xx/spr.c
new file mode 100644
index 0000000..330b977
--- /dev/null
+++ b/post/cpu/mpc8xx/spr.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * SPR test
+ *
+ * The test checks the contents of Special Purpose Registers (SPR) listed
+ * in the spr_test_list array below.
+ * Each SPR value is read using mfspr instruction, some bits are masked
+ * according to the table and the resulting value is compared to the
+ * corresponding table value.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_SPR
+
+static struct
+{
+ int number;
+ char * name;
+ unsigned long mask;
+ unsigned long value;
+} spr_test_list [] = {
+ /* Standard Special-Purpose Registers */
+
+ {1, "XER", 0x00000000, 0x00000000},
+ {8, "LR", 0x00000000, 0x00000000},
+ {9, "CTR", 0x00000000, 0x00000000},
+ {18, "DSISR", 0x00000000, 0x00000000},
+ {19, "DAR", 0x00000000, 0x00000000},
+ {22, "DEC", 0x00000000, 0x00000000},
+ {26, "SRR0", 0x00000000, 0x00000000},
+ {27, "SRR1", 0x00000000, 0x00000000},
+ {272, "SPRG0", 0x00000000, 0x00000000},
+ {273, "SPRG1", 0x00000000, 0x00000000},
+ {274, "SPRG2", 0x00000000, 0x00000000},
+ {275, "SPRG3", 0x00000000, 0x00000000},
+ {287, "PVR", 0xFFFF0000, 0x00500000},
+
+ /* Additional Special-Purpose Registers */
+
+ {144, "CMPA", 0x00000000, 0x00000000},
+ {145, "CMPB", 0x00000000, 0x00000000},
+ {146, "CMPC", 0x00000000, 0x00000000},
+ {147, "CMPD", 0x00000000, 0x00000000},
+ {148, "ICR", 0xFFFFFFFF, 0x00000000},
+ {149, "DER", 0x00000000, 0x00000000},
+ {150, "COUNTA", 0xFFFFFFFF, 0x00000000},
+ {151, "COUNTB", 0xFFFFFFFF, 0x00000000},
+ {152, "CMPE", 0x00000000, 0x00000000},
+ {153, "CMPF", 0x00000000, 0x00000000},
+ {154, "CMPG", 0x00000000, 0x00000000},
+ {155, "CMPH", 0x00000000, 0x00000000},
+ {156, "LCTRL1", 0xFFFFFFFF, 0x00000000},
+ {157, "LCTRL2", 0xFFFFFFFF, 0x00000000},
+ {158, "ICTRL", 0xFFFFFFFF, 0x00000007},
+ {159, "BAR", 0x00000000, 0x00000000},
+ {630, "DPDR", 0x00000000, 0x00000000},
+ {631, "DPIR", 0x00000000, 0x00000000},
+ {638, "IMMR", 0xFFFF0000, CFG_IMMR },
+ {560, "IC_CST", 0x8E380000, 0x00000000},
+ {561, "IC_ADR", 0x00000000, 0x00000000},
+ {562, "IC_DAT", 0x00000000, 0x00000000},
+ {568, "DC_CST", 0xEF380000, 0x00000000},
+ {569, "DC_ADR", 0x00000000, 0x00000000},
+ {570, "DC_DAT", 0x00000000, 0x00000000},
+ {784, "MI_CTR", 0xFFFFFFFF, 0x00000000},
+ {786, "MI_AP", 0x00000000, 0x00000000},
+ {787, "MI_EPN", 0x00000000, 0x00000000},
+ {789, "MI_TWC", 0xFFFFFE02, 0x00000000},
+ {790, "MI_RPN", 0x00000000, 0x00000000},
+ {816, "MI_DBCAM", 0x00000000, 0x00000000},
+ {817, "MI_DBRAM0", 0x00000000, 0x00000000},
+ {818, "MI_DBRAM1", 0x00000000, 0x00000000},
+ {792, "MD_CTR", 0xFFFFFFFF, 0x04000000},
+ {793, "M_CASID", 0xFFFFFFF0, 0x00000000},
+ {794, "MD_AP", 0x00000000, 0x00000000},
+ {795, "MD_EPN", 0x00000000, 0x00000000},
+ {796, "M_TWB", 0x00000003, 0x00000000},
+ {797, "MD_TWC", 0x00000003, 0x00000000},
+ {798, "MD_RPN", 0x00000000, 0x00000000},
+ {799, "M_TW", 0x00000000, 0x00000000},
+ {824, "MD_DBCAM", 0x00000000, 0x00000000},
+ {825, "MD_DBRAM0", 0x00000000, 0x00000000},
+ {826, "MD_DBRAM1", 0x00000000, 0x00000000},
+};
+
+static int spr_test_list_size =
+ sizeof (spr_test_list) / sizeof (spr_test_list[0]);
+
+int spr_post_test (int flags)
+{
+ int ret = 0;
+ int ic = icache_status ();
+ int i;
+
+ unsigned long code[] = {
+ 0x7c6002a6, /* mfspr r3,SPR */
+ 0x4e800020 /* blr */
+ };
+ unsigned long (*get_spr) (void) = (void *) code;
+
+ if (ic)
+ icache_disable ();
+
+ for (i = 0; i < spr_test_list_size; i++) {
+ int num = spr_test_list[i].number;
+
+ /* mfspr r3,num */
+ code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
+
+ if ((get_spr () & spr_test_list[i].mask) !=
+ (spr_test_list[i].value & spr_test_list[i].mask)) {
+ post_log ("The value of %s special register "
+ "is incorrect: 0x%08X\n",
+ spr_test_list[i].name, get_spr ());
+ ret = -1;
+ }
+ }
+
+ if (ic)
+ icache_enable ();
+
+ return ret;
+}
+#endif /* CONFIG_POST & CFG_POST_SPR */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c
new file mode 100644
index 0000000..fd97e38
--- /dev/null
+++ b/post/cpu/mpc8xx/uart.c
@@ -0,0 +1,560 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The Serial Management Controllers (SMC) and the Serial Communication
+ * Controllers (SCC) listed in ctlr_list array below are tested in
+ * the loopback UART mode.
+ * The controllers are configured accordingly and several characters
+ * are transmitted. The configurable test parameters are:
+ * MIN_PACKET_LENGTH - minimum size of packet to transmit
+ * MAX_PACKET_LENGTH - maximum size of packet to transmit
+ * TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#if CONFIG_POST & CFG_POST_UART
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+#include <command.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CTLR_SMC 0
+#define CTLR_SCC 1
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] =
+ { {CTLR_SMC, 0}, {CTLR_SMC, 1}, {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+ void (*init) (int index);
+ void (*halt) (int index);
+ void (*putc) (int index, const char c);
+ int (*getc) (int index);
+} ctlr_proc[2];
+
+static char *ctlr_name[2] = { "SMC", "SCC" };
+
+static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
+static int proff_scc[] =
+ { PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+
+/*
+ * SMC callbacks
+ */
+
+static void smc_init (int smc_index)
+{
+ static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
+
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ uint dpaddr;
+
+ /* initialize pointers to SMC */
+
+ sp = (smc_t *) & (cp->cp_smc[smc_index]);
+ up = (smc_uart_t *) & cp->cp_dparam[proff_smc[smc_index]];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* Enable SDMA.
+ */
+ im->im_siu_conf.sc_sdcr = 1;
+
+ /* clear error conditions */
+#ifdef CFG_SDSR
+ im->im_sdma.sdma_sdsr = CFG_SDSR;
+#else
+ im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+ /* clear SDMA interrupt mask */
+#ifdef CFG_SDMR
+ im->im_sdma.sdma_sdmr = CFG_SDMR;
+#else
+ im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+#if defined(CONFIG_FADS)
+ /* Enable RS232 */
+ *((uint *) BCSR1) &=
+ ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2);
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+ /* Enable Monitor Port Transceiver */
+ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR;
+#endif
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+#ifdef CFG_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+ dpaddr = CPM_POST_BASE;
+#endif
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * For now, this address seems OK, but it may have to
+ * change with newer versions of the firmware.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->smc_rbase = dpaddr;
+ up->smc_tbase = dpaddr + sizeof (cbd_t);
+ up->smc_rfcr = SMC_EB;
+ up->smc_tfcr = SMC_EB;
+
+#if defined(CONFIG_MBX)
+ board_serial_init ();
+#endif
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ * Set local loopback mode.
+ */
+ sp->smc_smcmr = smcr_mk_clen (9) | SMCMR_SM_UART | (ushort) 0x0004;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ /* Set up the baud rate generator.
+ */
+ cp->cp_simode = 0x00000000;
+
+ cp->cp_brgc1 =
+ (((gd->cpu_clk / 16 / gd->baudrate) -
+ 1) << 1) | CPM_BRG_EN;
+
+ /* Make the first buffer the only buffer.
+ */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Single character receive.
+ */
+ up->smc_mrblr = 1;
+ up->smc_maxidl = 0;
+
+ /* Initialize Tx/Rx parameters.
+ */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr =
+ mk_cr_cmd (cpm_cr_ch[smc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+}
+
+static void smc_halt(int smc_index)
+{
+}
+
+static void smc_putc (int smc_index, const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+ up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+ tbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_tbase];
+
+ /* Wait for last character to go.
+ */
+
+ buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+ __asm__ ("eieio");
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+ __asm__ ("eieio");
+#if 1
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+}
+
+static int smc_getc (int smc_index)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ unsigned char c;
+ int i;
+
+ up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+ rbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_rbase];
+
+ /* Wait for character to show up.
+ */
+ buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+ while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+ for (i = 100; i > 0; i--) {
+ if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+ break;
+ udelay (1000);
+ }
+
+ if (i == 0)
+ return -1;
+#endif
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+ /*
+ * SCC callbacks
+ */
+
+static void scc_init (int scc_index)
+{
+ static int cpm_cr_ch[] = {
+ CPM_CR_CH_SCC1,
+ CPM_CR_CH_SCC2,
+ CPM_CR_CH_SCC3,
+ CPM_CR_CH_SCC4,
+ };
+
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ uint dpaddr;
+
+ /* initialize pointers to SCC */
+
+ sp = (scc_t *) & (cp->cp_scc[scc_index]);
+ up = (scc_uart_t *) & cp->cp_dparam[proff_scc[scc_index]];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ */
+
+#ifdef CFG_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+ dpaddr = CPM_POST_BASE;
+#endif
+
+ /* Enable SDMA.
+ */
+ im->im_siu_conf.sc_sdcr = 0x0001;
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+ rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the baud rate generator.
+ */
+ cp->cp_sicr &= ~(0x000000FF << (8 * scc_index));
+ /* no |= needed, since BRG1 is 000 */
+
+ cp->cp_brgc1 =
+ (((gd->cpu_clk / 16 / gd->baudrate) -
+ 1) << 1) | CPM_BRG_EN;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr + sizeof (cbd_t);
+
+ /* Initialize Tx/Rx parameters.
+ */
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+ cp->cp_cpcr =
+ mk_cr_cmd (cpm_cr_ch[scc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
+ up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
+
+ up->scc_genscc.scc_mrblr = 1; /* Single character receive */
+ up->scc_maxidl = 0; /* disable max idle */
+ up->scc_brkcr = 1; /* send one break character on stop TX */
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = 0x8000;
+ up->scc_char2 = 0x8000;
+ up->scc_char3 = 0x8000;
+ up->scc_char4 = 0x8000;
+ up->scc_char5 = 0x8000;
+ up->scc_char6 = 0x8000;
+ up->scc_char7 = 0x8000;
+ up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Set low latency / small fifo.
+ */
+ sp->scc_gsmrh = SCC_GSMRH_RFW;
+
+ /* Set UART mode
+ */
+ sp->scc_gsmrl &= ~0xF;
+ sp->scc_gsmrl |= SCC_GSMRL_MODE_UART;
+
+ /* Set local loopback mode.
+ */
+ sp->scc_gsmrl &= ~SCC_GSMRL_DIAG_LE;
+ sp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+
+ /* Set clock divider 16 on Tx and Rx
+ */
+ sp->scc_gsmrl |= (SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ sp->scc_psmr |= SCU_PSMR_CL;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->scc_sccm = 0;
+ sp->scc_scce = 0xffff;
+ sp->scc_dsr = 0x7e7e;
+ sp->scc_psmr = 0x3000;
+
+ /* Make the first buffer the only buffer.
+ */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void scc_halt(int scc_index)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile scc_t *sp = (scc_t *) & (cp->cp_scc[scc_index]);
+
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT | SCC_GSMRL_DIAG_LE);
+}
+
+static void scc_putc (int scc_index, const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+ up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+ tbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
+
+ /* Wait for last character to go.
+ */
+
+ buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+ __asm__ ("eieio");
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+ __asm__ ("eieio");
+#if 1
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+}
+
+static int scc_getc (int scc_index)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ unsigned char c;
+ int i;
+
+ up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+ rbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+ /* Wait for character to show up.
+ */
+ buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+ while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+ for (i = 100; i > 0; i--) {
+ if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+ break;
+ udelay (1000);
+ }
+
+ if (i == 0)
+ return -1;
+#endif
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+ /*
+ * Test routines
+ */
+
+static int test_ctlr (int ctlr, int index)
+{
+ int res = -1;
+ char test_str[] = "*** UART Test String ***\r\n";
+ int i;
+
+ ctlr_proc[ctlr].init (index);
+
+ for (i = 0; i < sizeof (test_str) - 1; i++) {
+ ctlr_proc[ctlr].putc (index, test_str[i]);
+ if (ctlr_proc[ctlr].getc (index) != test_str[i])
+ goto Done;
+ }
+
+ res = 0;
+
+Done:
+ ctlr_proc[ctlr].halt (index);
+
+ if (res != 0) {
+ post_log ("uart %s%d test failed\n",
+ ctlr_name[ctlr], index + 1);
+ }
+
+ return res;
+}
+
+int uart_post_test (int flags)
+{
+ int res = 0;
+ int i;
+
+ ctlr_proc[CTLR_SMC].init = smc_init;
+ ctlr_proc[CTLR_SMC].halt = smc_halt;
+ ctlr_proc[CTLR_SMC].putc = smc_putc;
+ ctlr_proc[CTLR_SMC].getc = smc_getc;
+
+ ctlr_proc[CTLR_SCC].init = scc_init;
+ ctlr_proc[CTLR_SCC].halt = scc_halt;
+ ctlr_proc[CTLR_SCC].putc = scc_putc;
+ ctlr_proc[CTLR_SCC].getc = scc_getc;
+
+ for (i = 0; i < CTRL_LIST_SIZE; i++) {
+ if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+ res = -1;
+ }
+ }
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_UART */
+
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/usb.c b/post/cpu/mpc8xx/usb.c
new file mode 100644
index 0000000..0c74cfa
--- /dev/null
+++ b/post/cpu/mpc8xx/usb.c
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * USB test
+ *
+ * The USB controller is tested in the local loopback mode.
+ * It is configured so that endpoint 0 operates as host and endpoint 1
+ * operates as function endpoint. After that an IN token transaction
+ * is performed.
+ * Refer to MPC850 User Manual, Section 32.11.1 USB Host Controller
+ * Initialization Example.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_USB
+
+#include <commproc.h>
+#include <command.h>
+
+#define TOUT_LOOP 100
+
+#define PROFF_USB ((uint)0x0000)
+
+#define CPM_USB_EP0_BASE 0x0a00
+#define CPM_USB_EP1_BASE 0x0a20
+
+#define CPM_USB_DT0_BASE 0x0a80
+#define CPM_USB_DT1_BASE 0x0a90
+#define CPM_USB_DR0_BASE 0x0aa0
+#define CPM_USB_DR1_BASE 0x0ab0
+
+#define CPM_USB_RX0_BASE 0x0b00
+#define CPM_USB_RX1_BASE 0x0b08
+#define CPM_USB_TX0_BASE 0x0b20
+#define CPM_USB_TX1_BASE 0x0b28
+
+#define USB_EXPECT(x) if (!(x)) goto Done;
+
+typedef struct usb_param {
+ ushort ep0ptr;
+ ushort ep1ptr;
+ ushort ep2ptr;
+ ushort ep3ptr;
+ uint rstate;
+ uint rptr;
+ ushort frame_n;
+ ushort rbcnt;
+ ushort rtemp;
+} usb_param_t;
+
+typedef struct usb_param_block {
+ ushort rbase;
+ ushort tbase;
+ uchar rfcr;
+ uchar tfcr;
+ ushort mrblr;
+ ushort rbptr;
+ ushort tbptr;
+ uint tstate;
+ uint tptr;
+ ushort tcrc;
+ ushort tbcnt;
+ uint res[2];
+} usb_param_block_t;
+
+typedef struct usb {
+ uchar usmod;
+ uchar usadr;
+ uchar uscom;
+ uchar res1;
+ ushort usep[4];
+ uchar res2[4];
+ ushort usber;
+ uchar res3[2];
+ ushort usbmr;
+ uchar res4;
+ uchar usbs;
+ uchar res5[8];
+} usb_t;
+
+int usb_post_test (int flags)
+{
+ int res = -1;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile usb_param_t *pram_ptr;
+ uint dpram;
+ ushort DPRAM;
+ volatile cbd_t *tx;
+ volatile cbd_t *rx;
+ volatile usb_t *usbr;
+ volatile usb_param_block_t *ep0;
+ volatile usb_param_block_t *ep1;
+ int j;
+
+ pram_ptr = (usb_param_t *) & (im->im_cpm.cp_dparam[PROFF_USB]);
+ dpram = (uint) im->im_cpm.cp_dpmem;
+ DPRAM = dpram;
+ tx = (cbd_t *) (dpram + CPM_USB_TX0_BASE);
+ rx = (cbd_t *) (dpram + CPM_USB_RX0_BASE);
+ ep0 = (usb_param_block_t *) (dpram + CPM_USB_EP0_BASE);
+ ep1 = (usb_param_block_t *) (dpram + CPM_USB_EP1_BASE);
+ usbr = (usb_t *) & (im->im_cpm.cp_scc[0]);
+
+ /* 01 */
+ im->im_ioport.iop_padir &= ~(ushort) 0x0200;
+ im->im_ioport.iop_papar |= (ushort) 0x0200;
+
+ cp->cp_sicr &= ~0x000000FF;
+ cp->cp_sicr |= 0x00000018;
+
+ cp->cp_brgc4 = 0x00010001;
+
+ /* 02 */
+ im->im_ioport.iop_padir &= ~(ushort) 0x0002;
+ im->im_ioport.iop_padir &= ~(ushort) 0x0001;
+
+ im->im_ioport.iop_papar |= (ushort) 0x0002;
+ im->im_ioport.iop_papar |= (ushort) 0x0001;
+
+ /* 03 */
+ im->im_ioport.iop_pcdir &= ~(ushort) 0x0020;
+ im->im_ioport.iop_pcdir &= ~(ushort) 0x0010;
+
+ im->im_ioport.iop_pcpar &= ~(ushort) 0x0020;
+ im->im_ioport.iop_pcpar &= ~(ushort) 0x0010;
+
+ im->im_ioport.iop_pcso |= (ushort) 0x0020;
+ im->im_ioport.iop_pcso |= (ushort) 0x0010;
+
+ /* 04 */
+ im->im_ioport.iop_pcdir |= (ushort) 0x0200;
+ im->im_ioport.iop_pcdir |= (ushort) 0x0100;
+
+ im->im_ioport.iop_pcpar |= (ushort) 0x0200;
+ im->im_ioport.iop_pcpar |= (ushort) 0x0100;
+
+ /* 05 */
+ pram_ptr->frame_n = 0;
+
+ /* 06 */
+ pram_ptr->ep0ptr = DPRAM + CPM_USB_EP0_BASE;
+ pram_ptr->ep1ptr = DPRAM + CPM_USB_EP1_BASE;
+
+ /* 07-10 */
+ tx[0].cbd_sc = 0xB800;
+ tx[0].cbd_datlen = 3;
+ tx[0].cbd_bufaddr = dpram + CPM_USB_DT0_BASE;
+
+ tx[1].cbd_sc = 0xBC80;
+ tx[1].cbd_datlen = 3;
+ tx[1].cbd_bufaddr = dpram + CPM_USB_DT1_BASE;
+
+ rx[0].cbd_sc = 0xA000;
+ rx[0].cbd_datlen = 0;
+ rx[0].cbd_bufaddr = dpram + CPM_USB_DR0_BASE;
+
+ rx[1].cbd_sc = 0xA000;
+ rx[1].cbd_datlen = 0;
+ rx[1].cbd_bufaddr = dpram + CPM_USB_DR1_BASE;
+
+ /* 11-12 */
+ *(volatile int *) (dpram + CPM_USB_DT0_BASE) = 0x69856000;
+ *(volatile int *) (dpram + CPM_USB_DT1_BASE) = 0xABCD1234;
+
+ *(volatile int *) (dpram + CPM_USB_DR0_BASE) = 0;
+ *(volatile int *) (dpram + CPM_USB_DR1_BASE) = 0;
+
+ /* 13-16 */
+ ep0->rbase = DPRAM + CPM_USB_RX0_BASE;
+ ep0->tbase = DPRAM + CPM_USB_TX0_BASE;
+ ep0->rfcr = 0x18;
+ ep0->tfcr = 0x18;
+ ep0->mrblr = 0x100;
+ ep0->rbptr = DPRAM + CPM_USB_RX0_BASE;
+ ep0->tbptr = DPRAM + CPM_USB_TX0_BASE;
+ ep0->tstate = 0;
+
+ /* 17-20 */
+ ep1->rbase = DPRAM + CPM_USB_RX1_BASE;
+ ep1->tbase = DPRAM + CPM_USB_TX1_BASE;
+ ep1->rfcr = 0x18;
+ ep1->tfcr = 0x18;
+ ep1->mrblr = 0x100;
+ ep1->rbptr = DPRAM + CPM_USB_RX1_BASE;
+ ep1->tbptr = DPRAM + CPM_USB_TX1_BASE;
+ ep1->tstate = 0;
+
+ /* 21-24 */
+ usbr->usep[0] = 0x0000;
+ usbr->usep[1] = 0x1100;
+ usbr->usep[2] = 0x2200;
+ usbr->usep[3] = 0x3300;
+
+ /* 25 */
+ usbr->usmod = 0x06;
+
+ /* 26 */
+ usbr->usadr = 0x05;
+
+ /* 27 */
+ usbr->uscom = 0;
+
+ /* 28 */
+ usbr->usmod |= 0x01;
+ udelay (1);
+
+ /* 29-30 */
+ usbr->uscom = 0x80;
+ usbr->uscom = 0x81;
+
+ /* Wait for the data packet to be transmitted */
+ for (j = 0; j < TOUT_LOOP; j++) {
+ if (tx[1].cbd_sc & (ushort) 0x8000)
+ udelay (1);
+ else
+ break;
+ }
+
+ USB_EXPECT (j < TOUT_LOOP);
+
+ USB_EXPECT (tx[0].cbd_sc == 0x3800);
+ USB_EXPECT (tx[0].cbd_datlen == 3);
+
+ USB_EXPECT (tx[1].cbd_sc == 0x3C80);
+ USB_EXPECT (tx[1].cbd_datlen == 3);
+
+ USB_EXPECT (rx[0].cbd_sc == 0x2C00);
+ USB_EXPECT (rx[0].cbd_datlen == 5);
+
+ USB_EXPECT (*(volatile int *) (dpram + CPM_USB_DR0_BASE) ==
+ 0xABCD122B);
+ USB_EXPECT (*(volatile char *) (dpram + CPM_USB_DR0_BASE + 4) == 0x42);
+
+ res = 0;
+ Done:
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_USB */
+
+#endif /* CONFIG_POST */
diff --git a/post/cpu/mpc8xx/watchdog.c b/post/cpu/mpc8xx/watchdog.c
new file mode 100644
index 0000000..48c4282
--- /dev/null
+++ b/post/cpu/mpc8xx/watchdog.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Watchdog test
+ *
+ * The test verifies the watchdog timer operation.
+ * On the first iteration, the test routine disables interrupts and
+ * makes a 10-second delay. If the system does not reboot during this delay,
+ * the watchdog timer is not operational and the test fails. If the system
+ * reboots, on the second iteration the test routine reports a success.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CFG_POST_WATCHDOG
+
+static ulong gettbl (void)
+{
+ ulong r;
+
+ asm ("mftbl %0":"=r" (r));
+
+ return r;
+}
+
+int watchdog_post_test (int flags)
+{
+ if (flags & POST_REBOOT) {
+ /* Test passed */
+
+ return 0;
+ } else {
+ /* 10-second delay */
+ int ints = disable_interrupts ();
+ ulong base = gettbl ();
+ ulong clk = get_tbclk ();
+
+ while ((gettbl () - base) / 10 < clk);
+
+ if (ints)
+ enable_interrupts ();
+
+ /*
+ * If we have reached this point, the watchdog timer
+ * does not work
+ */
+ return -1;
+ }
+}
+
+#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST */
diff --git a/post/drivers/Makefile b/post/drivers/Makefile
new file mode 100644
index 0000000..068fa98
--- /dev/null
+++ b/post/drivers/Makefile
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+SUBDIRS =
+
+LIB = libpostdrivers.a
+
+COBJS = cache.o i2c.o memory.o rtc.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/drivers/cache.c b/post/drivers/cache.c
new file mode 100644
index 0000000..501465c
--- /dev/null
+++ b/post/drivers/cache.c
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Cache test
+ *
+ * This test verifies the CPU data and instruction cache using
+ * several test scenarios.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CFG_POST_CACHE
+
+#define CACHE_POST_SIZE 1024
+
+extern int cache_post_test1 (char *, unsigned int);
+extern int cache_post_test2 (char *, unsigned int);
+extern int cache_post_test3 (char *, unsigned int);
+extern int cache_post_test4 (char *, unsigned int);
+extern int cache_post_test5 (void);
+extern int cache_post_test6 (void);
+
+int cache_post_test (int flags)
+{
+ int ints = disable_interrupts ();
+ int res = 0;
+ static char ta[CACHE_POST_SIZE + 0xf];
+ char *testarea = (char *) (((unsigned long) ta + 0xf) & ~0xf);
+
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test1 (testarea, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test2 (testarea, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test3 (testarea, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test4 (testarea, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test5 ();
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test6 ();
+
+ WATCHDOG_RESET ();
+ if (ints)
+ enable_interrupts ();
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST */
diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c
new file mode 100644
index 0000000..1b2e644
--- /dev/null
+++ b/post/drivers/i2c.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+/*
+ * I2C test
+ *
+ * For verifying the I2C bus, a full I2C bus scanning is performed.
+ *
+ * #ifdef I2C_ADDR_LIST
+ * The test is considered as passed if all the devices and
+ * only the devices in the list are found.
+ * #else [ ! I2C_ADDR_LIST ]
+ * The test is considered as passed if any I2C device is found.
+ * #endif
+ */
+
+#include <post.h>
+#include <i2c.h>
+
+#if CONFIG_POST & CFG_POST_I2C
+
+int i2c_post_test (int flags)
+{
+ unsigned int i;
+ unsigned int good = 0;
+#ifdef I2C_ADDR_LIST
+ unsigned int bad = 0;
+ int j;
+ unsigned char i2c_addr_list[] = I2C_ADDR_LIST;
+ unsigned char i2c_miss_list[] = I2C_ADDR_LIST;
+#endif
+
+ for (i = 0; i < 128; i++) {
+ if (i2c_probe (i) == 0) {
+#ifndef I2C_ADDR_LIST
+ good++;
+#else /* I2C_ADDR_LIST */
+ for (j=0; j<sizeof(i2c_addr_list); ++j) {
+ if (i == i2c_addr_list[j]) {
+ good++;
+ i2c_miss_list[j] = 0xFF;
+ break;
+ }
+ }
+ if (j == sizeof(i2c_addr_list)) {
+ bad++;
+ post_log ("I2C: addr %02X not expected\n",
+ i);
+ }
+#endif /* I2C_ADDR_LIST */
+ }
+ }
+
+#ifndef I2C_ADDR_LIST
+ return good > 0 ? 0 : -1;
+#else /* I2C_ADDR_LIST */
+ if (good != sizeof(i2c_addr_list)) {
+ for (j=0; j<sizeof(i2c_miss_list); ++j) {
+ if (i2c_miss_list[j] != 0xFF) {
+ post_log ("I2C: addr %02X did not respond\n",
+ i2c_miss_list[j]);
+ }
+ }
+ }
+ return ((good == sizeof(i2c_addr_list)) && (bad == 0)) ? 0 : -1;
+#endif
+}
+
+#endif /* CONFIG_POST & CFG_POST_I2C */
+#endif /* CONFIG_POST */
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
new file mode 100644
index 0000000..a2c088b
--- /dev/null
+++ b/post/drivers/memory.c
@@ -0,0 +1,483 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Memory test
+ *
+ * General observations:
+ * o The recommended test sequence is to test the data lines: if they are
+ * broken, nothing else will work properly. Then test the address
+ * lines. Finally, test the cells in the memory now that the test
+ * program knows that the address and data lines work properly.
+ * This sequence also helps isolate and identify what is faulty.
+ *
+ * o For the address line test, it is a good idea to use the base
+ * address of the lowest memory location, which causes a '1' bit to
+ * walk through a field of zeros on the address lines and the highest
+ * memory location, which causes a '0' bit to walk through a field of
+ * '1's on the address line.
+ *
+ * o Floating buses can fool memory tests if the test routine writes
+ * a value and then reads it back immediately. The problem is, the
+ * write will charge the residual capacitance on the data bus so the
+ * bus retains its state briefely. When the test program reads the
+ * value back immediately, the capacitance of the bus can allow it
+ * to read back what was written, even though the memory circuitry
+ * is broken. To avoid this, the test program should write a test
+ * pattern to the target location, write a different pattern elsewhere
+ * to charge the residual capacitance in a differnt manner, then read
+ * the target location back.
+ *
+ * o Always read the target location EXACTLY ONCE and save it in a local
+ * variable. The problem with reading the target location more than
+ * once is that the second and subsequent reads may work properly,
+ * resulting in a failed test that tells the poor technician that
+ * "Memory error at 00000000, wrote aaaaaaaa, read aaaaaaaa" which
+ * doesn't help him one bit and causes puzzled phone calls. Been there,
+ * done that.
+ *
+ * Data line test:
+ * ---------------
+ * This tests data lines for shorts and opens by forcing adjacent data
+ * to opposite states. Because the data lines could be routed in an
+ * arbitrary manner the must ensure test patterns ensure that every case
+ * is tested. By using the following series of binary patterns every
+ * combination of adjacent bits is test regardless of routing.
+ *
+ * ...101010101010101010101010
+ * ...110011001100110011001100
+ * ...111100001111000011110000
+ * ...111111110000000011111111
+ *
+ * Carrying this out, gives us six hex patterns as follows:
+ *
+ * 0xaaaaaaaaaaaaaaaa
+ * 0xcccccccccccccccc
+ * 0xf0f0f0f0f0f0f0f0
+ * 0xff00ff00ff00ff00
+ * 0xffff0000ffff0000
+ * 0xffffffff00000000
+ *
+ * To test for short and opens to other signals on our boards, we
+ * simply test with the 1's complemnt of the paterns as well, resulting
+ * in twelve patterns total.
+ *
+ * After writing a test pattern. a special pattern 0x0123456789ABCDEF is
+ * written to a different address in case the data lines are floating.
+ * Thus, if a byte lane fails, you will see part of the special
+ * pattern in that byte lane when the test runs. For example, if the
+ * xx__xxxxxxxxxxxx byte line fails, you will see aa23aaaaaaaaaaaa
+ * (for the 'a' test pattern).
+ *
+ * Address line test:
+ * ------------------
+ * This function performs a test to verify that all the address lines
+ * hooked up to the RAM work properly. If there is an address line
+ * fault, it usually shows up as two different locations in the address
+ * map (related by the faulty address line) mapping to one physical
+ * memory storage location. The artifact that shows up is writing to
+ * the first location "changes" the second location.
+ *
+ * To test all address lines, we start with the given base address and
+ * xor the address with a '1' bit to flip one address line. For each
+ * test, we shift the '1' bit left to test the next address line.
+ *
+ * In the actual code, we start with address sizeof(ulong) since our
+ * test pattern we use is a ulong and thus, if we tried to test lower
+ * order address bits, it wouldn't work because our pattern would
+ * overwrite itself.
+ *
+ * Example for a 4 bit address space with the base at 0000:
+ * 0000 <- base
+ * 0001 <- test 1
+ * 0010 <- test 2
+ * 0100 <- test 3
+ * 1000 <- test 4
+ * Example for a 4 bit address space with the base at 0010:
+ * 0010 <- base
+ * 0011 <- test 1
+ * 0000 <- (below the base address, skipped)
+ * 0110 <- test 2
+ * 1010 <- test 3
+ *
+ * The test locations are successively tested to make sure that they are
+ * not "mirrored" onto the base address due to a faulty address line.
+ * Note that the base and each test location are related by one address
+ * line flipped. Note that the base address need not be all zeros.
+ *
+ * Memory tests 1-4:
+ * -----------------
+ * These tests verify RAM using sequential writes and reads
+ * to/from RAM. There are several test cases that use different patterns to
+ * verify RAM. Each test case fills a region of RAM with one pattern and
+ * then reads the region back and compares its contents with the pattern.
+ * The following patterns are used:
+ *
+ * 1a) zero pattern (0x00000000)
+ * 1b) negative pattern (0xffffffff)
+ * 1c) checkerboard pattern (0x55555555)
+ * 1d) checkerboard pattern (0xaaaaaaaa)
+ * 2) bit-flip pattern ((1 << (offset % 32))
+ * 3) address pattern (offset)
+ * 4) address pattern (~offset)
+ *
+ * Being run in normal mode, the test verifies only small 4Kb
+ * regions of RAM around each 1Mb boundary. For example, for 64Mb
+ * RAM the following areas are verified: 0x00000000-0x00000800,
+ * 0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800-
+ * 0x04000000. If the test is run in slow-test mode, it verifies
+ * the whole RAM.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CFG_POST_MEMORY
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Define INJECT_*_ERRORS for testing error detection in the presence of
+ * _good_ hardware.
+ */
+#undef INJECT_DATA_ERRORS
+#undef INJECT_ADDRESS_ERRORS
+
+#ifdef INJECT_DATA_ERRORS
+#warning "Injecting data line errors for testing purposes"
+#endif
+
+#ifdef INJECT_ADDRESS_ERRORS
+#warning "Injecting address line errors for testing purposes"
+#endif
+
+
+/*
+ * This function performs a double word move from the data at
+ * the source pointer to the location at the destination pointer.
+ * This is helpful for testing memory on processors which have a 64 bit
+ * wide data bus.
+ *
+ * On those PowerPC with FPU, use assembly and a floating point move:
+ * this does a 64 bit move.
+ *
+ * For other processors, let the compiler generate the best code it can.
+ */
+static void move64(unsigned long long *src, unsigned long long *dest)
+{
+#if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0" ); /* Clobbers fr0 */
+ return;
+#else
+ *dest = *src;
+#endif
+}
+
+/*
+ * This is 64 bit wide test patterns. Note that they reside in ROM
+ * (which presumably works) and the tests write them to RAM which may
+ * not work.
+ *
+ * The "otherpattern" is written to drive the data bus to values other
+ * than the test pattern. This is for detecting floating bus lines.
+ *
+ */
+const static unsigned long long pattern[] = {
+ 0xaaaaaaaaaaaaaaaaULL,
+ 0xccccccccccccccccULL,
+ 0xf0f0f0f0f0f0f0f0ULL,
+ 0xff00ff00ff00ff00ULL,
+ 0xffff0000ffff0000ULL,
+ 0xffffffff00000000ULL,
+ 0x00000000ffffffffULL,
+ 0x0000ffff0000ffffULL,
+ 0x00ff00ff00ff00ffULL,
+ 0x0f0f0f0f0f0f0f0fULL,
+ 0x3333333333333333ULL,
+ 0x5555555555555555ULL
+};
+const unsigned long long otherpattern = 0x0123456789abcdefULL;
+
+
+static int memory_post_dataline(unsigned long long * pmem)
+{
+ unsigned long long temp64 = 0;
+ int num_patterns = sizeof(pattern)/ sizeof(pattern[0]);
+ int i;
+ unsigned int hi, lo, pathi, patlo;
+ int ret = 0;
+
+ for ( i = 0; i < num_patterns; i++) {
+ move64((unsigned long long *)&(pattern[i]), pmem++);
+ /*
+ * Put a different pattern on the data lines: otherwise they
+ * may float long enough to read back what we wrote.
+ */
+ move64((unsigned long long *)&otherpattern, pmem--);
+ move64(pmem, &temp64);
+
+#ifdef INJECT_DATA_ERRORS
+ temp64 ^= 0x00008000;
+#endif
+
+ if (temp64 != pattern[i]){
+ pathi = (pattern[i]>>32) & 0xffffffff;
+ patlo = pattern[i] & 0xffffffff;
+
+ hi = (temp64>>32) & 0xffffffff;
+ lo = temp64 & 0xffffffff;
+
+ post_log ("Memory (date line) error at %08x, "
+ "wrote %08x%08x, read %08x%08x !\n",
+ pmem, pathi, patlo, hi, lo);
+ ret = -1;
+ }
+ }
+ return ret;
+}
+
+static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
+{
+ ulong *target;
+ ulong *end;
+ ulong readback;
+ ulong xor;
+ int ret = 0;
+
+ end = (ulong *)((ulong)base + size); /* pointer arith! */
+ xor = 0;
+ for(xor = sizeof(ulong); xor > 0; xor <<= 1) {
+ target = (ulong *)((ulong)testaddr ^ xor);
+ if((target >= base) && (target < end)) {
+ *testaddr = ~*target;
+ readback = *target;
+
+#ifdef INJECT_ADDRESS_ERRORS
+ if(xor == 0x00008000) {
+ readback = *testaddr;
+ }
+#endif
+ if(readback == *testaddr) {
+ post_log ("Memory (address line) error at %08x<->%08x, "
+ "XOR value %08x !\n",
+ testaddr, target, xor);
+ ret = -1;
+ }
+ }
+ }
+ return ret;
+}
+
+static int memory_post_test1 (unsigned long start,
+ unsigned long size,
+ unsigned long val)
+{
+ unsigned long i;
+ ulong *mem = (ulong *) start;
+ ulong readback;
+ int ret = 0;
+
+ for (i = 0; i < size / sizeof (ulong); i++) {
+ mem[i] = val;
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+ readback = mem[i];
+ if (readback != val) {
+ post_log ("Memory error at %08x, "
+ "wrote %08x, read %08x !\n",
+ mem + i, val, readback);
+
+ ret = -1;
+ break;
+ }
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ return ret;
+}
+
+static int memory_post_test2 (unsigned long start, unsigned long size)
+{
+ unsigned long i;
+ ulong *mem = (ulong *) start;
+ ulong readback;
+ int ret = 0;
+
+ for (i = 0; i < size / sizeof (ulong); i++) {
+ mem[i] = 1 << (i % 32);
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+ readback = mem[i];
+ if (readback != (1 << (i % 32))) {
+ post_log ("Memory error at %08x, "
+ "wrote %08x, read %08x !\n",
+ mem + i, 1 << (i % 32), readback);
+
+ ret = -1;
+ break;
+ }
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ return ret;
+}
+
+static int memory_post_test3 (unsigned long start, unsigned long size)
+{
+ unsigned long i;
+ ulong *mem = (ulong *) start;
+ ulong readback;
+ int ret = 0;
+
+ for (i = 0; i < size / sizeof (ulong); i++) {
+ mem[i] = i;
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+ readback = mem[i];
+ if (readback != i) {
+ post_log ("Memory error at %08x, "
+ "wrote %08x, read %08x !\n",
+ mem + i, i, readback);
+
+ ret = -1;
+ break;
+ }
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ return ret;
+}
+
+static int memory_post_test4 (unsigned long start, unsigned long size)
+{
+ unsigned long i;
+ ulong *mem = (ulong *) start;
+ ulong readback;
+ int ret = 0;
+
+ for (i = 0; i < size / sizeof (ulong); i++) {
+ mem[i] = ~i;
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+ readback = mem[i];
+ if (readback != ~i) {
+ post_log ("Memory error at %08x, "
+ "wrote %08x, read %08x !\n",
+ mem + i, ~i, readback);
+
+ ret = -1;
+ break;
+ }
+ if (i % 1024 == 0)
+ WATCHDOG_RESET ();
+ }
+
+ return ret;
+}
+
+static int memory_post_tests (unsigned long start, unsigned long size)
+{
+ int ret = 0;
+
+ if (ret == 0)
+ ret = memory_post_dataline ((unsigned long long *)start);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_addrline ((ulong *)start, (ulong *)start, size);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_addrline ((ulong *)(start + size - 8),
+ (ulong *)start, size);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test1 (start, size, 0x00000000);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test1 (start, size, 0xffffffff);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test1 (start, size, 0x55555555);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test1 (start, size, 0xaaaaaaaa);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test2 (start, size);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test3 (start, size);
+ WATCHDOG_RESET ();
+ if (ret == 0)
+ ret = memory_post_test4 (start, size);
+ WATCHDOG_RESET ();
+
+ return ret;
+}
+
+int memory_post_test (int flags)
+{
+ int ret = 0;
+ bd_t *bd = gd->bd;
+ unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
+ 256 << 20 : bd->bi_memsize) - (1 << 20);
+
+
+ if (flags & POST_SLOWTEST) {
+ ret = memory_post_tests (CFG_SDRAM_BASE, memsize);
+ } else { /* POST_NORMAL */
+
+ unsigned long i;
+
+ for (i = 0; i < (memsize >> 20) && ret == 0; i++) {
+ if (ret == 0)
+ ret = memory_post_tests (i << 20, 0x800);
+ if (ret == 0)
+ ret = memory_post_tests ((i << 20) + 0xff800, 0x800);
+ }
+ }
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_MEMORY */
+#endif /* CONFIG_POST */
diff --git a/post/drivers/rtc.c b/post/drivers/rtc.c
new file mode 100644
index 0000000..7d4f9b8
--- /dev/null
+++ b/post/drivers/rtc.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * RTC test
+ *
+ * The Real Time Clock (RTC) operation is verified by this test.
+ * The following features are verified:
+ * o) Time uniformity
+ * This is verified by reading RTC in polling within
+ * a short period of time.
+ * o) Passing month boundaries
+ * This is checked by setting RTC to a second before
+ * a month boundary and reading it after its passing the
+ * boundary. The test is performed for both leap- and
+ * nonleap-years.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <rtc.h>
+
+#if CONFIG_POST & CFG_POST_RTC
+
+static int rtc_post_skip (ulong * diff)
+{
+ struct rtc_time tm1;
+ struct rtc_time tm2;
+ ulong start1;
+ ulong start2;
+
+ rtc_get (&tm1);
+ start1 = get_timer (0);
+
+ while (1) {
+ rtc_get (&tm2);
+ start2 = get_timer (0);
+ if (tm1.tm_sec != tm2.tm_sec)
+ break;
+ if (start2 - start1 > 1500)
+ break;
+ }
+
+ if (tm1.tm_sec != tm2.tm_sec) {
+ *diff = start2 - start1;
+
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+static void rtc_post_restore (struct rtc_time *tm, unsigned int sec)
+{
+ time_t t = mktime (tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
+ tm->tm_min, tm->tm_sec) + sec;
+ struct rtc_time ntm;
+
+ to_tm (t, &ntm);
+
+ rtc_set (&ntm);
+}
+
+int rtc_post_test (int flags)
+{
+ ulong diff;
+ unsigned int i;
+ struct rtc_time svtm;
+ static unsigned int daysnl[] =
+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+ static unsigned int daysl[] =
+ { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+ unsigned int ynl = 1999;
+ unsigned int yl = 2000;
+ unsigned int skipped = 0;
+
+ /* Time uniformity */
+ if (rtc_post_skip (&diff) != 0) {
+ post_log ("Timeout while waiting for a new second !\n");
+
+ return -1;
+ }
+
+ for (i = 0; i < 5; i++) {
+ if (rtc_post_skip (&diff) != 0) {
+ post_log ("Timeout while waiting for a new second !\n");
+
+ return -1;
+ }
+
+ if (diff < 950 || diff > 1050) {
+ post_log ("Invalid second duration !\n");
+
+ return -1;
+ }
+ }
+
+ /* Passing month boundaries */
+
+ if (rtc_post_skip (&diff) != 0) {
+ post_log ("Timeout while waiting for a new second !\n");
+
+ return -1;
+ }
+ rtc_get (&svtm);
+
+ for (i = 0; i < 12; i++) {
+ time_t t = mktime (ynl, i + 1, daysnl[i], 23, 59, 59);
+ struct rtc_time tm;
+
+ to_tm (t, &tm);
+ rtc_set (&tm);
+
+ skipped++;
+ if (rtc_post_skip (&diff) != 0) {
+ rtc_post_restore (&svtm, skipped);
+ post_log ("Timeout while waiting for a new second !\n");
+
+ return -1;
+ }
+
+ rtc_get (&tm);
+ if (tm.tm_mon == i + 1) {
+ rtc_post_restore (&svtm, skipped);
+ post_log ("Month %d boundary is not passed !\n", i + 1);
+
+ return -1;
+ }
+ }
+
+ for (i = 0; i < 12; i++) {
+ time_t t = mktime (yl, i + 1, daysl[i], 23, 59, 59);
+ struct rtc_time tm;
+
+ to_tm (t, &tm);
+ rtc_set (&tm);
+
+ skipped++;
+ if (rtc_post_skip (&diff) != 0) {
+ rtc_post_restore (&svtm, skipped);
+ post_log ("Timeout while waiting for a new second !\n");
+
+ return -1;
+ }
+
+ rtc_get (&tm);
+ if (tm.tm_mon == i + 1) {
+ rtc_post_restore (&svtm, skipped);
+ post_log ("Month %d boundary is not passed !\n", i + 1);
+
+ return -1;
+ }
+ }
+ rtc_post_restore (&svtm, skipped);
+
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_RTC */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/Makefile b/post/lib_ppc/Makefile
new file mode 100644
index 0000000..14354a0
--- /dev/null
+++ b/post/lib_ppc/Makefile
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+LIB = libpostppc.a
+
+AOBJS = asm.o
+COBJS = cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
+COBJS += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
+COBJS += store.o load.o cr.o b.o multi.o string.o complex.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/lib_ppc/andi.c b/post/lib_ppc/andi.c
new file mode 100644
index 0000000..7ddf2ab
--- /dev/null
+++ b/post/lib_ppc/andi.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Logic instructions: andi., andis.
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_andi_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong res;
+} cpu_post_andi_table[] =
+{
+ {
+ OP_ANDI_,
+ 0x80008000,
+ 0xffff,
+ 0x00008000
+ },
+ {
+ OP_ANDIS_,
+ 0x80008000,
+ 0xffff,
+ 0x80000000
+ },
+};
+static unsigned int cpu_post_andi_size =
+ sizeof (cpu_post_andi_table) / sizeof (struct cpu_post_andi_s);
+
+int cpu_post_test_andi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_andi_size && ret == 0; i++)
+ {
+ struct cpu_post_andi_s *test = cpu_post_andi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11IX(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at andi test %d !\n", i);
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/asm.S b/post/lib_ppc/asm.S
new file mode 100644
index 0000000..a0815a4
--- /dev/null
+++ b/post/lib_ppc/asm.S
@@ -0,0 +1,346 @@
+/*
+ * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+
+#if CONFIG_POST & CFG_POST_CPU
+
+/* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
+ .global cpu_post_exec_02
+cpu_post_exec_02:
+ mflr r0
+ stwu r0, -4(r1)
+
+ subi r1, r1, 104
+ stmw r6, 0(r1)
+
+ mtlr r3
+ mr r3, r4
+ mr r4, r5
+ blrl
+
+ lmw r6, 0(r1)
+ addi r1, r1, 104
+
+ lwz r0, 0(r1)
+ addi r1, r1, 4
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
+ .global cpu_post_exec_04
+cpu_post_exec_04:
+ mflr r0
+ stwu r0, -4(r1)
+
+ subi r1, r1, 96
+ stmw r8, 0(r1)
+
+ mtlr r3
+ mr r3, r4
+ mr r4, r5
+ mr r5, r6
+ mtxer r7
+ blrl
+
+ lmw r8, 0(r1)
+ addi r1, r1, 96
+
+ lwz r0, 0(r1)
+ addi r1, r1, 4
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
+ .global cpu_post_exec_12
+cpu_post_exec_12:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ mr r3, r5
+ mr r4, r6
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
+ .global cpu_post_exec_11
+cpu_post_exec_11:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ mr r3, r5
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
+ .global cpu_post_exec_21
+cpu_post_exec_21:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ li r0, 0
+ mtxer r0
+ lwz r0, 0(r4)
+ mtcr r0
+
+ mtlr r3
+ mr r3, r6
+ blrl
+
+ mfcr r0
+ lwz r4, 4(r1)
+ stw r0, 0(r4)
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2); */
+ .global cpu_post_exec_22
+cpu_post_exec_22:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ li r0, 0
+ mtxer r0
+ lwz r0, 0(r4)
+ mtcr r0
+
+ mtlr r3
+ mr r3, r6
+ mr r4, r7
+ blrl
+
+ mfcr r0
+ lwz r4, 4(r1)
+ stw r0, 0(r4)
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
+ .global cpu_post_exec_12w
+cpu_post_exec_12w:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ mr r5, r6
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
+ .global cpu_post_exec_11w
+cpu_post_exec_11w:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
+ .global cpu_post_exec_22w
+cpu_post_exec_22w:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r6, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ blrl
+
+ lwz r4, 4(r1)
+ stw r3, 0(r4)
+ lwz r4, 0(r1)
+ stw r5, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
+ .global cpu_post_exec_21w
+cpu_post_exec_21w:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ blrl
+
+ lwz r5, 4(r1)
+ stw r3, 0(r5)
+ lwz r5, 0(r1)
+ stw r4, 0(r5)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
+ .global cpu_post_exec_21x
+cpu_post_exec_21x:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ mtlr r3
+ mr r3, r6
+ blrl
+
+ lwz r5, 4(r1)
+ stw r3, 0(r5)
+ lwz r5, 0(r1)
+ stw r4, 0(r5)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+ ulong cr); */
+ .global cpu_post_exec_31
+cpu_post_exec_31:
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+ stwu r6, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ lwz r4, 0(r5)
+ mr r6, r7
+ blrl
+
+ lwz r7, 8(r1)
+ stw r3, 0(r7)
+ lwz r7, 4(r1)
+ stw r4, 0(r7)
+ lwz r7, 0(r1)
+ stw r5, 0(r7)
+
+ lwz r0, 12(r1)
+ addi r1, r1, 16
+ mtlr r0
+ blr
+
+/* int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n); */
+ .global cpu_post_complex_1_asm
+cpu_post_complex_1_asm:
+ li r9,0
+ cmpw r9,r7
+ bge cpu_post_complex_1_done
+ mtctr r7
+cpu_post_complex_1_loop:
+ mullw r0,r3,r4
+ subf r0,r5,r0
+ divw r0,r0,r6
+ add r9,r9,r0
+ bdnz cpu_post_complex_1_loop
+cpu_post_complex_1_done:
+ mr r3,r9
+ blr
+
+/* int cpu_post_complex_2_asm (int x, int n); */
+ .global cpu_post_complex_2_asm
+cpu_post_complex_2_asm:
+ mr. r0,r4
+ mtctr r0
+ mr r0,r3
+ li r3,1
+ li r4,1
+ blelr
+cpu_post_complex_2_loop:
+ mullw r3,r3,r0
+ add r3,r3,r4
+ bdnz cpu_post_complex_2_loop
+blr
+
+#endif
+#endif
diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c
new file mode 100644
index 0000000..b4b17c8
--- /dev/null
+++ b/post/lib_ppc/b.c
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Branch instructions: b, bl, bc
+ *
+ * The first 2 instructions (b, bl) are verified by jumping
+ * to a fixed address and checking whether control was transfered
+ * to that very point. For the bl instruction the value of the
+ * link register is checked as well (using mfspr).
+ * To verify the bc instruction various combinations of the BI/BO
+ * fields, the CTR and the condition register values are
+ * checked. The list of such combinations is pre-built and
+ * linked in U-Boot at build time.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+ ulong cr);
+
+static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
+ int pjump, int dec, int link, ulong pctr, ulong cr)
+{
+ int ret = 0;
+ ulong lr = 0;
+ ulong ctr = pctr;
+ ulong jump;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(6),
+ ASM_MFLR(6),
+ ASM_MTCTR(3),
+ ASM_MTLR(4),
+ ASM_LI(5, 1),
+ ASM_3O(cmd, bo, bi, 8),
+ ASM_LI(5, 0),
+ ASM_MFCTR(3),
+ ASM_MFLR(4),
+ ASM_MTLR(6),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_31 (code, &ctr, &lr, &jump, cr);
+
+ if (ret == 0)
+ ret = pjump == jump ? 0 : -1;
+ if (ret == 0)
+ {
+ if (dec)
+ ret = pctr == ctr + 1 ? 0 : -1;
+ else
+ ret = pctr == ctr ? 0 : -1;
+ }
+ if (ret == 0)
+ {
+ if (link)
+ ret = lr == (ulong) code + 24 ? 0 : -1;
+ else
+ ret = lr == 0 ? 0 : -1;
+ }
+
+ return ret;
+}
+
+int cpu_post_test_b (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ if (ret == 0)
+ {
+ ulong code[] =
+ {
+ ASM_MFLR(4),
+ ASM_MTLR(3),
+ ASM_B(4),
+ ASM_MFLR(3),
+ ASM_MTLR(4),
+ ASM_BLR,
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, &res, 0);
+
+ ret = res == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at b1 test !\n");
+ }
+ }
+
+ if (ret == 0)
+ {
+ ulong code[] =
+ {
+ ASM_MFLR(4),
+ ASM_MTLR(3),
+ ASM_BL(4),
+ ASM_MFLR(3),
+ ASM_MTLR(4),
+ ASM_BLR,
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, &res, 0);
+
+ ret = res == (ulong)code + 12 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at b2 test !\n");
+ }
+ }
+
+ if (ret == 0)
+ {
+ ulong cc, cd;
+ int cond;
+ ulong ctr;
+ int link;
+
+ i = 0;
+
+ for (cc = 0; cc < 4 && ret == 0; cc++)
+ {
+ for (cd = 0; cd < 4 && ret == 0; cd++)
+ {
+ for (link = 0; link <= 1 && ret == 0; link++)
+ {
+ for (cond = 0; cond <= 1 && ret == 0; cond++)
+ {
+ for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
+ {
+ int dec = cd < 2;
+ int cr = cond ? 0x80000000 : 0x00000000;
+ int jumpc = cc >= 2 ||
+ (cc == 0 && !cond) ||
+ (cc == 1 && cond);
+ int jumpd = cd >= 2 ||
+ (cd == 0 && ctr != 1) ||
+ (cd == 1 && ctr == 1);
+ int jump = jumpc && jumpd;
+
+ ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
+ (cc << 3) + (cd << 1), 0, jump, dec, link,
+ ctr, cr);
+
+ if (ret != 0)
+ {
+ post_log ("Error at b3 test %d !\n", i);
+ }
+
+ i++;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c
new file mode 100644
index 0000000..789a24c
--- /dev/null
+++ b/post/lib_ppc/cmp.c
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions: cmpw, cmplw
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2);
+
+static struct cpu_post_cmp_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong cr;
+ ulong res;
+} cpu_post_cmp_table[] =
+{
+ {
+ OP_CMPW,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPW,
+ 123,
+ 133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPW,
+ 123,
+ -133,
+ 4,
+ 0x04
+ },
+ {
+ OP_CMPLW,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPLW,
+ 123,
+ -133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPLW,
+ 123,
+ 113,
+ 4,
+ 0x04
+ },
+};
+static unsigned int cpu_post_cmp_size =
+ sizeof (cpu_post_cmp_table) / sizeof (struct cpu_post_cmp_s);
+
+int cpu_post_test_cmp (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
+ {
+ struct cpu_post_cmp_s *test = cpu_post_cmp_table + i;
+ unsigned long code[] =
+ {
+ ASM_2C(test->cmd, test->cr, 3, 4),
+ ASM_MFCR(3),
+ ASM_BLR
+ };
+ ulong res;
+
+ cpu_post_exec_12 (code, & res, test->op1, test->op2);
+
+ ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cmp test %d !\n", i);
+ }
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c
new file mode 100644
index 0000000..e0c2aaf
--- /dev/null
+++ b/post/lib_ppc/cmpi.c
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions: cmpwi, cmplwi
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+
+static struct cpu_post_cmpi_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong cr;
+ ulong res;
+} cpu_post_cmpi_table[] =
+{
+ {
+ OP_CMPWI,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPWI,
+ 123,
+ 133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPWI,
+ 123,
+ -133,
+ 4,
+ 0x04
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ -133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ 113,
+ 4,
+ 0x04
+ },
+};
+static unsigned int cpu_post_cmpi_size =
+ sizeof (cpu_post_cmpi_table) / sizeof (struct cpu_post_cmpi_s);
+
+int cpu_post_test_cmpi (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
+ {
+ struct cpu_post_cmpi_s *test = cpu_post_cmpi_table + i;
+ unsigned long code[] =
+ {
+ ASM_1IC(test->cmd, test->cr, 3, test->op2),
+ ASM_MFCR(3),
+ ASM_BLR
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, & res, test->op1);
+
+ ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cmpi test %d !\n", i);
+ }
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/complex.c b/post/lib_ppc/complex.c
new file mode 100644
index 0000000..033584b
--- /dev/null
+++ b/post/lib_ppc/complex.c
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Complex calculations
+ *
+ * The calculations in this test are just a combination of simpler
+ * calculations, but probably under different timing conditions, etc.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n);
+extern int cpu_post_complex_2_asm (int x, int n);
+
+ /*
+ * n
+ * SUM (a1 * a2 - a3) / a4 = n * result
+ * i=1
+ */
+static int cpu_post_test_complex_1 (void)
+{
+ int a1 = 666;
+ int a2 = 667;
+ int a3 = 668;
+ int a4 = 66;
+ int n = 100;
+ int result = 6720; /* (a1 * a2 - a3) / a4 */
+
+ if (cpu_post_complex_1_asm(a1, a2, a3, a4, n) != n * result)
+ {
+ return -1;
+ }
+
+ return 0;
+}
+
+ /* (1 + x + x^2 + ... + x^n) * (1 - x) = 1 - x^(n+1)
+ */
+static int cpu_post_test_complex_2 (void)
+{
+ int ret = -1;
+ int x;
+ int n;
+ int k;
+ int left;
+ int right;
+
+ for (x = -8; x <= 8; x ++)
+ {
+ n = 9;
+
+ left = cpu_post_complex_2_asm(x, n);
+ left *= 1 - x;
+
+ right = 1;
+ for (k = 0; k <= n; k ++)
+ {
+ right *= x;
+ }
+ right = 1 - right;
+
+ if (left != right)
+ {
+ goto Done;
+ }
+ }
+
+ ret = 0;
+ Done:
+
+ return ret;
+}
+
+int cpu_post_test_complex (void)
+{
+ int ret = 0;
+
+ if (ret == 0)
+ {
+ ret = cpu_post_test_complex_1();
+ }
+
+ if (ret == 0)
+ {
+ ret = cpu_post_test_complex_2();
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at complex test !\n");
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/cpu.c b/post/lib_ppc/cpu.c
new file mode 100644
index 0000000..1f2ded2
--- /dev/null
+++ b/post/lib_ppc/cpu.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#ifdef CONFIG_POST
+
+#include <watchdog.h>
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern int cpu_post_test_cmp (void);
+extern int cpu_post_test_cmpi (void);
+extern int cpu_post_test_two (void);
+extern int cpu_post_test_twox (void);
+extern int cpu_post_test_three (void);
+extern int cpu_post_test_threex (void);
+extern int cpu_post_test_threei (void);
+extern int cpu_post_test_andi (void);
+extern int cpu_post_test_srawi (void);
+extern int cpu_post_test_rlwnm (void);
+extern int cpu_post_test_rlwinm (void);
+extern int cpu_post_test_rlwimi (void);
+extern int cpu_post_test_store (void);
+extern int cpu_post_test_load (void);
+extern int cpu_post_test_cr (void);
+extern int cpu_post_test_b (void);
+extern int cpu_post_test_multi (void);
+extern int cpu_post_test_string (void);
+extern int cpu_post_test_complex (void);
+
+ulong cpu_post_makecr (long v)
+{
+ ulong cr = 0;
+
+ if (v < 0)
+ cr |= 0x80000000;
+ if (v > 0)
+ cr |= 0x40000000;
+ if (v == 0)
+ cr |= 0x20000000;
+
+ return cr;
+}
+
+int cpu_post_test (int flags)
+{
+ int ic = icache_status ();
+ int ret = 0;
+
+ WATCHDOG_RESET();
+ if (ic)
+ icache_disable ();
+
+ if (ret == 0)
+ ret = cpu_post_test_cmp ();
+ if (ret == 0)
+ ret = cpu_post_test_cmpi ();
+ if (ret == 0)
+ ret = cpu_post_test_two ();
+ if (ret == 0)
+ ret = cpu_post_test_twox ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_three ();
+ if (ret == 0)
+ ret = cpu_post_test_threex ();
+ if (ret == 0)
+ ret = cpu_post_test_threei ();
+ if (ret == 0)
+ ret = cpu_post_test_andi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_srawi ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwnm ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwinm ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwimi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_store ();
+ if (ret == 0)
+ ret = cpu_post_test_load ();
+ if (ret == 0)
+ ret = cpu_post_test_cr ();
+ if (ret == 0)
+ ret = cpu_post_test_b ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_multi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_string ();
+ if (ret == 0)
+ ret = cpu_post_test_complex ();
+ WATCHDOG_RESET();
+
+ if (ic)
+ icache_enable ();
+
+ WATCHDOG_RESET();
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_CPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/cpu_asm.h b/post/lib_ppc/cpu_asm.h
new file mode 100644
index 0000000..1cbaf41
--- /dev/null
+++ b/post/lib_ppc/cpu_asm.h
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CPU_ASM_H
+#define _CPU_ASM_H
+
+#define BIT_C 0x00000001
+
+#define OP_BLR 0x4e800020
+#define OP_EXTSB 0x7c000774
+#define OP_EXTSH 0x7c000734
+#define OP_NEG 0x7c0000d0
+#define OP_CNTLZW 0x7c000034
+#define OP_ADD 0x7c000214
+#define OP_ADDC 0x7c000014
+#define OP_ADDME 0x7c0001d4
+#define OP_ADDZE 0x7c000194
+#define OP_ADDE 0x7c000114
+#define OP_ADDI 0x38000000
+#define OP_SUBF 0x7c000050
+#define OP_SUBFC 0x7c000010
+#define OP_SUBFE 0x7c000110
+#define OP_SUBFME 0x7c0001d0
+#define OP_SUBFZE 0x7c000190
+#define OP_MFCR 0x7c000026
+#define OP_MTCR 0x7c0ff120
+#define OP_MFXER 0x7c0102a6
+#define OP_MTXER 0x7c0103a6
+#define OP_MCRXR 0x7c000400
+#define OP_MCRF 0x4c000000
+#define OP_CRAND 0x4c000202
+#define OP_CRANDC 0x4c000102
+#define OP_CROR 0x4c000382
+#define OP_CRORC 0x4c000342
+#define OP_CRXOR 0x4c000182
+#define OP_CRNAND 0x4c0001c2
+#define OP_CRNOR 0x4c000042
+#define OP_CREQV 0x4c000242
+#define OP_CMPW 0x7c000000
+#define OP_CMPLW 0x7c000040
+#define OP_CMPWI 0x2c000000
+#define OP_CMPLWI 0x28000000
+#define OP_MULLW 0x7c0001d6
+#define OP_MULHW 0x7c000096
+#define OP_MULHWU 0x7c000016
+#define OP_DIVW 0x7c0003d6
+#define OP_DIVWU 0x7c000396
+#define OP_OR 0x7c000378
+#define OP_ORC 0x7c000338
+#define OP_XOR 0x7c000278
+#define OP_NAND 0x7c0003b8
+#define OP_NOR 0x7c0000f8
+#define OP_EQV 0x7c000238
+#define OP_SLW 0x7c000030
+#define OP_SRW 0x7c000430
+#define OP_SRAW 0x7c000630
+#define OP_ORI 0x60000000
+#define OP_ORIS 0x64000000
+#define OP_XORI 0x68000000
+#define OP_XORIS 0x6c000000
+#define OP_ANDI_ 0x70000000
+#define OP_ANDIS_ 0x74000000
+#define OP_SRAWI 0x7c000670
+#define OP_RLWINM 0x54000000
+#define OP_RLWNM 0x5c000000
+#define OP_RLWIMI 0x50000000
+#define OP_LWZ 0x80000000
+#define OP_LHZ 0xa0000000
+#define OP_LHA 0xa8000000
+#define OP_LBZ 0x88000000
+#define OP_LWZU 0x84000000
+#define OP_LHZU 0xa4000000
+#define OP_LHAU 0xac000000
+#define OP_LBZU 0x8c000000
+#define OP_LWZX 0x7c00002e
+#define OP_LHZX 0x7c00022e
+#define OP_LHAX 0x7c0002ae
+#define OP_LBZX 0x7c0000ae
+#define OP_LWZUX 0x7c00006e
+#define OP_LHZUX 0x7c00026e
+#define OP_LHAUX 0x7c0002ee
+#define OP_LBZUX 0x7c0000ee
+#define OP_STW 0x90000000
+#define OP_STH 0xb0000000
+#define OP_STB 0x98000000
+#define OP_STWU 0x94000000
+#define OP_STHU 0xb4000000
+#define OP_STBU 0x9c000000
+#define OP_STWX 0x7c00012e
+#define OP_STHX 0x7c00032e
+#define OP_STBX 0x7c0001ae
+#define OP_STWUX 0x7c00016e
+#define OP_STHUX 0x7c00036e
+#define OP_STBUX 0x7c0001ee
+#define OP_B 0x48000000
+#define OP_BL 0x48000001
+#define OP_BC 0x40000000
+#define OP_BCL 0x40000001
+#define OP_MTLR 0x7c0803a6
+#define OP_MFLR 0x7c0802a6
+#define OP_MTCTR 0x7c0903a6
+#define OP_MFCTR 0x7c0902a6
+#define OP_LMW 0xb8000000
+#define OP_STMW 0xbc000000
+#define OP_LSWI 0x7c0004aa
+#define OP_LSWX 0x7c00042a
+#define OP_STSWI 0x7c0005aa
+#define OP_STSWX 0x7c00052a
+
+#define ASM_0(opcode) (opcode)
+#define ASM_1(opcode, rd) ((opcode) + \
+ ((rd) << 21))
+#define ASM_1C(opcode, cr) ((opcode) + \
+ ((cr) << 23))
+#define ASM_11(opcode, rd, rs) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16))
+#define ASM_11C(opcode, cd, cs) ((opcode) + \
+ ((cd) << 23) + \
+ ((cs) << 18))
+#define ASM_11X(opcode, rd, rs) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16))
+#define ASM_11I(opcode, rd, rs, simm) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16) + \
+ ((simm) & 0xffff))
+#define ASM_11IF(opcode, rd, rs, simm) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16) + \
+ ((simm) << 11))
+#define ASM_11S(opcode, rd, rs, sh) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((sh) << 11))
+#define ASM_11IX(opcode, rd, rs, imm) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((imm) & 0xffff))
+#define ASM_12(opcode, rd, rs1, rs2) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs1) << 16) + \
+ ((rs2) << 11))
+#define ASM_12F(opcode, fd, fs1, fs2) ((opcode) + \
+ ((fd) << 21) + \
+ ((fs1) << 16) + \
+ ((fs2) << 11))
+#define ASM_12X(opcode, rd, rs1, rs2) ((opcode) + \
+ ((rs1) << 21) + \
+ ((rd) << 16) + \
+ ((rs2) << 11))
+#define ASM_2C(opcode, cr, rs1, rs2) ((opcode) + \
+ ((cr) << 23) + \
+ ((rs1) << 16) + \
+ ((rs2) << 11))
+#define ASM_1IC(opcode, cr, rs, imm) ((opcode) + \
+ ((cr) << 23) + \
+ ((rs) << 16) + \
+ ((imm) & 0xffff))
+#define ASM_122(opcode, rd, rs1, rs2, imm1, imm2) \
+ ((opcode) + \
+ ((rs1) << 21) + \
+ ((rd) << 16) + \
+ ((rs2) << 11) + \
+ ((imm1) << 6) + \
+ ((imm2) << 1))
+#define ASM_113(opcode, rd, rs, imm1, imm2, imm3) \
+ ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((imm1) << 11) + \
+ ((imm2) << 6) + \
+ ((imm3) << 1))
+#define ASM_1O(opcode, off) ((opcode) + (off))
+#define ASM_3O(opcode, bo, bi, off) ((opcode) + \
+ ((bo) << 21) + \
+ ((bi) << 16) + \
+ (off))
+
+#define ASM_ADDI(rd, rs, simm) ASM_11I(OP_ADDI, rd, rs, simm)
+#define ASM_BLR ASM_0(OP_BLR)
+#define ASM_STW(rd, rs, simm) ASM_11I(OP_STW, rd, rs, simm)
+#define ASM_LWZ(rd, rs, simm) ASM_11I(OP_LWZ, rd, rs, simm)
+#define ASM_MFCR(rd) ASM_1(OP_MFCR, rd)
+#define ASM_MTCR(rd) ASM_1(OP_MTCR, rd)
+#define ASM_MFXER(rd) ASM_1(OP_MFXER, rd)
+#define ASM_MTXER(rd) ASM_1(OP_MTXER, rd)
+#define ASM_MFCTR(rd) ASM_1(OP_MFCTR, rd)
+#define ASM_MTCTR(rd) ASM_1(OP_MTCTR, rd)
+#define ASM_MCRXR(cr) ASM_1C(OP_MCRXR, cr)
+#define ASM_MCRF(cd, cs) ASM_11C(OP_MCRF, cd, cs)
+#define ASM_B(off) ASM_1O(OP_B, off)
+#define ASM_BL(off) ASM_1O(OP_BL, off)
+#define ASM_MFLR(rd) ASM_1(OP_MFLR, rd)
+#define ASM_MTLR(rd) ASM_1(OP_MTLR, rd)
+#define ASM_LI(rd, imm) ASM_ADDI(rd, 0, imm)
+#define ASM_LMW(rd, rs, simm) ASM_11I(OP_LMW, rd, rs, simm)
+#define ASM_STMW(rd, rs, simm) ASM_11I(OP_STMW, rd, rs, simm)
+#define ASM_LSWI(rd, rs, simm) ASM_11IF(OP_LSWI, rd, rs, simm)
+#define ASM_LSWX(rd, rs1, rs2) ASM_12(OP_LSWX, rd, rs1, rs2)
+#define ASM_STSWI(rd, rs, simm) ASM_11IF(OP_STSWI, rd, rs, simm)
+#define ASM_STSWX(rd, rs1, rs2) ASM_12(OP_STSWX, rd, rs1, rs2)
+
+
+#endif /* _CPU_ASM_H */
diff --git a/post/lib_ppc/cr.c b/post/lib_ppc/cr.c
new file mode 100644
index 0000000..da6ef37
--- /dev/null
+++ b/post/lib_ppc/cr.c
@@ -0,0 +1,356 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Condition register istructions: mtcr, mfcr, mcrxr,
+ * crand, crandc, cror, crorc, crxor,
+ * crnand, crnor, creqv, mcrf
+ *
+ * The mtcrf/mfcr instructions is tested by loading different
+ * values into the condition register (mtcrf), moving its value
+ * to a general-purpose register (mfcr) and comparing this value
+ * with the expected one.
+ * The mcrxr instruction is tested by loading a fixed value
+ * into the XER register (mtspr), moving XER value to the
+ * condition register (mcrxr), moving it to a general-purpose
+ * register (mfcr) and comparing the value of this register with
+ * the expected one.
+ * The rest of instructions is tested by loading a fixed
+ * value into the condition register (mtcrf), executing each
+ * instruction several times to modify all 4-bit condition
+ * fields, moving the value of the conditional register to a
+ * general-purpose register (mfcr) and comparing it with the
+ * expected one.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3);
+
+static ulong cpu_post_cr_table1[] =
+{
+ 0xaaaaaaaa,
+ 0x55555555,
+};
+static unsigned int cpu_post_cr_size1 =
+ sizeof (cpu_post_cr_table1) / sizeof (ulong);
+
+static struct cpu_post_cr_s2 {
+ ulong xer;
+ ulong cr;
+} cpu_post_cr_table2[] =
+{
+ {
+ 0xa0000000,
+ 1
+ },
+ {
+ 0x40000000,
+ 5
+ },
+};
+static unsigned int cpu_post_cr_size2 =
+ sizeof (cpu_post_cr_table2) / sizeof (struct cpu_post_cr_s2);
+
+static struct cpu_post_cr_s3 {
+ ulong cr;
+ ulong cs;
+ ulong cd;
+ ulong res;
+} cpu_post_cr_table3[] =
+{
+ {
+ 0x01234567,
+ 0,
+ 4,
+ 0x01230567
+ },
+ {
+ 0x01234567,
+ 7,
+ 0,
+ 0x71234567
+ },
+};
+static unsigned int cpu_post_cr_size3 =
+ sizeof (cpu_post_cr_table3) / sizeof (struct cpu_post_cr_s3);
+
+static struct cpu_post_cr_s4 {
+ ulong cmd;
+ ulong cr;
+ ulong op1;
+ ulong op2;
+ ulong op3;
+ ulong res;
+} cpu_post_cr_table4[] =
+{
+ {
+ OP_CRAND,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRAND,
+ 0x0000ffff,
+ 16,
+ 17,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRANDC,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRANDC,
+ 0x0000ffff,
+ 16,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CROR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CROR,
+ 0x0000ffff,
+ 0,
+ 1,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRORC,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRORC,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRXOR,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRXOR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRNAND,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRNAND,
+ 0x0000ffff,
+ 16,
+ 17,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRNOR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRNOR,
+ 0x0000ffff,
+ 0,
+ 1,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CREQV,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CREQV,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+};
+static unsigned int cpu_post_cr_size4 =
+ sizeof (cpu_post_cr_table4) / sizeof (struct cpu_post_cr_s4);
+
+int cpu_post_test_cr (void)
+{
+ int ret = 0;
+ unsigned int i;
+ unsigned long cr_sav;
+
+ asm ( "mfcr %0" : "=r" (cr_sav) : );
+
+ for (i = 0; i < cpu_post_cr_size1 && ret == 0; i++)
+ {
+ ulong cr = cpu_post_cr_table1[i];
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, cr);
+
+ ret = res == cr ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr1 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size2 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s2 *test = cpu_post_cr_table2 + i;
+ ulong res;
+ ulong xer;
+
+ unsigned long code[] =
+ {
+ ASM_MTXER(3),
+ ASM_MCRXR(test->cr),
+ ASM_MFCR(3),
+ ASM_MFXER(4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_21x (code, &res, &xer, test->xer);
+
+ ret = xer == 0 && ((res << (4 * test->cr)) & 0xe0000000) == test->xer ?
+ 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr2 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size3 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s3 *test = cpu_post_cr_table3 + i;
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_MCRF(test->cd, test->cs),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, test->cr);
+
+ ret = res == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr3 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size4 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s4 *test = cpu_post_cr_table4 + i;
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_12F(test->cmd, test->op3, test->op1, test->op2),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, test->cr);
+
+ ret = res == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr4 test %d !\n", i);
+ }
+ }
+
+ asm ( "mtcr %0" : : "r" (cr_sav));
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/load.c b/post/lib_ppc/load.c
new file mode 100644
index 0000000..393c568
--- /dev/null
+++ b/post/lib_ppc/load.c
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load instructions: lbz(x)(u), lhz(x)(u), lha(x)(u), lwz(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the array contents, the value of the index
+ * register and the expected value of the destination register.
+ * After executing the instruction, the test verifies the
+ * value of the destination register and the value of the base
+ * register (it must change for "load with update" instructions).
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
+extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
+
+static struct cpu_post_load_s
+{
+ ulong cmd;
+ uint width;
+ int update;
+ int index;
+ ulong offset;
+} cpu_post_load_table[] =
+{
+ {
+ OP_LWZ,
+ 4,
+ 0,
+ 0,
+ 4
+ },
+ {
+ OP_LHA,
+ 3,
+ 0,
+ 0,
+ 2
+ },
+ {
+ OP_LHZ,
+ 2,
+ 0,
+ 0,
+ 2
+ },
+ {
+ OP_LBZ,
+ 1,
+ 0,
+ 0,
+ 1
+ },
+ {
+ OP_LWZU,
+ 4,
+ 1,
+ 0,
+ 4
+ },
+ {
+ OP_LHAU,
+ 3,
+ 1,
+ 0,
+ 2
+ },
+ {
+ OP_LHZU,
+ 2,
+ 1,
+ 0,
+ 2
+ },
+ {
+ OP_LBZU,
+ 1,
+ 1,
+ 0,
+ 1
+ },
+ {
+ OP_LWZX,
+ 4,
+ 0,
+ 1,
+ 4
+ },
+ {
+ OP_LHAX,
+ 3,
+ 0,
+ 1,
+ 2
+ },
+ {
+ OP_LHZX,
+ 2,
+ 0,
+ 1,
+ 2
+ },
+ {
+ OP_LBZX,
+ 1,
+ 0,
+ 1,
+ 1
+ },
+ {
+ OP_LWZUX,
+ 4,
+ 1,
+ 1,
+ 4
+ },
+ {
+ OP_LHAUX,
+ 3,
+ 1,
+ 1,
+ 2
+ },
+ {
+ OP_LHZUX,
+ 2,
+ 1,
+ 1,
+ 2
+ },
+ {
+ OP_LBZUX,
+ 1,
+ 1,
+ 1,
+ 1
+ },
+};
+static unsigned int cpu_post_load_size =
+ sizeof (cpu_post_load_table) / sizeof (struct cpu_post_load_s);
+
+int cpu_post_test_load (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ for (i = 0; i < cpu_post_load_size && ret == 0; i++)
+ {
+ struct cpu_post_load_s *test = cpu_post_load_table + i;
+ uchar data[16] =
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+ ulong base0 = (ulong) (data + 8);
+ ulong base = base0;
+ ulong value;
+
+ if (test->index)
+ {
+ ulong code[] =
+ {
+ ASM_12(test->cmd, 5, 3, 4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_22w (code, &base, test->offset, &value);
+ }
+ else
+ {
+ ulong code[] =
+ {
+ ASM_11I(test->cmd, 4, 3, test->offset),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_21w (code, &base, &value);
+ }
+
+ if (ret == 0)
+ {
+ if (test->update)
+ ret = base == base0 + test->offset ? 0 : -1;
+ else
+ ret = base == base0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ switch (test->width)
+ {
+ case 1:
+ ret = *(uchar *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 2:
+ ret = *(ushort *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 3:
+ ret = *(short *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 4:
+ ret = *(ulong *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ }
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at load test %d !\n", i);
+ }
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/multi.c b/post/lib_ppc/multi.c
new file mode 100644
index 0000000..8724384
--- /dev/null
+++ b/post/lib_ppc/multi.c
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store multiple word instructions: lmw, stmw
+ *
+ * 26 consecutive words are loaded from a source memory buffer
+ * into GPRs r6 through r31. After that, 26 consecutive words are stored
+ * from the GPRs r6 through r31 into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+
+int cpu_post_test_multi (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ if (ret == 0)
+ {
+ ulong src [26], dst [26];
+
+ ulong code[] =
+ {
+ ASM_LMW(5, 3, 0),
+ ASM_STMW(5, 4, 0),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src) / sizeof(src[0]); i ++)
+ {
+ src[i] = i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at multi test !\n");
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/rlwimi.c b/post/lib_ppc/rlwimi.c
new file mode 100644
index 0000000..f65f79a
--- /dev/null
+++ b/post/lib_ppc/rlwimi.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwimi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwimi_s
+{
+ ulong cmd;
+ ulong op0;
+ ulong op1;
+ uchar op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwimi_table[] =
+{
+ {
+ OP_RLWIMI,
+ 0xff00ffff,
+ 0x0000aa00,
+ 8,
+ 8,
+ 15,
+ 0xffaaffff
+ },
+};
+static unsigned int cpu_post_rlwimi_size =
+ sizeof (cpu_post_rlwimi_table) / sizeof (struct cpu_post_rlwimi_s);
+
+int cpu_post_test_rlwimi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwimi_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwimi_s *test = cpu_post_rlwimi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -20),
+ ASM_STW(3, stk, 8),
+ ASM_STW(4, stk, 12),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg1, stk, 8),
+ ASM_LWZ(reg0, stk, 12),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 20),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -20),
+ ASM_STW(3, stk, 8),
+ ASM_STW(4, stk, 12),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg1, stk, 8),
+ ASM_LWZ(reg0, stk, 12),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me) |
+ BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 20),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwimi test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwimi test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/rlwinm.c b/post/lib_ppc/rlwinm.c
new file mode 100644
index 0000000..e240c41
--- /dev/null
+++ b/post/lib_ppc/rlwinm.c
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwinm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwinm_s
+{
+ ulong cmd;
+ ulong op1;
+ uchar op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwinm_table[] =
+{
+ {
+ OP_RLWINM,
+ 0xffff0000,
+ 24,
+ 16,
+ 23,
+ 0x0000ff00
+ },
+};
+static unsigned int cpu_post_rlwinm_size =
+ sizeof (cpu_post_rlwinm_table) / sizeof (struct cpu_post_rlwinm_s);
+
+int cpu_post_test_rlwinm (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwinm_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwinm_s *test = cpu_post_rlwinm_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb,
+ test->me) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwinm test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwinm test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/rlwnm.c b/post/lib_ppc/rlwnm.c
new file mode 100644
index 0000000..523cf4d
--- /dev/null
+++ b/post/lib_ppc/rlwnm.c
@@ -0,0 +1,165 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwnm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwnm_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwnm_table[] =
+{
+ {
+ OP_RLWNM,
+ 0xffff0000,
+ 24,
+ 16,
+ 23,
+ 0x0000ff00
+ },
+};
+static unsigned int cpu_post_rlwnm_size =
+ sizeof (cpu_post_rlwnm_table) / sizeof (struct cpu_post_rlwnm_s);
+
+int cpu_post_test_rlwnm (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwnm_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwnm_s *test = cpu_post_rlwnm_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me) |
+ BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwnm test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwnm test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/srawi.c b/post/lib_ppc/srawi.c
new file mode 100644
index 0000000..91c82c9
--- /dev/null
+++ b/post/lib_ppc/srawi.c
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: srawi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_srawi_s
+{
+ ulong cmd;
+ ulong op1;
+ uchar op2;
+ ulong res;
+} cpu_post_srawi_table[] =
+{
+ {
+ OP_SRAWI,
+ 0x8000,
+ 3,
+ 0x1000
+ },
+ {
+ OP_SRAWI,
+ 0x80000000,
+ 3,
+ 0xf0000000
+ },
+};
+static unsigned int cpu_post_srawi_size =
+ sizeof (cpu_post_srawi_table) / sizeof (struct cpu_post_srawi_s);
+
+int cpu_post_test_srawi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_srawi_size && ret == 0; i++)
+ {
+ struct cpu_post_srawi_s *test = cpu_post_srawi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11S(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11S(test->cmd, reg1, reg0, test->op2) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at srawi test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at srawi test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/store.c b/post/lib_ppc/store.c
new file mode 100644
index 0000000..f495bf2
--- /dev/null
+++ b/post/lib_ppc/store.c
@@ -0,0 +1,235 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Store instructions: stb(x)(u), sth(x)(u), stw(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the value of the index register and
+ * the value of the source register. After executing the
+ * instruction, the test verifies the contents of the array
+ * and the value of the base register (it must change for "store
+ * with update" instructions).
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);
+extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);
+
+static struct cpu_post_store_s
+{
+ ulong cmd;
+ uint width;
+ int update;
+ int index;
+ ulong offset;
+ ulong value;
+} cpu_post_store_table[] =
+{
+ {
+ OP_STW,
+ 4,
+ 0,
+ 0,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STH,
+ 2,
+ 0,
+ 0,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STB,
+ 1,
+ 0,
+ 0,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWU,
+ 4,
+ 1,
+ 0,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHU,
+ 2,
+ 1,
+ 0,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBU,
+ 1,
+ 1,
+ 0,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWX,
+ 4,
+ 0,
+ 1,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHX,
+ 2,
+ 0,
+ 1,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBX,
+ 1,
+ 0,
+ 1,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWUX,
+ 4,
+ 1,
+ 1,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHUX,
+ 2,
+ 1,
+ 1,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBUX,
+ 1,
+ 1,
+ 1,
+ -1,
+ 0xff
+ },
+};
+static unsigned int cpu_post_store_size =
+ sizeof (cpu_post_store_table) / sizeof (struct cpu_post_store_s);
+
+int cpu_post_test_store (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ for (i = 0; i < cpu_post_store_size && ret == 0; i++)
+ {
+ struct cpu_post_store_s *test = cpu_post_store_table + i;
+ uchar data[16] =
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+ ulong base0 = (ulong) (data + 8);
+ ulong base = base0;
+
+ if (test->index)
+ {
+ ulong code[] =
+ {
+ ASM_12(test->cmd, 5, 3, 4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_12w (code, &base, test->offset, test->value);
+ }
+ else
+ {
+ ulong code[] =
+ {
+ ASM_11I(test->cmd, 4, 3, test->offset),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11w (code, &base, test->value);
+ }
+
+ if (ret == 0)
+ {
+ if (test->update)
+ ret = base == base0 + test->offset ? 0 : -1;
+ else
+ ret = base == base0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ switch (test->width)
+ {
+ case 1:
+ ret = *(uchar *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ case 2:
+ ret = *(ushort *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ case 4:
+ ret = *(ulong *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ }
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at store test %d !\n", i);
+ }
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/string.c b/post/lib_ppc/string.c
new file mode 100644
index 0000000..bd83bd1
--- /dev/null
+++ b/post/lib_ppc/string.c
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store string instructions: lswi, stswi, lswx, stswx
+ *
+ * Several consecutive bytes from a source memory buffer are loaded
+ * left to right into GPRs. After that, the bytes are stored
+ * from the GPRs into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+extern void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3,
+ ulong op4);
+
+#include <bedbug/regs.h>
+int cpu_post_test_string (void)
+{
+ int ret = 0;
+ unsigned int i;
+
+ if (ret == 0)
+ {
+ char src [31], dst [31];
+
+ ulong code[] =
+ {
+ ASM_LSWI(5, 3, 31),
+ ASM_STSWI(5, 4, 31),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src); i ++)
+ {
+ src[i] = (char) i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ char src [95], dst [95];
+
+ ulong code[] =
+ {
+ ASM_LSWX(8, 3, 5),
+ ASM_STSWX(8, 4, 5),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src); i ++)
+ {
+ src[i] = (char) i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_04(code, (ulong)src, (ulong)dst, 0, sizeof(src));
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at string test !\n");
+ }
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/three.c b/post/lib_ppc/three.c
new file mode 100644
index 0000000..c2d7476
--- /dev/null
+++ b/post/lib_ppc/three.c
@@ -0,0 +1,259 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rD,rA,rB
+ *
+ * Arithmetic instructions: add, addc, adde, subf, subfc, subfe,
+ * mullw, mulhw, mulhwu, divw, divwu
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_three_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong res;
+} cpu_post_three_table[] =
+{
+ {
+ OP_ADD,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADD,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_ADDC,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADDC,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_ADDE,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADDE,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_SUBF,
+ 100,
+ 200,
+ 100
+ },
+ {
+ OP_SUBF,
+ 300,
+ 200,
+ -100
+ },
+ {
+ OP_SUBFC,
+ 100,
+ 200,
+ 100
+ },
+ {
+ OP_SUBFC,
+ 300,
+ 200,
+ -100
+ },
+ {
+ OP_SUBFE,
+ 100,
+ 200,
+ 200 + ~100
+ },
+ {
+ OP_SUBFE,
+ 300,
+ 200,
+ 200 + ~300
+ },
+ {
+ OP_MULLW,
+ 200,
+ 300,
+ 200 * 300
+ },
+ {
+ OP_MULHW,
+ 0x10000000,
+ 0x10000000,
+ 0x1000000
+ },
+ {
+ OP_MULHWU,
+ 0x80000000,
+ 0x80000000,
+ 0x40000000
+ },
+ {
+ OP_DIVW,
+ -20,
+ 5,
+ -4
+ },
+ {
+ OP_DIVWU,
+ 0x8000,
+ 0x200,
+ 0x40
+ },
+};
+static unsigned int cpu_post_three_size =
+ sizeof (cpu_post_three_table) / sizeof (struct cpu_post_three_s);
+
+int cpu_post_test_three (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_three_size && ret == 0; i++)
+ {
+ struct cpu_post_three_s *test = cpu_post_three_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12(test->cmd, reg2, reg1, reg0),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12(test->cmd, reg2, reg1, reg0) | BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at three test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at three test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/threei.c b/post/lib_ppc/threei.c
new file mode 100644
index 0000000..79f0178
--- /dev/null
+++ b/post/lib_ppc/threei.c
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rA,rS,UIMM
+ *
+ * Logic instructions: ori, oris, xori, xoris
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threei_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong res;
+} cpu_post_threei_table[] =
+{
+ {
+ OP_ORI,
+ 0x80000000,
+ 0xffff,
+ 0x8000ffff
+ },
+ {
+ OP_ORIS,
+ 0x00008000,
+ 0xffff,
+ 0xffff8000
+ },
+ {
+ OP_XORI,
+ 0x8000ffff,
+ 0xffff,
+ 0x80000000
+ },
+ {
+ OP_XORIS,
+ 0x00008000,
+ 0xffff,
+ 0xffff8000
+ },
+};
+static unsigned int cpu_post_threei_size =
+ sizeof (cpu_post_threei_table) / sizeof (struct cpu_post_threei_s);
+
+int cpu_post_test_threei (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_threei_size && ret == 0; i++)
+ {
+ struct cpu_post_threei_s *test = cpu_post_threei_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11IX(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threei test %d !\n", i);
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/threex.c b/post/lib_ppc/threex.c
new file mode 100644
index 0000000..2c72063
--- /dev/null
+++ b/post/lib_ppc/threex.c
@@ -0,0 +1,229 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rA,rS,rB
+ *
+ * Logic instructions: or, orc, xor, nand, nor, eqv
+ * Shift instructions: slw, srw, sraw
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threex_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong res;
+} cpu_post_threex_table[] =
+{
+ {
+ OP_OR,
+ 0x1234,
+ 0x5678,
+ 0x1234 | 0x5678
+ },
+ {
+ OP_ORC,
+ 0x1234,
+ 0x5678,
+ 0x1234 | ~0x5678
+ },
+ {
+ OP_XOR,
+ 0x1234,
+ 0x5678,
+ 0x1234 ^ 0x5678
+ },
+ {
+ OP_NAND,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 & 0x5678)
+ },
+ {
+ OP_NOR,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 | 0x5678)
+ },
+ {
+ OP_EQV,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 ^ 0x5678)
+ },
+ {
+ OP_SLW,
+ 0x80,
+ 16,
+ 0x800000
+ },
+ {
+ OP_SLW,
+ 0x80,
+ 32,
+ 0
+ },
+ {
+ OP_SRW,
+ 0x800000,
+ 16,
+ 0x80
+ },
+ {
+ OP_SRW,
+ 0x800000,
+ 32,
+ 0
+ },
+ {
+ OP_SRAW,
+ 0x80000000,
+ 3,
+ 0xf0000000
+ },
+ {
+ OP_SRAW,
+ 0x8000,
+ 3,
+ 0x1000
+ },
+};
+static unsigned int cpu_post_threex_size =
+ sizeof (cpu_post_threex_table) / sizeof (struct cpu_post_threex_s);
+
+int cpu_post_test_threex (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_threex_size && ret == 0; i++)
+ {
+ struct cpu_post_threex_s *test = cpu_post_threex_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12X(test->cmd, reg2, reg1, reg0),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12X(test->cmd, reg2, reg1, reg0) | BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threex test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threex test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/two.c b/post/lib_ppc/two.c
new file mode 100644
index 0000000..cfbac5e
--- /dev/null
+++ b/post/lib_ppc/two.c
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions instr rD,rA
+ *
+ * Logic instructions: neg
+ * Arithmetic instructions: addme, addze, subfme, subfze
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_two_s
+{
+ ulong cmd;
+ ulong op;
+ ulong res;
+} cpu_post_two_table[] =
+{
+ {
+ OP_NEG,
+ 3,
+ -3
+ },
+ {
+ OP_NEG,
+ 5,
+ -5
+ },
+ {
+ OP_ADDME,
+ 6,
+ 5
+ },
+ {
+ OP_ADDZE,
+ 5,
+ 5
+ },
+ {
+ OP_SUBFME,
+ 6,
+ ~6 - 1
+ },
+ {
+ OP_SUBFZE,
+ 5,
+ ~5
+ },
+};
+static unsigned int cpu_post_two_size =
+ sizeof (cpu_post_two_table) / sizeof (struct cpu_post_two_s);
+
+int cpu_post_test_two (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_two_size && ret == 0; i++)
+ {
+ struct cpu_post_two_s *test = cpu_post_two_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11(test->cmd, reg1, reg0),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11(test->cmd, reg1, reg0) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at two test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at two test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/lib_ppc/twox.c b/post/lib_ppc/twox.c
new file mode 100644
index 0000000..48d9954
--- /dev/null
+++ b/post/lib_ppc/twox.c
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions instr rA,rS
+ *
+ * Logic instructions: cntlzw
+ * Arithmetic instructions: extsb, extsh
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CFG_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_twox_s
+{
+ ulong cmd;
+ ulong op;
+ ulong res;
+} cpu_post_twox_table[] =
+{
+ {
+ OP_EXTSB,
+ 3,
+ 3
+ },
+ {
+ OP_EXTSB,
+ 0xff,
+ -1
+ },
+ {
+ OP_EXTSH,
+ 3,
+ 3
+ },
+ {
+ OP_EXTSH,
+ 0xff,
+ 0xff
+ },
+ {
+ OP_EXTSH,
+ 0xffff,
+ -1
+ },
+ {
+ OP_CNTLZW,
+ 0x000fffff,
+ 12
+ },
+};
+static unsigned int cpu_post_twox_size =
+ sizeof (cpu_post_twox_table) / sizeof (struct cpu_post_twox_s);
+
+int cpu_post_test_twox (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_twox_size && ret == 0; i++)
+ {
+ struct cpu_post_twox_s *test = cpu_post_twox_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11X(test->cmd, reg1, reg0),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11X(test->cmd, reg1, reg0) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at twox test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at twox test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+#endif
diff --git a/post/post.c b/post/post.c
index e1066da..ac41990 100644
--- a/post/post.c
+++ b/post/post.c
@@ -430,6 +430,7 @@
#ifdef CONFIG_PPC
return (unsigned long)get_ticks () / (get_tbclk () / CFG_HZ) - base;
#else
+#warning "Not implemented yet"
return 0; /* Not implemented yet */
#endif
}