commit 95ef47cf02d49a59d8dbc59a9ff78a7b4861419d
author Jagan Teki <jagan@amarulasolutions.com> Sun Aug 05 00:40:07 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Fri Sep 28 22:09:24 2018 +0530
tree 4c9b1428d591c1f6baf0d999e4f2460a2073400a
parent de4e126a3b618e2e512e73392d0583e56a65519a

ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3

Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date:   Fri Apr 20 12:21:12 2018 +0200

    ARM: dts: sun4i: Fix incorrect clocks for displays

Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun4i-a10-marsboard.dts

diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
index 8e50723..0dbf695 100644
--- a/arch/arm/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/dts/sun4i-a10-marsboard.dts
@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "HAOYU Electronics Marsboard A10";
@@ -62,8 +61,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_marsboard>;
 
 		red1 {
 			label = "marsboard:red1:usr";
@@ -108,27 +105,19 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
 	phy = <&phy1>;
 	status = "okay";
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -141,12 +130,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -163,18 +149,10 @@
 };
 
 &pio {
-	led_pins_marsboard: led_pins@0 {
-		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PH4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 };
 
@@ -188,14 +166,14 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };